hb 8502

hb 8502, Total:209 items.

The international standard classification for "hb 8502" includes: .

The Chinese standard classification for "hb 8502" includes: Cutters , Cutting tools .

Professional Standard - Aviation

HB 6917-1994 Slot milling cutter for four-tooth roughing end mill for HB 6904~6905-94 HB 6907~6908-94.D=40~63mm
HB 2394-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=1~5mm
HB 6940-1994 Slot Cutter for Four-gear Bulb End-milling Cutter, Aplicable to HB 6930-94 and HB 6933-94 D=45~80mm
HB 2405-1977 HB 243-70 AG, BG thread plug gauge d=6~30mm
HB 2381-1977 HB 241-75, HB 242-70 thread rolling wheels for ordinary and ordinary clearance threads d=2~33mm t=0.35~2mm
HB 2362-1977 Machine and hand taps d=8~11mm for processing light alloy non-through hole HB 241-75 thread
HB 2398-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass TY d=1~5mm
HB 2423-1978 Hand tap for processing HB 243-70 AG interference thread d=3~5mm
HB 2396-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=52~100mm
HB 2374-1977 Machine and hand taps for processing heat-resistant steel non-through holes HB 241-75 threads d=8~11mm
HB 2406-1977 HB 243-70 AG, BG thread group plug gauge d=3~5mm
HB 6920-1994 Six-tooth rough machining end mill slot milling cutter sample and proofreading sample testing HB 6919-94 slot milling cutter
HB 2395-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=6~48mm
HB 2368-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=1~3.5mm
HB 6923-1994 Two-tooth rough machining end mill with back cutter for HB 6910~94 HB 6913-94.D=56~63mm
HB 2415-1977 HB 243-70 threaded comb-shaped caliper with meter fixed measuring head d=3~30mm
HB 6925-1994 HB 6911~6912-94 HB 6914~6915-94.D=63~80mm for slot milling cutter for three-tooth rough machining end mill
HB 7242-1995 General specification for aircraft engine installation vehicle HB
HB 6937-1994 Template and Proofreading Template for Double-gear Bulb End-milling Cutter Slot Cutter - Slot Cutter Inspection of HB 6936-94
HB 6922-1994 Two-tooth rough machining end mill slot milling cutter sample and proofreading sample testing HB 6921-94 slot milling cutter
HB 743-1977 Tap slot milling cutter sample and proofreading sample testing HB 736-92 slot milling cutter
HB 2410-1977 HB 243-70 CG thread plug gauge d=6~30mm
HB 7308-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91AG and BG Thread d=3~4mm p=0.5~0.7mm
HB 2364-1977 Spiral fluting machine for processing light alloy non-through hole HB 241-75 thread, hand tap d=3~3.5mm
HB 2388-1977 Thread rolling shaft for rolling HB 243-70 thread rolling wheel d=36~45mm t=1.5mm
HB 2400-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass TY d=52~100mm
HB 6941-1994 Template and Proofreading Template for Four-gear Bulb End-milling Cutter Slot Cutter - for Inspection of Slot Cutter in HB 6940-94
HB 2417-1977 HB 243-70 threaded comb-shaped caliper with table d=3~6mm
HB 2428-1978 Machine tap d=8~20mm for processing HB 243-70 AG interference thread
HB 2387-1977 Thread rolling shaft for rolling HB 243-70 thread rolling wheel d=3~33mm t=0.5~0.5mm
HB 6926-1994 Three-tooth rough machining end mill slot milling cutter sample and proofreading sample testing HB 6925-94 slot milling cutter
HB 2413-1977 HB 243-70 CG thread plug gauge and thread group plug gauge application size d=5~30mm
HB 2363-1977 Machine and hand taps d=12~36mm for processing light alloy non-through hole HB 241-75 thread
HB/Z 85 COR 1984 Corrigendum to HB/Z85-84
HB 2397-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=105~150mm
HB 2421-1977 HB 243-70 threaded comb-shaped caliper for watch parts application size d=3~30mm
HB 2386-1977 Thread rolling shaft for rolling HB 241-75, HB 242-70 thread rolling wheel d=36~45mm t=1.5~2mm
