Quality Monitoring and Emissions

Quality Monitoring and Emissions, Total:191 items.

The international standard classification for "Quality Monitoring and Emissions" includes: Transport exhaust emissions .

The Chinese standard classification for "Quality Monitoring and Emissions" includes: Pollutants discharge in general , Gas turbine and its auxiliary equipment .

Professional Standard - Agriculture

空气和废气监测分析方法 5.1.4-2003 Chapter 5 Pollution Source Monitoring Chapter 1 Sampling 4 Emission Concentration Calculation of Emissions
空气和废气监测分析方法 5.5.8-2003 Part V Monitoring of Pollution Sources Chapter V Continuous Monitoring of Flue Gas Pollutant Discharge VIII Quality Assurance and Quality Control
空气和废气监测分析方法 5.5.7-2003 Part Five Pollution Source Monitoring Chapter Five Continuous Monitoring of Flue Gas Pollutant Emission Seven Calculation of Emission Concentration and Total Emission

Group Standards of the People's Republic of China

T/CSTA 0049-2023 Technical Specifications for Carbon Emission Monitoring and Measurement of Iron and Steel Enterprises
T/ZZB 1096-2019 Continuous emission monitoring system
T/CICEIA /CAMS41-2022 Space-Ground-Vehicle-People integration (SGVP) - Mobile source emission monitoring system - Specifications for rapid measurement and evaluation of vehicle emissions: Remote sensing method
T/GDCKCJH 089-2024 General specification of the carbon emissions monitoring and measuring for industrial enterprises
T/SSEA 0318-2023 Technical Specifications for Carbon Emission Monitoring and Measurement of Iron and Steel Enterprises

Professional Standard - Environmental Protection

HJ/T 92-2002 Technical requirements for monitoring of total amount of pollutants in waste water

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 18345.2-2001 Gas turbines - Exhaust gas emission- Part 2: Automated emission monitoring

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 3882-2025 Technical Specifications for Data Transmission and Interface of Online Monitoring System for Carbon Emissions of Key Emission Units Power Generation Enterprises

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 1122.1-2019 Technical Specifications for Environmental Monitoring of Expressway Part 1: Environmental Quality Monitoring during Construction Period

Tianjin Provincial Standard of the People's Republic of China

DB12/T 1325-2024 Technical specification for online monitoring of ammonia emission flux from closed livestock and poultry houses

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2051-2020 Technical Specifications for Quality Control of Operation and Maintenance of Continuous Monitoring System for Flue Gas Emission from Stationary Pollution Sources

未注明发布机构

DWA-A 198 Korrekturblatt:2004-12 Drainage water quality monitoring and evaluation

Ente Nazionale Italiano di Unificazione

UNI CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance
UNI EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
UNI EN ISO 11771:2011 Air quality - Determination of time- averaged mass emissions and emission factors - General approach
UNI 11761:2023 Emissions and air quality - Instrumentale odour measure using IOMS (Instrumental Odour Monitoring Systems)
UNI EN 15259:2008 Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
UNI EN 17389:2020 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors
UNI EN 15267-3:2024 Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
UNI 11761:2019 Emissions and air quality - Odour determination using IOMS (Instrumental Odour Monitoring Systems) and their qualification
UNI EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
UNI EN 15267-4:2024 Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources

British Standards Institution (BSI)

