Aerobic Test Tool

Aerobic Test Tool, Total:302 items.

The international standard classification for "Aerobic Test Tool" includes: Workplace atmospheres , Occupational safety. Industrial hygiene , Geotextiles , Software development and system documentation , Metalliferous minerals , Head protective equipment , Extraction and processing of petroleum and natural gas , Telecommunication terminal equipment , Small kitchen appliances .

The Chinese standard classification for "Aerobic Test Tool" includes: Labor sanitation , Other textile articles , Software engineering , Manganese ore , Articles for labor protection , Communication equipment in general , Cooking appliances, basic standards and general methods .

Group Standards of the People's Republic of China

T/CASME 56-2022 Kitchen faucet with ozone-killing function
T/EGAG 012.1-2022 Function automation test tools—Part1: Quality test specifications
T/TAF 094-2021 Testing methods of router with SRv6 function
T/EGAG 014-2022 Quality test specification for fault injection test tool
T/CPQS E0011-2021 Testing and evaluation of air conditioners with forest wind function

Occupational Health Standard of the People's Republic of China

GBZ/T 160.58-2004 Methods for determination of epoxy compounds in the air of workplace
GBZ/T 300.37-2017 Determination of toxic substances in workplace air—Part 37: Carbon monoxide and carbon dioxide
GBZ/T 160.50-2004 Methods for determination of alkoxyethanols in the air of workplace
GBZ/T 160.32-2004 Methods for determination of oxides in the air of workplace

中华人民共和国国家卫生和计划生育委员会

GBZ/T 300.48-2017 Determination of toxic substances in workplace air—Part 48: Ozone and hydrogen peroxide

Professional Standard - Agriculture

GB 6324.3-1986 Test method for oxidation time of organic chemical products potassium permanganate

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1507-1979 Method for determination of active oxygen content in manganese ores
GB/T 31419-2015 Test methods for hazardous substances in fire escape mask
GB/T 41905-2022 Software and systems engineering—Capabilities of software testing tools
GB/T 17631-1998 Geotextiles and geotextile-related products-Test method for determining the resistance to oxidation

未注明发布机构

CSA ISO/IEC 20085-1:2020 IT Security techniques — Test tool requirements and test tool calibration methods for use in testing non-invasive attack mitigation techniques in cryptographic modules — Part 1: Test tools and techniques
CAN/CSA-ISO/IEC 30130:2016 Software engineering — Capabilities of software testing tools

Professional Standard - Military and Civilian Products

WJ 1577-1984 Fixtures for cold processing of optical parts and fixtures for special crafts Anodizing and strengthening fixtures

Professional Standard - Petroleum

SY/T 6119-1995 Rod Pump Well Working Condition Tester
SY/T 5710-2016 Technology procedure for performance inspection of well testing tools
SY/T 5710-2002 Technology procedure for performance inspection of testing tools
SY 5710-2016 Technical regulations for performance inspection of formation testing tools

Professional Standard - Post and Telecommunication

YD/T 1287-2013 Test method for ethernet switch with routing capability
YD/T 1287-2003 Test specification for ethernet LAN switch with routing capability

Professional Standard - Commodity Inspection

SN/T 3127-2012 Determination of organic peroxides in organic peroxide preparation-Liquid chromatography
SN/T 3656.5-2013 Testing specification of import and export dangerous chemical products.Part 5:Oxidizing substances and organic peroxides
SN/T 3074.5-2011 Import and Export of Hazardous Chemicals Testing Technical Specifications Part 5: Oxidizing Agents and Organic Peroxides

Taiwan Provincial Standard of the People's Republic of China

CNS 4798.19-1994 Method of test for toy safety (Tumble test for wheeled toys)
CNS 123-1972 Metric Taper for Tools 9-200 (with Flat End)

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39576-2020 Test methods for security capability of mobile terminal with syncretic function
GB/T 37597-2019 Electrically operated food preparation appliances—Methods for measuring the performance

Professional Standard - Aviation

HB 2089-1974 Measuring tools, measuring tool parts technical conditions
HB 2089-1989 Measuring tools, measuring tool parts technical conditions

