temporary plasticizer

temporary plasticizer, Total:164 items.

The international standard classification for "temporary plasticizer" includes: Rubber compounding ingredients , Surface active agents , Solvents , Physicochemical methods of analysis , Plastics in general , Cement. Gypsum. Lime. Mortar .

The Chinese standard classification for "temporary plasticizer" includes: Chemical additive , Basic standards and general methods for chemical additive , Industrial dust and gas prevention technology , Basic standards and general methods for synthetic resin and plastic , Oxide and elementary substance .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1658-1982 Determination of ash of plasticizers
GB/T 1676-1981 Determinating the iodine value of plasticizers
GB/T 1676-2008 Determinating the iodine value of plasticizers
GB/T 1670-2008 Plasticizers-test method of heat-resistance
GB/T 24802-2009 Rubber plasticizer A
GB/T 1663-2001 Plasticizers--Determination of crystallizing point
GB/T 1677-2023 Determinating the epoxy value of plasticizers
GB 1666-1988 Plasticizers--Determination of density
GB/T 1677-2008 Determinating the epoxy value of plasticizers

Professional Standard - Chemical Industry

HG/T 4615-2014 Plasticizer-Tri-n-butyl citrate
HG/T 4453-2012 Plastics - Technical Control Code for the Use of Plasticizers
HG/T 4454-2012 Plastics - Determination of Migration of Plasticizers
HG/T 4386-2012 Plasticizer Epoxidized Soybean Oil

Professional Standard - Construction Industry

JG/T 426-2013 Plasticizer for Plastering Mortar
JG/T 164-2004 Masonry mortar plasticizer

Group Standards of the People's Republic of China

T/AQB 50-2023 Environmentally friendly composite plasticizer
T/ZJBMQA 017-2020 Plasticizer for dry-mixed mortar
T/SDXJ 005-2025 Bio-based rubber plasticizers

Shandong Provincial Standard of the People's Republic of China

DB37/T 2057-2012 Plasticizer epoxy soybean oil

AASHTO - American Association of State Highway and Transportation Officials

DIVISION II SEC 30-1996 Thermoplastic Pipe (Interim 1998)
DIVISION I 10.12-1996 Flexural Members (Interim 1999; Interim 2000;)
DIVISION II SECTION 3-1996 Temporary Works
DIVISION II 3.5-1996 Temporary Bridges
DIVISION II 20.6-1996 Temporary Railing
DIVISION I 7.6-1996 General (Interim 1997)
DIVISION I 7.3-1996 Piers (Interim 1997)
DIVISION I 7.1-1996 General (Interim 1997)
DIVISION II 10.8-1996 Ducts (Interim 1998)
DIVISION II 11.5-1996 Assembly (Interim 1998)
DIVISION II 30.4-1996 Assembly (Interim 1998)
DIVISION II 3.1-1996 General (Interim 1997)

Korean Agency for Technology and Standards (KATS)

KS I 3262-2016 Recycled plastics temporary fences
KS I 3262-2014 Recycled plastics temporary fences
KS I 3275-2014 Recycled plastics temporary distribution board boxes
KS I 3275-2016 Recycled plastics temporary distribution board boxes
KS M ISO 177:2003 Plastics-Determination of migration of plasticizers
KS M ISO 177-2018 Plastics — Determination of migration of plasticizers
KS M ISO 177:2018 Plastics — Determination of migration of plasticizers
KS M ISO 177-2023 Plastics — Determination of migration of plasticizers
KS M ISO 177-2018(2023) Plastics — Determination of migration of plasticizers
KS A IEC 61018:2012 High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes
KS P 5206-1978 Dental temporary stopping

Bureau of Indian Standards

IS 1153-2021 Temporary Corrosion Preventives Hard Film Solvent Deposited
IS 14779-2000 General Purpose Oil Based Temporary Corrosion Preventives
IS 1154-2022 Temporary Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing â€• Specification
IS 958-2020 Temporary Corrosion Preventives, Grease Type, Soft Film ? Specification ( Third Revision )
IS 8758-2013 Fire Precautionary Measures in Construction of Temporary Structures and Pandals - Code of Practice