HB 6938-1994 Excentric-back Cutter for Double-gear Bulb End-milling Cutter Used for HB 6929-94 and HB 6932-94 D=56~63mm
HB 6939-1994 Template and Proofreading Template for Double-gear Bulb End-milling Cutter Excentric-back Cutter - Slot Cutter Inspection of HB 6938-94
HB 2393-1977 HB 242-70 threaded end ring gauge d=105~150mm
HB 2371-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=12~36mm
HB 2392-1977 HB 242-70 threaded end ring gauge d=1~100mm
HB 2420-1977 Appraisal of HB 243-70 threaded band table comb-shaped caliper wear pair table parts d=7~30mm
HB 6921-1994 Slot milling cutter for two-tooth roughing end mill for HB 6910-94 HB 6913-94.D=45~63mm
HB 6936-1994 Slot Cutter for Two-gear Bulb End-milling Cutter, Applicable to HB 6929-94 HB 6932-94 D=40~63mm
HB 2412-1977 HB 243-70 CG thread group plug gauge d=6~30mm
HB 2384-1977 Thread rolling wheel for HB 243-70 thread d=3~45mm t=0.5~1.5mm
HB 6927-1994 HB 6911~6912-94 HB 6914~6915-94.D=75~80mm
HB 743-1992 Template and Reference Template Used for Screw Tap Slot Milling Cutter for Inspecting HB 736-92 Slot Milling Cutter
HB 4601-1992 Template and Reference Template for Expanding Drill Slot Milling Cutter for Machining Aluminum Alloy for Inspecting HB 4600-92 Slot Milling Cutter
HB 2407-1977 HB 243-70 AG, BG thread group plug gauge d=6~30mm
HB 2385-1977 Thread rolling shaft for rolling HB 241-75, HB 242-70 threads d=2~33mm t=0.35~2mm
HB 2359-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=10~36mm
HB 2419-1977 Appraisal of HB 243-70 threaded band watch comb-shaped caliper wear pair watch parts d=3~6mm
HB 2378-1977 Nut tap d=8~11mm for processing heat-resistant steel HB 241-75 thread
HB 4577-1992 Template and reference template for two-tooth end milling cutter slot milling cutter For inspecting HB 4576-92 slot milling cutter
HB 4579-1992 Template and reference template for three -tooth end milling cutter slot milling cutter For inspecting HB 4578-92 slot milling cutter
HB 2426-1978 Machine tap d=3~5mm for processing HB 243-70 AG interference thread
HB 6943-1994 Template and Proofreading Template for Six-gear Bulb End-milling Cutter Slot Cutter - for Inspection of Slot Cutter in HB 6942-94
HB 741-1992 Template and Reference Template Used for Slot Milling Cutter of Expanding Drill of Four-tooth-set Type for Inspecting HB 734-92 Slot Milling Cutter
HB 2418-1977 HB 243-70 Comb-shaped caliper with threaded table d=7~30mm
HB 2383-1977 HB 242-70 thread rolling wheel for reinforced clearance thread d=2~33mm t=0.35~2mm
HB 257-1973 HB 241-70, HB 243-70 HB 243-70 threaded bottom hole with smooth plug gauge application size M1~M120, AG3~AG30
HB 7310-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 AG and BG Thread d=12~30 p=1.25~1.5mm
HB 7313-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 CG and DG Thread d=5~10mm p=0.8~1.5mm
HB 2356-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=1~3.5mm
HB 6919-1994 Slot milling cutter for six-tooth roughing end mill for HB 6906-94 HB 6909-94.D=55~75mm
HB 7314-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 CG and DG Thread d=12~30mm p=1.25~1.5mm
HB 7315-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 CG and DG Thread d=33~39mm p=1.5mm
HB 2373-1977 Machine and hand taps for processing HB 241-75 threads with non-through holes in heat-resistant steel d=4~7mm
HB 2414-1977 HB 243-70 threaded comb gauge d=3~30mm
HB 2377-1977 Nut tap d=4~7mm for processing heat-resistant steel HB 241-75 thread
HB 6942-1994 Slot Cutter for Six-gear Bulb End-milling Cutter, Applicable to HB 6904~6905-94 and HB 6907~6908-94 D=63~80mm
HB 4581-1992 Template and reference template for four -tooth end milling cutter slot milling cutter For inspecting HB 4580-92 slot milling cutter