Association Francaise de Normalisation

NF E71-002:1988 TOOLS FOR HAMMERING,HITTING AND RIVETTING. HAMMERS. EYE STRENGTH TEST.
NF E63-514:1999 Tools for moulding. Shouldered ejector pins.
NF E63-101:1973 Press tools-collar punch housings.
NF S54-006-1*NF EN 13209-1:2004 Child use and care articles - Baby carriers - Safety requirements and test methods - Part 1 : framed back carriers
NF ISO 10791-3:1999 Conditions d'essai pour centres d'usinage - Partie 3 : essais géométriques des machines à têtes universelles intégrées à indexage ou continues (axe Z vertical).
NF S54-006-1*NF EN 13209-1:2021 Child care articles - Child carriers - Safety requirements and test methods -Part 1 : framed back carrier
NF EN 16796-4:2019 Energy efficiency of industrial trucks - Test methods - Part 4: rough terrain trucks with variable reach
NF E65-121:1987 PORTABLE TOOLS. ACOUSTICS. TEST CODE FOR THE MEASUREMENT OF THE NOISE EMITTED BY HAND-HELD,POWER OPERATED,PORTABLE DRILLS.
NF EN ISO 11266:2020 Soil quality - Guidelines for laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions

GSO

GSO ISO 1701-1:2013 Test conditions for milling machines with table of variable height -- Testing of the accuracy -- Part 1: Machines with horizontal spindle
GSO ISO 1701-2:2013 Test conditions for milling machines with table of variable height -- Testing of accuracy -- Part 2: Machines with vertical spindle
GSO ISO 10791-2:2015 Test conditions for machining centres -- Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
GSO 1083:2002 METHODS OF TESTING CARBON DIOXIDE FOR INDUSTRIAL PURPOSES
OS GSO 138:1991 METHODS OF TESTING OXYGEN FOR INDUSTRIAL PURPOSES
GSO 138:1991 METHODS OF TESTING OXYGEN FOR INDUSTRIAL PURPOSES
BH GSO ISO/IEC 30130:2022 Software engineering — Capabilities of software testing tools
GSO ISO/IEC 30130:2021 Software engineering — Capabilities of software testing tools
OS GSO 1083:2002 METHODS OF TESTING CARBON DIOXIDE FOR INDUSTRIAL PURPOSES
OS GSO 1198:2002 METHOD OF TESTING LIQUID INK PENS HAVING POROUS POINTS
GSO ISO 1984-2:2013 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy -- Part 2: Machines with vertical spindle
GSO ISO 16047:2014 Fasteners -- Torque/clamp force testing
GSO 289:1994 ROAD VEHICLES - RETRO-REFLECTIVE NUMBER PLATES AND ITS METHODS OF TEST
GSO ISO 1984-1:2013 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy -- Part 1: Machines with horizontal spindle

RU-GOST R

GOST ISO 1985-2016 Surface grinding machines with vertical spindle and the mobile table. Test conditions. Testing of the accuracy
GOST R 50340-1992 Grinding machines for woodworking tools. Testing of rigidity
GOST 28687-1990 Reagents. Methods for the determination of peroxides in organic solvents
GOST R 50672-1994 Household chemical prodacts. Method for determination of active oxygen mass fraction
GOST 28687-2016 Reagents. Method for determination of peroxides in organic solvents
GOST 32432-2013 Testing of chemicals of environmental hazard. Aerobic and anaerobic transformation in aquatic sediment systems
GOST R 50614-1993 Electric hand-held tools. Particular safety requirements and methods of testing grinding, disk-grinding and polishing machines with rotational movement of operating tools
GOST 29158-1991 Woodworking machines. Mortising machines with oscillating tool action. Nomenclature
GOST R ISO 10791-1-2009 Machining centres. Part 1. Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
GOST 32633-2014 Test methods for chemicals of environmental hazard. Determination of aerobic and anaerobic transformation in soil
GOST 8.243-1977 State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified mutual inductance output parameters of the SSI. Methods and means of verification