German Institute for Standardization

DIN 53405:1962 Testing plasticizers in plastics to determine migration of plasticizers from plasticized plastics
DIN 54802-2 E:2013-09 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 2: Statical method
DIN 54802-2:2015-07 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 2: Statical method
DIN 53400:1988-06 Testing of plasticizers; determination of physical and chemical characteristics of plasticizers
DIN 7723:1971 Plasticizer abbreviation
DIN 54802-1:2015-07 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 1: Planetary mixer method
DIN 54802-1 E:2013-09 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 1: Planetary mixer method
DIN 54802-2 E:2013 Draft Document - Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 2: Statical method
DIN 54802-1 E:2013 Draft Document - Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 1: Planetary mixer method
DIN 7723:1968 Plastic plasticizer abbreviation
DIN 53400:1988 Testing of plasticizers; determination of physical and chemical characteristics of plasticizers
DIN 53400:1970 Testing of plasticizers; determination of physical and chemical characteristics of plasticizers
DIN EN ISO 177:2017-05 Plastics - Determination of migration of plasticizers (ISO 177:2016); German version EN ISO 177:2017
DIN EN ISO 177:1999 Plastics - Determination of migration of plasticizers (ISO 177:1988); German version EN ISO 177:1999
DIN EN ISO 177 E:2016-09 Determination of dispersibility of plastic plasticizers (draft)

Standard Association of Australia （SAA）

INT 61-1944 Interim Specification for Temporary Corrosion Preventives
INT 89-1945 Interim Specification for Fungicides and Associated Materials
INT 370-1953 Interim Specification for Adhesives for Fruit Case Labels
AS 4687.2:2022 Temporary fencing and hoardings, Part 2: Temporary fencing and temporary pedestrian barriers
AS 4687.3:2022 Temporary fencing and hoardings, Part 3: Temporary hoardings
INT 56-1949 Interim Specification for Kalsomine
AS 4687.4:2022 Temporary fencing and hoardings, Part 4: Temporary swimming pool fencing

Society of Automotive Engineers (SAE)

SAE AMS7202 Temporary Protective Coating and Remover
SAE AMS7202-2021 Temporary Protective Coating and Remover
SAE AMS1388A-2018 Remover, Temporary Coating Alkaline Type, Water Base
SAE AMS1388-1992 Remover@ Temporary Coating Alkaline Type@ Water Base
SAE AMS1388A-1998 Remover, Temporary Coating Alkaline Type, Water Base

RO-ASRO

STAS 7863-1967 Plasticizer
STAS 6807-1963 plastic. Plasticizer transfer assay
SR ISO 177:1995 Plastics - Determination of megration of plasticizers
STAS SR ISO 1043-3:1995 Plastics Symbols Part 3: Plasticizers

Military Standards (MIL-STD)

DOD A-A-54496-1991 PACEMAKER, CARDIAC NON-INVASIVE, TEMPORARY, DESK TOP TYPE

IN-BIS

IS 1153-1975 Specifications for Temporary Preservatives, Fluids, Durocoats, and Solvent Depositions
IS 10493-1983 Preservative test methods for temporary preservatives
IS 6049-1971 Procedure for applying temporary antiseptics
IS 6050-1971 Specification for Temporary Preservatives Peelable Hot-Dip Type
IS 1154-1957 Specifications for temporary preservatives, fluids, soft films, solvent deposition, and water displacement
IS 1674-1960 Specification for Temporary Protection against Corrosion, Fluids, Soft Films, and Solvent Depositions

YU-JUS

JUS G.C0.013-1991 Plastics - Symbols - Plasticizers

CZ-CSN

CSN 03 8403-1986 Agente of temporary protection against corrosion. Method of determínation of solvents content
CSN ISO 177:1994 Plastics. Determination of migration of plasticizers
CSN 03 8209-1983 Tempórary protection agents against corrosion of metals. Classification and marking

The American Road & Transportation Builders Association

AASHTO DIVISION I 18.4 Plastic Pipe Interim 1997; Interim 1998; Interim 2000(Standard Specifications for Highway Bridges, Div. 1 - Design)
AASHTO DIVISION I 14.5 General Requirements for Bearings Interim 1997; Interim 1998; Interim 2000
AASHTO DIVISION I 7.5 Abutments Interim 1997; Interim 2000
AASHTO DIVISION I 14.6 Special Design Provisions for Bearings Interim 1997; Interim 1998; Interim 2000
AASHTO HB-17 DIVISION II SEC 3-2002 Division II Construction - Temporary Works
AASHTO DIVISION I SEC 18 Soil-Thermoplastic Pipe Interaction Systems Interim 1997; Interim 1998; Interim 2000(Standard Specifications for Highway Bridges, Div. 1 - Design)
AASHTO DIVISION II 18.6 Corrosion Protection Interim 1997; Interim 1998
AASHTO PS-2007 AASHTO Provisional Standards
AASHTO DIVISION I 5.8 Mechanically Stabilized Earth Wall Design Interim 1997; Interim 1998; Interim 1999
AASHTO DIVISION I 10.61 Constructibility Interim 1997; Interim 2000
AASHTO CHBTW AMD 1-2008 Construction Handbook for Bridge Temporary Works (Revision 1; 2008 Interim Revision)