HB 2357-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=4~7mm
HB 2399-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass TY d=6~48mm
HB 2408-1977 HB 243-70 AG, BG thread plug gauge and thread group plug gauge application size d=3~30mm
HB 2372-1977 Machine and hand taps d=1~3.5mm for machining heat-resistant steel non-through hole HB 241-75 thread
HB 2379-1977 Nut taps for processing heat-resistant steel HB 241-75 threads d=12~36mm
HB 2360-1977 Machine and hand taps d=1~3.5mm for machining light alloy non-through hole HB 241-75 thread
HB 8502-2014 Endurance test requirements for fuel system accessories of civil aircraft
HB 2367-1977 Spiral fluting machine for processing light alloy non-through hole HB 241-75 thread, hand tap d=10~20mm
HB 4583-1992 Template and reference template for six -tooth end milling cutter slot milling cutter For inspecting HB 4582-92 slot milling cutter
HB 4588-1992 Template and reference template for two-tooth end milling cutter for machining light alloy For inspecting HB 4587-92 slot milling cutter
HB 4652-1992 Template and Checking Template
HB 2365-1977 Spiral fluting machine for processing light alloy non-through hole HB 241-75 thread, hand tap d=4~7mm
HB 2404-1977 HB 243-70 AG, BG thread plug gauge d=3~5mm
HB 2427-1978 Machine tap d=6~7mm for processing HB 243-70 AG interference thread
HB 2424-1978 Hand tap for processing HB 243-70 AG interference thread d=6~7mm
HB 2376-1977 Nut tap d=3~3.5mm for processing heat-resistant steel HB 241-75 thread
HB 2375-1977 Machine and hand taps d=12~36mm for processing heat-resistant steel non-through hole HB 241-75 thread
HB 2425-1978 Hand tap for processing HB 243-70 AG interference thread d=8~30mm
HB 2401-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass YT d=105~150mm
HB 2361-1977 Machine and hand taps d=4~7mm for processing light alloy non-through hole HB 241-75 thread
HB 2370-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=8~11mm
HB 2380-1977 HB 241-75, HB 242-70 thread rolling wheels for ordinary and ordinary clearance threads d=2~45mm t=0.35~2mm
HB 4594-1992 Template and Reference Template for Shell End Milling Cutter Slot Milling Cutter for Inspecting HB 4593-92 Slot Milling Cutter
HB 7311-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 AG and BG Thread d=33~39mm p=1.5mm
HB 6928-1994 Three-tooth rough machining end mill with back-side tool sample and proofreading sample for testing HB 6927-94 slot milling cutter
HB 741-1979 Four-tooth sleeve type reaming drilling slot milling cutter sample and proofreading sample testing HB 734-92 slot milling cutter
HB 2416-1977 HB 243-70 threaded comb-shaped caliper with table active measuring head d=3~30mm
HB 2369-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=4~7mm
HB 6918-1994 Four-tooth rough machining end mill slot milling cutter sample and proofreading sample testing HB 6917-94 slot milling cutter
HB 2382-1977 HB 242-70 thread rolling wheel for reinforced clearance thread d=2~45mm t=0.35~2mm
HB 7316-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91CG and DG Thread d=42~45mm p=1.5mm
HB 6924-1994 Two-tooth rough machining end mill back cutter sample and proofreading sample test HB 6923-94 slot milling cutter
HB 2390-1977 Thread rolling plate for HB 241-75, HB 242-70 thread d=2~6mm t=0.35~2mm
HB 4585-1992 Template and reference template for eight-tooth end milling cutter slot milling cutter For inspecting HB 4584-92 slot milling cutter
HB 7312-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 AG and BG Thread d=42~45mm p=1.5mm
HB 7309-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 AG and BG Thread d=5~10mm p=0.8~1.5mm

