wss specification

wss specification, Total:200 items.

The international standard classification for "wss specification" includes: .

The Chinese standard classification for "wss specification" includes: .

未注明发布机构

FORD WSS-M33J12-A6-2014 ENAMEL, WATERBORNE, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET MIDCOAT, PROCESSED WITH WSS-M33J12-A1/WSS-M33J12-A2/WSS-M33J12-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J12-A1)
FORD WSS-M1A368-A25-2012 STEEL, SHEET, COLD ROLLED, DUAL PHASE (CR DP LOW/HIGH YIELD) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M2A174-A3-2014 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, ENHANCED BAKE RESPONSE, THICKER GAGE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A174-A1)
FORD WSS-M2A163-A2-2014 ALUMINUM ALLOY, AUTOBODY SHEET, NON-HEAT TREATABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A163-A1)
FORD WSS-M3H117-A-2010 CARPET, POLYPROPYLENE, FLAT FELT WITH BINDER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H692-G-2008 FABRIC, PHOENIX PATTERN, WOVEN JACQUARD, HFW ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1H692-A)
FORD WSS-M99P41-A61-2014 LABEL PERFORMANCE, IN MOLD, POST MOLD, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99P41-A10)
FORD WSS-M2F156-B2-2009 FABRIC, VINYL COATED (PVC) CAST/EXPANDED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A367-A48-2012 STEEL, SHEET, HOT ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M2P181-B-2008 PAINT PERFORMANCE, FLEXIBLE SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A348-A7-2013 STEEL, SHEET, COLD ROLLED, DUAL PHASE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A348-A1; No direct replacements, use CBP strategy)
FORD WSS-M1A368-A92-2012 STEEL, SHEET, HOT ROLLED, MARTENSITIC (HR MS) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J12-B4-2021 ENAMEL, 2-COMPONENT URETHANE, (3 WET AMBIENT FLASH PRIME) COMPLIANCE VOC, HIGH SOLIDS THERMOSET CLEARCOAT, PROCESSED WITH WSS-M33J12-B1/WSS-M33J12-B2, EXTERIOR-COMPOSED OF WSS-M33J12-B6/WSS-M33J12-B7 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FOR
FORD WSS-M1C261-A-2008 GREASE, SYNTHETIC HYDROCARBON, PTFE, MOLYBDENUM DISULFIDE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3B72-A5-2002 PHOSPHATE SOLUTION, ZINC, MAKE-UP IRON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3B77-A2-2003 PHOSPHATE SOLUTION, ZINC, FEED MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M9P9-A-2013 DYNAMIC SEALING PERFORMANCE SPECIFICATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A367-A34-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A176-A2-2014 ALUMINUM ALLOY, SHEET, NON-HEAT TREATABLE, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A176-A1)
FORD WSS-M9P9-C-2014 DYNAMIC SEALING PERFORMANCE SPECIFICATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A365-A12-2012 STEEL, SHEET, COLD ROLLED, LOW CARBON, GENERAL FORMABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A365-A11)
FORD WSS-M1A368-A42-2012 STEEL, SHEET, HOT ROLLED, FERRITE BAINITE (HR FB) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M1H1077-A2-2014 FABRIC, PULSE, SOUTH AFRICA, WOVEN DOBBY, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown On FORD WSS-M1H1077-A1)
钢质海洋渔船建造规范 Specifications for the construction of steel marine fishing vessels
FORD WSS-M22P6-A3-2014 CABLE, PRIMARY LOW TENSION, 0.15 MM WALL, 125 C ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M22P6-A1)
FORD WSS-M4D585-B-2011 ABS/POLYCARBONATE BLEND (ABS + PC), IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A368-A21-2012 STEEL, SHEET, COLD ROLLED, DUAL PHASE (CR DP LOW/HIGH YIELD) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M2A174-A2-2013 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, ENHANCED BAKE RESPONSE ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A174-A1
FORD WSS-M98P12-A-2010 STEERING WHEEL MATERIAL PERFORMANCE SPECIFICATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99P41-A51-2014 LABEL PERFORMANCE, HEAT APPLIED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99P41-A10)
FORD WSS-M1C256-A1-2010 GREASE, MANUAL STEERING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M21P27-A2-2009 SUBSEQUENT TREATMENTS FOR FASTENER SURFACE FINISHES ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSS-M21P27-A1)
FORD WSS-M99P41-A51-2008 LABEL PERFORMANCE, HEAT APPLIED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M99P41-A10
FORD WSS-M1C269-A-2008 GREASE, NLGI GRADE 3, ANTI-ROLL BAR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H698-H-2008 FABRIC, KRYPTON PATTERN, WEFT KNITTED, HFW - ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1H698-A)
FORD WSS-M1A367-A50-2012 STEEL, SHEET, HOT ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A368-A51-2012 STEEL, SHEET, COLD ROLLED, TRIP (CR TR) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M1H982-A-2008 FABRIC, SEDAN PATTERN, WOVEN JACQUARD, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1052-A2-2013 POLYCARBONATE (PC), OPTICAL GRADE, LOW MELT FLOW, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D1052-A1)
FORD WSS-M1A341-A7-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1; No direct replacement, use CBP strategy)