BS PD CEN/TS 17198:2018 Stationary source emissions. Predictive Emission Monitoring Systems (PEMS). Applicability, execution and quality assurance
BS EN 17389:2020 Stationary source emissions. Quality assurance and quality control procedures for automated dust arrestment plant monitors
BS EN ISO 11771:2010 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
BS EN ISO 11771:2011 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
19/30386014 DC BS EN 17389. Stationary source emissions. Quality assurance and quality control procedures for automated dust arrestment plant monitors
BS ISO 11042-2:1996 Gas turbines. Exhaust gas emission. Automated emission monitoring
08/30161739 DC BS EN ISO 11771. Air quality. Determination of time-averaged mass emissions and emission factors. General approach
BS EN 15267-3:2023 Air quality. Assessment of air quality monitoring equipment. Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
BS ISO 10155:1995(1999) Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications
BS EN 15267-3:2007 Air quality - Certification of automated measuring systems - Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
BS EN 15267-3:2008 Air quality - Certification of automated measuring systems - Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
BS ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
PD CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability@ execution and quality assurance
BS ISO 11042-2:1996(2000) Gas turbines — Exhaust gas emission — Part 2 : Automated emission monitoring
BS EN 15267-4:2023 Air quality. Assessment of air quality monitoring equipment. Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources
BS ISO 8178-1:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement systems of gaseous and particulate emissions
22/30454084 DC BS EN 15267-3. Air quality. Assessment of air quality monitoring equipment. - Part 3. Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
BS ISO 20181:2023 Stationary source emissions. Quality assurance of automated measuring systems

European Committee for Standardization (CEN)

CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance
EN ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
EN 15267-3:2023 Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
EN 15267-4:2023 Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources
EN 14181:2014 Stationary source emissions - Quality assurance of automated measuring systems

Standards Norway

SN-CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance
NS-EN 17389:2020 Stationary source emissions — Quality assurance and quality control procedures for automated dust arrestment plant monitors
NS-EN ISO 11771:2010 Air quality — Determination of time-averaged mass emissions and emission factors — General approach (ISO 11771:2010)
NS-EN 15267-3:2007 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
NS 4863:1985 Air quality - Emission measurements - Concentration of total dust in stacks and ducts
NS-EN 14181:2014 Stationary source emissions — Quality assurance of automated measuring systems
NS-EN 15267-4:2023 Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources

Association Francaise de Normalisation

XP X43-420:2011 Emissions from stationary sources - Quality assurance of PEMS (Predictive Atmospheric Emissions Monitoring System)
NF X43-110*NF EN 17389:2020 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors
NF X43-312*NF EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
NF EN ISO 11771:2011 Air quality - Determination of time average mass emissions and emission factors - General approach
NF EN 17389:2020 Emissions from stationary sources - Quality assurance and quality control procedures applicable to automatic analyzers for monitoring dust collection systems
NF EN 15267-3:2023 Air quality - Assessment of air quality monitoring equipment - Part 3 : performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
NF X43-550:1999 Air quality - Emissions from fixed sources - Expression of results from measurements of emissions from industrial installations
XP X43-362:2004 Stationary source emissions - Qualification and monitoring of AMS
NF E37-504-2*NF ISO 11042-2:2016 Gaz turbines - Exhaust gas emission - Part 2 : automated emission monitoring
NF E37-211-2:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.
NF X43-700-3*NF EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3 : performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
NF E37-211-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions.
NF X43-360:2004 Stationary source emissions - Quality assurance of automated measuring systems.
NF EN 14181:2014 Emission from stationary sources - Quality assurance of automatic measurement systems

Danish Standards Foundation

DANSK DS/CEN/TS 17198:2018 Stationary source emissions – Predictive Emission Monitoring Systems (PEMS) – Applicability, execution and quality assurance
DANSK DS/EN 17389:2020 Stationary source emissions – Quality assurance and quality control procedures for automated dust arrestment plant monitors
DANSK DS/EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
DS/ISO 10155/Corr.1:2002 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DANSK DS/ISO 10155:1996 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DS/ISO 10155:1996 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DS/EN ISO 11771:2011 Air quality – Determination of time-averaged mass emissions and emission factors – General approach
DANSK DS/EN 14181:2014 Stationary source emissions - Quality assurance of automated measuring systems
DANSK DS/ISO 20181:2023 Stationary source emissions – Quality assurance of automated measuring systems
DS/EN 14181:2004 Stationary source emissions - Quality assurance of automated measuring systems