未注明发布机构

HB 226.3-2000 Construction Industry Contract Toolbox Tool 3 Common Reference Standards HB 226.3 2000
HB 139(Int)-1999 General Management Manual HB 139 (Int) 1999

British Standards Institution (BSI)

BS HB 10167:1999 Handbook HB 10167:1999
BS HB 10168:1999 Handbook HB 10168:1999
BS HB 10170:1999 Handbook HB 10170:1999
BS HB 10169:1999 Handbook HB 10167:1999
HB 10194-2012 HB 10194:2012 Guidance note 3. Inspection and Testing 6/ed

German Institute for Standardization

DIN EN ISO 8502-8:2005 Preparation of steel surfaces before application of coating materials – Surface cleanliness assessment tests – Part 8: Field test for the refractometric determination of water (moisture) (ISO 8502-8:2001); German version EN ISO 8502-8:2004
DIN EN ISO 8502-4:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017); Germa
DIN EN ISO 8502-9:2020 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:2020); German version EN ISO
DIN EN ISO 8502-2:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017); German version EN ISO 8502-2:2017
DIN EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017); Ge
DIN EN ISO 8502-6:2020 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of water soluble contaminants for analysis (Bresle method) (ISO 8502-6:2020)
DIN EN ISO 8502-4:1999-06 Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993)
DIN EN ISO 8502-11:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006) English version of
DIN EN ISO 8502-15:2025 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 15: Extraction of soluble contaminants for analysis by acid extraction (ISO 8502-15:2020)
DIN EN ISO 8502-15:2024 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 15: Extraction of soluble contaminants for analysis by acid extraction (ISO 8502-15:2020); German and English ver...
DIN EN ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:2006); English version of DIN EN
DIN EN ISO 8502-2:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2005); English version of DIN EN ISO 8502-2:
DIN EN ISO 8502-3:1999-06 Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992)
DIN EN ISO 8502-2 E:2013 Draft Document - Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO/DIS 8502-2:2013); German versio...
DIN EN ISO 8502-8:2005-03 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture (ISO 8502-8:2001)

Standards New Zealand

NZS HB44:2001 Subdivision for People and the Environment (SNZ HB 44:2001)

European Committee for Standardization (CEN)

EN ISO 8502-11:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate
EN ISO 8502-8:2004 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric dedetermination of moisture
EN ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:2006)
EN ISO 8502-12:2004 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions
prEN ISO 8502-5 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO/DIS 8502-5:2024)
ENV ISO 8502-1:1999 Preparation of Steel Substrates before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 1: Field Test for Soluble Iron Corrosion Products ISO/TR 8502-1: 1991
EN ISO 8502-4:1999 Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 4: Guidance on the Estimation of the Probability of Condensation Prior to Paint Application ISO 8502-4:1993
EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
EN ISO 8502-9:2000 Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 9: Field Method for the Conuctometric Determination of Water-Soluble Salts ISO 8502-9:1998 + A1:2000
EN ISO 8502-3:1999 Preparation of Steel Substrates Before Application of Paints and Related Products - Test for the Assessment of Surface Cleanliness Part 3: Assessment of Dust on Steel Surfaces Prepared for Painting (Presssure-Sensitive Tape Method) ISO 8502-3:1992
EN ISO 8502-5:2004 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)

Lithuanian Standards Office

LST EN ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:2006)
LST EN ISO 8502-4:2002 Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993)
LST EN ISO 8502-12:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions (ISO 8502-12:2003)
LST EN ISO 8502-9:2020 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:2020)
LST EN ISO 8502-2:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2005)
LST EN ISO 8502-11:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006)
LST EN ISO 8502-9:2002 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998)
LST EN ISO 8502-3:2002 Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992)
LST EN ISO 8502-5:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998)

PT-IPQ

NP EN ISO 8502-2:2001 Preparation of steel substrates before application of paints and related products Part 2:Laboratory determiantion of chloride on cleaned surfaces(ISO 8502-2:1992)
NP EN ISO 8502-9:2003 Preparation of steel substrates before application of paints and related products Tests for assessment of surface cleanliness Part 9:Field method for the conductometric determination of water-soluble salts (ISO 8502-9-1998)
NP EN ISO 8502-4:2001 Preparation of steel substrates before application of paint and related products Test for the assessment of surface cleanliness Part 4:Guidance on the estimation of the probability of condensation prior to paint application(ISO 8502-4:1993)
NP EN ISO 8502-6:2001 Preparation of steel substrates before application of paint and related products Test for the assessment of surface cleanliness Part 6:Extraction of soluble contaminants for analysis The Bresle method(ISO 8502-6:1995)
NP EN ISO 8502-3:2001 Preparation of steel substrates before applicaiton of paints and related products Tests for the assessment of surface cleanliness Part 3:Assessment of dust on steel surfaces prepared for painting(pressure-sensitive tape method)(ISO 8502-3:1992)

AT-ON

OENORM EN ISO 8502-9:2020 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:2020)

CH-SNV

SN EN ISO 8502-9:2021 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:2020)
SN EN ISO 8502-6:2020 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of water soluble contaminants for analysis (Bresle method) (ISO 8502-6:2020)

South African Bureau of Standard

SANS 1200 HB:1985 Standardized specification for civil engineering construction Section HB: Cladding and sheeting

Spanish Association for Standardization (UNE)

