Comprehensive p4 laboratory

Comprehensive p4 laboratory, Total:125 items.

The international standard classification for "Comprehensive p4 laboratory" includes: Laboratory medicine , Education , Electrical and electronic testing , Occupational safety. Industrial hygiene , Test conditions and procedures in general .

The Chinese standard classification for "Comprehensive p4 laboratory" includes: Medical laboratory equipment , Special instruments for teaching , Hygiene, safety and labor protection , Labor sanitation , Comprehensive Technology , Sanitation in general .

未注明发布机构

AS/NZS 2243.6:2010 Safety in laboratories - Plant and equipment aspects
AS/NZS 2243.3:2010
CSA ISO 15190:2021 Medical laboratories — Requirements for safety

Group Standards of the People's Republic of China

T/SZTIC 001-2021 Laboratory Safety Management Evaluation
T/CPPC 1080.3-2024 Guidelines on construction and evaluation of smart laboratory Part 3: biosafety laboratory
T/LZZLXH 032-2020 Specification for safety management in laboratory
T/QGCML 076-2020 Laboratory safety education and training system

Professional Standard - Commodity Inspection

SN/T 3253.2-2015 Test method of sanitary wares - Part 2: For 1oad resistance
SN/T 4248-2015 Technical specification for safety testing laboratorory of light industrial products-Ceramic laboratorory

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2151-2016 Laboratory Safety Management Guide

Professional Standard - Machinery

JB/T 5524-1991 Safety rules for laser in laboratories

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 29472-2012 Safety management specification for mobile laboratory
GB 19781-2005 Medical laboratories—Requirements for safety
GB 19489-2004 Laboratories―General requirements for biosafety
GB/T 21747-2008 Educational laboratory equipment—Safety requirements and test methods for laboratory workbenches
GB 19489-2008 Laboratories - General Requirements for Biosafety
GB 4793.7-2001 Safety requirements for electrical equipment for measurement,control and laboratory use--Particular requirements for laboratory centrifuges
GB 27421-2015(英文版) Mobile laboratories—General requirements for biosafety

Professional Standard - Hygiene

WS/T 442-2014 Guideline for clinical laboratory biosafety
WS/T 442-2024 Clinical Laboratory Biosafety Guidelines
WS/T 251-2005 Guidelines for Clinical Laboratory Safety

Taiwan Provincial Standard of the People's Republic of China

CNS 8174-1981 Laboratory Glassware: Connections with Spherial Joint

Professional Standard - Petroleum

SY 6014-1994 Petroleum Geology Laboratory Safety Regulations
SY 6014-2010 Safety Regulations for Petroleum Geology Laboratory

国家能源局

SY/T 6014-2019 Safety regulations for petroleum geology laboratory

中国石油天然气总公司

SY/T 6014-1994 Safety regulations for petroleum geology laboratories

Hebei Provincial Standard of the People's Republic of China

DB13/T 5756-2023 Safety management specifications for hydrogen-related laboratories

Liaoning Provincial Standard of the People's Republic of China

DB21/T 1969-2012 Mobile laboratory safety management specification

Fujian Provincial Standard of the People's Republic of China

DB35/T 971-2009 Testing Laboratory Safety Management Requirements

Professional Standard - Agriculture

CNAS-AL23-2020 Relationship between good laboratory practice and laboratory accreditation

