The principle of the magnetic wheel

The principle of the magnetic wheel, Total:74 items.

The international standard classification for "The principle of the magnetic wheel" includes: .

The Chinese standard classification for "The principle of the magnetic wheel" includes: Moving parts .

Professional Standard - Railway

TB/T 2983-2000 Railway Wheels - Magnetic Particle Inspection

American Petroleum Institute (API)

API PUBL 960-1985 Evaluation of the Principles of Magnetic Water Treatment

German Institute for Standardization

DIN 42026-2:1980-08 Permanent magnet segments; measuring principle
DIN 42026-2:1980 Permanent magnet segments; measuring principle
DIN 50460:1988-08 Determination of magnetic properties of soft magnetic materials; general, terminology and principles of measurement
DIN 4312:1983-12 Industrial-type turbines; steam turbines and gas expansion turbines; construction principles for industrial-type turbines
DIN 51354-1:1990 Lubricant Testing FZG Gear Test Bench General Working Principle
DIN 18088-1:2019 Structures for wind turbines and platforms - Part 1: Basic principles and actions
DIN 6876 Supplement 1:2023 Operation of medical magnetic resonance systems; Supplement 1: General explanations and rationales
DIN 54136-1:1988-10 Non-destructive testing; magnetic leakage flux testing by scanning with probes; principles
DIN 3979:1979 Tooth Damage on Gear Trains; Designation, Characteristics, Causes

Association of German Mechanical Engineers

VDI 2731 Blatt 1-2009 Micro gears - Basic principles

Ente Nazionale Italiano di Unificazione

UNI 7880-2:1979 Gears. System of accuracy of parallel involute gears. Basic principles.
UNI EN ISO 9934-1:2003 Non-destructive testing - Magnetic particle testing - General principles
UNI SPERIMENTALE 8862-1:1987 Calculation of load capacity of spur and helical gears. Principles, symbols, fundamental formulaes and limit parameters.

British Standards Institution (BSI)

PD 6513:1985 Magnetic particle flaw detection. A guide to the principles and practice of applying magnetic particle flaw detection in accordance with BS 6072
BS PD 6513:1985 Magnetic particle flaw detection. A guide to the principles and practice of applying magnetic particle flaw detection in accordance with BS 6072
BS PD ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears. Introduction and basic principles
BS PD ISO/TR 15144-1:2010 Calculation of micro-pitting load capacity of cylindrical spur and helical gears-Introduction and basic principles
BS ISO 6336-1:2019 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
BS ISO 6336-1:1996 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
BS ISO 6336-1:2006 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
BS ISO 6336-1:1997 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
BS ISO 22090-2:2014 Ships and marine technology. Transmitting heading devices (THDs). Geomagnetic principles
BS ISO 22090-2:2004 Ships and marine technology. Transmitting heading devices (THDs)-Geomagnetic principles

Swiss Association for Standardization (SNV)

SNV 40670-1959 Magnetic steel plate testing and supply conditions principles
SNV 742 402.5-1966 Principle of speed adjustment of hydraulic turbine generator set

Swedish Institute for Standards

SIS SEN 01 26 81-1974 Symbols for electrical diagrams. Ferrite cores. Magnetic storage devices

Czech Standards Institute (UNMZ)

CSN 22 4500-1987 Abrasive and cutting wheels, abrasive materials Compilation
CSN 35 3690-1957 Electromagnetic drum
CSN 48 0204 Z2-1999 log. wheel. Measurement defects

Society of Automotive Engineers (SAE)

SAE J2059_201302 All-Wheel-Drive Drivetrain Schematic Symbol Standards
SAE J2059_201804 All-Wheel-Drive-Drivetrain Schematic Symbol Standards
SAE J2059_199208 All-Wheel-Drive Drivetrain Schematic Symbol Standards
SAE J2059-1992 All-Wheel-Drive Drivetrain Schematic Symbol Standards
SAE J2059-2018 All-Wheel-Drive Drivetrain Schematic Symbol Standards
SAE J2059-2013 J2059 All-Wheel Drive Drivetrain Schematic Symbol Standard and Drawings
SAE J2059ZIP-0220 J2059 All-Wheel Drive Drivetrain Schematic Symbol Standard and Drawings

Korean Agency for Technology and Standards (KATS)

