Check standard gas

Check standard gas, Total:238 items.

The international standard classification for "Check standard gas" includes: Management of human resources , Railway engineering in general , Road engineering in general .

The Chinese standard classification for "Check standard gas" includes: Medical science , Basic standards and general methods , Standardization and quality management , Hygiene, safety and labor protection , Highway protection and maintenance .

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 4064-2021 Jiangsu Province Urban Gas Safety Inspection Standards

Henan Provincial Standard of the People's Republic of China

DB41/T 1522-2018 Technical specification for inspection and detection of flammable and toxic gas alarms

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 16408.3-1996 Appraisal standard of physical examination for recruitment of civil aviation airman trainees
GB/T 50493-2019 Standard for design of combustible gas and toxic gas detection and alarm for petrochemical industry
GB/T 16408.4-1996 Appraisal standard of physical examination for civil aviation flight attendants
GB/T 16904.1-2006 Checking of rolling stock clearance for Standard gauge railways - Part 1: Methods for inspecting
GB 16408.1-1996 Appraisal standard of physical examination for civil aviation aircrew
GB 16408.2-1996 Appraisal standard of physical examination for civil aviation air traffic controllers
GB/T 16904.1-2006(英文版) Checking of rolling stock clearance for standard gauge railways—Part 1:Methods for inspecting

Taiwan Provincial Standard of the People's Republic of China

CNS 12945-1991 Testing Standard for Gas Cartridge Used for Game Gun
CNS 8916-1988 Inspection of Amusements (Water Shoot)
CNS 8915-1988 Inspection Standard of Amusements (Ferris Wheel)
CNS 9335-1988 Inspection of Amusement ( Merry Go Round )
CNS 13433-1994 Inspection Standard for Rolling Fire Doors
CNS 5960-1988 Inspection of Amusement (Coaster)
CNS 13433-2007 Inspection standard of rolling fire doors
CNS 12472-1988 Inspection of Amusements (Airplane Tower)

Professional Standard - Civil Aviation

MH 7007.3-1995 Appraisal standard of physical examination for airmen trainees of civil aviation
MH 7007.1-1995 Appraisal standard of physical examination for civil aviation aircrew

Fujian Provincial Standard of the People's Republic of China

DB35/T 2013-2021 Enterprise Standard Supervision and Inspection Guidelines

Group Standards of the People's Republic of China

T/ZS 0015-2018 Public health standardization pilot standard implementation inspection specification
T/YKJSX 0002-2020 Standardized the Implementation of the Standard Supervision and Inspection System
T/JSTERA 33-2021 Quality inspection standard for expressway construction
T/CIET 371-2024 Standardization of house Inspection and testing

Hebei Provincial Standard of the People's Republic of China

DB13/T 2518-2017 Specifications for inspection and testing of combustible gas and toxic gas detection and alarm systems in industrial enterprises

未注明发布机构

DIN CEN/TS 17626:2022 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for human specimen - Isolated microbiome DNA

Professional Standard - Construction Industry

JGJ 59-1999（条文说明） Standard for safety inspection of building construction (explanation)
JGJ 59-1988 Standard for safety inspection of building construction (explanation)
JGJ 59-1999 Standard of construction safety inspection
JGJ 59-2011 Standard for construction safety inspection

Professional Standard - Agriculture

GB 4751-1984 Quality inspection and acceptance criteria for rural household hydraulic biogas digesters
231药典四部-2015 3300 Microbiological inspection method 3301 Mycoplasma inspection method
273药典三部-2020 Microbiological Inspection Method 3301 Mycoplasma Inspection Method
222药典四部-2020 3300 Microbiological inspection method 3301 Mycoplasma inspection method

Guangdong Provincial Standard of the People's Republic of China

DB4451/T 3-2022 Standard supervision and inspection work specification

Professional Standard - Ocean

HY/T 244-2018 Standard system for oceanographic investigation

Hubei Provincial Standard of the People's Republic of China

DB42/T 560-2009 Standard of the safety inspection and assessment for bottled LPG delivered station

National Metrological Verification Regulations of the People's Republic of China

JJG(机械) 90-1992 Verification Regulations for Standard Substances of Binary Gas Mixtures

Professional Standard - Traffic

JTJ 075-1994 Quality Inspection and Evaluation Standards for Highway Maintenance
JTJ 075-1994（条文说明） Highway maintenance quality inspection and evaluation standards

