Is epoxy resin flammable?

Is epoxy resin flammable?, Total:445 items.

The international standard classification for "Is epoxy resin flammable?" includes: Products of the chemical industry , Thermosetting materials , Plastics , Reinforced plastics , Paints and varnishes , Surface active agents , Steels profiles , Masonry , Waterproofing , Hydraulic energy engineering , Textiles , Materials for aerospace construction .

The Chinese standard classification for "Is epoxy resin flammable?" includes: Basic standards and general methods for synthetic resin and plastic , Synthetic resin and plastic , Fibre reinforced composites , Coating , Chemical additive , Profile steel and deformed steel , Masonry engineering , Roof and pavement waterproof and barrier material , Decorative material , Water power engineering , Nonmetallic materials used for aviation and aerospace , Composite materials and solid fuels .

Group Standards of the People's Republic of China

T/JCS 05-2021 Epoxy concrete inspection manhole cover
T/CPCIF 0247-2023 Propanetriol（glycerines）by-produced epoxy resin
T/DLSHXH 006-2017 High solid epoxy resin antirust paint
T/CPCIF 0354-2024 By-product glycidyl ether of epoxy resin
T/CPCIF 0068-2020 Industrial sodium chloride produced by epoxy resin
T/CIESC 55-2023 Flame retardant chemical—brominated epoxy resin
T/CPCIF 0351-2024 Epoxy resins curing agents—Phenol-formaldehyde resins
T/CPCIF 0246-2023 Curing agent for epoxy resin—Polyether polysulfan

未注明发布机构

NAVY MIL-DTL-85052/1C NOTICE 3-2019 Clamp, Loop, Tube 17-7 PH CRES, 275 Degrees F, Fuel and Petroleum Based Hydraulic Fluid Resistant
FORD ESH-M2G271-A-1988 ADHESIVE, EPOXY - ONE COMPONENT - POURABLE
FORD M3D112-A-1989 EPOXY LAMINATING RESIN, TWO COMPONENT
FORD M3D35-A-1989 EPOXY RESIN-FILLED (FOR FERROUS CASTING REPAIR)
DNV-CP-0089-2022 Epoxy Resin Systems Type Approval Procedure
FORD ESB-M2P120-A-2000 PAINT PERFORMANCE - NON-VISIBLE CORROSION RESISTANT, EPOXY POWDER COATINGS
FORD WSB-M2G372-A-1995 ADHESIVE, EXTRUDABLE EPOXY BASED, THUMB GRADE FORM, STRUCTURAL
NAVY MIL-PRF-85582E NOTICE 1-2019 Primer Coatings: Epoxy, Waterborne
FORD M3D115-A-1989 EPOXY - SURFACE OR GEL COAT
FORD M3D26-A-1990 EPOXY THERMOSETTING LAMINATING RESIN AND HARDENER - PLASTIC TOOL MANUFACTURE
FORD ESE-M8G231-A3-2000 GASKET, STAINLESS STEEL, EPOXY RESIN COATED

Taiwan Provincial Standard of the People's Republic of China

CNS 4935-1986 Epoxy Resin Non-Zinc Primer
CNS 13065-1992 Methods of Test for Viscosity of Epoxy Resins and Hardeners
CNS 13067-1992 Methods of Test for Epoxy Equivalent of Epoxy Resins
CNS 6796-1984 3.3 KV}t3 33 KV Epoxy-resin Post Insulators for Indoor Use
CNS 11585-1986 Method of Test for Tar Epoxy Resin Paints
CNS 13066-1992 Methods of Test for Softening Point of Epoxy Resins
CNS 10561-1985 Epoxy Resin-Impregnated Glass Cloth (Pre-Preg) for Multilayer Printed Circuits
CNS 10141-1994 Epoxy Injection Adhesives for Repairing in Buildings
CNS 8012-1987 Method of Test for Epoxy Resin Paint
CNS 4939-1986 Tar Epoxy Resin Paints
CNS 11582-1986 Method of Test for Epoxy Resin Non-Zinc Primer
CNS 11583-1986 Method of Test for Epoxy Resin Zinc Primer
CNS 4936-1986 Epoxy Resin Zinc Primer
CNS 4938-1987 Epoxy Resin Paint

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12007.4-1989 Epoxide resins-Determination of viscosity
GB 12007.2-1989 Method for Determination of Sodium Ion in Epoxy Resin
GB/T 31293-2025 Vacuum resin infusion molding epoxy for wind blade
GB/T 13657-1992 Bipenol-A epoxy resins
GB/T 12007.6-1989 Epoxide resins-Determination of softening point-Ring and ball method
GB/T 41928-2022 Plastics—Epoxy resins—Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
GB/T 1630-1989 Epoxide resins－Designation
GB/T 31293-2014 Vacuum resin infusion molding epoxy for wind blade
GB/T 12007.2-1989 Epoxide resins-Determination of sodium ion
GB/T 22314-2008 Plastics - Epoxide resins - Determination of viscosity
GB/T 1630.2-2023 Plastics—Epoxy resins—Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
GB/T 41929-2022 Plastics—Epoxy resins—Test methods
GB/T 12007.7-1989 Determination of gelation time of epoxide resins
GB/T 1630.1-2008 Plastics - Epoxy resins - Part 1: Designation
GB 12007.3-1989 Method for Determination of Total Chlorine Content of Epoxy Resin
GB 12007.6-1989 Method for Determination of Softening Point of Epoxy Resin by Ring and Ball Method
GB/T 12007.3-1989 Epoxide resins-Determination of total chlorine content
GB 12007.7-1989 Determination of gelation time of epoxide resins
GB/T 13657-2011 Bisphenol-A epoxy resin