SCC

AS 2243.7:1980 Safety in laboratories - Electrical aspects
AS 2243.2:1990 Safety in laboratories - Chemical aspects
AS 2243.6:1980 Code of practice for safety in laboratories - Mechanical aspects
AS/NZS 2243.2:1997 Safety in laboratories, Part 2: Chemical aspects
CAN 2-200.2-M79-1979 Model of the common useful surface area for P4 and A4 format paper
AS 2243.2:1982 Safety in laboratories - Chemical
AS 2243.1:1990 Safety in laboratories - General
AS 2243.1:1982 Safety in laboratories - General
AWWA ACE70998 Comprehensive Bench Scale Testing of Taste and Odor Control Technologies
AS 2243.8:1992 Safety in laboratories - Fume cupboards
AS 2243.8:1986 Safety in laboratories - Fume cupboards
AS 2243.3:1985 Safety in laboratories - Microbiology
CAN/CSA-Z15190-2005(R2010) Medical Laboratories - Requirements for Safety
DANSK DS/ISO 15190:2020 Medical laboratories – Requirements for safety
AS 2243.4:1986 Safety in laboratories - Ionizing radiations
AS 2243.3:1991 Safety in laboratories - Microbiology
AS 2243.5:1980 Safety in laboratories - Non-ionizing radiations
AS 2243.10:1993 Safety in laboratories - Storage of chemicals
AS 2243.5:1993 Safety in laboratories - Non-ionizing radiations
AS 2243.9:1991 Safety in laboratories - Recirculating fume cabinets
AWWA JAW34265 Journal AWWA — Laboratory Management: Facing the Challenges of the Future
BS 3202:1959 Recommendations on laboratory furniture & fittings
BS EN 61010-2-020:1995 Safety requirements for electrical equipment for measurement, control and laboratory use-Particular requirements for laboratory centrifuges
AS 2243.1:1979 Safety in laboratories, Part 1: General
AS 2243.2:1979 Code of practice for safety in laboratories - Chemical
AS/NZS 2243.1:1997 Safety in laboratories, Part 1: General
SN-CEN/TS 17441:2020 Laboratory installations — Ventilation systems in laboratories
BS PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
DANSK DS/CEN/TS 17441:2020 Laboratory installations – Ventilation systems in laboratories

German Institute for Standardization

DIN 12912:1977 Laboratory furniture; ceramic tiles for laboratory bench tops
DIN 12916:1995 Laboratory furniture - Large size tiles for laboratory bench tops
DIN 25425-5:1994 Radioisotope laboratories - Rules for the decontamination of surfaces

Canadian General Standards Board （CGSB)

CGSB 200.2-M79-CAN/CGSB-1979 Common Image Area for Paper Sizes P4 and A4

Standard Association of Australia （SAA）

AS/NZS 2243.2:2006 Safety in laboratories - Chemical aspects
AS/NZS 2243.8:2014 Laboratory safety fume hood
AS/NZS 2243.10:2004 Safety in laboratories - Storage of chemicals
AS 2243.7:1991 Safety in laboratories - Electrical aspects
AS 2243.4:1998 Safety in laboratories - Ionizing radiations

Military Standards (MIL-STD)

DOD A-A-53746-1988 WATCH GLASS, LABORATORY

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE QC-06-038-2006 Laboratory Testing of Full-Scale In-Duct Gas Air Cleaners

NZ-SNZ

AS/NZS 2243.1:2005 Safety in Laboratories Part 1: Planning and operational aspects

Underwriters Laboratories (UL)

UL 1262 BULLETIN-2002 UL Standard for Safety Laboratory Equipment
UL 1262 BULLETIN-2003 UL Standard for Safety Laboratory Equipment
UL 1805-2006 UL Standard for Safety Laboratory Hoods and Cabinets
UL 1805-2002 UL Standard for Safety Laboratory Hoods and Cabinets First Edition; Reprint with Revisions Through and Including June 2, 2006 [Superseded: UL SUBJECT 1805]
UL 1805 BULLETIN-2000 UL Standard for Safety Laboratory Hoods and Cabinets
UL 1805 BULLETIN-2006 UL Standard for Safety Laboratory Hoods and Cabinets
UL 61010A-2-020 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Centrifuges

IX-SA

AS/NZS 2243.8:2006 Laboratory Safety Part 8: Fume Hoods

HU-MSZT

MNOSZ 6650-1952 Double-sided thermal drying cabinet for laboratory use

YU-JUS

JUS U.J6.047-1982 Laboratory measurements ofimpact sound insulation offloors

IN-BIS

IS 4209-1966 Chemistry Laboratory Safety Code
IS 4906-1968 Radiochemistry Laboratory Safety Practices