SCC

VDI-MT 4068 BLATT 12-2021 Persons qualified to test - Testing of fire extinguishing systems
AWWA WQTC52805 Ultrafiltration Pilot Testing of a Challenging Softened Surface Water
DANSK DS/ISO/IEC 30130:2016 Software engineering – Capabilities of software testing tools
DIN 8958-2 E:2010 Draft Document - Testing of cooling equipment for insulated means of transportation - Part 2: Transport refrigerating systems with eutectic elements
DANSK DS/ISO/IEC 20085-1:2019 IT Security techniques – Test tool requirements and test tool calibration methods for use in testing non-invasive attack mitigation techniques in cryptographic modules – Part 1: Test tools and techniques
AENOR UNE-EN 12572-1:2017 Artificial climbing structures. Part 1: Safety requirements and test methods for SAE with protective points.
BS PD IEC TR 61278:1997 Live working. Guidelines for dielectric testing of tools and equipment
AWWA ACE70596 Simulation Tool Optimizes Advanced Oxidation Using UV Light and Hydrogen Peroxide
ASTM STP1379-00 Grips, Clamps, Clamping Techniques, & Strain Measurement for Testing of Geosynthetics
DANSK DS/EN 13248:2003 Cookware - Coffee makers for domestic use with an independant heat source - Definitions, requirements and test methods
AWWA WQTC69300 Implementing an Effective UV Advanced Oxidation Process
AWWA QTC97128 Chlorites and Chlorates: Field Tools to Monitor Chlorine Dioxide Treatment
AWWA ACE93214 Computer Assisted Design for Pump Stations: Design Tool, Drafting Tool--Or Both
AWWA WQTC60648 Nitrate as a Fluence Monitoring Tool — Industrial Scale Test Results
VDI/VDE 2647-2013 Type testing of screwing tools — torque and torque/angle testing
AS 2039.3.3:1978 Methods for testing anodic oxidation coatings on aluminium and aluminium alloys, Part 3.3: Corrosion tests - Mortar test for clear organic coatings on anodic oxidation coatings
AWWA QTC97068 Looking Upstream--Effective Tools for Source Water Protection
DANSK DS/EN 60229:2008 Electric cables - Tests on extruded oversheaths with a special protective function
CEI EN 60229:2010 Electric cables - Tests on extruded oversheaths with a special protective function
UNE 15308:2004 Machine tools. Boring and milling machines with horizontal spindle. Floor type machines with movable column . Test conditions. Testing of accuracy.
CAN/CSA-ISO/IEC 20085-1-2020 IT Security techniques - Test tool requirements and test tool calibration methods for use in testing non-invasive attack mitigation techniques in cryptographic modules - Part 1: Test tools and techniques (Adopted ISO/IEC 20085-1:2019, first edition, 20...
FM Approvals 6340:2022 Toxic Gas and Oxygen Depletion Detectors
AWWA WQTC62452 Watershed Pathogen Surveys — A Useful Tool
IAPMO IGC 224-2007 ABS, PVC and Cast Iron DWV Test Fitting with Integral Cleanout
CAN/CSA Z314.2-M91-1991 Effective Sterilization in Hospitals by the Ethylene Oxide Process
DANSK DS/ISO 11266:1997 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions

American Society of Mechanical Engineers (ASME)

ASME B107.29M-1998 Electronic Tester, Hand Torque Tools
ASME B107.300-2021 Hand Torque Tools and Torque Testers

PL-PKN

PN M55700-1956 Machines tools -- Lathe tools grinders -- Testing of accuracy
PN F06100 ArkusZ00-1973 Furniture Testing of finished surface properties
PN T84111-01-1987 Crimping tools for electrical connections Hand crimping tools Re?uirements and testing
PN C04578 ArkusZ06-1974 Werter ond w?sie 'woter Tests lor chemica! oxygen demand ond of organie cci bon content Datermination of biochemical twygen (BOD) by manometrie melhod
PN M66635-1991 Forging tools. Trimming die mounting with four posts tool sets. Semi-products
PN M59787-1989 Tools for micrometric tool cartridges
PN M66249-1991 Press tools. Boxes and heads. Requirements and testing
PN M55551-29-1987 Metal cut?ing machin? tools Methods of measurement lest of all dimensions of displacement
PN H94802-1985 Drop forging of nonferrous metals Requirements and testings
PN C04578-02-1985 Water and waste water Tests for chemical oxygen demand and of organie carbon content Determination of chemical oxygen demand (COD) by permanganate method
PN C04578 ArkusZ03-1974 Water and waste water Tests for chemical oxygen demand and of organie carbon content Determination of chemical oxygen demand (COD) by dichromate method
PN M59117-1986 Bonded abrasive tools Press in of bali method of hardness tes
PN Z08063-1970 Indusfrial safety canis?ers Test for impermeabili?y ?o carbon dioxide
PN H01567-1986 Nonferrous alloy gravity die castings Guide-lines for defining requirements and test
PN C04281-1987 Products Chemical Organie Methods test Determination of iodine value