Professional Standard - Chemical Industry

HG/T 6276-2024 Bisphenol F epoxy resin
HG/T 4765-2014 Epoxy resin for coatings
HG/T 3875-2006 Phenol aldehyde amine epoxy resin firming agent
HG/T 4566-2013 Epoxy Resin Primer
HG/T 2817-1996 Industrial 1,4- Oxygen and Nitrogen Heterocyclic Hexane (Morpholine)
HG/T 4759-2014 Water-based epoxy anticorrosive coatings
HG/T 5876-2021 Epoxy vinyl ester resin

Military Standard of the People's Republic of China-General Armament Department

GJB 9243-2017 680 Epoxy Resin Specification
GJB 3945-2000 Specification for Aramid/Epoxy Prepregs
GJB 3945A-2021 Specification for Aramid/Epoxy Prepregs
GJB 1191-1991 General specification for phenolic epoxy resins

Professional Standard - Construction Industry

JG 3042-1997 Epoxy resin coated steel bars
JG/T 502-2016 Epoxy Resin Coated Steel Bars

Professional Standard - Building Materials

JC/T 2217-2014 Epoxy resin waterproof coating
JC/T 2630-2021 Epoxy grouting mortar
JC/T 1015-2006 Epoxy resin flooring coating

Professional Standard - Energy and Power Planning

DL/T 5193-2004（条文说明） Technical code of epoxy resin mortar(explanation)
DL/T 5193-2004 Technical code of epoxy resin mortar
DL/T 5193-2021 Technical specification of epoxy resin mortar

Professional Standard - Machinery

JB/T 13574-2018 Resin based reactive compounds used for electrical insulation Epozy-drop-impregnating resins
JB/T 13575-2018 Resin based reactive compounds used for electrical insulation 一Epoxy continuous dip-impregnating resins

Professional Standard - Aviation

HB 7069-2007 Specification for epoxy glass fabric prepegs
HB 7772-2005 Specification for epoxy resin carbon fiber prepregs

U.S. Military Regulations and Norms

ARMY MIL-R-47025 A NOTICE 1-1996 RESIN, CASTING, FIRE RETARDANT, EPOXY BASE
ARMY MIL-R-47025 A-1991 RESIN, CASTING, FIRE RETARDANT, EPOXY BASE
ARMY A-A-59785-2005 EPOXY COATING KIT (EPOXY RESIN SYSTEM)
ARMY QPL-4556-QPD-2010 Coating Kit, Epoxy, for Interior of Steel Fuel Tanks
ARMY A-A-50272-1997 ADHESIVES, EPOXY
ARMY QPL-53030-QPD-2012 Primer Coating, Epoxy, Water Reducible, Lead and Chromate Free
ARMY A-A-59109 B-2001 ADHESIVE, EPOXY RESIN BASE
ARMY A-A-59109 B VALID NOTICE 1-2006 ADHESIVE, EPOXY RESIN BASE
ARMY A-A-56032 D VALID NOTICE 1-2009 Ink, Marking, Epoxy Base
ARMY MIL-R-47004 VALID NOTICE 1-1990 RESIN, EPOXY BASE, THIXOTROPIC
ARMY MIL-R-47004-1974 RESIN, EPOXY BASE, THIXOTROPIC
ARMY A-A-59387-2003 REMOVER, POLYURETHANE/EPOXY PAINT
ARMY MIL-C-47224 B-1993 COMPOUND MOLDING, TRANSFER, EPOXY RESIN, SINGLE-COMPONENT
ARMY MIL-C-47224 B NOTICE 1-1996 COMPOUND MOLDING, TRANSFER, EPOXY RESIN, SINGLE-COMPONENT

American Concrete Institute

ACI SP-21 Epoxy Resins
ACI 503.1-92(R2003) Revised Standards on Epoxy
ACI 503.1-503.4-1992 Four Epoxy Standards
ACI 548.15-2020 Specification for Crack Repair by Epoxy Injection

Society of Automotive Engineers (SAE)