German Institute for Standardization

DIN CEN/TS 17198:2018-10*DIN SPEC 33979:2018-10 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance; German version CEN/TS 17198:2018
DIN 25465:1999 Monitoring and assessment of the discharge of radioactive substances in liquid effluents
DIN CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance; German version CEN/TS 17198:2018
DIN EN 17389:2020 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors
DIN EN 17389:2020-07 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors; German version EN 17389:2020
DIN 25465:1999-10 Monitoring and assessment of the discharge of radioactive substances in liquid effluents
DIN EN 17389 E:2019-05 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors
DIN EN ISO 11771:2011-04 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010); German version EN ISO 11771:2010
DIN EN 17389 E:2019 Draft Document - Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors; German and English version prEN 17389:2019
DIN EN 15267-3:2024 Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
DIN EN 15267-3:2022-08 Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources; German and English version prEN 1...
DIN EN 15267-3:2024-09 Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
DIN EN ISO 11771 E:2008-04 General method for determination of air quality time-averaged mass emissions and emission factors (draft)
DIN EN 15267-3 E:2005-08 Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
DIN EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources; English version of DIN EN 15267-3:2008-03
DIN EN 15267-4:2024-09 Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources
DIN EN 15267-4:2022-08 Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources; German and English version prEN 152...
DIN EN 15267-3 E:2022-08 Draft Document - Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources; German and Engli...
DIN EN 15267-4:2024 Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources
DIN EN 14181:2004-09 Stationary source emissions - Quality assurance of automated measuring systems
DIN EN 14181:2015-02 Stationary source emissions - Quality assurance of automated measuring systems; German version EN 14181:2014

Association of German Mechanical Engineers

VDI 4204 Blatt 1-2022 Evaluation of emission measurements Determination of characteristic quantities for continuous emission monitoring
VDI 4204 BLATT 1-2018 Auswertung von Emissionsmessungen - Ermittlung von Kenngroessen bei der kontinuierlichen Emissionsueberwachung
VDI 4204 Blatt 1-2022 Evaluation of emission measurements Determination of characteristic quantities for continuous emission monitoring
VDI 4206 BLATT 2-2013 Performance criteria and test procedures for measuring devices for monitoring emissions at small firing installations - Measuring devices for the determination of particulate emissions
VDI 4202 BLATT 3-2019 Automatic measuring devices for monitoring air quality — suitability testing, notification of suitability and certification of measuring devices for point-based measurement of the mass concentration of particulate emissions
VDI 4280 BLATT 3-2003 Planning of immission measurements — measurement strategies for determining air quality characteristics in the vicinity of stationary emission sources
VDI 4280 Blatt 3-2001 Planning of ambient air quality measurements - Measurement strategies for the determination of air quality characteristics in the vicinity of stationary emission sources
VDI 4206 Blatt 1-2008 Performance criteria and test procedures for measuring devices used for monitoring emissions at small furnacers - Measuring devices for the measurement of gaseous emissions and waste gas parameters
VDI 4206 Blatt-1 E:2020-05 Performance standards and test procedures for measuring emission monitoring equipment for small combustion installations - Measurement equipment for gaseous emissions and flue gas parameters
VDI 4206 BLATT 1-2010 Minimum requirements and test plans for measuring instruments for monitoring emissions from small combustion plants — Measuring instruments for measuring gaseous emissions and exhaust gas parameters
VDI 4206 Blatt 2-2011 Performance criteria and test procedures for measuring devices for monitoring emissions at small firing installations - Measuring devices for the determination of particulate emissions
VDI-EE 3952:2024 Stationary source emissions – Predictive emission monitoring systems (PEMS) – Basic aspects, performance testing, certification, and application
VDI 4206 Blatt 2-2010 Performance criteria and test procedures for measuring devices for emission monitoring at small furnaces - Measuring devices for the determination of particulate emissions
VDI 4206 BLATT 2-2015 Minimum requirements and test plans for measuring instruments for monitoring emissions from small combustion plants — Measuring instruments for determining particulate emissions
VDI 4206 BLATT 2-2015 Minimum requirements and test plans for measuring instruments for monitoring emissions from small combustion plants — Measuring instruments for determining particulate emissions
VDI 4208 Blatt 1-2012 Anforderungen an Stellen bei der Ueberwachung der Emissionen an Kleinfeuerungsanlagen - Stellen fuer die Ermittlung der Emissionen
VDI 4208 BLATT 1-2013 Requirements for bodies monitoring emissions from small combustion plants — Bodies for determining emissions
VDI 4206 BLATT 1-2010 Minimum requirements and test plans for measuring instruments for monitoring emissions from small combustion plants — Measuring instruments for measuring gaseous emissions and exhaust gas parameters
VDI 4257 Blatt 1-2010 Bioaerosols and biological agents - Emission measurements - Planning and performing emission measurements
VDI 4206 Blatt 1 Berichtigung-2022 Performance criteria and test procedures for measuring devices for monitoring emissions at small firing installations – Measuring devices for the determination of gaseous emissions and flue gas parameters
VDI 4257 BLATT 1-2013 Bioaerosols and biological agents — Measuring emissions — Planning and carrying out emission measurements
VDI 4257 BLATT 1-2013 Bioaerosols and biological agents — Measuring emissions — Planning and carrying out emission measurements