HU-MSZT

MSZ 1189-1958 Tools and test metrics
MSZ 2517-1957 Rail vehicle equipment voltage
MSZ 21 853/12-1979 Detection of air pollution sources. Measurement of nitric oxide using a continuous tool
MNOSZ 1192-1952 Testing of agricultural and other hand tools
MSZ 21 869/4-1982 For rail transport using diesel, the polluted air test determines the emission of nitrogen oxides
MSZ 12969-1962 Industrial requirements and testing of lightweight thin tubes and standard measuring tools
MSZ 4055/4-1982 Inspection of medical hand tools pliers tools
MSZ 21869/4-1982 Engine air pollution detection of railway traction vehicles. Nitrogen dioxide detection
MSZ 21 869/5-1982 Railway traction tool engine air pollution detection. Hydrocarbon Emission Testing
MSZ 13068-1987 Industrial requirements and testing of four-corner joint repair tools
MSZ 21 853/11-1979 Detection of air pollution sources. Selective determination of nitric oxide and nitrogen dioxide using staged tools
MSZ 21 853/10-1979 Detection of air pollution sources. Determination of mixtures of nitric oxide and nitrogen dioxide using staged tools
MNOSZ 1976-1956 power tools try
MSZ 374/1-1969 Tool and Technical Greases and Testing Standards
MSZ 4055/6-1982 Doctor using hand tools to remove tools for testing
MNOSZ 15567-1953 Measuring tools for the mechanical industry
MSZ 5002-1962 Laboratory equipment measuring tools
MSZ 8880/1-1971 Electronic equipment testing tools and testing methods. touch tool
MNOSZ 15595-1953 Surveying measuring tools
MSZ 2705-1984 Standard specification for conical shelled metric tools
MNOSZ 15568-1953 Measuring tools for the mechanical industry
MNOSZ 4986-1955 Measuring tools for the mechanical industry
MSZ 15575-1958 Surveying measuring tools
MNOSZ 15590-1955 Surveying measuring tools
MNOSZ 20086-1956 geodetic survey tools

GOSTR

GOST 34479-2018 Machine tools. Test condition. Normtechical ensuring for perfectioning of diagnostic and repair-recover work methods of all availability tools
GOST ISO 3070-2-2017 Machine tools. Test conditions. Testing the accuracy of boring and milling machines with horizontal spindle. Part 2. Machines with movable column along an axis X and fixed table

Korean Agency for Technology and Standards (KATS)

KS A ISO 9960-1-2014(2019) Draughting instruments with or without graduation — Part 1: Draughting scale rules
KS B ISO 7371:2003 Household refrigerating appliances－Refrigerators with or without low－temperature compartment－Characteristics and test methods
KS B ISO 7371:2009 Household refrigerating appliances－Refrigerators with or without low－temperature compartment－Characteristics and test methods
KS B 0951-2008 Instrumented indentation tests on welds in steel－Measurement of residual stress on welded joints
KS B 4217-1999 Universal tool grinding machines-Test conditions for accuracy
KS D 9519-1978(2001) OPERATION STANDARD FOR CHROMIUM PLATING ON ZINC ALLOYS
KS M ISO 2025-2008(2013) Lined industrial rubber boots with general purpose oil resistance
KS D 0260-1989(1994) TESTING METHODS OF RESISTIVITY FOR SINGLE CRYSTAL SILICON WAFERS WITH FOUR-POINT PROBE
KS C IEC 60229-2019 Electric cables — Tests on extruded oversheaths with a special protective function
KS B ISO 2433:2020 Machine tools — Test conditions for external cylindrical and universal grinding machines with a movable table — Testing of the accuracy

BR-ABNT

ABNT EB-835-1979 Electrical tools testing laboratory for measurement

American Society for Testing and Materials (ASTM)

