The use of biochemical analyzer

The use of biochemical analyzer, Total:165 items.

The international standard classification for "The use of biochemical analyzer" includes: Rubber , Optics and optical measurements , Laboratory medicine , Exploratory and extraction equipment .

The Chinese standard classification for "The use of biochemical analyzer" includes: Rubber products in general , Optical instrument in general , Medical laboratory equipment , Chemical Measurement , Petroleum geology exploration .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 14880-1994 Hygienic standard for the use of nutritional fortification substances in foods
GB/T 26328-2010 Optical interference filters for biochemical analyzer
GB/T 25268-2010 Rubber—Guide to the use of curemeters

国家药监局

YY/T 1662-2019 Quality control material for clinical chemistry analyzer

Professional Standard - Medicine

YY/T 1549-2024 Calibrator for biochemical analyzer
YY/T 0654-2008 Automatic chemistry analyzer
YY 0014-1990 Biochemical analyzer
YY/T 0014-2005 Semiautomatic biochemistry analyzer

国家食品药品监督管理局

YY/T 0654-2017 Automatic chemistry analyzer

Professional Standard - Nuclear Industry

EJ/T 520-1990 Bio-chemiluminescence tester

National Metrological Verification Regulations of the People's Republic of China

JJG 464-2011 Semiautomatic Clinical Chemistry Analyzers
JJG 464-1996 Verification Regulation of Ceinical Chemistry Analyzer

Group Standards of the People's Republic of China

T/QGCML 3364-2024 Automated instrument panel production line automated quality inspection system
T/ZZB 1524-2020 Drawing ruler-Ruler for students
T/QGCML 3363-2024 Automated instrument panel production line control system
T/HEBQIA 280-2024 AS series fully automatic biochemical analyzers
T/GDCA 018-2023 General principles of facial mask for radiofrequency appliance

National Metrological Technical Specifications of the People's Republic of China

JJF 2036-2023 Calibration Specification for Dry Biochemistry Analyzers
JJF 1720-2018 Calibration Specification for Automatic Chemistry Analyzers

工业和信息化部

HG/T 5227-2017 Laser gas analyzer for fluid catalytic cracking regeneration flue gas

Professional Standard - Petroleum

SY/T 6249-2005 Operation and maintenance for magnetometer
SY/T 5939-2009 Operation and maintenance for gravimeter
SY/T 5939-2000 Operation and maintenance for gravimeter
SY/T 5930-2010 Operation and Maintenance for Electromagnetic Instruments

GSO

GSO ISO 10260:2013 Water quality -- Measurement of parameters -- Spectrometric determination of the chlorophyll-a concentration
GSO ISO 3417:2015 Rubber -- Measurement of vulcanization characteristics with the oscillating disc curemeter
GSO ISO 17500:2007 Aluminium oxide used for the production of primary aluminium - Determination of attrition index
GSO 290:1994 Instruction manual for appliances ,Instruments and equipment
GSO ISO 8008:2007 Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption
NB/T 11447-2023 Mine life detector
OS GSO 1653:2002 METER RULES AND RULERS FOR SCHOOL USE
GSO ISO 14648-2:2015 Micrographics -- Quality control of COM recorders that generate images using a single internal display system -- Part 2: Method of use

VDI - Verein Deutscher Ingenieure

VDI 6224 Blatt 1-2011 Bionic optimization - Application of evolutionary algorithms

British Standards Institution (BSI)

BS ISO 6502-2:2018 Rubber. Measurement of vulcanization characteristics using curemeters. Oscillating disc curemeter
BS ISO 6502-3:2023 Rubber. Measurement of vulcanization characteristics using curemeters. Rotorless curemeter
BS ISO 6502-3:2018 Rubber. Measurement of vulcanization characteristics using curemeters. Rotorless curemeter
BS ISO 6502-1:2018 Rubber. Measurement of vulcanization characteristics using curemeters. Introduction
24/30486334 DC BS ISO 6502-2 Rubber - Measurement of vulcanization characteristics using curemeters - Part 2: Oscillating disc curemeter
22/30439528 DC BS ISO 6502-3. Rubber. Measurement of vulcanization characteristics using curemeters. Part 3. Rotorless curemeter
BS EN 17351:2020 Bio-based products. Determination of the oxygen content using an elemental analyser
24/30486331 DC BS ISO 6502-1 Rubber - Measurement of vulcanization characteristics using curemeters - Part 1: Introduction
19/30387008 DC BS EN 17351. Bio-based products. Determination of the oxygen content using an elemental analyser
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN 591:2001 Instructions for use for in vitro diagnostic instruments for professional use
BS ISO 19050:2015 Rubber, raw, vulcanized. Determination of metal content by ICP-OES
BS ISO 15319:1999 Recycled pulps — Estimation ofvisible contraries by instrumental means using reflected light

American Society for Testing and Materials (ASTM)