GOST

GOST R 71515-2024 Automatic emission and discharge control systems. Automatic control systems for pollutant discharge. Classification
GOST R 71512-2024 Automatic emission and discharge control systems. Automatic control systems for pollutant emissions. Sampling requirements
GOST R 71508-2024 Automatic emission and discharge control systems. Automatic control systems for pollutant emissions. Classification
GOST R 71510-2024 Automatic emission and discharge control systems. Automatic control systems for pollutant emissions. Gas analysis subsystem. Technical requirements
GOST R 71519-2024 Automatic emission and discharge control systems. Automatic control systems for pollutant discharges. Sampling requirements

PL-PKN

PN-EN 17389-2020-11 E Stationary source emissions -- Quality assurance and quality control procedures for automated dust arrestment plant monitors

Gosstandart of Russia

GOST R ISO 11771-2016 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
GOST R 70805-2023 Automatic measuring systems for control of pollutant emissions. Methodology for calculating the mass emission

Swiss Association for Standardization (SNV)

SN EN 17389-2020 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors

Swedish Institute for Standards

SS-EN 17389:2020 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors
SS-EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
SS-EN 15267-3:2024 Air quality — Assessment of air quality monitoring equipment — Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
SS-ISO 10155:1995 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
SS-EN 15267-4:2024 Air quality — Assessment of air quality monitoring equipment — Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources

Spanish Association for Standardization (UNE)

UNE-EN 17389:2021 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors
UNE 77219:1998 ERRATUM:2009 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications.
UNE 77219:1998 STACIONARY SOURCE EMISSIONS. AUTOMATED MONITORING OF MASS CONCENTRATIONS OF PARTICLES. PERFORMANCE CHARACTERISTICS, TEST METHODS AND SPECIFICATIONS.
UNE-EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
UNE 77209:1989 GASEOUS EMISSIONS. REQUERIMENTS OF CONTINUOUS MONITORING FOR THE MEASUREMENT OF OPACITY
UNE-EN 15267-3:2024 Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
AENOR UNE-EN 16516:2018 Construction products: Evaluation of the emission of hazardous substances. Determination of emissions to indoor air.
UNE-EN 14181:2005 Stationary source emissions - Quality assurance of automated measuring systems
UNE-EN 14181:2015 Stationary source emissions - Quality assurance of automated measuring systems

Austrian Standards

ONORM M 9410-1991 Air quality; measuring technique; definitions and characteristics for continuous emission and ambient air monitoring instruments
ONORM M 9415 Teil.2-1991 Measuring technique — Measurement ofthe emission of substances into the atmosphere — Regulations for measuring