Professional Standard - Urban Construction

CJJ/T 275-2018 Municipal engineering construction safety inspection standards

Anhui Provincial Standard of the People's Republic of China

DB34/T 5037-2022 Construction safety inspection standards for ship lock engineering
DB34/T 978-2020 Construction safety inspection standards for high-piled wharves

Professional Standard - Petrochemical Industry

SH/T 3206-2019 Design safety checklist for petrochemical engineering

United States Navy

NAVY MS15430-1953 MASK, GAS, ND MARK V INSPECTION STANDARD

BE-NBN

NBN T 97-108-1982 Gas analysis - Checking of calibration gas mixtures by a comparison method

American Society for Testing and Materials (ASTM)

ASTM E3392-24 Standard Guide for Forensic Physical Fit Examination
ASTM E433-71(2013) Standard Reference Photographs for Liquid Penetrant Inspection
ASTM E433-71(2008) Standard Reference Photographs for Liquid Penetrant Inspection
ASTM E1000-16 Standard Guide for Radioscopy
ASTM E2916-13 Standard Terminology for Digital and Multimedia Evidence Examination
ASTM E2062-11(2017) Standard Guide for PDD Examination Standards of Practice
ASTM F584-87(2005) Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
ASTM F584-87(1999) Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
ASTM E2062-10a Standard Guide for PDD Examination Standards of Practice
ASTM E2062-10 Standard Guide for PDD Examination Standards of Practice
ASTM E1161-09 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
ASTM F1236-96(2007) Standard Guide for Visual Inspection of Electrical Protective Rubber Products
ASTM F1236-96e1 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
ASTM F1236-24 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
ASTM F1236-14 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
ASTM E709-08 Standard Guide for Magnetic Particle Testing
ASTM F1236-15 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
ASTM E165/E165M-12 Standard Practice for Liquid Penetrant Examination for General Industry
ASTM D6237-09(2015) Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
ASTM E94-04 Standard Guide for Radiographic Examination
ASTM E1255-96(2002) Standard Practice for Radioscopy
ASTM E1255-96 Standard Practice for Radioscopy
ASTM F893-87(2000) Standard Guide for Inspection of Amusement Rides and Devices
ASTM E1734-16a Standard Practice for Radioscopic Examination of Castings
ASTM F893-87(1995) Standard Guide for Inspection of Amusement Rides and Devices
ASTM E1930/E1930M-12 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
ASTM D3578-01ae1 Standard Specification for Rubber Examination Gloves
ASTM E1843-16 Standard Guide for Sexual Assault Investigation, Examination, and Evidence Collection
ASTM D3578-01 Standard Specification for Rubber Examination Gloves
ASTM D3578-05(2010) Standard Specification for Rubber Examination Gloves
ASTM D3578-01a Standard Specification for Rubber Examination Gloves
ASTM D3578-05 Standard Specification for Rubber Examination Gloves
ASTM E1742/E1742M-18 Standard Practice for Radiographic Examination
ASTM D3578-00a Standard Specification for Rubber Examination Gloves
ASTM D3578-01ae2 Standard Specification for Rubber Examination Gloves
ASTM E1742-08 Standard Practice for Radiographic Examination
ASTM E1359-09 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
ASTM E1359-02 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
ASTM F584-06 Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
ASTM F584-06e1 Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
ASTM E1934-99a(2024) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
ASTM E1419/E1419M-15a(2020) Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
ASTM E2680-09e1 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
ASTM D1524-15(2022) Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field
ASTM E2680-09(2015) Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
ASTM E2331-04 Standard Guide for Examination of Altered Documents
ASTM E3143-18b(2023) Standard Practice for Performing Cryo-Transmission Electron Microscopy of Liposomes
ASTM E2680-23 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
ASTM E2680-09 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
ASTM E2680-16 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
ASTM E2386-04(2011) Standard Guide for the Conduct of PDD Screening Examinations
ASTM E1934-99a(2014) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
ASTM E1255-23 Standard Practice for Radioscopy
ASTM D6319-19(2023) Standard Specification for Nitrile Examination Gloves for Medical Application
ASTM E2386-04 Standard Guide for the Conduct of PDD Screening Examinations
ASTM E1934-99a(2018) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
ASTM D5495-03(2011) Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
ASTM D3578-05(2015) Standard Specification for Rubber Examination Gloves
ASTM E1934-99a Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography

International Organization for Standardization (ISO)

ISO 6711:1981 Gas analysis — Checking of calibration gas mixtures by a comparison method
ISO 6143:2001 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
ISO/DIS 6143:2023 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ISO/CD 6143 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ISO/TR 18267:2013 Timber structures - Review of design standards