ASTM D1052-09(2019) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM D7825-12 Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer
ASTM D528-97(2007) Standard Test Method for Machine Direction of Paper and Paperboard
ASTM D5289-19a Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D5289-19 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D5289-95(2001) Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters
ASTM D5289-95 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM C490/C490M-10 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490-07 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM RR-E37-1042 2013 E2551-Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM C490/C490M-17 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-09 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM C490/C490M-11 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-11e1 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490-00a Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM E3273-21 Standard Practice to Assess Microbial Decontamination of Indoor Air using an Aerobiology Chamber
ASTM F1930-18 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM RR-D02-1901 2018 D8184-Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids using a Particle Quantifier (PQ) Instrument

SCC

VDI 6224 BLATT 1-2012 Bionic Optimization — Evolutionary Algorithms in Application
BS 903-A60.1:1996 Physical testing of rubber. Curemetering-Guide to the use of curemeters
ISO 6502:1999/DAmd 1 Rubber — Guide to the use of curemeters — Amendment 1: Precision
NS-EN 17351:2020 Bio-based products — Determination of the oxygen content using an elemental analyser
DANSK DS/EN 17351:2020 Bio-based products – Determination of the oxygen content using an elemental analyser
AWWA ACE94245 Instrumentation Used in the Large Meter Selection Process
AENOR UNE-EN 62471-5:2016 Photobiological safety of lamps and devices that use lamps. Part 5: Image projectors.
DIN EN 17351 E:2019 Draft Document - Bio-based products - Determination of the oxygen content using an elemental analyser; German and English version prEN 17351:2019
BS 1673-10:1977 Methods of test for raw rubber and unvulcanized compounded rubber.-Measurement of prevulcanizing and curing characteristics by means of curemeters
CEI 45-3:1997 Piattelli porta sorgenti impiegati nella strumentazione nucleare
AWWA JAW10798 Journal AWWA — Experience With Chlorine Dioxide in Brussels: Generation of Chlorine Dioxide
CEI 76:1998 Guide for the use of laser equipment
BS 6659-2:1986 Producing and assessing changes in surface structure and colour of textile floor coverings-Method for fatiguing using the hexapod tumbler tester
AENOR UNE-EN ISO 20227:2018 Water quality. Determination of the inhibition effects of wastewater, natural water and chemicals on the growth of the duckweed Spirodela polyrhiza. Method using an independent miniaturized biological assay...

Japanese Industrial Standards Committee (JISC)

JIS K 6296-3:2023 Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 3: Rotorless curemeter
JIS K 6296-2:2023 Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 2: Oscillating disc curemeter
JIS K 3602:1990 Apparatus for the estimation of biochemical oxygen demand (BODs) with microbial sensor
JIS K 3602 AMD 1:2006 Apparatus for the estimation of biochemical oxygen demand (BODs) with microbial sensor (Amendment 1)
JIS K 6296-1:2023 Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 1: Introduction
JIS B 8574:2013 LPG dispensers for motor vehicles.Measuring instruments used in transaction or certification

Association Francaise de Normalisation

NF T46-017-2*NF ISO 6502-2:2018 Rubber - Measurement of vulcanization characteristics using curemeters - Part 2 : oscillating disc curemeter
NF T46-017-3*NF ISO 6502-3:2018 Rubber - Measurement of vulcanization characteristics using curemeters - Part 3 : rotorless curemeter
NF X85-011*NF EN 17351:2020 Bio-based products - Determination of the oxygen content using an elemental analyser
NF EN 17351:2020 Bio-based products - Determination of oxygen content using an elemental analyzer
NF EN 62471-5:2015 Sécurité photobiologique des lampes et des appareils utilisant des lampes - Partie 5 : projecteurs d'images
NF ISO 6502-3:2023 Rubber - Measuring vulcanization characteristics using rheometers - Part 3: rotorless rheometer
NF ISO 6502-2:2018 Rubber - Measuring vulcanization characteristics using rheometers - Part 2: oscillating disk rheometer
NF EN 14805:2022 Chemicals used for the treatment of water intended for human consumption - Sodium chloride for electrochemical generation of chlorine using non-membrane technologies
NF ISO 6502-1:2018 Rubber - Measuring vulcanization characteristics using rheometers - Part 1: introduction
NF V03-717-2*NF EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2 : determination of rheological properties using a extensograph
NF E10-022:1991 Measuring instruments. Inspection data sheet.

International Organization for Standardization (ISO)

ISO/DIS 6502-2:2024 Rubber-Measurement of vulcanization characteristics using curemeters-Part 2: Oscillating disc curemeter
ISO/DIS 6502-1:2024 Rubber-Measurement of vulcanization characteristics using curemeters-Part 1: Introduction
ISO 8322-7:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 7: instruments when used for setting out
ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
ISO 14648-2:2001 Micrographics - Quality control of COM recorders that generate images using a single internal display system - Part 2: Method of use

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 1871.1-2014 IEEE Recommended Practice for Using IEEE 1671.2(TM) Instrument Description Templates for Describing Synthetic Instrumentation for Classes of Instruments such as Waveform Generators, Digitizers, External Oscillators, and Up and Down Converters
IEEE P1871.1/D4, April 2014 IEEE Draft Recommended Practice for Using IEEE 1671.2 Instrument Description Templates for Describing Synthetic Instrumentation for Classes of Instruments Such as Waveform Generators, Digitizers, External Oscillators, and Up & Down Converters
IEEE P1871.1/D5, August 2014 IEEE Approved Draft Recommended Practice for Using IEEE 1671.2 Instrument Description Templates for Describing Synthetic Instrumentation for Classes of Instruments Such as Waveform Generators, Digitizers, External Oscillators, and Up & Down Converters