ASTM E298-01 Standard Test Methods for Assay of Organic Peroxides
ASTM E298-17 Standard Test Methods for Assay of Organic Peroxides
ASTM E298-98 Standard Test Methods for Assay of Organic Peroxides
ASTM E298-17a Standard Test Methods for Assay of Organic Peroxides
ASTM D5350-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM D5350-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM E299-17a Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
ASTM D5350-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM E299-17 Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
ASTM D1166-84(1995)e1 Standard Test Method for Methoxyl Groups in Wood and Related Materials
ASTM D1166-84(2007) Standard Test Method for Methoxyl Groups in Wood and Related Materials
ASTM D5352-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D6363-20 Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
ASTM D5352-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D5352-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D4620-02(2007) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber

AT-ON

ONORM S 1230-1998 Riveting tools - Test requirements
ONORM M 4811-1991 Grinding tools; testing by the manufacturer; marking

International Organization for Standardization (ISO)

ISO 8694:1998 Tools for moulding - Shouldered ejector pins
ISO 1917:1972 Hydrated sodium perborates for industrial use; determination of sodium oxide, boric oxide and available oxygen contents; volumetric methods
ISO/IEC 30130:2016 Software engineering - Capabilities of software testing tools
ISO 8694:1987 Tools for moulding; shouldered ejector pins
ISO/IEC 20085-1:2019 IT Security techniques — Test tool requirements and test tool calibration methods for use in testing non-invasive attack mitigation techniques in cryptographic modules — Part 1: Test tools and techniq
ISO 8018:2007 Tools for moulding - Guide bushes, headed, and locating guide bushes, headed
ISO 5815-1:2019 Water quality — Determination of biochemical oxygen demand after n days (BODn) — Part 1: Dilution and seeding method with allylthiourea addition
ISO 2135:2010 Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
ISO 2135:2017 Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light

VDI - Verein Deutscher Ingenieure

VDI 4068 BLATT 4-2018 Zur Pruefung befaehigte Personen - Anforderungen an die externe Ausbildung fuer die Pruefung handgefuehrter elektrisch betriebener Arbeitsmittel
VDI/VDE/DGQ 2618 BLATT 11.1-2012 Pruefmittelueberwachung - Pruefanweisung fuer mechanische Messuhren
VDI/VDE/DGQ 2618 BLATT 11.1-2001 Pruefmittelueberwachung - Pruefanweisung fuer Messuhren
VDI/VDE/DGQ 2618 Blatt 10.3-2000 Pruefmittelueberwachung - Pruefanweisung fuer Feinzeigermessschrauben
VDI/VDE/DGQ 2618 Blatt 10.8-2001 Pruefmittelueberwachung - Pruefanweisung fuer Innenmessschrauben mit 3-Linien-Beruehrung
VDI/VDE/DGQ 2618 Blatt 11.3-2000 Pruefmittelueberwachung - Pruefanweisung fuer Fuehlhebelmessgeraete

CO-ICONTEC

ICONTEC 1247-1981 Mechanical equipment, tools, inspection tools for testing

AENOR

UNE 15450-3:2000 Machine-tools. Test conditions of machining centres. Part 3: Geometric test for machines with integral indexable or continuous universal heads (horizontal Z axis).
UNE 16576:2002 Engineer's cold chisels, stonemason's chisels and alllied tools. Taper punches. Technical specifications and tests.
UNE 15450-2:2004 Machine-tools. Test conditions for machining centres. Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z axis).
UNE 16588:2001 Striking tools. Hammers, mallets and allied tools. Technical specifications and tests.
UNE 83321:2017 EX Concrete with photocatalytic activity. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials. Continuous flow test method
UNE 26524:2013 Test procedure for vehicle evaluation in wet proving ground with medium adherence.
UNE 16570:2005 WOODWORKING TOOLS. CHISELS AND GOUGES. NOMENCLATURE, SPECIFICATIONS AND TESTS.
UNE 16598:2004 Locking tools. Engineer's bench vise. Technical specifications and tests.
UNE 16563-2:1996 FORMING PIPE TOOLS. PART 2: FLARING TOOL BY SWIVELING. NOMENCLATURE, Specifications, tests and marking.

