Sub-zero experimental conditions

Sub-zero experimental conditions, Total:238 items.

The international standard classification for "Sub-zero experimental conditions" includes: Moulding equipment , Gears , Components for aerospace construction , Acoustics in building. Sound insulation. , Motorcycles and mopeds , Furniture , Optical equipment , Power stations in general , Tobacco, tobacco products and related equipment .

The Chinese standard classification for "Sub-zero experimental conditions" includes: Mould , Gear and gear drive , Metal casting and forging materials used for aviation and aerospace , Basic standards and general methods , Moulds , Non-traditional processing technology , Noise and vibration test methods , Bicycle , Furniture products , Optical instrument in general , Electric power testing technique , Technical management , Sewing machine , Office supplies and office implements , Tobacco curing in general .

Professional Standard - Machinery

JB/T 6060.4-1992 Parts of Hammer Forged Dies Technical Conditions
JB/T 10423-2004 Motor gears—Technical specifications of gears and gear units
JB/T 7188-1995 Technical conditions for punching die steel formwork parts
JB/T 7653-1994 Die parts technical conditions
JB/T 7653-2008 Specification of stamping die components
JB/T 8070-2008 Specification of components for stamping die sets
JB/T 8070-1995 Technical specifications of elenents for press die sets
JB/T 11841-2014 Rolling bearing parts-Metal solidcages-Specifications

未注明发布机构

DIN EN ISO 11266 E:2020-02 Guidelines for Laboratory Testing of Biodegradation of Soil Organic Chemical Agents under Aerobic Soil Conditions (Draft)
DIN 16742 E:2012-10 Plastics moulded parts - Tolerances and acceptance conditions
DIN EN ISO 15473 E:2020-02 Guidelines for laboratory testing of biodegradability of organic compounds in soil under anaerobic conditions (draft)
DIN EN 13050 E:2006-03 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray

Professional Standard - Aviation

HB 457-1971 Specifications for general parts and machine tool fixture parts
HB 892-1966 Technical conditions of cold stamping die parts
HB 3-56 Technical conditions of fixture parts
HB 0-21-2008 joggling of sheet metal
HB 892-1990 Techinical conditions for cold punching mould parts
HB 892-1975 Technical conditions of cold stamping die parts
HB 0-21-1983 Sagging of sheet metal parts
HB 2089-1989 Measuring tools, measuring tool parts technical conditions
HB 900-2000 Specifications for parts and components of test equipment used in aircraft manufacturing
HB 457-1987 Technical Specification for Common Parts and Machine Tool Fixture Components
HB 2089-1974 Measuring tools, measuring tool parts technical conditions

Anhui Provincial Standard of the People's Republic of China

DB3416/T 003-2021 Experimental animal environmental conditions Experimental sheep
DB3416/T 004-2021 Experimental animal environmental conditions Experimental duck
DB3416/T 002-2021 Experimental animal environmental conditions Experimental cattle

商务部

SB/T 11220-2018 Implementation Guide for Product Barcoding in Retail Logistics Units
SB/T 11219-2018 Retail Product Barcoding Implementation Guide

机械工业部

JB/T 7642.5-1994 Die parts and their technical conditions. Universal mold base for punch molds. Lower mold base for bending molds.
JB/T 7642.4-1994 Die parts and their technical conditions Die universal die base B type lower die base

Professional Standard - Aerospace

QJ 759-1982 模具
QJ 507-1979 "General Parts" Technical Conditions
QJ 1765.4-1989 Lower fixing plate for rubber mold parts
QJ 763-1983 Technical Specifications for Parts of Small Single Split Mold
QJ 2522-1993 Technical conditions of cold stamping die parts
QJ 507-1987 "General Parts" Technical Conditions
QJ 1766.4-1989 Rubber mold parts lower backing plate
QJ 1146-1987 Technical conditions for welding fixture parts and components
QJ 2849-1996 Technical Specification for Quality Acceptance of Electric Cast Copper and Cast Nickel Parts
QJ 1766.3-1989 Rubber mold parts lower backing plate
QJ 1765.3-1989 Lower fixing plate for rubber mold parts

工业和信息化部

JB/T 8070-2020 Stamping dies - Die set components - Specifications
JB/T 7653-2020 Stamping dies - Components - Specifications

