experimental error

experimental error, Total:102 items.

The international standard classification for "experimental error" includes: Non-ferrous metals in general , Ceramic products , Photographic equipment. Projectors , Measurement of force, weight and pressure , Limits and fits .

The Chinese standard classification for "experimental error" includes: Heavy metal ore , Daily use ceramics products , Optical instrument in general , Temperature and pressure instrument , Basic standards and general methods .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11337-2004 Measurementof departures from flatness
GB/T 3301-1999 Standard method for measurement of volume，rim diameter allowance，hight allowance，weight allowance and size of defects of domestic ceramic ware
GB/T 27680-2011 Copper,lead,zinc and nickel concentrates—Experimental methods for checking the bias of sampling
GB/T 11336-2004 Measurement of departures from straightness
GB/T 7242-1987 Centering errors of lenses
GB/T 11337-1989 Measurement of departures from flatness
GB/T 11336-1989 Measurement of departures from straightness
GB/T 27504-2011 Pressure gauge error table

Professional Standard - Electron

SJ/Z 3206.14-1989 General rules for error in spectrum chemical analysis and data processing in laboratories

Anhui Provincial Standard of the People's Republic of China

DB34/T 3601-2020 Measurement of Thermal Error of Precision NC Machine Tool in Actual Cutting State

Professional Standard - Aviation

HB 7-1-1968 error curve clamp

未注明发布机构

JIS M 8709:2023 Iron ores -- Experimental methods for checking the bias of sampling

Professional Standard - Machinery

JB/T 7557-1994 Coaxiality Error Detection
JB/T 9277-1999 Pressure gauge error meter

RU-GOST R

GOST ISO 7347-1994 Ferroalloys. Experimental methods for checking the bias of sampling and sample preparation
GOST R 53133.1-2008 Clinical laboratory technologies. Quality control of clinical laboratory tests. Part 1. Limits of allowable errors of the results of the analyte measurements in clinical-diagnostics laboratories

American Gear Manufacturers Association

AGMA 95FTM4-1995 Experimental Test Stand to Measure Loaded Transmission Error in Fine-Pitch Plastic Gears
AGMA 92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
AGMA 90FTM9-1990 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears
AGMA 90FTM11-1990 Multiple Iteration- Respectable Trial-and-Error

AGMA - American Gear Manufacturers Association

95FTM4-1995 Experimental Test Stand to Measure Loaded Transmission Error in Fine-Pitch Plastic Gears
92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
90FTM9-1990 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears

International Organization for Standardization (ISO)

ISO/TS 22367:2008/cor 1:2009 Medical laboratories - Reduction of error through risk management and continual improvement; Technical Corrigendum 1
ISO 3086:1986 Iron ores; Experimental methods for checking the bias of sampling
ISO 3086:2006 Iron ores - Experimental methods for checking the bias of sampling
ISO 9498:1993 Fluorspar; experimental methods for checking the bias of sampling and sample preparation
ISO 9497:1993 Flourspar; experimental methodes for evaluation of quality variation
ISO/TR 16907:2015 Machine tools - Numerical compensation of geometric errors

RO-ASRO

STAS 7444-1979 SEEDS FOR SOWING Test reports and permissible differences between tests
STAS SR ISO 3086:1995 Iron ores. Experimental methods for checking the bias sampting

YU-JUS

JUS M.A1.246-1978 Tolerances in mechanical engineering. Tolerances of form and of position. Practical axamples of indications on drawings

Japanese Industrial Standards Committee (JISC)

JIS Z 8402:1991 General rules for permissible tolerance of chemical analyses and physical tests
JIS M 8709:2006 Iron ores -- Experimental methods for checking the bias of sampling

VN-TCVN

TCVN 3710-1981 Aquatic products.Errors in chemical tests
TCVN 6805-2001 Aluminium ores.Experimental methods for checking the bias of sampling

European Committee for Standardization (CEN)

EN ISO/TS 22367:2010 Medical laboratories - Reduction of error through risk management and continual improvement

British Standards Institution (BSI)

BS DD CEN ISO/TS 22367:2008 Medical laboratories - Reduction of error through risk management and continual improvement
BS ISO 3086:2006 Iron ores - Experimental methods for checking the bias of sampling
BS ISO 3086:2006(2010) Iron ores — Experimental methods for checking the bias of sampling
BS EN 61025:2007 Fault tree analysis (FTA)
BS PD ISO/TR 16907:2015 Machine tools. Numerical compensation of geometric errors

American Society for Testing and Materials (ASTM)

ASTM D6091-03 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
ASTM E2862-18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
ASTM D6091-07(2014) Standard Practice for 99?%/95?% Interlaboratory Detection Estimate 40;IDE41; for Analytical Methods with Negligible Calibration Error
ASTM D6552-06(2021) Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
ASTM D6552-06(2016) Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
ASTM D6091-07 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error

ESDU - Engineering Sciences Data Unit

ESDU 85011 A-1991 Pitot and static errors due to non-steady flight.
ESDU 85011 B-2013 Pitot and static errors due to non-steady flight
ESDU 86006 A-1992 Pitot and static errors in steady level flight.