SAE AMS3599A-1991 Plastic Sheet@ Copper Faced Glass Fabric Reinforced Epoxy Resin@ Flammability Controlled
SAE AMS3705 Epoxy Resin, Cycloaliphatic Liquid
SAE AMS3705A-2014 EPOXY RESIN, CYCLOALIPHATIC LIQUID
SAE AMS3705A-2022 Epoxy Resin, Cycloaliphatic Liquid
SAE AMS3705-2011 EPOXY RESIN, CYCLOALIPHATIC LIQUID
SAE AMS3705A Epoxy Resin, Cycloaliphatic Liquid
SAE AMS3599A-2004 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin, Flammability Controlled
SAE AMS3599-2011 PLASTIC SHEET, COPPER FACED Glass Fabric Reinforced Epoxy Resin, Flammability Controlled
SAE AMS3705A-1993 Epoxy Resin, Cycloaliphatic Liquid
SAE AMS3705-1985 EPOXY RESIN@ CYCLOALIPHATIC LIQUID (Reaffirmed)
SAE AMS3145B Paints, Marking Epoxy
SAE AMS3143A Powder Coating Materials, Epoxy
SAE AMS3145B-1998 PAINT, MARKING Epoxy
SAE AMS3145A-1978 PAINT, MARKING Epoxy
SAE AMS3145-1970 PAINT, MARKING, EPOXY
SAE AMS3145 Paint, Marking Epoxy
SAE AMS3145A Paint, Marking Epoxy
SAE AMS3145D Paint, Marking Epoxy
SAE AMS3145C-2004 Paint, Marking Epoxy
SAE AMS3143-1999 Powder Coating Materials@ Epoxy
SAE AMS3143 Powder Coating Materials, Epoxy
SAE AMS3145C Paint, Marking Epoxy
SAE AMS3706A Epoxy Resin, Polyfunctional Solid
SAE AMS3706B Epoxy Resin, Polyfunctional Solid
SAE AMS3706A-1993 EPOXY RESIN, POLYFUNCTIONAL SOLID
SAE AMS3867 Boron Filament Tape, Epoxy-Resin-Impregnated
SAE AMS3867B Boron Filament Tape, Epoxy-Resin-Impregnated
SAE AMS3706-1985 EPOXY RESIN, POLYFUNCTIONAL SOLID
SAE AMS3599B-2011 Plastic Sheet, Copper-Faced, Glass Fabric Reinforced Epoxy Resin, Flammability Controlled
SAE AMS3706B-1995 EPOXY RESIN@ POLYFUNCTIONAL SOLID
SAE AMS3867A Boron Filament Tape, Epoxy-Resin-Impregnated
SAE AMS3867C Boron Filament Tape, Epoxy-Resin-Impregnated
SAE AMS3706 Epoxy Resin, Polyfunctional Solid
SAE AMS3727 Resin, Epoxy, Matrix, Thermosetting Moderate Temperatureresistant, Unfilled
SAE AMS3727A Resin, Epoxy, Matrix, Thermosetting Moderate Temperatureresistant, Unfilled
SAE AMS3821C-2015 Cloth, Type "E" Glass, "B" Stage Epoxy-Resin-Impregnated 7781 Style Fabric, Flame Resistant
SAE AMS3821 Cloth, Type "E" Glass, "B" Stage Epoxy-Resin-Impregnated, 7781 Style Fabric, Flame Resistant
SAE AMS3821A Cloth, Type "E" Glass, "B" Stage Epoxy-Resin-Impregnated, 7781 Style Fabric, Flame Resistant
SAE AMS3143A-2003 Powder Coating Materials, Epoxy
SAE AMS3867B-2001 Boron Filament Tape, Epoxy-Resin-Impregnated
SAE AMS3821C Cloth, Type "E" Glass, "B" Stage Epoxy-Resin-Impregnated 7781 Style Fabric, Flame Resistant
SAE AMS3821A-1984 CLOTH, TYPE "E" GLASS, "B" STAGE EPOXY-RESIN-IMPREGNATED 7781 Style Fabric, Flame Resistant
SAE AMS3867C-2016 Boron Filament Tape@ Epoxy-Resin-Impregnated
SAE AMS3821B-1995 CLOTH, TYPE "E" GLASS, "B" STAGE EPOXY-RESIN-IMPREGNATED 7781 Style Fabric, Flame Resistant
SAE AMS3821B Cloth, Type "E" Glass, "B" Stage Epoxy-Resin-Impregnated, 7781 Style Fabric, Flame Resistant
SAE AMS3867-1978 BORON FILAMENT TAPE Epoxy Resin Impregnated
SAE AMS3867B-1991 Boron Filament Tape, Epoxy-Resin-Impregnated
SAE AMS3867A-1984 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED
SAE AMS3599B Plastic Sheet, Copper Faced, Glass Fabric Reinforced Epoxy Resin, Flammability Controlled
SAE AMS3599A Plastic Sheet, Copper-Faced, Glass Fabric Reinforced Epoxy Resin, Flammability Controlled
SAE AMS3699-2011 RESIN SYSTEM, EPOXY, CARBON MICROBALLOON FILLED 135°C (275°F) Cure
SAE AMS3731/3B Potting Compound, Epoxy, Bisphenol A-Type, Filled, Heat Cure, Machinable
SAE AMS3731/3A Potting Compound, Epoxy, Bisphenol A-Type, Filled, Heat Cure, Machinable
SAE AMS3727-1988 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3727A-1993 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3699A-2022 Resin System, Epoxy, Carbon Microballoon Filled, 135 °C (275 °F) Cure
SAE AMS3727B-1995 RESIN@ EPOXY@ MATRIX@ THERMOSETTING MODERATE TEMPERATURE RESISTANT@ UNFILLED