KS V ISO 22090-2-2015(2020) Transmitting heading devices(THDs) － Part 2: Geomagnetic principles
KS V ISO 22090-2-2015(2025) Transmitting heading devices (THDs) - Part 2: Geomagnetic principles
KS V ISO 22090-2-2020 Transmitting heading devices(THDs)－Part 2：Geomagnetic principles
KS X ISO/IEC 10000-2-2003(2008) Information technology－Framework and taxonomy of International Standardized Profiles－Part 2：Principles and Taxonomy for OSI Profiles
KS B 7397-1995(2009) Flywheel type magnetos
KS B 7396-2004 Axle type magnetos
KS B 7397-1995 Flywheel magnetos
KS B ISO 6336-1-2015(2020) Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors
KS B ISO 6336-1-2020 Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors

Gosstandart of Russia

GOST 29037-1991 Electromagnetic compatibility of technical means. Certification tests. Ceneral rules
GOST ISO 9934-1-2021 Non-destructive testing. Magnetic particle testing. Part 1. General principles
GOST 29073-1991 Electromagnetic compatibility for industrial process measurement and control equipment. Immunity to electromagnetic disturbance. General introduction

GCC Standardization Organization

GSO ISO 22090-2:2013 Ships and marine technology -- Transmitting heading devices (THDs) -- Part 2: Geomagnetic principles
GSO ISO 6336-1:2013 Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors

International Committee for Information Technology Standards (INCITS)

INCITS 89-1981(R1998) Unrecorded Single-Disk, Double-Density Cartridge (Front Loading 2200 BPI, 200 TPI), General, Physical and Magnetic Requirements (formerly ANSI X3.89-1981(R1998))

The Institution of Engineering and Technology (IET)

FUND ELECTRO LEVIT-2012 Fundamentals of Electromagnetic Levitation: Engineering sustainability through efficiency

Danish Standards Foundation

DS/ISO/TR 15144-1:2011 Calculation of micropitting load capacity of cylindrical spur and helical gears – Part 1: Introduction and basic principles
DANSK DS/ISO/TR 15144-1:2011 Calculation of micropitting load capacity of cylindrical spur and helical gears - Part 1: Introduction and basic principles
DANSK DS/ISO 6336-1:2019 Calculation of load capacity of spur and helical gears – Part 1: Basic principles, introduction and general influence factors

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO/TR 15144-1:2013 Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles
OS GSO ISO 6336-1:2013 Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors

Magyar Szabványügyi Testület

MSZ 14 501-1976 Preparation of Verticillium protoplasts

International Organization for Standardization (ISO)

ISO/TR 15144-1:2010 Calculation of micropitting load capacity of cylindrical spur and helical gears - Part 1: Introduction and basic principles
ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears - Part 1: Introduction and basic principles
ISO 6336-1:2019 Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO/TR 15144-1:2016 Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles

U.S. Military Regulations and Norms

ARMY A-A-59167-1998 MAGNET MATERIALS, PERMANENT
ARMY A-A-59167 VALID NOTICE 1-2004 MAGNET MATERIALS, PERMANENT

Association Francaise de Normalisation

NF E23-030-1*NF ISO 6336-1:2020 Calculation of load capacity of spur and helical gears - Part 1: basic principles, introduction and general influence factors
NF ISO 6336-1:2020 Calculation of the load capacity of spur and helical gears - Part 1: basic principles, introduction and general influencing factors
NF E23-030-1:2006 Calculation of load capacity of spur and helical gears - Part 1 : basic principles, introduction and general influence factors.
NF A09-590-1/A1:2004 Non-destructive testing - Magnetic particles testing - Part 1 : general principles.

American National Standards Institute （ANSI)

ANSI/INCITS 46-1974 Unrecorded Magnetic Six-Disk Pack (General, Physical, and Magnetic Requirements) formerly ANSI X3.46-1974 [Replaced: ANSI X3.46, ANSI X3.46]

American Gear Manufacturers Association

AGMA 914-B04-2004 Gear Sound Manual Part I - Fundamentals of Sound as Related to Gears Part II - Sources, Specifications and Levels of Gear Sound Part III - Gear Noise Control

Japanese Industrial Standards Committee (JISC)

JIS B 8034:1976 Flywheel magnetos

Military Standards (MIL-STD)

MIL MIL-T-82394-1969 TRAINING AID, TURBINE PRINCIPLE DEMONSTRATOR (NO S/S DOCUMENT)

Others: Principle of the measuring wheel,Principle of magnetic wheel,Magnetic Wheel Schematic,How the wheel works,The principle of the magnetic wheel,The principle of magnetism