CL-INN

INDITECNOR 62-13 Industrial Water: Testing, Measurement of Oxygen Elements

BE-NBN

NBN T 03-344-1981 Hydrated sodium perborates for industrial use - Determination of sodium oxide, boric oxide and available oxygen contents - Volumetric methods

TR-TSE

TS 1822-1975 HYDRATED SODIUM PERBORATES FOR INDUSTRIAL USE DETERMINATION OF SODIUM OXIDE, BORIC OXIDE AND AVAILABLE OXYGEN CONTENTS- VOLUMETRIC METHOD

U.S. Air Force

AIR FORCE MIL-V-8057 F VALID NOTICE 3-2008 Valve, Oxygen, Pressure Buildup and Vent
AIR FORCE QPL-27617-8-2004 GREASE, AIRCRAFT, AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT

British Standards Institution (BSI)

BS ISO/IEC 20085-1:2019 IT Security techniques. Test tool requirements and test tool calibration methods for use in testing non-invasive attack mitigation techniques in cryptographic modules - Test tools and techniques
BS ISO/IEC 30130:2016 Software engineering. Capabilities of software testing tools
PD IEC TR 61278:1997 Live working. Guidelines for dielectric testing of tools and equipment
BS ISO 10791-3:1998 Test conditions for machining centres. Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
BS ISO 8018:2007 Tools for moulding - Guide bushes, headed, and locating guide bushes, headed
BS 5688-4:1979 Methods of test for boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of sodium oxide, boric oxide and available oxygen contents of hydrated sodium perborates
BS 6075-4:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of silica content
BS 6075-1:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of sodium hydroxide content
BS EN 50104:2002 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
DD ISO/TS 17104:2006 Rotary tool for threaded fasteners. Hydraulic impulse tools. Performance test method
BS EN IEC 63281-2-1:2024 E-Transporters - Safety requirements and test methods for personal e-Transporters
BS 7564-3:1992 Tools for moulding - Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered
BS EN ISO 11266:2020 Soil quality. Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions

Aeronautical Radio Inc.

ARINC 668-2003 GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY
ARINC 668 BOOK-2003 GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY

Military Standards (MIL-STD)

DOD A-A-54795-1993 WATER TESTING KIT, BACTERIOLOGICAL

American Welding Society (AWS)

WRC 461:2001 Experimental Leak Testing of 16-Inch Class 300 RFWN Flange with and Without External Bending Moment
AWS HOT-1987 Hands-On Training use of Measuring Tools for the AWS Certified Welding Inspector Hands-On Examination

RO-ASRO

STAS 582-1989 Assembly tools for screws and nuts DOUBLE HEAD ENGINEERS WRENCH WITH TORQUES TEST SERIES D Dimensions
STAS SR 13348-1998 Woodworking tools. Cutter head with adjustable tools. General technical requirements for quality
STAS 9542-1974 PRODUCTS OF CARBON Determination of carbon dioxide reactivity on mould tost specimens
STAS 12046/2-1984 CUTTING LIFE TESTING Tool-life ttsting methods of turning tools
STAS SR 11499-4-1998 Sugar - Mezofilic aerobic spores determination
STAS SR ISO 2787:1995 Rotary and percussive pneumatic tools - Performance tests
STAS 4868-1970 Mach!ne Tools PRECISION LATHES Accuracy tests
STAS 3002-1985 DRINKINGWATER Oxidizable organic substances determinat ion
STAS 251-1977 EXTENSION SOCKETS FOR TOOLS WITH MORSE TAPER Diraensions

European Telecommunications Standards Institute (ETSI)

ETSI TR 103 419-2016 Environmental Engineering (EE); Testing methodology for equipment able of dynamic performances adaptation (V1.1.1)
ETSI TS 102 351-2004 Methods for Testing and Specification (MTS); IP Testing; TTCN-3 IPv6 Test Specification Toolkit v1.1.1

WRC - Welding Research Council

BULLETIN 461-2001 EXPERIMENTAL LEAK TESTING OF 16-INCH CLASS 300 RFWN FLANGE WITH AND WITHOUT EXTERNAL BENDING MOMENT

ES-AENOR

UNE 77-080-1989 Methods for analyzing industrial water. Technical standards for oxygen content measuring tools