SAE AMS3727B Resin, Epoxy, Matrix, Thermosetting, Moderate Temperature Resistant, Unfilled
SAE AMS3699 Resin System, Epoxy, Carbon Microballoon Filled, 135°C (275°F) Cure
SAE AMS3731/3C Potting Compound, Epoxy Bisphenol A-Type Filled, Heat Cure, Machinable
SAE AMS3731/3 Potting Compound, Epoxy, Bisphenol A-Type, Filled, Heat Cure, Machinable
SAE AMS3599 Plastic Sheet, Copper-Faced, Glass Fabric Reinforced Epoxy Resin, Flammability Controlled
SAE AMS3690B-2000 Adhesive Compound, Epoxy Room Temperature Curing
SAE AMS3692A-1986 ADHESIVE COMPOUND, EPOXY High Temperature Application
SAE AMS3690 Adhesive Compound, Epoxy, Room Temperature Curing
SAE AMS3692C Adhesive Compound, Epoxy Resin, High Temperature Application
SAE AMS3699A Resin System, Epoxy, Carbon Microballoon Filled, 135 °C (275 °F) Cure
SAE AMS3692A Adhesive Compound, Epoxy Resin, High Temperature Application
SAE AMS3692-1960 ADHESIVE COMPOUND, EPOXY High Temperature Application
SAE AMS3690-1960 ADHESIVE COMPOUND, EPOXY Room Temperature Curing
SAE AMS3894 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated
SAE AMS3894C Carbon Fiber Tape and Sheet, Epoxy Resin Impregnated
SAE AMS3894F Carbon Fiber Tape and Sheet Epoxy Resin Impregnated
SAE AMS3690A Adhesive Compound, Epoxy, Room Temperature Curing
SAE AMS3692B-1993 ADHESIVE COMPOUND, EPOXY High Temperature Application
SAE AMS3691C-1995 ADHESIVE COMPOUND@ EPOXY MEDIUM TEMPERATURE APPLICATION
SAE AMS3692 Adhesive Compound, Epoxy Resin, High Temperature Application
SAE AMS3690C Adhesive Compound, Epoxy, Room Temperature Curing
SAE AMS3690D Adhesive Compound, Epoxy Room Temperature Curing
SAE AMS3894B Carbon Fiber Tape and Sheet, Epoxy Resin Impregnated
SAE AMS3894D Carbon Fiber Tape and Sheet, Epoxy Resin Impregnated
SAE AMS3692C-2022 Adhesive Compound, Epoxy Resin High Temperature Application
SAE AMS3690B Adhesive Compound, Epoxy, Room Temperature Curing
SAE AMS3894A Carbon Fiber Tape and Sheet, Epoxy Resin Impregnated
SAE AMS3681C-2005 Adhesive, Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3894E Carbon Fiber Tape and Sheet, Epoxy Resin Impregnated
SAE AMS3692B Adhesive Compound, Epoxy Resin, High Temperature Application
SAE AMS3750A-1982 POTTING COMPOUND@ EPOXY@ FLEXIBLE DUROMETER 75-85
SAE AMS3681D-2016 Adhesive@ Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3681 Adhesive, Electrically Conductive, Silver-Filled Epoxy Resin
SAE AMS3681F-2019 Adhesive@ Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3832B-1989 ROVING, TYPE "S" GLASS Epoxy Resin Impregnated
SAE AMS3681D Adhesive, Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3681F Adhesive, Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3894E-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated
SAE AMS3681E Adhesive, Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3681C Adhesive, Electrically Conductive, Silver-Filled Epoxy Resin
SAE AMS3750-1959 POTTING COMPOUND@ EPOXY@ FLEXIBLE DUROMETER 75-85
SAE AMS3894F-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated
SAE AMS3681E-2017 Adhesive@ Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3681C-1995 Adhesive, Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3681A Adhesive, Electrically Conductive, Silver-Filled Epoxy Resin
SAE AMS3681B Adhesive, Electrically Conductive, Silver-Filled Epoxy Resin
SAE AMS3867/2-1978 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B5.6 - E375
SAE AMS3692C-1995 Adhesive Compound, Epoxy Resin High Temperature Application
SAE AMS3731A Potting Compound, Epoxy, Bisphenol A-Type
SAE AMS3832C Roving, Type "S-2" Glass, Epoxy Resin Impregnated
SAE AMS3832D Roving, Type "S-2" Glass Epoxy Resin Impregnated
SAE AMS3750-1994 POTTING COMPOUND, EPOXY, FLEXIBLE Durometer 75 - 85
SAE ARP1610-1981 PHYSIO-CHEMICAL CHARACTERIZATION TECHNIQUES, EPOXY ADHESIVE AND PREPREG RESIN SYSTEMS