SCC

UNE 77241:2001 Gas analysis. Cheking of calibration gas mixtures by a comparision method.
AWPA M19-97 Standard for Destination Inspections
AWPA M19-03 Standard for Destination Inspections
AWPA M19-11 Standard for Destination Inspections
AWPA M19-17(R2023) Standard for Destination Inspections
UNE 77247:2003 Gas analysis -- Comparison methods for determining and checking the composition of calibration gas mixtures.
BS ISO 6143:2001 Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
DANSK DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
MIL MIL-STD-1411C-2020 Inspection and Maintenance of Compressed Gas Cylinders
MIL MIL-STD-1411B-2010 Inspection and Maintenance of Compressed Gas Cylinders
NS-EN ISO 6143:2006 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
SN-CEN/TS 17626:2021 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for human specimen - Isolated microbiome DNA
VDI 4321-2023 Diffuse emissions — Optical gas detection for plant inspection — Biogas plants
DANSK DS/CEN/TS 17626:2021 Molecular in vitro diagnostic examinations – Specifications for pre-examination processes for human specimen – Isolated microbiome DNA
AS CB4:1963 SAA Compressed Gas Cylinders Code. Australian standard rules for the filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed and liquefiable gases
AS CB4:1969 SAA compressed gas cylinders code. Australian standard rules for the filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases
MIL MIL-STD-1411A-2002 INSPECTION AND MAINTENANCE OF COMPRESSED GAS CYLINDERS (SUPERSEDING MIL-STD-1411)
DIN EN ISO 6143 E:2023 Draft Document - Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO/DIS 6143:2023); German and English version prEN ISO 6143:2023
DANSK DS/EN 13365:2002 Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling
AASHTO R 61-2012(2020) Standard Practice for Establishing Requirements for Equipment Calibrations, Standardizations, and Checks
CSA A257 SERIES-2024 Standards for concrete pipe and manhole sections
DANSK DS/EN 1920:2000 Transportable gas cylinders – Cylinders for compressed gases (excluding acetylene) – Inspection at time of filling
DANSK DS/EN 14189:2003 Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders
NS-EN 1920:2000 Transportable gas cylinders - Cylinders for compressed gases (excluding acetylene) - Inspection at time of filling

US-FCR

FCR COE RPMAS 66250-1977 INSPECTION OF GAS LINE WELDING
FCR COE RPMAS 66240-1977 INSPECTION OF GAS LINE VALVES
FCR COE RPMAS 66220-1977 INSPECTION OF GAS LINE ACCESSORIES
FCR COE RPMAS 66230-1977 GAS LINE INSPECTION INSPECTION OF GAS METERS
FCR AF M11-225-2003 UNITED STATES STANDARD FLIGHT INSPECTION MANUAL

GSO

GSO OIML R41:2007 Standard burettes for verification officers
GSO OIML R40:2005 STANDARD GRADUATED PIPETTES FOR VERIFICATION OFFICERS
BH GSO ISO 6143:2016 Gas analysis -- Comparison methods for determining and checking the composition of calibration gas mixtures
GSO OIML R24:2002 STANDARD ONE METRE BAR FOR VERIFICATION OFFICERS
GSO ISO 14064-3:2015 Greenhouse gases -- Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions
GSO ASTM D3578:2021 Standard Specification for Rubber Examination Gloves
BH GSO ASTM D3578:2022 Standard Specification for Rubber Examination Gloves
GSO ISO 10099:2015 Pneumatic fluid power -- Cylinders -- Final examination and acceptance criteria
OS GSO ISO 10099:2015 Pneumatic fluid power -- Cylinders -- Final examination and acceptance criteria

Compressed Gas Association (U.S.)

CGA C-6.1-2013 STANDARES FOR VISUAL INSPECTION OF HIGH PRESSURE ALUMINUM COMPRESSED GAS CYLINDERS
CGA C-6-2007 STANDARDS FOR VISUAL INSPECTION OF STEEL COMPRESSED GAS CYLINDERS TENTH EDITION
CGA C-6.1-2006 STANDARES FOR VISUAL INSPECTION OF HIGH PRESSURE ALUMINUM COMPRESSED GAS CYLINDERS FIFTH EDITION

Institute of Electrical and Electronics Engineers (IEEE)