Liaoning Provincial Standard of the People's Republic of China

DB21/T 1990-2012 General Technical Conditions for Mobile Laboratory Experiment Cabin

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 24820-2024 General technical requirements for laboratory furniture
GB/T 11162-2009 General specification of optical components for the scale and surface defects
GB 24820-2009 General technical requirements for laboratory furniture
GB/T 4170-2006 Specification of components of injection moulds for plastics
GB/T 19513-2004 Acoustics - Measurement of office screen sound attenuation under specific laboratory conditions
GB/T 11162-1989 General specification of optical components for the scale and surface defects
GB/T 9531.1-1988 General specification for electronic ceramic parts
GB/T 4679-2003 Specification of die-casting die components
GB/T 3567-1983 Test methods of main specifications of components and parts of bicycles
GB/T 4170-1984 Components of injection mould for plastics; Specification

Beijing Provincial Standard of the People's Republic of China

DB11/T 1464.2-2017 Environmental conditions for laboratory animals - Part 2: Experimental cattle
DB11/T 1464.5-2018 Environmental conditions of experimental animals - Part 5: Experimental gerbils
DB11/T 1807-2020 Experimental Animal Environmental Conditions
DB11/T 1464.4-2018 Environmental conditions for experimental animals - Part 4: Experimental marmosets
DB11/T 1464.3-2017 Environmental conditions for experimental animals - Part 3: Sheep for experimental use
DB11/T 1464.1-2017 Environmental conditions for laboratory animals - Part 1: Experimental pigs

Professional Standard - Electricity

DL/T 1082-2008 Technical requirement of high voltage laboratory

Professional Standard - Railway

TB 1550-1984 Technical conditions of cold stamping die parts

Professional Standard - Electron

SJ/T 10520-1994 Specification for components of injection mould for plastic
SJ 2980-1988 Technical specifications for components of combined dies
SJ/T 10340-1993 Technical specification of fine blanking die elements
SJ 2652-1985 Cold press dies - Performance specification for components of cold press dies
SJ 1783-1981 Specification for electrical vacuum ceramic parts

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 4679-2017 Diecasting dies--Components--Specifications

Professional Standard - Military and Civilian Products

WJ 1854-1989 Specifications for anti-reflection coatings for optical parts
WJ 2010-1991 Gold-plated technical conditions for fuze parts
WJ 1476-1985 Clamp base and its parts technical conditions
WJ 2028-1991 Specifications for shot peening of steel parts
WJ 1710-1987 General technical conditions for cold stamping parts

Professional Standard - Light Industry

QB/T 2505-2000 Technical Specification for Sewing Machine Parts Blackening

Professional Standard - Education

JY 0123-1991 Specification for electrostatic experimental box of primary school
JY 0124-1991 Specification for electric current experimental box of primary school

Professional Standard - Tobacco

YC/T 291-2009 Ambient condition of tobacco grading laboratory

Group Standards of the People's Republic of China

T/CSAE 133-2020 Performance requirements for laboratorylight stability of passenger car parts

Taiwan Provincial Standard of the People's Republic of China

CNS 12211-1994 Environmental Requirements for Electronic Components

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3979-2021 Breeding technical conditions of experimental zebrafish

International Electrotechnical Commission (IEC)

IEC 60332:2024 SER Tests on electric and optical fibre cables under fire conditions -？ ALL PARTS

PL-PKN

PN M75250-1973 Labora?ory water pipe fittings Valves

Korean Agency for Technology and Standards (KATS)

KS P ISO TR 18112:2009 Clinical laboratory testing and in vitro diagnostic test systems-In vitro diagnostic medical devices for professional use-Summary of regulatory requirements for information supplied by the manufacturer
KS F ISO 10053-2008(2018) Measurement of office screen sound attenuation under specific laboratory conditions
KS F ISO 10053-2023 Measurement of office screen sound attenuation under specific laboratory conditions
KS B 0244-1987(2012) Radii Under the Head for External Threaded Fasteners
KS M ISO 15361:2007 Pulps－Determination of zero-span tensile strength, wet or dry
KS M ISO 15361:2017 Pulps－Determination of zero-span tensile strength, wet or dry
KS K 0901-1985 Standard atmospheres for conditioning and testing textiles
KS K 0901-2006 Standard atmospheres for conditioning and testing textiles
KS T ISO 20200:2012 Plastics-Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
KS T ISO 20200-2012(2017) Plastics－Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
KS T ISO 20200-2022 Plastics－Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
KS T ISO 20200-2012(2022) Plastics－Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
KS I ISO 11266:2005 Soil quality－Guidance on laboratory testing for biodegradation oforganic chemicals in soil under aerobic conditions
KS I ISO 11266:2021 Soil quality — Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions
KS I ISO 15473:2009 Soil quality-Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions
KS I ISO 11266-2005(2015) Soil quality－Guidance on laboratory testing for biodegradation oforganic chemicals in soil under aerobic conditions