American Society for Testing and Materials (ASTM)

ASTM F602-98a Standard Criteria for Implantable Thermoset Epoxy Plastics
ASTM D4142-89(2001) Standard Guide for Testing Epoxy Resins
ASTM D4142-89(1996)e1 Standard Guide for Testing Epoxy Resins
ASTM F641-98a Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM D1763-00(2021) Standard Specification for Epoxy Resins
ASTM D1763-94 Standard Specification for Epoxy Resins
ASTM D1763-00(2005) Standard Specification for Epoxy Resins
ASTM D1763-00(2013) Standard Specification for Epoxy Resins
ASTM D1763-00 Standard Specification for Epoxy Resins
ASTM D1652-11(2019) Standard Test Method for Epoxy Content of Epoxy Resins
ASTM D1652-97 Standard Test Methods for Epoxy Content of Epoxy Resins
ASTM D1652-11 Standard Test Method for Epoxy Content of Epoxy Resins
ASTM D4142-89(2017) Standard Guide for Testing Epoxy Resins
ASTM D1652-04 Standard Test Method for Epoxy Content of Epoxy Resins
ASTM D1652-11e1 Standard Test Method for Epoxy Content of Epoxy Resins
ASTM D4142-89(2009) Standard Guide for Testing Epoxy Resins
ASTM D4142-89(2022) Standard Guide for Testing Epoxy Resins
ASTM F641-98a(2003) Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM F641-09 Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM D1726-90(1996) Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
ASTM D1726-11(2019) Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
ASTM F641-09(2014) Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM D3531/D3531M-24 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TA-720 SECTION 2 Epoxy Resin Systems
IPC TM-650 5.9-1973 Refractive Index Table for Epoxy Resins
IPC TM-650 5.1.416-1975 Analysis of Epoxy Resins for Viscosity
IPC TM-650 5.7.2-1973 Incoming Acceptance Testing of Epoxy Resins

US-FCR

FCR FED H-08-1 SEC 09704-2002 EPOXY RESINOUS FLOORING
FCR VA 09 67 23.30-2011 RESIN (EPOXY RESIN COMPOSITION) MORTAR FLOORING (RES-3)
FCR VA 09 67 23.20-2011 RESINOUS (EPOXY BASE) WITH VINYL CHIP BROADCAST (RES-2)
FCR VA 09 67 23.50-2010 RESINOUS (EPOXY TERRAZZO) FLOORING (RES-5)

Japanese Industrial Standards Committee (JISC)

JIS K 5551:2002 Epoxy resin paint
JIS K 5551:1991 Epoxy resin paint
JIS K 5664:2002 Tar epoxy resin paint
JIS K 7238:1991 Designation of epoxide resins
JIS K 7236:2001 Determination of epoxy equivalent in epoxy resins
JIS K 7236:1995 Testing methods for epoxy equivalent of epoxide resins
JIS K 5664:1995 Tar epoxy resin paint
JIS K 5555:1991 Epoxy resin micaceous iron oxide paint
JIS K 5551 ERRATUM 1:2002 Epoxy resin paint (Erratum 1)
JIS K 5555:2002 Epoxy resin Micaceous Iron Oxide paint
JIS K 7243:1996 Determination of inorganic chlorine in epoxide resins
JIS K 7148-1:2015 Plastics -- Epoxy resins -- Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
JIS K 7147:2008 Plastics -- Epoxy resins -- Test methods
JIS K 7236 AMD 1:2009 Determination of epoxy equivalent in epoxy resins(Amendment 1)
JIS K 6757:2005 Plastics -- Epoxy resins -- Determination of electric conductivity of resin aqueous extracts
JIS K 7246:2000 Plastics -- Epoxy resins and related materials -- Determination of total saponifiable chlorine
JIS K 7148-1:2022 Plastics -- Epoxy resins -- Part 1: Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
JIS C 3851:1994 3.3 kV - 33 kV epoxy-resin post insulators for indoor use
JIS A 6024:1992 Epoxy injection adhesives for repairing in buildings
JIS K 7234:1986 Testing methods for softening point of epoxide resins

General Motors Corporation (GM)

GM 9985865-1993 Adhesive, One-Part, Epoxy, Structural, Expandable, Weldable
GM 9985985-1994 Adhesive, Two-Part, Epoxy, Resin
GM 9986062-1995 Epoxy, Two-Part, Room Temperature Cure, Resin
GM 9985602-1994 Adhesive, Two-Part, Epoxy, Resin Revision C
GM 9982117-1993 Adhesive, Two-Part, Epoxy, Resin Revision A [Replaced: GMNA 9985481]
GM 9986091-1998 Adhesive, Two-Part, Epoxy Resin Revision A

PL-PKN

PN BN 6370-01-1964 Epoxy resin. Epoxy number mark
PN BN 6041-13-1966 Epoxy resin dye. Inspection Method
PN C89085-02-1989 Epoxy resins Methode óf testing Sampling
PN C89085-24-1988 Epoxy resins Methóds of testing Determination of properties of cured resins
PN C89085-13-1987 Epoxy resins Methods of testing Determination of number epoxide and of epoxide equivalent
PN C89085-1974 Epoxy resins uncured Methods of testing

Military Standards (MIL-STD)

