Laboratory installation

Laboratory installation, Total:85 items.

The international standard classification for "Laboratory installation" includes: Semi-manufactures of timber .

The Chinese standard classification for "Laboratory installation" includes: Artificial board .

未注明发布机构

DVGW G 621:1989-08 Technical regulations for gas installation in laboratories

Group Standards of the People's Republic of China

T/CAS 652-2022 Guide for selection, installation and use of fume hoods in analytical chemistry laboratories
T/NAHIEM 84-2023 Technical standards for assembled biosafety laboratories
T/QGCML 076-2020 Laboratory safety education and training system

Henan Provincial Standard of the People's Republic of China

DB4117/T 324-2021 Guidelines for Safety Management of Animal Products Testing Laboratories

Professional Standard - Forestry

LY/T 2387-2014 Installation and inspection guidelines for interior wood-based door

Professional Standard - Agriculture

NY/T 1832-2009 Code for acceptance of construction quality of greenhouse steel structure

Ente Nazionale Italiano di Unificazione

UNI EN 14056:2004 Laboratory furniture - Recommendations for design and installation
UNI 6128:1972 Preparing experimental concretes in the laboratory.

Standards Norway

NS-EN 14056:2003 Laboratory furniture — Recommendations for design and installation
SN-CEN/TS 17441:2020 Laboratory installations — Ventilation systems in laboratories

Danish Standards Foundation

DANSK DS/EN 14056:2003 Laboratory furniture - Recommendations for design and installation
DS/EN 14056:2003 Laboratory furniture - Recommendations for design and installation
DANSK DS/CEN/TS 17441:2020 Laboratory installations – Ventilation systems in laboratories

German Institute for Standardization

DIN EN 14056:2003-07 Laboratory furniture - Recommendations for design and installation; German version EN 14056:2003
DIN EN 14056:2003 Laboratory furniture - Recommendations for design and installation; German version EN 14056:2003
DIN 12899-2:1990 Laboratory installations; emergency shower installations; eye showers, safety requirements, tests
DIN 12980:2005 Laboratory furniture - Safety cabinets for handling cytotoxic substances
DIN CEN/TS 17441:2020-07 Laboratory installations - Ventilation systems in laboratories; German version CEN/TS 17441:2020
DIN EN 14056-1:2024 Laboratory furniture - Recommendations for design and installation - Part 1: General; German and English version prEN 14056-1:2024
DIN 52218-2:1986 Acoustics - Laboratory measurements of noise emissions from taps in water supply installations - Installation and operating conditions
DIN EN 14056-1 E:2024-10 Draft Document - Laboratory furniture - Recommendations for design and installation - Part 1: General; German and English version prEN 14056-1:2024
DIN 52218-3:1986 Acoustics - Laboratory testing of noise emissions from equipment in water installations - Part 3: Installation and operating conditions for valves and equipment
DIN 58951:2024 Sterilization - Steam sterilizers for laboratory use - Apparatus requirements, requirements on services and installation
DIN 58951:2024-01 Sterilization - Steam sterilizers for laboratory use - Apparatus requirements, requirements on services and installation / Note: Date of issue 2023-11-24*Intended as replacement for DIN 58951-2 (2018-01).

Lithuanian Standards Office

LST EN 14056-2004 Laboratory furniture - Recommendations for design and installation
LST EN 50174-3-2014 Information technology - Cabling installation -- Part 3: Installation planning and practices outside buildings

British Standards Institution (BSI)

BS 3202-4:1991 Laboratory furniture and fittings-Recommendations for installation
BS EN 14056:2003 Laboratory furniture - Recommendations for design and installation
BS 3202-4:1991(1999) Laboratory furniture and fittings — Part 4 : Recommendations for installation
BS 7258-2:1990 Laboratory fume cupboards-Recommendations for the exchange of information and recommendations for installation
BS 2646-2:2023 Autoclaves for sterilization in laboratories - Planning and installation. Code of practice
BS PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
BS DD 80-2:1982 Laboratory fume cupboards-Recommendations for information to be exchanged between purchaser, vendor and installer and recommendations for installation
BS 2646-2:1990 Autoclaves for sterilization in laboratories - Guide to planning and installation
BS 7258-2:1994(1998) Laboratory fume cupboards — Part 2 : Recommendations for the exchange of information and recommendations for installation
BS 7258-2:1994 Laboratory fume cupboards - Recommendations for the exchange of information and recommendations for installation
24/30497911 DC BS EN 14056-1 Laboratory furniture - Recommendations for design and installation - Part 1: General
BS 6864-4:1987 Laboratory tests on noise emission from appliances and equipment intended for use in water supply installations-Method for mounting and operating special appliances

Association Francaise de Normalisation

NF EN 14056:2003 Laboratory Furniture - Design and Installation Recommendations
XP X15-300*XP CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
XP CEN/TS 17441:2020 Laboratory installations - Laboratory ventilation systems
NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
NF D27-403:1971 LETTERBOXES FOR OUTDOOR INSTALLATION.