UNE-EN ISO 8502-4:2000 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINT AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 4: GUIDANCE ON THE ESTIMATION OF THE PROBABILITY OF CONDENSATION PRIOR TO PAINT APPLICATION (ISO 8502-4:1993)
UNE-ENV ISO 8502-1:2000 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 1: FIELD TEST FOR SOLUBLE IRON CORROSION PRODUCTS (ISO/TR 8502-1:1991)
UNE-EN ISO 8502-3:2000 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINT AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD) (ISO 8502-3:1992)
UNE-EN ISO 8502-11:2007 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006)
UNE-EN ISO 8502-8:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric dedetermination of moisture (ISO 8502-8:2001)
UNE-EN ISO 8502-6:2007 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:2006)
UNE-EN ISO 8502-12:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions (ISO 8502-12:2003)
UNE-EN ISO 8502-2:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2005)
UNE-EN ISO 8502-2:2000 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 2: LABORATORY DETERMINATION OF CHLORIDE ON CLEANED SURFACES (ISO 8502-2:1992)
UNE-EN ISO 8502-6:2000 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 6: EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS - THE BRESLE METHOD (ISO 8502-6:1995)
UNE-EN ISO 8502-9:2001 Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 9: Field method for the conductometric determination of water-soluble salts. (ISO 8502-9:1998)
UNE-EN ISO 8502-5:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998)
AENOR UNE-EN ISO 8502-2:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017)

Swedish Institute for Standards

SS-EN ISO 8502-11:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for turbidimetric determination of water-soluble sulphate (ISO 8502-11:2006)
SS-EN ISO 8502-9:2020 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:2020)
SS-EN ISO 8502-4:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017)
SS-EN ISO 8502-4:1999 Preparation of steel substrates before application of paint and related products - Tests for the assesssment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993)
SS-EN ISO 8502-2:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017)
SS-EN ISO 8502-8:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for refractometric determination of moisture (ISO 8502-8:2001)
SS-EN ISO 8502-12:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions (ISO 8502-12:2003)
SS-EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017)
SS-EN ISO 8502-6:2020 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of water soluble contaminants for analysis (Bresle method)(ISO 8502-6:2020)
SS-EN ISO 8502-5:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998)
SS-EN ISO 8502-15:2024 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 15: Extraction of soluble contaminants for analysis by acid extraction (ISO 8502-15:2020, IDT)

Standards Norway

NS-EN ISO 8502-4:2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017)
NS-EN ISO 8502-8:2004 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 8: Field method for the refractometric dedetermination of moisture (ISO 8502-8:2001)
NS-EN ISO 8502-2:2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017)
NS-EN ISO 8502-3:1999 Preparation of steel substrates before application of paint and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992)
NS-EN ISO 8502-9:2020 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:2020)
NS-EN ISO 8502-2:2005 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2005)
NS-EN ISO 8502-2:1999 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992)
NS-EN ISO 8502-6:2020 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of water soluble contaminants for analysis (Bresle method)(ISO 8502-6:2020)
NS-EN ISO 8502-6:1999 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of soluble contaminants for analysis — The Bresle method (ISO 8502-6:1995)
NS-EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017)
NS-EN ISO 8502-9:2000 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998)
NS-EN ISO 8502-12:2004 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 12: Field method for the titrimetric determination of water-soluble ferrous ions (ISO 8502-12:2003)
NS-EN ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of soluble contaminants for analysis — The Bresle method (ISO 8502-6:2006)
NS-EN ISO 8502-11:2006 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006)
NS-EN ISO 8502-4:1999 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993)
NS-EN ISO 8502-10:2004 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 10: Field method for the titrimetric determination of water-soluble chloride (ISO 8502-10:1999)
NS-EN ISO 8502-5:2004 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998)

Danish Standards Foundation

DANSK DS/EN ISO 8502-6:2020 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 6: Extraction of water soluble contaminants for analysis (Bresle method)(ISO 8502-6:2020)
DANSK DS/EN ISO 8502-9:2020 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:2020)
DANSK DS/EN ISO 8502-4:2017 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017)
DANSK DS/EN ISO 8502-15:2025 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 15: Extraction of soluble contaminants for analysis by acid extraction (ISO 8502-15:2020)

Society of Automotive Engineers (SAE)

SAE TA-HB-0007-1-2012 Logistics Product Data Reports Handbook (Formerly TechAmerica TA-HB-0007-1)
SAE GEIA-HB-0005/1A-2016 GEIA-HB-0005-1