Gosstandart of Russia

GOST 8728-1988 Plasticizers. Specifications
GOST 14926-1981 Plastics. Method for determination of plasticizers migration

GM North America

GM 9981806-2002 Adhesive Two Part Acrylic Temporary Bonding
GM 9985709-2013 Temporary Rubber Lubricant for Use in Tire Mounting (Issue 3)
GM 9981808-2002 Adhesive Two Part Acrylic Temporary Bonding Shown on 9981806
GM 9981807-2002 Adhesive Two Part Acrylic Temporary Bonding Shown on 9981806

National Association of Corrosion Engineers (NACE)

NACE SP0487-2007 Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection Item No. 21037
NACE RP0487-2000 Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection Item No. 21037

CO-ICONTEC

ICONTEC 3305-1992 plastic. Estimation of plasticizers in plastics

British Standards Institution (BSI)

BS 573, 574, 1995, 1996, 2535, 2536, 3647:1973 Specifications for plasticizer esters
BS EN ISO 177:1990 Plastics - Determination of migration of plasticizers
BS EN ISO 177:2000 Plastics - Determination of migration of plasticizers
BS 4887:1973 Specification for mortar plasticizers
BS EN ISO 177:2017 Plastics. Determination of migration of plasticizers
BS EN ISO 1043-3:1999 Plastics - Symbols and abbreviated terms - Plasticizers
BS EN ISO 1043-3:2016 Plastics. Symbols and abbreviated terms. Plasticizers
BS 4835:1973(2011) Methods of test for Plasticizer esters
BS 4835:1973 Methods of test for plasticizer esters
BS 5975-1:2024 Temporary works - Management procedures for the control of temporary works. Code of practice

VE-FONDONORMA

NORVWN 76-61-1966 Interim specification for gas additives in concrete

SE-SIS

SIS 16 17 07-1970 Plastics. Determination of migration of plasticizers
SIS 16 17 03-1970 Plastics. Determination of the loss of plasticizers bv activated carbon

International Organization for Standardization (ISO)

ISO 177:1976 Plastics — Determination of migration of plasticizers
ISO 177:1988 Plastics; determination of migration of plasticizers
ISO 177:2016 Plastics - Determination of migration of plasticizers
ISO 1043-3:1988 Plastics; symbols; part 3: plasticizers

Ente Nazionale Italiano di Unificazione

UNI EN ISO 177:2017 Plastics - Determination of migration of plasticizers
UNI EN ISO 177:2001 Plastics - Determination of migration of plasticizers

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 177:2007 Plastic – Determination of migration of plasticizers.

PL-PKN

PN C89401-1988 Plasticizers Methods of test

South African Bureau of Standard

SANS 1169:2008 Temporary stands
SANS 1169:1978 Temporary stands

Spanish Association for Standardization (UNE)

UNE 53-277 Pt.3-1991 Plastics. Symbols. Part 3. Plasticizers

TR-TSE

TS 984-1971 PLASTICS DETERMINATION OF MIGRATION OF PLASTICIZERS

Standards Norway

NS 9502:1985 Plastics — Determination of migration of plasticizers
NS-EN ISO 177:1999 Plastics — Determination of migration of plasticizers (ISO 177:1988)

Association Francaise de Normalisation

NF T51-025*NF EN ISO 177:2017 Plastics - Determination of migration of plasticizers
NF T50-050-3:1989 PLASTICS. SYMBOLS. PART 3 : PLASTICIZERS.
NF EN ISO 177:2017 Plastics - Determination of plasticizer migration
NF T51-025:1963 PLASTICS. DETERMINATION OF THE MIGRATION OF PLASTICIZERS.
NF T51-025:1999 Plastics. Determination of migration of plasticizers.
XP P98-454:2003 Road equipment - Plastic temporary lane safety devices - Characteristics and specifications