MIL MIL-R-47025A-1991 RESIN, CASTING, FIRE RETARDANT, EPOXY BASE (SUPERSEDING MIL-R-47025)
MIL MIL-R-82664-1977 RESIN, EPOXY, LOWVISCOSITY
MIL MIL-R-82657-1977 RESIN, EPOXY, TRIFUNCTIONAL
MIL MIL-R-22628-1964 RESIN, CASTING, EPOXY, ALUMINUM FILLED (NO S/S DOCUMENT)
MIL MIL-PRF-23377K-2012 Primer Coatings: Epoxy, High-Solids
MIL MIL-PRF-47257F-2010 Compound, Epoxy, Filament Winding
MIL MIL-PRF-4556F-1998 COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (SUPERSEDING MIL-C-4556E)
MIL MIL-M-46069-1964 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
MIL MIL-R-47004-1974 RESIN, EPOXY BASE, THIXOTROPIC (NO S/S DOCUMENT)

Korean Agency for Technology and Standards (KATS)

KS M 5307-2004 TAR EPOXY RESIN PAINTS
KS M 3828-2019 Determination of epoxy equivalent in epoxy resins
KS M 3828-2004(2019) Determination of epoxy equivalent in epoxy resins
KS M 5307-2002 TAR EPOXY RESIN PAINTS
KS M 5307-1986 TAR EPOXY RESIN PAINTS
KS M 3828-2004 Determination of epoxy equivalent in epoxy resins
KS D 3629-1995 Fusion bonded epoxy coated reinforcing steel bars
KS F 4923-2005 Epoxy adhesives for repairing in concrete structure
KS M 3823-2023 Testing methods for softening point of epoxide resins
KS M 3823-2008(2018) Testing methods for softening point of epoxide resins
KS M ISO 3673-1-2007(2017) Plastics － Epoxy resins － Part 1: Designation
KS M ISO 3673-1-2022 Plastics — Epoxy resins — Part 1: Designation
KS M 3823-2008 Testing methods for softening point of epoxide resins
KS M 5559-1984 Test methods for epoxide contents in epoxide RESIN for paint
KS M ISO 3673-1:2022 Plastics — Epoxy resins — Part 1: Designation
KS M 3823-2008(2023) Testing methods for softening point of epoxide resins
KS M 3822-2008 Testing methods for viscosity of epoxide resins and hardners
KS M 3822-2008(2018) Testing methods for viscosity of epoxide resins and hardners
KS M 3822-1987 Testing methods for viscosity of epoxide resins and hardners

Bureau of Indian Standards

IS 14925-2001 Epoxy Resin for Paints

CZ-CSN

CSN ON 34 9004-1963 Epoxy cable set
CSN 64 0341-1990 Plastics. Termosetting casting resins. etermination of temperature increa- e of epoxy resins during curing
CSN 64 0334-1990 Plastius. Detemiinationof ester equivalent / epoxy resins
CSN 64 1311-1992 Plastics. Epoxy resins. Determination of easily saponifiable chlorine.
CSN 34 9060-1969 Epoxy-resin insulated indoor sealing end KSe
CSN 64 0338 ZZ1-2000 Epoxy resin. Test Methods. quality score

Ente Nazionale Italiano di Unificazione

UNI 8701-9:1986 Epoxide resins. Test methods. Determination of tendency to crystallize of liquid epoxide resins.
UNI 8701-13:1985 Epoxide resins. Test methods. Determination of saponifiable chlorine.
UNI 8701-5:1986 Epoxide resins. Test methods. Determination of dry solid content of epoxide resins solutions.
UNI 8701-10:1986 Epoxide resins. Test methods. Determination of epoxide equivalent.
UNI EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
UNI EN 10289:2003 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
UNI 8701-14:1986 Epoxide resins. Test methods. Determination of amine number of hardeners for epoxide resins.

GM North America

GM 9985180-1983 Sealer Epoxy
GM GM3635M-1989 Epoxy Filled Spacer Block
GM 9981347-1993 Adhesive, One-Part, Epoxy
GM 9985165-1973 Sealer - Epoxy Replaced by 9981347
GM 9985560-1993 Adhesive, Induction Cure, Epoxy
GM GM6114M-1996 Impact Resistance Coating, Modified Epoxy Type
GM 9985525-1997 Enamel, Engine, Two Component, Epoxy (Black)

RO-ASRO

STAS 12841-1990 Plastics EPOXY RESINS Epoxy equivalent determination
STAS 8512/1-1979 TYPE 040 AND 040 T EPOXIDE RESINS

British Standards Institution (BSI)

BS EN ISO 3673-2:2012 Plastics. Epoxy resins. Preparation of test specimens and determination of properties of crosslinked epoxy resins
BS ISO 21318:2007 Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts
BS ISO 14322:2018 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
BS ISO 18280:2005 Plastics. Epoxy resins. Test methods
BS ISO 18280:2010 Plastics. Epoxy resins. Test methods
BS ISO 18280:2009 Plastics. Epoxy resins. Test methods
BS EN 60249-2-3:1994 Specifications - Metal-clad base materials for printed wiring boards - Copper-clad base material - Specification for epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) - Specification No. 3: Epoxide cellulo
BS ISO 14322:2012 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
BS EN ISO 3673-1:1997 Plastics. Epoxy resins. Designation
BS EN ISO 3673-1:2000 Plastics - Epoxy resins - Designation
05/30126736 DC ISO 21318. Plastics. Epoxy resins. Determination of electrical conductivity of aqueous resin extracts
11/30211364 DC BS ISO 14322. Plastics. Epoxy resins. Determination of degree of cure of cured epoxy resins by differential scanning calorimetry
BS ISO 20368:2017 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
BS 5664-3.11:1995 Solventless polymerisable resinous compounds used for electrical insulation. Specification for individual materials. Epoxy resin-based coating powders
09/30192396 DC BS ISO 18280. Plastics. Epoxy resins. Test methods