IN-BIS

IS 12563 Pt.1-1988 Pneumatic Tool Test Report Part 1 Rotary Tool Data Sheet
IS 9910-1981 Test method for brazing strength of coal and rock cutting tools with external tungsten carbide bits
IS 12563 Pt.2-1988 Pneumatic Tool Data Sheet Test Report Part 2 Impact Tools (With or Without Rotation)

KR-KS

KS B ISO 7371-2003 Household refrigerating appliances－Refrigerators with or without low－temperature compartment－Characteristics and test methods
KS B ISO 10791-3-2016 Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads(vertical Z-axis)
KS B ISO 2433-2020 Machine tools — Test conditions for external cylindrical and universal grinding machines with a movable table — Testing of the accuracy

U.S. Military Regulations and Norms

ARMY MIL-PRF-12048 E VALID NOTICE 1-2008 Petroleum Testing Kit, Ground Fuels
ARMY MIL-PRF-12048E-1998 PETROLEUM TESTING KIT, GROUND FUELS
ARMY QPL-4556-QPD-2010 Coating Kit, Epoxy, for Interior of Steel Fuel Tanks
ARMY MIL-DTL-52849 E-2008 TEST KIT - AVIATION FUEL CONTAMINATION (PORTABLE)
ARMY A-A-52576-2005 SURVEYOR'S TOOL POUCH

Universal Oil Products Company (UOP)

UOP 712-1971 Ferrox Test for Organic Oxygen Compounds in Propylene Dichloride and Carbon Tetrachloride

FI-SFS

SFS 901-1973 Tool steel. Sampling and material testing
SFS 3667-1976 Removable grounding tool. Structure and testing

German Institute for Standardization

DIN 14885:2005 Electrical tool-box for fire-brigades with insulated tools up to 1000 V
DIN 41641-1:1983-01 Tools for solderless electrical connections; hand crimping tools; concepts, requirements, testing
DIN 14885:2009 Electrical tool-box for fire-brigades with insulated tools up to 1000 V
DIN EN 13209-1:2004 Child use and care articles - Child carriers - Safety requirements and test methods - Part 1: Framed back carriers; German version EN 13209-1:2004
DIN EN 13248:2003-10 Cookware - Coffee makers for domestic use with an independent heat source - Definitions, requirements and test methods; German version EN 13248:2002
DIN 53235-1:2005-06 Testing of pigments - Tests on specimens having standard depth of shade - Part 1: Standard depths of shade
DIN EN ISO 11266:2021-03 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions (ISO 11266:1994); German version EN ISO 11266:2020

IPC - Association Connecting Electronics Industries

IPC DVD-FR93C- Retouches de Composants à Sorties en “S”
IPC 9251-2000 Test Vehicles for Evaluating Fine Line Capability

Society of Automotive Engineers (SAE)

SAE TS369-1-1987 TS369 Test for Electrical Connectors Use of Tools
SAE J1699/2-2017 Test Cases for OBD-II Scan Tools and I/M Test Equipment
SAE ARINC738-3-2001 GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY
SAE ARINC737-1-1988 GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY
SAE ARINC735-2-1993 GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY
SAE ARINC735A-1-2003 GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY
SAE ARINC732-1-1996 GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY
SAE ARINC735B-2-2015 GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY
SAE ARINC668-1-2013 GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY

Indonesia Standards

SNI 04-6710-2002 Household refrigerating appliances - Refrigerators with or without low temperature compartement - Characteristic and methods
SNI 19-1126-1989 Test method for sulfur dioxide content in a working area
SNI 19-1502-1989 Test method for nitrogen oxides content of air in working area
SNI 7697-2011 Procedure for testing samples of agricultural tools and machines

SSPC - The Society for Protective Coatings

QP 7-2003 Procedure for Evaluating Painting Contractors With Limited Industrial Work Experience

SE-SIS

SIS 11 77 90-1974 Methods for analysis of aluminium oxide. International recommendations'lstandards' validity as Swedish standard
SIS SS-ISO 2135:1985 Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
SIS SS-ISO 2787:1987 Rotary and percussive pneumatic tools - Performance tests
SIS SS 399-1984 External self-holding tapers for tapped tool shanks
SIS SS 2251-1981 Press tool die sets type A with rectangular working area and rear pillars
SIS SS 2254-1981 Press tool die sets type C with rectangular working area and centre pillars