South African Bureau of Standard

SANS 10361:2000 Textile floor coverings - Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers

Spanish Association for Standardization (UNE)

UNE 53629:1989 RUBBER. MEASUREMENT OF VULCANIZATION CHARACTERISTICS WITH THE OSCILLATING DISC CUREMETER
UNE-EN 17351:2021 Bio-based products - Determination of the oxygen content using an elemental analyser
UNE-EN 591:2001 Instructions for use for in vitro diagnostic instruments for professional use.

Korean Agency for Technology and Standards (KATS)

KS A 3009-2021 Glossary of terms used in instrumentation
KS C 1221-1989(2009) Polygraphs for clinical use
KS M 6687-2021 Test method for rubber compound-vulcanizing characteristics using oscillating disk cure meter
KS C 1221-2014 Polygraphs for clinical use
KS A 3010-1986 Glossary of terms used in instrumentation Accuracy and precision
KS C IEC 60476:2009 Nuclear instrumentation－Electrical measuring systems and instruments utilizing ionizing radiation sources－General aspects
KS A 4401-2013 Planchets used in radiation measurement instruments

SAE - SAE International

SAE ARP1894A-1998 Useful Life Determination for Chemical Oxygen Generators
SAE ARP1894-1987 Useful Life Determination Chemical Oxygen Generators

Society of Automotive Engineers (SAE)

SAE ARP1894A-2013 Useful Life Determination for Chemical Oxygen Generators
SAE ARP1894B-2014 Useful Life Determination for Chemical Oxygen Generators

CEN - European Committee for Standardization

PREN 17351-2019 Bio-based products - Determination of the oxygen content using an elemental analyser

German Institute for Standardization

DIN EN 17351:2020-04 Bio-based products - Determination of the oxygen content using an elemental analyser; German version EN 17351:2020
DIN EN 17351:2020 Bio-based products - Determination of the oxygen content using an elemental analyser
DIN EN 17351 E:2019-02 Bio-based products - Determination of the oxygen content using an elemental analyser
DIN 58541:1996 Dividers for school drawing standard drawing instruments

GOST

GOST 34751-2021 Rubber compounds. Determination of vulcanization characteristics using rotorless cure meters

RU-GOST R

GOST 21.404-1985 System of design documents for construction. Industrial process automation. Instrumentation symbols for use in diagrams
GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST R ISO 10238-2015 Carbonaceous materials used in the production of aluminium. Pitch for electrodes. Determination of sulfur content by an instrumental method

Standard Association of Australia （SAA）

AS 2162.2:1998 Verification and use of volumetric apparatus - Guide to the use of piston-operated volumetric apparatus (POVA)
AS 2054:1977 Spirit levels for use in precision engineering

Aeronautical Radio Inc.

ARINC 413A SEC 7.0 Instrumentation Circuits

The American Road & Transportation Builders Association

AASHTO M 352-2023 Materials Used in Cold Recycled Mixtures with Emulsified Asphalt
AASHTO M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO R 70M/R 70-2018 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

European Committee for Standardization (CEN)

EN 591:1994 In Vitro Diagnostic Systems - Requirements for User Manuals for In Vitro Diagnostic Instruments for Professional Use
EN 591:2001 Instructions for Use for In Vitro Diagnostic Instruments for Professional Use

IN-BIS

IS 5953-1985 Specification for Bauxite Used in Alumina Production for the Aluminum Industry
IS 5514-1969 Specifications for the instrument used in the "LE-CHATELIER" test

IX-FAO

CAC/GL 13-1991 Guidelines for the preservation of raw milk by use of the lactoperoxidase system

IT-UNI

UNI 7896-1978 Technical drawings. Simplified marking of sanitary instruments and equipment

AASHTO - American Association of State Highway and Transportation Officials

M 210-2006 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2009 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
R 70M/R 70-2018 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE LV-11-C034-2011 Quantifying Chemical/Biological Event Severity with Vulnerability-Based Performance Metrics

International Electrotechnical Commission (IEC)

IEC TR 61869-103:2012 Instrument transformers - The use of instrument transformers for power quality measurement

SE-SIS

SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments

API - American Petroleum Institute

API 4202-1973 PROGRAM FOR UPGRADING THE NO2 INSTRUMENTATION EMPLOYED IN THE 1972 CHATTANOOGA NO2 EXPOSURE STUDY

Danish Standards Foundation

DS/ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph

VN-TCVN

TCVN 7848-2-2015 Wheat flour - Physical characteristics of doughs .Part 2:Determination of rheological properties using an extensograph

RO-ASRO

STAS SR ISO 8322-7:1995 Building construction - Measuring instruments- Procedures for determining accuracy in use. Part 7: Instruments when use for setting out

HU-MSZT

MSZ 11395/1-1971 Magnetic recording generally uses instruments