IN-BIS

IS 9197-1979 Specification for epoxy resins, hardeners and epoxy resin compositions for floor coverings
IS 9162-1979 Test methods for epoxy resins, hardeners and epoxy resin compositions for floor coverings
IS 8230-1976 Specification for steel-filled epoxy resin-based adhesives

United States Navy

NAVY MIL-R-82664-1977 RESIN, EPOXY, LOW VISCOSITY
NAVY MIL-R-82657-1977 RESIN, EPOXY, TRIFUNCTIONAL
NAVY MIL-R-82664 NOTICE 1-1999 RESIN, EPOXY, LOW VISCOSITY
NAVY QPL-85582-2013 Primer Coatings: Epoxy, Waterborne
NAVY QPL-85582-QPD-2011 Primer Coatings: Epoxy, Waterborne
NAVY QPL-23377-QPD-2011 Primer Coatings: Epoxy, High-Solids
NAVY QPL-22750-2012 Coating, Epoxy, High-Solids
NAVY QPL-22750-QPD-2010 Coating, Epoxy, High-Solids
NAVY QPL-22750-2011 COATING, EPOXY, HIGH-SOLIDS
NAVY QPL-23377-2012 Primer Coatings: Epoxy, High-Solids
NAVY QPL-22750-2013 Coating, Epoxy, High-Solids
NAVY MIL-PRF-85582 E-2012 PRIMER COATINGS: EPOXY, WATERBORNE
NAVY QPL-16923-58 NOTICE 3-2008 Insulating Compound, Electrical, Embedding, Epoxy
NAVY QPL-MMM-A-134-11 NOTICE 2 -QPD-2010 ADHESIVES, EPOXY RESIN, METAL STRUCTURAL BONDING
NAVY QPL-MMM-A-134-11 NOTICE 2-2010 ADHESIVES, EPOXY RESIN, METAL STRUCTURAL BONDING
NAVY QPL-MMM-A-134-11 NOTICE 2-2009 ADHESIVES, EPOXY RESIN, METAL STRUCTURAL BONDING

GM Holden Ltd

HOLDEN HN 1464-2001 Epoxy Resin - Rapid Cure
HOLDEN HN 2289-2013 Foam - Structural Epoxy, Expanding
HOLDEN HN 2186-2014 ADHESIVE - EPOXY - TWO PART
HOLDEN HN 2186-1995 Adhesive - Epoxy - Two Part
HOLDEN HN 2289-2002 Foam - Structural Epoxy, Expanding
HOLDEN HN 2186-2000 Adhesive - Epoxy - Two Part

IPC - Association Connecting Electronics Industries

IPC 7721 3.3.1-1998 Hole Repair@ Epoxy Method
IPC TM-650 5.1.410-1975 Analysis of Epoxy Resin for Activity
IPC TM-650 5.1.414-1975 Analysis of Epoxy Resins for Specific Gravity
IPC 7721 4.5.1-1998 Land Repair@ Epoxy Method
IPC 7721 3.4.1-1998 Key and Slot Repair@ Epoxy Method
IPC 7721 3.5.1-1998 Base Material Repair@ Epoxy Method
IPC 7721 2.6-1998 Epoxy Mixing and Handling
IPC 7711 7.1.1-1998 Epoxy Mixing and Handling
IPC TM-650 5.1.418-1975 Analysis of Epoxy Resins for Volatile Content
IPC 7721 4.4.1-1998 Lifted Land Repair@ Epoxy Method
IPC 7721 4.6.1-1998 Edge Contact Repair@ Epoxy Method
IPC TM-650 5.1.412-1975 Analysis of Epoxy Resin for Solids Content
IPC 7721 4.2.1-1998 Conductor Repair@ Foil Jumper@ Epoxy Method

European Committee for Standardization (CEN)

EN ISO 4895:2014 Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
EN ISO 4895:1999 Plastics - Liquid Epoxy Resins - Determination of Tendency to Crystallize
EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings

Association Francaise de Normalisation

NF T51-520:1978 EPOXY RESINS. DESIGNATION.
NF T51-520-2*NF EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2 : preparation of test specimens and determination of properties of crosslinked epoxy resins.
NF EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
NF EN 10289:2002 Steel pipes and fittings for buried and submerged pipelines - External coatings in epoxy or modified epoxy resin applied in the liquid state
NF T51-522*NF EN ISO 3001:1999 Plastics. Epoxy compounds. Determination of epoxy equivalent.
NF EN ISO 4615:1999 Plastics - Unsaturated and epoxy polyester resins - Determination of total chlorine content
NF EN ISO 3673-1:1999 Plastics - Epoxy resins - Part 1: Designation
NF A49-708-1*NF EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
NF T51-524:1998 Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine.