International Organization for Standardization (ISO)

ISO 4821:2022 Plain bearings — Dynamic adhesion test method for DLC coated parts under lubricated condition
ISO/TR 18112:2006 Clinical laboratory testing and in vitro diagnostic test systems - In vitro diagnostic medical devices for professional use - Summary of regulatory requirements for information supplied by the manufacturer
ISO 10053:1991 Acoustics; measurement of office screen sound attenuation under specific laboratory conditions
ISO 20200:2015 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
ISO 20200:2004 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
ISO/PRF 20200:2023 Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test
ISO 20200:2023 Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test
ISO 11266:1994 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T P.570-2018 Artificial noise fields under laboratory conditions (Study Group 12)
SERIE G SUPP 5 SPANISH-1984 Measurement of the load of telephone circuits under field conditions

HU-MSZT

MNOSZ 14717-1953 Enamel tools for laboratory use. Component
MSZ 6608-1951 Laboratory steel work table parts, H-marked fixing parts and wire-wrapped parts
MNOSZ 80-1952 Transport and take-over conditions for cast iron parts and pressure-bearing parts
MNOSZ 6464-1952 Technical conditions for layered columns of vehicle parts

European Committee for Standardization (CEN)

EN 592:1994 In Vitro Diagnostic Systems - Requirements for User Manuals for In Vitro Diagnostic Instruments for Home Use
EN 592:2002 Instructions for Use in Vitro Diagnostic Instruments for Self-Testing
DD ENV 13050-2000 Curtain Walling - Watertightness - Laboratory Test under Dynamic Condition of Air Pressure and Water Spray
EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
EN 13641:2002 Elimination or reduction of risk of infection related to in vitro diagnostic reagents
EN 14806:2005 Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test
EN ISO 20200:2005 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratoryscale test
EN ISO 11266:2020 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions (ISO 11266:1994)

British Standards Institution (BSI)

BS ISO 20457:2018 Plastics moulded parts. Tolerances and acceptance conditions
DD ENV 13050-2001 Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
BS 6483-1:1984 Fertilizer distributors. Methods of evaluating performance under laboratory and field conditions
BS ISO 4821:2022 Plain bearings. Dynamic adhesion test method for DLC coated parts under lubricated condition
BS DD ENV 13050:2001 Curtain walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
BS EN 13050:2011 Curtain Walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
BS ISO 15361:2001 Pulps. Determination of zero-span tensile strength, wet or dry
BS EN ISO 20200:2005 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
BS EN ISO 20200:2023 Plastics. Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test
BS ISO 20200:2005 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
BS EN 14806:2005 Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test
BS ISO 13347-1:2004+A1:2010 Industrial fans. Determination of fan sound power levels under standardized laboratory conditions.. General overview
21/30419771 DC BS ISO 4821. Plain bearings. Dynamic adhesion test method for DLC coated parts under lubricated condition
BS EN ISO 20200:2015 Plastics. Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
BS ISO 13347-4:2004 Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Sound intensity method
BS ISO 13347-2:2004 Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Reverberant room method

German Institute for Standardization

DIN 12594:1998-08 Laboratory glassware - Ground joint parts
DIN EN 13050:2011-09 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray; German version EN 13050:2011
DIN 12594:1998 Laboratory glassware - Ground joint parts
DIN EN ISO 20200:2005 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200:2004); English version of DIN EN ISO 20200
DIN ISO 11266:1997 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions (ISO 11266:1994)
DIN ISO 15473:2002 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions (ISO 15473:2002)
DIN EN 14806:2005 Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test; English version of DIN EN 14806
DIN 16742:2013 Plastics moulded parts - Tolerances and acceptance conditions; Text in German and English