CZ-CSN

CSN 34 7660-3F-1998 Power cables 0,6/1 kV with special fire performance for use in power stations - Section 3F: Cables with additional or amended requirements for oxygen-index testing of materials
CSN 91 0221-1986 Furniture. Testing the chairs and industrial seatings
CSN 47 0128-1974 Testing of plant protection machinery and implements
CSN 91 0224 ZZ3-2000 furniture. furniture testing
CSN 34 7660-4F-2000 Power cables 0,6/1 kV and 1,9/3,3 kV with special fire performance for use in power stations - Section 4F - Cables with additional or amended requirements for oxygen-index testing of materials

IT-UNI

UNI 5317-1963 Fixing tools. Brackets with holes for tie rods
UNI 7082-1972 Manual operating tools. Screwdriver with cross pattern screws
UNI 6988-1971 Measuring instruments. Go screw plug gauges for ISO metric threads with nominal diameter above 1,5 to 50 mm and setting plugs for go and not go screw calliper gauges with nominal diameter above 1,5 to 18 mm.
UNI 6989-1971 Measuring instruments. Setting plugs for go and not go screw calliper gauges for ISO metric threads with nominal diameter above 18 to 50 mm.
UNI 7077-1972 Manual operating tools. Slotted screws with screwdriver
UNI 6770-1970 Casting tools. Metal profile plate with longitudinal datum
UNI 6765-1970 Casting tools. Cast bracket with longitudinal datum
UNI 6771-1970 Casting tools. Metal plate with triangular datum
UNI 7078-1972 Manual operating tools. Screwdriver for slotted screws without nail head
UNI 6750-1970 Manual operating tools. Handle socket wrench
UNI 6751-1970 Manually operated tools with internally threaded operating discs
UNI 6766-1970 Casting tools. Cast bracket with triangular datum

ES-UNE

UNE-EN 13248:2003 Cookware - Coffee makers for domestic use with an independent heat source - Definitions, requirements and test methods.
UNE-EN ISO 11266:2021 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions (ISO 11266:1994)

International Telecommunication Union (ITU)

ITU-T Q.780 SERIES SUPP 1-1995 Signalling System No.7 testing and planning tools

PT-IPQ

NP EN ISO 11554:2000 Optics and optical instruments Lasers and laser-related equipment Test methods for laser beam power,energy and temporal characteristics(ISO 11554:1998)

AR-IRAM

IRAM 5147-1961 Cutting tool with carbide blade

CU-NC

NC 92-45-1987 Quality Control. Reliability Characteristics of Test Planes

United States Navy

NAVY MIL-C-16385 E-1972 CARTRIDGE, CARBON DIOXIDE, INFLATABLE LIFE PRESERVER USE
NAVY MIL-C-16385 E (1)-1988 CARTRIDGE, CARBON DIOXIDE, INFLATABLE LIFE PRESERVER USE
NAVY DOD-K-24674-1986 KIT, DISSOLVED OXYGEN (METHOD C), NAVAL SHIPBOARD (METRIC)

GM North America

GM GM9055P-1988 Method for Measuring Peroxide Number Organic Peroxides in Hydrocarbons

Association of German Mechanical Engineers

VDI/VDE/DGQ 2618 Blatt 1-1991 Testing instructions for checking gauges and measuring tools; introduction

API - American Petroleum Institute

API HUMAN FACTORS 2006-2006 Human Factors Tool for Existing Operations (First Edition)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE AT-96-1-1-1996 Development and Testing of a Prototype Tool for HVAC Control System Commissioning
ASHRAE KC-03-2-2-2003 Inverse Modeling Toolkit: Application and Testing (RP-1050)

GM Europe

GME GMI L/R-10E-1-2008 Static and Dynamic Testing Spare Wheel/Tool Compartment Cover (English/German;This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14278.)

Others: Security testing 75 tools,test tools,test kit,Other test equipment and instruments,Aerobic and Anaerobic Tests,Test hardness tool,Optical Test Tool,test tools,what tools to use for testing,tester tools,tester tools,k6 test tool,Smoke Test Tool,network testing tools,Aerobic Test Tool,Petroleum Testing Tools,Tool Test Equipment