NFPA (Fire) 73 NFPA 73: Standard for Electrical Inspections for Existing Dwellings, 2021 Edition
IEEE/ANSI N42.15-1997 American National Standard Check Sources for and Verification of Liquid-Scintillation Counting Systems
Electrical Safety Manual for Power and Communications Industries [Adapted from the 2017 IEEE NESC(R) Electrical Safety Manual for Power and Communications Industries [Adapted from the 2017 IEEE NESC(R) Handbook Premier Edition] - Chinese Edition
NFPA (Fire) 915 Standard for Remote Inspections and Tests, 2024 Edition

HU-MSZT

MSZ 6369/14-1980 Flour Inspection Method to Check Gas Production of Noodles and His Gas Retention
MSZ 10800-1966 Measurement of standard air ring inspection. is equal to standard atmospheric pressure and relative humidity
MSZ 2504/1-1980 Metallurgical industry coal slag inspection standards
MSZ 12000/3.lap-1968 Laboratory testing. General inspection standards for hard coal
MSZ 6575/7.lap-1961 Mirror standard galvanic layer inspection
MSZ 21853/1-1976 Gas pollutant source detection. common standard
MSZ 6353/3-1981 Farming inspection and growing grain. Herbal Standards
MSZ 2708/3-1987 Condensed milk and milk powder, chemical standardized examination

Danish Standards Foundation

DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
DS 727.0:1956 Valves for steel cylinders for gases. Outlet connections. Survey

Korean Agency for Technology and Standards (KATS)

KS I ISO 6143-2020 Gas analysis－Comparison methods for determining and checking the composition of calibration gas mixtures
KS I ISO 6143-2015(2020) Gas analysis－Comparison methods for determining and checking the composition of calibration gas mixtures
KS I ISO 6143:2008 Gas analysis-Comparison methods for determining and checking the composition of calibration gas mixtures
KS I ISO 6143:2015 Gas analysis－Comparison methods for determining and checking the composition of calibration gas mixtures
KS F 2815-2001 Inspection standard of smoke exhaust equipment
KS K 1300-2011 Standard for inspection of synthetic fiber filament yarn
KS K 1300-1981 Standard for inspection of synthetic fiber filament yarn
KS B ISO 10463-2013 Cylinders for permanent gases－Inspection at time of filling
KS Q 1001-2005 Single sampling inspection plums having desired operationcharacteristics by variables(Standard deviation known)
KS B ISO 10099-2013 Pneumatic fluid power－Cylinders－Final examination and acceptance criteria

British Standards Institution (BSI)

BS EN ISO 6143:2006(2007) Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
23/30464018 DC BS EN ISO 6143. Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
BS EN 14189:2003 Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders

German Institute for Standardization

DIN EN ISO 6143:2006-11 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006
DIN EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); English version of DIN EN ISO 6143:2006-11
DIN EN ISO 6143:2023 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO/DIS 6143:2023); German and English version prEN ISO 6143:2023
DIN CEN/TS 17626:2022-01 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for human specimen - Isolated microbiome DNA; German version CEN/TS 17626:2021

Association Francaise de Normalisation

NF X20-207*NF EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
NF A09-461:2002 Non-destructive testing - Leak test - Calibration of gaseous reference leaks.
NF E49-005*NF ISO 10099:2001 Pneumatic fluid power - Cylinders - Final examination and acceptance criteria.
NF EN 13365:2002 Transportable gas cylinders - Cylinder frames for permanent and liquefied gases (except acetylene) - Inspection at the time of filling
NF EN 13365/A1:2005 Transportable gas cylinders - Cylinder frames for permanent and liquefied gases (except acetylene) - Inspection at the time of filling
NF E29-781:2000 Transportable gas cylinders - Cylinders for compressed gases (excluding acetylene) - Inspection at time of filling.

Malaysia Standards

MS 1474-1999 Cylinders for permanent gases - inspection at time of filling

GOSTR

PNST 483-2020 Petroleum and natural gas industries. Subsea production systems. Liquid penetrant examination. Standard methods
GOST 12.2.021-1976 Occupational safety standards system. Explosion-proof electrical equipment. Order of checking of technical documentation, testing and certification procedures

TH-TISI

TIS 1056-1991 Standard for rubber examination gloves

American National Standards Institute （ANSI)

CGA C-6-OSHA Cited by OSHA, 4th edition "Standards for Visual Inspection of Compressed Gas Cylinders"
ANSI/IEEE 1028:2008 Standard for Software Reviews and Audits
ANSI/ASSE Series16000-2012 Professional Qualifications Standard for the Plumbing Inspector
ANSI/ASTM E329:2021 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

CZ-CSN

CSN 38 5553-1988 Checking of calibration gas mixture proportion by a comparative method

