Palladium Adsorption of Hydrogen

Palladium Adsorption of Hydrogen, Total:77 items.

The international standard classification for "Palladium Adsorption of Hydrogen" includes: Wind turbine systems and other alternative sources of energy , Fuels , Other products of non-ferrous metals , Food additives .

The Chinese standard classification for "Palladium Adsorption of Hydrogen" includes: New energy and others , Charcoal , Precious metals and their alloys , Heavy metals and their alloys , Natural food additives .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 29412-2012 Adsorber of pressure swing adsorption for hydrogen purification
GB/T 44007-2024 Nanotechnologies—Measurement of the hydrogen storage capacity of nanoporous materials—Gas adsorption method
GB/T 17665-1999 Test method of wooden granular activated carbon adsorption to CCI4 vapor
GB/T 32992-2016(英文版) Determination of gold adsorption capacity and rate of activated carbon
GB/T 42857-2023 Safety of pressure swing adsorption systems for hydrogen purification
GB/T 19773-2005 Specification of hydrogen purification system on pressure swing adsorption

工业和信息化部

YS/T 416-2016 Palladium alloy tube for hydrogen purification

Professional Standard - Non-ferrous Metal

YS/T 416-1999 Palladium alloy pipes for purifying hydrogen
YS/T 208-1994 Palladium alloy foils for purifying hydrogen
YS/T 208-2006 Palladium alloy foils for purifying hydrogen

Professional Standard - Forestry

LY/T 1971-2011 Activated carbon for hydrogen purification by pressure swing adsorption

Group Standards of the People's Republic of China

T/QGCML 2275-2023 Purified air adsorption tower
T/CIET 601-2024 Hydrogen pressure swing adsorption purification technical specifications
T/CSEE 0284-2022 Technical conditions of hydrogen-cooled generator adsorption regenerative gas dryer
T/CEEIA 606-2022 Technical requirements of the adsorption regeneration gas dryer forhydrogen-cooled generators

Professional Standard - Energy

NB/T 10915-2021 Technical requirements of regenerative adsorption hydrogen dryer of nuclear power plant

Yunnan Provincial Standard of the People's Republic of China

DB53/T 590-2014 Palladium chloride chemical analysis method Determination of palladium content Hydrogen reduction gravimetric method

未注明发布机构

CGA H-13-2023 HYDROGEN PRESSURE SWING ADSORBER (PSA) MECHANICAL INTEGRITY REQUIREMENTS

Professional Standard - Electron

SJ/T 10273-1991 Generic specification for hydrogen purifier in catalyst absorption

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34540-2017 Specification of hydrogen production by methanol reforming and pressure swing adsorption

British Standards Institution (BSI)

PD ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
BS PD ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
BS EN ISO 6978-1:2005 Natural gas. Determination of mercury. Sampling of mercury by chemisorption on iodine
BS ISO 16111:2008 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
BS ISO 16111:2009 Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride

SCC

DANSK DS/ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
VDI 2454 BLATT 1-1982 Measuring gaseous emissions; measuring hydrogen sulphide concentration; molybdenum blue sorption method
AWWA JAW56601 Journal AWWA — Effects of CO(3)2-/bicarbonate, Si, and PO(4)3- on Arsenic Sorption to HFO
AWWA ACE99457 The Effect of Strongly Adsorbing NOM on PAC Adsorption Capacity for Atrazine in a Continuous Flow System
VDI 2454 BLATT 1-1982 Measuring gaseous emissions; measuring hydrogen sulphide concentration; molybdenum blue sorption method
AWWA ACE63141 Predicting the Adsorption Capacity of Activated Carbon for Organic Contaminants from Adsorbent and Adsorbate Properties
AWWA WQTC55035 Full-Scale Adsorption of HAA5 by Activated Carbon
AWWA MTC93049 Impact of Adsorption on Ultrafiltration Membrane Fouling
SA TS 19883:2020 Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, MOD)
AWWA JAW10334 Journal AWWA — Adsorption of Chlorinated Methanes From Aqueous Solution on Selected Plastic Adsorbents
AWWA ACE95081 Humic Substance Adsorption by Activated Carbon and Impacts of Preloading on Trichloroethylene Adsorption: Effects of Solution Chemistry
DANSK DS/ISO 16111:2018 Transportable gas storage devices – Hydrogen absorbed in reversible metal hydride
AWWA WQTC60780 Modeling of Water Quality Interferences on Arsenic Adsorbents
BS ISO 6978-1:2003 Natural gas. Determination of mercury. Sampling of mercury by chemisorption on iodine
AWWA ACE93133 Adsorption of Atrazine by Powdered Activated Carbon
AWWA JAW65357 Journal AWWA — Modeling of Arsenic(V) Adsorption onto Granular Ferric Hydroxide
AWWA ACE63078 Effect of pH, In-Situ Hydroxide Formation, and Competing Ions on As(III/V) Adsorption During Coagulation with Ferric Chloride
AWWA JAW48109 Journal AWWA — Effect of Chlorine on PAC's Ability to Adsorb MIB
AWWA ACE54273 Macromolecular Adsorption by Activated Carbons and Carbon Fibers
AWWA WQTC57130 The Influence of Water Quality on Arsenate Sorption Kinetics
AWWA JAW48153 Journal AWWA — TCE Adsorption by GAC Preloaded With Humic Substances
07/30148170 DC BS ISO 16111. Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride

International Organization for Standardization (ISO)

ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
ISO 16111:2008 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
ISO 16111:2018 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
ISO 6978-1:2003 Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine
ISO/TS 16111:2006 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride

ZA-SANS

SANS 339:2007 Sorbents for hydrocarbon-based products

GSO

GSO ISO 16111:2015 Transportable gas storage devices -- Hydrogen absorbed in reversible metal hydride
BH GSO ISO 16111:2017 Transportable gas storage devices -- Hydrogen absorbed in reversible metal hydride
DL/T 2775-2024 Harm reduction treatment of waste sulfur hexafluoride electrical equipment adsorbent calcium hydroxide method

Standard Association of Australia （SAA）

AS ISO 16111:2020 Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride

Japanese Industrial Standards Committee (JISC)

JIS H 7202:2007 Method for measurement of hydrogen absorption/desorption reaction rate of hydrogen absorbing alloys
JIS H 7203:1995 Method for assessing the characteristics of cyclic hydrogen absorption/desorption of hydrogen absorbing alloys
JIS H 7203:2007 Method for measuremet of hydrogen absorption/desorption cycle characteristic of hydrogen absorbing alloys

Association Francaise de Normalisation

NF X20-525-1*NF EN ISO 6978-1:2005 Natural gas - Determination of mercury - Part 1 : sampling of mercury by chemisorption on iodine.

Korean Agency for Technology and Standards (KATS)

KS B ISO 16111-2009(2020) Transportable gas storage devices－Hydrogen absorbed in reversible metal hydride
KS B ISO 16111:2009 Transportable gas storage devices－Hydrogen absorbed in reversible metal hydride
KS I ISO 6978-1:2009 Natural gas－Determination of mercury－Part 1：Sampling of mercury by chemisorption on iodine
KS D 8504-2021 Method for assessing the characteristics of cyclic hydrogen absorption/desorption of hydrogen absorbing alloys
KS D 8504-1996(2021) Method for assessing the characteristics of cyclic hydrogen absorption/desorption of hydrogen absorbing alloys

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE LV-11-C051-2011 Effects of HVAC Operations on Sorptive Interactions

Danish Standards Foundation

DS/ISO 16111:2012 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride

API - American Petroleum Institute

API PUBL 34-33036-1987 STUDIES ON THE ABSORPTION OF INHALED HYDROCARBON VAPORS Final Report
API PUBL 4469-1988 Sorption/Desorption of Soluble Petroleum Constituents by Materials Used in Monitoring Wells

SAE - SAE International

SAE ARP1156-1969 REQUISITES FOR DESIGN SPECIF. FOR ADSORPTIVE SYS.

European Committee for Standardization (CEN)

EN ISO 6978-1:2005 Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine (ISO 6978-1:2003 )

German Institute for Standardization

DIN EN ISO 6978-1:2005 Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine (ISO 6978-1:2003); English version of DIN EN ISO 6978-1

U.S. Military Regulations and Norms

ARMY MIL-PRF-32016 A-2002 CELL, GAS PHASE, ADSORBER

American Society for Testing and Materials (ASTM)

ASTM UOP501-83 Hydrocarbon Types by Fluorescent Indicator Adsorption (FIA) at Elevated Temperatures
ASTM F726-06 Standard Test Method for Sorbent Performance of Adsorbents

GB-REG

REG NASA-LLIS-0851-2000 Lessons Learned ?GHe Purging of Hydrogen Systems

Others: Palladium Adsorption of Hydrogen