AT-ON

ONORM M 6775 Teil.4-1987 Accuracy of bevel gears; tolerances for shaft angle errors and common apex errors

Association Francaise de Normalisation

NF X06-047:1986 Application of statistical. Treatment of measured results. Errors estimation from interlaboratory comparaisons.

VDI - Verein Deutscher Ingenieure

VDI 3393-2014 Eingrenzung von Schleiffehlern
VDI 3393-1999 Grinding errors
VDI 3393-1975 Grinding errors

HU-MSZT

MSZ 6552-1959 Measurement error
MSZ 6550-1965 structural error
MSZ 19785-1981 Error in fan operating parameters
MSZ 7492-1980 Error and error concept of big wheels and saw blades

American National Standards Institute （ANSI)

ANSI C63.6-1996 Guide for the Computation of Errors in Open-Area Test Site Measurements
ANSI/SCTE 132-2012 Test Method for Reverse Path (Upstream) Bit Error Rate

Society of Automotive Engineers (SAE)

SAE AIR1608B-2020 Estimation of Total Error in Altimetry
SAE AIR1608-1994 ESTIMATION OF TOTAL ERROR IN ALTIMETRY
SAE AIR1608A-2008 Estimation of Total Error in Altimetry
SAE AIR1608A-2002 Estimation of Total Error in Altimetry

Korean Agency for Technology and Standards (KATS)

KS B 5325-2009 Proving methods for liquid flowmeters
KS E ISO 3086:2010 Iron ores-Experimental methods for checking the bias of sampling
KS E ISO 10226-2022 Aluminium ores－Experimental methods for checking the bias of sampling
KS E ISO 3086-2020 Iron ores－Experimental methods for checking the bias of sampling
KS E ISO 10226-2003(2022) Aluminium ores－Experimental methods for checking the bias of sampling
KS E ISO 10226:2003 Aluminium ores-Experimental methods for checking the bias of sampling
KS D ISO 7347-2023 Ferroalloys－Experimental methods for checking the bias of sampling and sample preparation

CZ-CSN

CSN 79 5790-2001 Footwear. acceptable error

SAE - SAE International

SAE AIR1608-1989 Estimation of Total Error in Altimetry

GSO

BH GSO ISO 3086:2016 Iron ores -- Experimental methods for checking the bias of sampling
OS GSO ISO 3086:2013 Iron ores -- Experimental methods for checking the bias of sampling
GSO ISO 10226:2015 Aluminium ores -- Experimental methods for checking the bias of sampling
OS GSO ISO 10226:2015 Aluminium ores -- Experimental methods for checking the bias of sampling
BH GSO ISO 10226:2017 Aluminium ores -- Experimental methods for checking the bias of sampling
GSO ISO/TR 16907:2017 Machine tools -- Numerical compensation of geometric errors
OS GSO ISO/TR 16907:2017 Machine tools -- Numerical compensation of geometric errors
GSO ISO 3086:2013 Iron ores -- Experimental methods for checking the bias of sampling
BH GSO ISO 13292:2017 Copper, lead, zinc and nickel concentrates -- Experimental methods for checking the bias of sampling

Aeronautical Radio Inc.

ARINC 651-1 ITEM 4.0-1997 Fault Tolerance

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T G.135 SPANISH-1988 Error on the Reconstituted Frequency

Association of German Mechanical Engineers

VDI 3393-2016 Limiting of grinding errors

BE-NBN

NBN B 15-236-1983 Formed concrete testing. Dimensions and tolerances of cast test tubes

PT-IPQ

NP 107-1962 Tolérances et ajustements. Terminologie

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C63.6-1988 Guide for the computation of errors in open-area test site measurements
IEEE Std C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements

TR-TSE

TS 2829-1977 IRON ORES - EXPERIMENTAL METHODS FOR CHECKING THE BIAS OP SAMPLING

IT-UNI

UNI ISO 5459:1986 Technical drawings. Description of geometric errors. Geometric Error Datums and Datum Systems
UNI 3963-P1-1978 Surface geometric errors. general definition
UNI 8104-P2-1980 Construction industry. Size deviation. Error measurement method

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS CISPR 16.4.1:2006 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

IETF - Internet Engineering Task Force

RFC 4064-2005 Experimental Message@ Extensions@ and Error Codes for Mobile IPv4

Spanish Association for Standardization (UNE)

UNE-ISO/TR 16907:2018 IN Machine tools -- Numerical compensation of geometric errors

US-FCR

FCR FED H-08-6 SEC 511-1978 LIST OF LABORATORY FURNITURE EQUIPMENT SYMBOLS ERRATA

SCC

BS ISO 3086:1998 Iron ores. Experimental methods for checking the bias of sampling

International Telecommunication Union (ITU)

ITU-R F.1605 SPANISH-2003 Error performance and availability estimation for synchronous digital hierarchy terrestrial fixed wireless systems

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE MN-00-4-2-2000 Effects of Measurement and Formulation Error on Thermal Comfort Indices in the ASHRAE Database of Field Studies