Korean Agency for Technology and Standards (KATS)

KS I ISO 11771-2013(2018) Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
KS I ISO 11771:2013 Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
KS I ISO 11771-2023 Air quality — Determination of time-averaged mass emissions and emission factors — General approach
KS I ISO 10155-2023 Stationary source emissions — Automated monitoring of mass concentrations of particles ― Performance characteristics, test methods and specifications
KS I ISO 10155-2008(2018) Stationary source emissions－Automated monitoring of mass concentrations of particles－Performance characteristics, test methods and specifications
KS I ISO 10849:2008 Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
KS I ISO 10155:2008 Stationary source emissions-Automated monitoring of mass concentrations of particles-Performance characteristics, test methods and specifications
KS B ISO 11042-2-2015(2020) Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS B ISO 11042-2-2020 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS B ISO 11042-2:2015 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS B ISO 11042-2:2005 Gas turbines-Exhaust gas emission-Part 2:Automated emission monitoring

US-FCR

FCR 40 CFR PART 75-2013 CONTINUOUS EMISSION MONITORING
FCR 40 CFR PART 75-2014 CONTINUOUS EMISSION MONITORING

GB-REG

REG 40 CFR PART 75-2011 CONTINUOUS EMISSION MONITORING

GCC Standardization Organization

GSO ISO 10396:2009 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently installed monitoring systems
GSO ISO 11771:2015 Air quality -- Determination of time-averaged mass emissions and emission factors -- General approach
GSO ISO 11042-2:2015 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring
OS GSO ISO/TS 20177:2024 Vacuum technology — Vacuum gauges — Procedures to measure and report outgassing rates
GSO ISO 5660-1:2015 Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)

U.S. Environmental Protection Agency (U.S. EPA)

EPA 40 CFR PART 75-2010 CONTINUOUS EMISSION MONITORING

International Organization for Standardization (ISO)

ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
ISO 10155 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
ISO 10155:1995 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
ISO 10849:1996 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Performance characteristics of automated measuring systems
ISO 11042-2:1996 Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
ISO 20181:2023 Stationary source emissions — Quality assurance of automated measuring systems

Society of Automotive Engineers (SAE)

SAE R-237-1999 Emissions and Air Quality

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 11771:2017 Air quality -- Determination of time-averaged mass emissions and emission factors -- General approach
BH GSO ISO 11042-2:2017 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 11771:2015 Air quality -- Determination of time-averaged mass emissions and emission factors -- General approach

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 6501-1999 Stationary source emissions.Determination of the mass concentration of nitrogen oxides.Performance characteristics of automated measuring systems
TCVN 5976-1995 Stationary source emission.Determination of the mass concentration of sulfur dioxide.Performance characteristics of automated measuring methods
TCVN 6192-2010 Stationary source emmissions.Sampling for the automated determination of gas emission concentrations for permanently.installed monitoring systems

American Petroleum Institute (API)

API 4103-1971 VEHICLE EMISSIONS SURVEILLANCE STUDY

Lithuanian Standards Office

LST ISO 10155:2001 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications
LST EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
LST EN 14181-2004 Stationary source emissions - Quality assurance of automated measuring systems

CZ-CSN

CSN IEC 761-2:1992 Equipment for continuously monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosol effluent monitors
CSN IEC 761-3:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 3: Specific requirements for noble gas effluent monitors
CSN IEC 761-6:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 6: Specific requirements for transuranic aerosol effluent monitors

RO-ASRO

STAS SR CEI 761-2-1996 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 2: Specific requirements for aerosol effluent monitors.

Japanese Industrial Standards Committee (JISC)

JIS B 8043-2:2000 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring
JIS B 8008-2:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions

SE-SIS

SIS SS IEC 579:1981 Nuclear instrumentation - Radioactive aerosol contamination meters and monitors

Others: Quality Monitoring and Emissions,Quality Monitoring Emissions,Quality Standards and Emissions