Transient Fluorescence Test

Transient Fluorescence Test, Total:100 items.

The international standard classification for "Transient Fluorescence Test" includes: Electronic display devices , Animal husbandry and breeding , Measurement of electrical and magnetic quantities , Other non-ferrous metals and their alloys .

The Chinese standard classification for "Transient Fluorescence Test" includes: Computer peripherals , Domesticate animal , Special electronic technology material , Animal quarantine, veterinary and epidemic prevention , Rare metals and their alloys analysis method .

National Metrological Technical Specifications of the People's Republic of China

JJF 1330-2011 Calibration Specification for Instantaneous Effective Intensity Testers
JJF 1329-2011 Calibration Specification for Instantaneous Spectral Instruments

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38621-2020 Transient thermal test method for light emitting diode modules

Group Standards of the People's Republic of China

T/CSAE 272-2022 General test method for transient longitudinal slip property of tyres
T/BEA 40003-2023 Calibration Specification of Transient Resistance Test Equipment
T/CSAE 273-2022 General test method for transient state combined slip property of tyres
T/CAMS /CICEIA168-2023 test method of transient response ability for turbocharger
T/CSAE 271-2022 General test method for transient lateral slip property of tyres

Professional Standard - Aviation

HB 5400-1988 Rubber thermal conductivity test method transient hot wire method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14926.52-2001 Laboratory animal - Immunofluorescence assay(IFA)
GB/T 6833.4-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Power line transient susceptibility test
GB/T 4070-1996 General method of the phosphor
GB/T 31969-2015 Test methods of rare earth three-band phosphors for fluorescent lamps―Measurement of phosphors application character
GB/T 17999.9-1999 SPF chicken--Indirect immunofluorescent assay

未注明发布机构

DIN EN 61290-4-1 E:2015-06 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
ASTM RR-D02-1506 2001 D6667-Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM RR-D02-1784 2014 D6667-Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
DIN EN 61290-4-3 E:2017-11 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
DIN EN 61290-4-3 E:2013-12 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control

Professional Standard - Electron

SJ/Z 610-1973 Test methods for field-excited phosphor

Professional Standard - Electricity

DL/T 2120-2020 Immunity test for transient electromagnetic disturbance due to switch operation in GIS substation

Professional Standard - Agriculture

17 OIE陆生动物诊断试验和疫苗手册-2005 Rabies item I: fluorescent antibody test (FAT)

British Standards Institution (BSI)

BS EN 61290-4-2:2011 Optical amplifiers. Test methods. Gain transient parameters. Broadband source method
BS EN 61290-4-1:2016 Optical amplifiers. Test methods. Gain transient parameters. Two-wavelength method
BS EN 61290-4-1:2011 Optical amplifiers. Test methods. Gain transient parameters. Two-wavelength method
BS ISO 7401:2011 Road vehicles. Lateral transient response test methods. Open-loop test methods
BS EN IEC 61290-4-4:2018 Optical amplifiers. Test methods - Gain transient parameters. Single channel optical amplifiers with gain control
BS ISO 22140:2021 Passenger cars. Validation of vehicle dynamics simulation. Lateral transient response test methods
BS EN IEC 61290-4-3:2018 Optical amplifiers. Test methods - Power transient parameters. Single channel optical amplifiers in output power control

Korean Agency for Technology and Standards (KATS)

KS C 7608-1986 Momentary starting-up hot cathodes fluorescent lamps
KS R 3959-2023 Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
KS R 3959-2018 Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
KS R ISO 7401-2019 Road vehicles — Lateral transient response test methods — Open-loop test methods
KS R ISO 7401:2014 Road vehicles — Lateral transient response test methods — Open-loop test methods
KS R ISO 7401:2008 Road vehicles-Lateral transient response test methods-Open-loop test methods
KS K 0458-1996(2001) TESTING METHOD FOR COLOR FASTNESS TO LIGHT OF FLUORESCENT WHITENED TEXTILES
KS M 8430-2012 Uranine
KS R ISO 8725:2008 Road vehicles－Transient open-loop response test method with one period of sinusoidal input
KS R ISO 8725-2008(2013) Road vehicles－Transient open-loop response test method with one period of sinusoidal input
KS R ISO 8726-2008(2013) Road vehicles－Transient open-loop response test method with pseudo-random steering input
KS C 0265-1995(2000) ELECTROMAGNETIC COMPATIBILRTY-TESTING AND MEASUREMENT TECHNIQUES-ELECTRICAL FAST TRAMSTENT/BURST IMMUNITY TEST
KS R ISO 14793-2015(2020) Road vehicles－Heavy commercial vehicles and buses－Lateral transient response test methods

SCC

ESD SP5.4-2008 Transient Latch-up Testing - Component Leve Supply Transient Stimulation
BS ISO 7401:2003 Road vehicles. Lateral transient response test methods. Open-loop test methods
10/30202463 DC BS ISO 7401. Road vehicles. Lateral transient response test methods. Open-loop test methods
DANSK DS/EN 61290-4-1:2017 Optical amplifiers – Test methods – Part 4-1: Gain transient parameters – Two-wavelength method
CEI EN 61290-4-1:2017 Optical amplifiers - Test methods Part 4-1: Gain transient parameters - Two-wavelength method
CEI EN 61290-4-2:2012 Optical amplifiers - Test methods Part 4-2: Gain transient parameters - Broadband source method
DANSK DS/EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method