Association Francaise de Normalisation

NF P28-105*NF EN 13050:2012 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
NF T03-410:1998 Synthetic mineral fibers for blasting in building construction. In vitro solubility. Test method.
NF T51-806:2005 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test.
NF E60-181:2001 Moyens de production - Conditions de réception - Méthode d'évaluation de l'aptitude à réaliser des pièces
NF A91-103:1969 Revêtements métalliques - Conditions de réception des pièces en alliages de zinc nickelées et chromées
NF H60-149:2005 Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test.
NF S73-513-2:2006 Footwear protecting against chemicals - Part 2 : requirements for footwear resistant to chemicals under laboratory conditions.
NF T51-806*NF EN ISO 20200:2016 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
NF EN ISO 20200:2016 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory test

Lithuanian Standards Office

LST EN 13050-2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
LST EN 13832-2-2007 Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
LST EN 13832-3-2007 Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions
LST EN 14806-2005 Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test

Danish Standards Foundation

DS/EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
DS/EN 13832-2:2006 Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
DS/EN 13832-3:2006 Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions
DS/EN ISO 20200:2005 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
DS/EN 14806:2005 Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test
DS/ISO 11266:1998 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions
DS/EN 321:1993 Fibreboards. Cyclic tests in humid conditions

SCC

NS-EN 13050:2011 Curtain Walling — Watertightness — Laboratory test under dynamic condition of air pressure and water spray
NS-ENV 13050:2000 Curtain walling — Watertightness — Laboratory test under dynamic condition of air pressure and water spray
AWWA QTC97193 Application of a Bench Scale BDOC Column Method to Full Scale Plant Conditions
DANSK DS/EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
AENOR UNE-EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
06/30144884 DC EN 13050. Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
UNE-ENV 13050:2001 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
10/30204179 DC BS EN 13050. Curtain Walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
BS PD IEC/TR 60493-3:2017 Guidelines for the statistical analysis of ageing test data-Minimum specimen numbers at different test conditions with given experimental data
DANSK DS/ISO 10053:1993 Acoustics - Measurement of office screen sound attenuation under specific laboratory conditions
DIN EN 13050 E:2011 Draft Document - Curtain walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray; German version FprEN 13050:2010
MIL MIL-H-60840-1968 HOLDER, STRIP, ASSEMBLY, METAL PARTS
AWWA QTC97134 Performance of Pilot and Laboratory Scale Model Distribution Systems Under Unsteady-State Conditions
DIN ISO 20457 E:2019 Draft Document - Plastics moulded parts - Tolerances and acceptance conditions (ISO 20457:2018); Text in German and English
BS ISO 13347-1:2004 Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. General overview
DANSK DS/IEC TR 60493-3:2017 Guidelines for the statistical analysis of ageing test data – Part 3: Minimum specimen numbers at different test conditions with given experimental data
NS-EN 14806:2005 Packaging — Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test
NS-EN 13832-2:2006 Footwear protecting against chemicals — Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
DANSK DS/EN 13832-2:2006 Footwear protecting against chemicals – Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
AENOR UNE-EN 13832-2:2007 Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
VDI 4221 BLATT 2-2017 Quality assurance — Requirements for interlaboratory tests in the field of emission control — Development, implementation and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions
BS EN 321:1993 Fibreboards. Cyclic tests in humid conditions
UNE 7088:1955 COMPACTNESS DETERMINATION IN THE ARIDS FOR MORTARS AND CONCRETES

AENOR

UNE-EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
UNE-EN 13832-2:2007 Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
UNE-EN 13832-3:2007 Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions

SE-SIS

SIS SS-ISO 7326:1990 Rubber and plastics hoses — Assessment of ozone resistance under static conditions

KR-KS

KS F ISO 10053-2008(2023) Measurement of office screen sound attenuation under specific laboratory conditions
KS I ISO 11266-2021 Soil quality — Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions

BE-NBN

NBN-ISO 10053:1992 Acoustics - Measurement of office screen sound attenuation under specific laboratory conditions
NBN-EN 22234-1993 Packaging. Complete, filled transport packages. Stacking tests using static load (ISO 2234: 1985)
NBN T 61-014-1989 Admixtures for concrete- Testing conditions