Spanish Association for Standardization (UNE)

UNE-EN 14056:2004 Laboratory furniture - Recommendations for design and installation

European Committee for Standardization (CEN)

EN 14056:2003 Laboratory furniture - Recommendations for design and installation
CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0100-723-1990*DIN VDE 0100-723:1990 Erection of power installations with nominal voltages up to 1000 V; Class-rooms with experimental desks
VDE 0100-723 DIN VDE 0100-723-1983*DIN 57100-723:1983 German regulations require that high-voltage devices with a rated voltage not exceeding 1000V be installed in the laboratory
VDE 0100-723-2005 Erection of low-voltage installations - Requirements for special installations or locations - Part 723: Class-rooms with experimental equipment
VDE-Schriftenreihe Band 045:2018 Electrical installation in residential buildings - Handbook for installation practice

Korean Agency for Technology and Standards (KATS)

KS C IEC 61229:2017 Rigid protective covers for live working on a.c. installations
KS C IEC 61229-2017 Rigid protective covers for live working on a.c. installations

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 3018:2001 Electrical installations - Domestic installations
AS/NZS 2243.8:2014 Laboratory safety fume hood
AS/NZS 2243.8:2006 Laboratory Safety Part 8: Fume Hoods

IT-UNI

UNI 7497-1975 Protective coating for laboratory and nuclear installations. Properties and test methods
UNI 7800-1978 Protective coating for laboratory and nuclear installations. Waterproof strength measurement
UNI 7802-1978 Protective coating for laboratory and nuclear installations. Wear resistance measurement
UNI 7803-1978 Protective coating for laboratory and nuclear installations. Impact strength measurement
UNI 7801-1978 Protective coating for laboratory and nuclear installations. Determination of chemical resistance strength
UNI 7804-1978 Protective coating for laboratory and nuclear installations. Anti-ionizing radiation intensity measurement

Military Standards (MIL-STD)

MIL MIL-L-53111-1991 LABORATORY, PETROLEUM, SUPPLEMENTAL, SEMITRAILER MOUNTED (NO S/S DOCUMENT)
MIL MIL-L-51050B-1971 LABORATORY, PETROLEUM, SEMITRAILER MOUNTED (NO S/S DOCUMENT) (SUPERSEDING MIL-L-51050A)
DOD MIL-C-37106-1974 CASE, MEDICAL LABORATORY EQUIPMENT SET

Gosstandart of Russia

GOST 27719-1988 Earth-moving machinery. Fallingobject protective
GOST 29228-1991 Laboratory glassware. Graduated pipettes. Part 2. Pipettes for which no waiting time is specified

NL-NEN

NEN 2673-1972 Code ofpractice for installation ofPE-waste pipes indoors

American Society for Testing and Materials (ASTM)

ASTM E1222-90(2002) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
ASTM E921-97(2003) Standard Specification for Export Packaged Laboratory Apparatus
ASTM E1222-90(1996)e1 Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
ASTM E920-97(2003) Standard Specification for Commercially Packaged Laboratory Apparatus

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE DA-07-032-2007 Laboratory Evaluation of Residential Window Installation Methods on Stucco Wall Assemblies

HU-MSZT

MSZ 1610/5-1970 Safety rules for installation of over 1000 high voltage electrical equipment in electrical and operational laboratories
MNOSZ 6646-1952 Laboratory glass fixtures

Standard Association of Australia （SAA）

AS 2243.1:1990 Safety in laboratories - General
AS 2243.2:1982 Safety in laboratories - Chemical
AS 2243.1:1982 Safety in laboratories - General
AS 2243.8:1992 Safety in laboratories - Fume cupboards
AS 2243.8:1986 Safety in laboratories - Fume cupboards

Standards New Zealand

NZS 7203:1987 Safety in laboratories - Fume cupboards
NZS 7203:1992 Safety in laboratories - Fume cupboards

Underwriters Laboratories (UL)

UL 2106-2015 Field erected boiler assemblies
UL 2106-1994 Field erected boiler assemblies

Swedish Institute for Standards

SS-EN 15154-1:2006 Emergency safety showers - Part 1: Plumbed-in body showers for laboratories

Others: installation conditions,Installation recommended,Instrument installation,pipeline installation,Installation recommended,Pipe installing,instrument installation,recommended installation,iec installation,Nut installation,rfid installation,installation bounce,iec installation,Install resistor,installation method,device installation,laboratory installation,Laboratory installation