SE-SIS

SIS SS-ISO 7401:1989 Road vehicles — Lateral transient response test methods

Association Francaise de Normalisation

NF C93-805-4-2*NF EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2 : gain transient parameters - Broadband source method
NF C93-805-4-1:2011 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method.
NF R10-031*NF ISO 7401:2004 Road vehicles - Lateral transient response test methods - Open-loop test methods
NF EN 61290-4-1:2017 Optical amplifiers - Test methods - Part 4-1: transient gain parameters - Two-wavelength method
NF C93-805-4-1*NF EN 61290-4-1:2017 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method
NF EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: transient gain parameters - Broadband source method

KR-KS

KS R ISO 22140-2023 Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
KS R 3959-2018(2023) Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods

European Committee for Electrotechnical Standardization（CENELEC）

EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method

GSO

GSO ISO 7401:2013 Road vehicles -- Lateral transient response test methods -- Open-loop test methods
BH GSO ISO 7401:2016 Road vehicles -- Lateral transient response test methods -- Open-loop test methods
OS GSO IEC 61290-4-1:2014 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
OS GSO IEC 61290-4-2:2014 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method

International Organization for Standardization (ISO)

ISO 7401:2003 Road vehicles - Lateral transient response tests methods - Open-loop test methods
ISO 7401:2011 Road vehicles - Lateral transient response test methods - Open-loop test methods
ISO 22140:2021 Passenger cars - Validation of vehicle dynamics simulation - Lateral transient response test methods

Electronic Components, Assemblies and Materials Association

ECA TEP105-16-A-2000 Test Method for Phosphor Linearity

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO Z110-1991 Transient Response Test Procedures for Passenger Cars

ESD - ESD ASSOCIATION

SP5.4-2004 Latch-Up Sensitivity Testing of CMOS/BiCMOS Integrated Circuits Transient Latch-up Testing – Component Level Supply Transient Stimulation
TR5.4-04-2013 Electrostatic Discharge Sensitivity Testing Transient Latch-up Testing
TR5.4-03-2011 Electrostatic Discharge Sensitivity Testing Latch-Up Sensitivity Testing of CMOS/BiCMOS Integrated Circuits Transient Latch-up Testing – Component Level Supply Transient Stimulation

International Electrotechnical Commission (IEC)

IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
IEC 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
IEC 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
IEC 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method

American Society for Testing and Materials (ASTM)

ASTM F1262M-95 Standard Guide for Transient Radiation Upset Threshold of Digital Integrated Circuits
ASTM F1262M-95(2002) Standard Guide for Transient Radiation Upset Threshold of Digital Integrated Circuits
ASTM E2073-02 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ASTM F978-90(1996)e1 Standard Test Method for Characterizing Semiconductor Deep Levels by Transient Capacitance Techniques
ASTM E2073-07 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings

Japanese Industrial Standards Committee (JISC)

JIS C 6122-4-3:2018 Optical amplifiers -- Test methods -- Part 4-3: Power transient parameters -- Single channel optical amplifiers in output power control
JIS C 6122-4-1:2013 Optical amplifiers.Test methods.Part 4-1: Transient parameters.Measurement of gain parameters using two-wavelength method
JIS C 6122-4-2:2013 Optical amplifiers -- Test methods -- Part 4-2: Transient parameters -- Measurement of gain parameters using broadband source method
JIS L 0887:1975 Testing method for colour fastness to light fluorescent whitening agents and fluorescent whitened textiles

Danish Standards Foundation

DS/EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
DS/EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method

NEMA - National Electrical Manufacturers Association

NEMA C78.3-1978 DIMENSIONAL AND ELECTRICAL CHARACTERISTICS OF FLUORESCENT LAMPS - INSTANT-START AND COLD-CATHODE TYPES

American National Standards Institute （ANSI)

ANSI/ASTM E2073:2010 Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
NEMA LSD 2-2012(S2020) Wiring Requirements for T8 and Twin T5 Fluorescent Lamps with Instant-Start Ballasts

GM North America

GM GM9115P-1993 Conducted Transient Emissions EMC - Component Test Procedure

German Institute for Standardization

DIN EN 61290-4-1:2017-06 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2016); German version EN 61290-4-1:2016 / Note: DIN EN 61290-4-1 (2012-04) remains valid alongside this standard until 2019-10-31.
DIN EN 61290-4-2:2012-04 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (IEC 61290-4-2:2011); German version EN 61290-4-2:2011 / Note: Applies in conjunction with DIN EN 61291-1 (2007-06).

GB-REG

REG NASA-LLIS-0634-1999 Lessons Learned - Transient Start-up Performance of the WIRE Pyro Electronics (1999)
REG NASA-LLIS-2918-2010 Lessons Learned - Start Transient Leak Detection System (STLDS)

ES-UNE

UNE-EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (Endorsed by AENOR in January of 2012.)
UNE-EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (Endorsed by Asociación Española de Normalización in February of 2017.)

Canadian Standards Association (CSA)

CSA TIL B-37-1988 Lighting; Solid State (Electronic) Fluorescent Ballasts; Interim Certification Requirements

Others: transient fluorescence,bioluminescent test,Transient Fluorescence,transient fluorescence,Fluorescence background test,Fluorescence spectroscopy test,Fluorescence test,Transient Fluorescence,Transient fluorescence instrument sample preparation,Fluorescence test,Transient fluorescent latest model,Fluorescence test,Fluorescent and Transient,fluorescence transient,fluorescence transient,Fluorescence test,Transient Fluorescence and Transient Fluorescence,Transient Fluorescence Test,fluorescent antibody test