GOST

GOST R ISO 15190-2023 Medical laboratories. Requirements for safety

International Organization for Standardization (ISO)

ISO 15190:2003 Medical laboratories - Requirements for safety
ISO 15190:2020 Medical laboratories — Requirements for safety
ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
ISO/TR 22869:2005 Medical laboratories - Guidance on laboratory implementation of ISO 15189:2003

GSO

GSO ISO 7056:2007 Plastics laboratory ware - Beakers
GSO ISO 15190:2015 Medical laboratories -- Requirements for safety
BH GSO ISO 15190:2017 Medical laboratories -- Requirements for safety
GSO ISO 15195:2012 Laboratory medicine -- Requirements for reference measurement laboratories
SY/T 6014-2010 Safety regulations for petroleum geology laboratories

American Society for Testing and Materials (ASTM)

ASTM D6275-98 Standard Practice for Laboratory Testing of Bridge Decks
ASTM E2014-99(2005) Standard Guide on Metallographic Laboratory Safety
ASTM E2014-99 Standard Guide on Metallographic Laboratory Safety
ASTM E2014-17 Standard Guide on Metallographic Laboratory Safety
ASTM D6275-98(2003) Standard Practice for Laboratory Testing of Bridge Decks (Withdrawn 2004)
ASTM E2014-11 Standard Guide on Metallographic Laboratory Safety

ES-UNE

UNE-ISO 15190:2022 Medical laboratories — Requirements for safety

British Standards Institution (BSI)

BS ISO 15190:2020 Medical laboratories. Requirements for safety
BS ISO 15190:2003 Medical laboratories - Requirements for safety
BS EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for laboratory centrifuges

Korean Agency for Technology and Standards (KATS)

KS P ISO 15190:2021 Medical laboratories — Requirement for safety
KS P ISO 15190:2010 Medical laboratories－Requirements for safety
KS P ISO 15190-2010(2016) Medical laboratories－Requirements for safety
KS B 6875-2005 Earth-moving machinery－Roll-over protective structures－Laboratory tests and performance requirements
KS P ISO 15195-2014(2019) Laboratory medicine — Requirements for reference measurement laboratories
KS P ISO 15195:2007 Laboratory medicine-Requirements for reference measurement laboratories
KS P ISO 15195:2014 Laboratory medicine — Requirements for reference measurement laboratories

KR-KS

KS P ISO 15190-2021 Medical laboratories — Requirement for safety

TH-TISI

TIS 2276-2006 Medical laboratories.requirements for safety
TIS 2277-2006 Laboratory medicine.requirements for reference measurement laboratories

GOSTR

GOST R 52905-2007 Mеdical laboratories. Requirements for safety

CZ-CSN

CSN 30 3440-1974 Brake lining laboratory quality control
CSN 36 4901-1967 Electrical apparatus for use in laboratories. Safety regulations.
CSN 01 8003-1985 Safety code for working in laboratories
CSN 66 8002-1965 Safety code for handling with explosives in laboratories

Association Francaise de Normalisation

NF EN 15154-1:2006 Safety showers for laboratories - Part 1: body showers connected to the water network used in laboratories
NF S92-062:2004 Laboratory medicine - Requirements for reference measurement laboratories.
XP X15-300*XP CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE LO-09-076-2009 The Role of Plants in the Reduction of Heat Flux through Green Roofs: Laboratory Experiments

US-FCR

FCR FED H-08-4 VOL 3 SEC I 339-1988 LABORATORY GAS ALARM PANEL SCHEDULE

US-HHS

HHS 21 CFR PART 58-2011 GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES

CN-DB 4

DB4206/T 60-2023 Safety management practices for laboratory gas cylinders

Others: Comprehensive p4 laboratory