US-VA

VA 09 67 23.30-2011 RESIN (EPOXY RESIN COMPOSITION) MORTAR FLOORING (RES-3)

International Organization for Standardization (ISO)

ISO 4895:1987 Plastics; Liquid epoxide resins; Determination of tendency to crystallize
ISO 14656:1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
ISO 21318:2007 Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts
ISO 18280:2005 Plastics - Epoxy resins - Test methods
ISO 18280:2010 Plastics - Epoxy resins - Test methods
ISO 14322:2012 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
ISO 20368:2017 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
ISO 14322:2018 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
ISO 11376:1997 Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine
ISO 3673-1:1996 Plastics - Epoxy resins - Part 1 : Designation
ISO 14654:1999 Epoxy-coated steel for the reinforcement of concrete

Gosstandart of Russia

GOST R 50492-1993 Plastics. Liquid epoxide resins. Determination of tendency to cristallize
GOST R 57687-2017 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
GOST R 56211-2014 Uncured epoxy resins. Specification
GOST 22457-1990 Epoxy resins. Method for determination of mass percentage of chlorine
GOST R 57729-2017 Epoxide resins. Determination of 1,2-glycols content
GOST 10587-1984 Uncured epoxy resins. Specifications

Magyar Szabványügyi Testület

MSZ 21133-1963 Urea-formaldehyde resin flammable glaze

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 14322:2016 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
BH GSO ISO 18280:2016 Plastics -- Epoxy resins -- Test methods

Canadian General Standards Board （CGSB)

CAN/CGSB-1.183-1992 Epoxy resin coating, rich in zinc
CAN/CGSB 1.183-1999 Epoxy resin coating, rich in zinc
CAN/CGSB-1.184-1998 Coal tar-epoxy resin coating
CAN/CGSB 1.207-1998 Revetement aux resines epoxydiques durcissant a basse temperature
CAN/CGSB 1.215-1996 Primer for blocks with epoxy resins in two components
CAN/CGSB-1.215-1996 Two-part epoxy resin block primer
CAN/CGSB 1.184-1998 Revetement a base de goudron de houille-resines epoxydiques
CAN/CGSB 1.193-1999 Revetement aux resines epoxydiques, a pouvoir garnissant eleve, marin
CAN/CGSB-1.146-1999 Epoxy resin coating, cold hardening, glossy

GCC Standardization Organization

BH GSO ISO 21318:2024 Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts
GSO ISO 18280:2014 Plastics -- Epoxy resins -- Test methods
GSO ISO 14322:2013 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
GSO ISO 21318:2009 Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 18280:2014 Plastics -- Epoxy resins -- Test methods
OS GSO ISO 21318:2009 Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts

Standards Norway

NS 5411-1995 Paint - Two-pack epoxy mastic
NS-EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)

Danish Standards Foundation

DS/EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
DANSK DS/EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
DANSK DS/EN ISO 3673-1:1999 Plastics - Epoxy resins - Part 1: Designation
DS/EN ISO 3673-1:1999 Plastics - Epoxy resins - Part 1: Designation

German Institute for Standardization

DIN EN ISO 3673-2:2012-10 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012); German version EN ISO 3673-2:2012
DIN EN ISO 3673-1:1999-10 Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996); German version EN ISO 3673-1:1999
DIN EN ISO 3673-1:1999 Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996); German version EN ISO 3673-1:1999
DIN 16912:1967 Plastic Epoxy Molding Material Types

Association of German Mechanical Engineers

VDI 2007-1966 Use of epoxy casting resins with their curing components in the manufacture of production equipment

Swedish Institute for Standards

SS-ISO 14322:2012 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (ISO 14322:2012, IDT)
SS-EN 61249-2-39:2013 Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-c...

YU-JUS

JUS G.S1.813-1991 Plastics.Epoxide resins and qlicidyl esters.Determination of inorqanic chlorine
JUS G.S1.831-1991 Plastics.Polyester and epoxy casting resins.Determination of total volume skrinkage

Thai Industrial Standards Institute (TISI)

TIS 691-1987(en) THAI INDUSTRIIAL STANDARD FOR EPOXY PAINT

Spanish Association for Standardization (UNE)

UNE-EN ISO 3673-2:2013 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
AENOR UNE-EN ISO 3673-2:2013 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)

AASHTO - American Association of State Highway and Transportation Officials

M 235M/M 235-2013 Standard Specification for Epoxy Resin Adhesives
M 235M/M 235-2003 Standard Specification for Epoxy Resin Adhesives

The American Road & Transportation Builders Association

AASHTO M 235M/M 235-2003 Standard Specification for Epoxy Resin Adhesives
AASHTO M 235M/M 235-2013 Standard Specification for Epoxy Resin Adhesives
AASHTO M 235M/M 235-2003 Standard Specification for Epoxy Resin Adhesives
AASHTO M 235M/M 235-2013(R2018) Standard Specification for Epoxy Resin Adhesives

CO-ICONTEC

ICONTEC 3230-1991 Electronics. Test standards for epoxy resin

BELST

STB 1466-2004 Compositions protective modified epoxy. Specifications

Lithuanian Standards Office

LST EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)