GSO

GSO ISO 20200:2013 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
GSO ISO 10053:2013 Acoustics -- Measurement of office screen sound attenuation under specific laboratory conditions
GSO ISO 11266:2015 Soil quality -- Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions

Japanese Industrial Standards Committee (JISC)

JIS K 6877:2010 Adhesives-Guide to the selection of standard laboratory ageing conditions for testing bonded joints
JIS B 9201:1984 Parts for noodle making machines
JIS P 8220-2:2012 Pulps -- Laboratory wet disintegration -- Part 2: Disintegration of mechanical pulps at 20 degree C
JIS P 8220-3:2020 Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at greater than 85 degree C

American Society for Testing and Materials (ASTM)

ASTM D5009-02(2005) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-96(2002) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-96 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02(2017) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM E2270-03 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
ASTM D5009-02(2011) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM E2270-14 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
ASTM D5327-97 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
ASTM D5327-97(2021)e1 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
ASTM F1650-98(2014) Standard Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions
ASTM F1634-95(2008) Standard Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices
ASTM F1634-95(2000) Standard Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices

VN-TCVN

TCVN 7593-2006 Soil quality.Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions
TCVN 6858-2001 Soil quality.Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions

RO-ASRO

STAS 10975/2-1988 WOODEN PRODUCTS PROTECTION AGAINST ENVIRONMENTAL FACTORSEnvironmental tests under labora-tory conditions

TH-TISI

TIS 2512-2010 Plastics.determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory.scale test

VDI - Verein Deutscher Ingenieure

VDI 4221 BLATT 2-2015 Quality assurance - Requirements on interlaboratory tests in immission control - Design@ performance and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions
VDI 4221 BLATT 4-2019 Quality assurance - Requirements on interlaboratory tests in immission control - Design@ performance and evaluation of interlaboratory tests for olfactometry under laboratory conditions

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE LV-11-C056-2011 Towards Net Zero Energy Buildings in Hot Climate@ Part 2: Experimental Feedback

U.S. Military Regulations and Norms

ARMY MIL-W-48381-1974 WARHEAD SECTION, GM, PRACTICE, LIGHTWEIGHT, M252E1 PARTS AND ASSEMBLING
ARMY MIL-W-48381 REINST NOTICE 2-1996 WARHEAD SECTION, GM, PRACTICE, LIGHTWEIGHT, M252E1 PARTS AND ASSEMBLING
ARMY MIL-W-48369 (5)-1980 WARHEAD SECTION, GM, PRACTICE, LIGHTWEIGHT, M252 PARTS AND ASSEMBLING
ARMY MIL-W-48369-1974 WARHEAD SECTION, GM, PRACTICE, LIGHTWEIGHT, M252 PARTS AND ASSEMBLING
ARMY MIL-W-48369 REINST NOTICE 2-1996 WARHEAD SECTION, GM, PRACTICE, LIGHTWEIGHT, M252 PARTS AND ASSEMBLING
ARMY MIL-W-48381 (3)-1975 WARHEAD SECTION, GM, PRACTICE, LIGHTWEIGHT, M252E1 PARTS AND ASSEMBLING
ARMY MIL-W-14969 VALID NOTICE 1-1987 WARHEAD, 2.75 INCH ROCKET, XM229, (TWO-PIECE) PARTS FOR
ARMY MIL-W-14969-1968 WARHEAD, 2.75 INCH ROCKET, XM229, (TWO-PIECE) PARTS FOR
ARMY MIL-W-14969 (1)-1996 WARHEAD, 2.75 INCH ROCKET, XM229, (TWO-PIECE) PARTS FOR

RU-GOST R

GOST 18680-1973 Sealing details. General specifications
GOST R 57225-2016 Plastics. Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test

AT-ON

ONORM EN 321-1993 Fibreboards - Cyclic tests in humid conditions

GOSTR

GOST 34379-2018 Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions

United States Navy

NAVY MIL-H-60840 NOTICE 2-1999 HOLDER, STRIP, ASSEMBLY, METAL PARTS
NAVY MIL-H-60840-1968 HOLDER, STRIP, ASSEMBLY, METAL PARTS