American Society of Mechanical Engineers (ASME)

ASME SEC V B SE-165-2001 Standard Test Method for Liquid Penetrant Examination ASTM E165-95
ASME SEC XI D1 ART IWA-3000-2003 Article IWA-3000 Standards for Examination Evaluation
ASME SEC V B SA-745/SA-745M-2001 Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings ASTM A745/A745M-94
ASME SEC V B SE-1316-2001 Standard Terminology for Nondestructive Examinations ASTM E1316-99
ASME QEI-1-2010 Standard for the Qualification of Elevator Inspectors

National Fire Protection Association (NFPA)

NFPA 73-2016 Standard for Electrical Inspections for Existing Dwellings (Effective Date: 06/15/2015)
NFPA 73-2021 Standard for Electrical Inspections for Existing Dwellings (Effective Date: 9/19/2019)

Society of Automotive Engineers (SAE)

SAE ARP4087D-2023 Wing Inspection Lights - Design Criteria
SAE ARP4087-1988 WING INSPECTION LIGHTS - DESIGN CRITERIA
SAE ARP4087C-2011 Wing Inspection Lights - Design Criteria
SAE ARP4087C-2018 Wing Inspection Lights – Design Criteria
SAE ARP6225-2014 Aircraft Tire Inspection - In-Service Removal Criteria
SAE ARP6225B-2023 Aircraft Tire Inspection - In-Service Removal Criteria

National Aeronautics and Space Administration (NASA)

NASA-STD-2202-1993 SOFTWARE FORMAL INSPECTIONS STANDARD

SAE - SAE International

SAE ARP4087A-1996 Wing Inspection Lights - Design Criteria
SAE ARP6225A-2019 Aircraft Tire Inspection - In-Service Removal Criteria

Lithuanian Standards Office

LST EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)

(U.S.) Ford Automotive Standards

FORD RECORD OF REVISIONS-2008 WWSS FASTENER STANDARDS CHECKLIST

Natural Gas Processor's Association (NGPA)

GPA FACILITY SAFETY-1998 Gas Processing Facility Safety Inspection Checklist
GPA GAS-1987 Gas Processing Facility Safety Inspection Checklist; 1987

AENOR

UNE-EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)

European Committee for Standardization (CEN)

CEN/TS 17626:2021 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for human specimen - Isolated microbiome DNA
prEN ISO 6143 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO/DIS 6143:2023)
EN 13192:2001 Non destructive testing - Leak testing - Calibration of reference leaks for gases

AT-ON

OENORM H 7510-2-2021 Checking of heating systems - Part 2: Basic check of firing systems for liquid and gaseous fuels

Underwriters Laboratories (UL)

UL 1484 BULLETIN-2006 UL Standard for Safety Residential Gas Detectors
UL 1484 BULLETIN-2000 UL Standard for Safety Residential Gas Detectors

RU-GOST R

GOST R 55999-2014 In-line inspection of gas pipelines. General requirements

Japanese Industrial Standards Committee (JISC)

JIS A 1714:1995 Inspection standard of amusements (Ferris wheel)
JIS Z 9009:1962 Sequential sampling inspection plans having desired operating characteristics by attributes
JIS A 1716:1995 Inspection standard of amusements (Water shoot)
JIS A 1313:1995 Inspection standard of rolling fire doors

GB-REG

REG 49 CFR PART 230-2011 STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS

US-DOT

DOT 49 CFR PART 230-2010 STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS

VDI - Verein Deutscher Ingenieure

VDI 6022 Blatt 2-2006 Hygienic standards for ventilation and air-conditioning systems - Measurement procedures and examinations in hygiene check-ups and hygiene inspections

SE-SIS

MNC 102-1992 Inspection and testing — Basic standards
SIS SS 421 08 81-1991 Electrical installations in explosive gas atmospheres -Inspection and maintenance

IPC - Association Connecting Electronics Industries

IPC OI-645 CD-1993 Standard for Visual Optical Inspection Aids

International Federation of Trucks and Engines

NAVISTAR ESP-A-0.201-2016 VOID - Page Checking List - Engineering Standard Parts

The American Road & Transportation Builders Association

AASHTO R 61-2012(R2020) Standard Practice for Establishing Requirements for Equipment Calibrations, Standardizations, and Checks

AASHTO - American Association of State Highway and Transportation Officials

R 61-2012 Standard Practice for Establishing Requirements for Equipment Calibrations@ Standardizations@ and Checks