FORD WSS-M99P41-A72-2014 LABEL PERFORMANCE, INSTRUCTIONAL TAPES, PSA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99P41-A10)
FORD WSS-M33J10-A2-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET BASECOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M2A177-A3-2012 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, STRUCTURAL, MODERATE STRENGTH AND FORMABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A177-A1
FORD WSS-M1A368-A84-2012 STEEL, SHEET, COLD ROLLED, MARTENSITIC (CR MS) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M1A345-A3-2013 STEEL, SHEET, COLD ROLLED, LOW CARBON, HIGH FORMABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A345-A1; No direct replacement, use CBP strategy)
FORD WSS-M1P51-A-2014 NICKEL PLATED, TUBING INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M9P9-B-2014 DYNAMIC SEALING PERFORMANCE SPECIFICATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1C250-A-2008 GREASE, POLYUREA, PTFE, MULTI-PURPOSE, NLGI 2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J12-B2-2021 ENAMEL, WATERBORNE, (3 WET AMBIENT FLASH PRIME) COMPLIANCE VOC, HIGH SOLIDS THERMOSET BASECOAT PROCESSED WITH WSS-M33J12-B1/WSS-M33J12-B4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J12-B1)
FORD WSS-M1P96-A-2008 PLATING, BRIGHT OR LOW GLOSS DECORATIVE STAINLESS STEEL (CHROME FLASH) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99P41-A61-2008 LABEL PERFORMANCE, IN MOLD, POST MOLD, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M99P41-A10
FORD WSS-M4D796-A3-2010 POLYCARBONATE (PC), MODIFIED, HIGH FLOW AND HIGH HEAT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M22P7-A3-2014 CABLE, PRIMARY LOW TENSION, THIN WALL, 125°C ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M22P7-A1)
FORD WSS-M33J10-B1-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET PRIMER, PROCESSED WITH WSS-M33J10-B2/WSS-M33J10-B4, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M1A341-A11-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1)
FORD WSS-M1H699-K-2008 FABRIC, FLASH II PATTERN, WOVEN JACQUARD, HFW ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1H699-A)
FORD WSS-M17H170-A-2006 MAT, POLYESTER, SPUN BONDED, LATEX IMPREGNATED, 370 G/M2 ***TO BE USED WITH FORD WSS-M99P1111-A*** (USE WSS-M99P32-B)
FORD WSS-M99P41-A11-2008 LABEL PERFORMANCE, SEWN IN ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown On WSS-M99P41-A10
FORD WSS-M2D496-A10-2004 POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A175-A4-2013 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, ENERGY ABSORPTION ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A175-A1
FORD WSS-M5B407-A2-2002 CLEANER, BODY SHEET METAL, ONE COMPONENT, LIQUID ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H697-K-2008 FABRIC, KRYTON PATTERN, WOVEN JACQUARD, HFW - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A368-A62-2012 STEEL, SHEET, COLD ROLLED, COMPLEX PHASE (CR MP) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M1A365-A22-2012 STEEL, SHEET, HOT ROLLED, LOW CARBON, IMPROVED FORMABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A365-A11)
FORD WSS-M98P14-A9-2014 PERFORMANCE OF UREA SCR MATERIALS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
FORD WSS-M1F26-A-2010 LEATHER, GENUINE, CHROME TANNED OR CHROME FREE TANNED, SUPPLE, MILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** (NOT FOR USE IN NORTH AMERICA)
FORD WSS-M2F178-A2-2013 FABRIC, VINYL COATED, ANTI-SQUEAK FINISH ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2F178-A1)
FORD WSS-M10A101-A3-2010 POWDER METAL, STAINLESS STEEL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M10A101-A1)
FORD WSS-M1H696-K-2008 FABRIC, SILVERSTONE PATTERN, WOVEN JACQUARD, HFW - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H694-K-2008 FABRIC, LIBERTY DESIGN, LIBA POLL, HFW - ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1H694-A)
FORD WSS-M33J10-B2-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET BASECOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B4, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M2A175-A3-2015 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, HIGH STRENGTH, LOW COPPER ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A175-A1)
FORD WSS-M1H690-G-2008 FABRIC, KAPPA PATTERN, WOVEN JACQUARD, HFW ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M8P3-E1-2009 PERFORMANCE, FLEXIBLE POLYMERIC FILM, INTERIOR QUALITY, UNSUPPORTED ***TO BE USED WITH FORD WSS-M99P1111-A*** [Replaced: FORD WSS-M8P3-D3, FORD WSS-M8P3-D3]
FORD WSS-M1A351-A2-2013 STEEL, SHEET, COLD ROLLED, TRIP ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A351-A1; No direct replacement, use CBP strategy)
FORD WSS-M4D985-A-2006 FLEXIBLE COVERSTOCK, SLUSH MOLDABLE POLYVINYL CHLORIDE (PVC), INSTRUMENT PANEL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A367-A21-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH BAKE HARDENABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A354-A-2013 COMPACTED GRAPHITE CAST IRON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M15P48-A-2010 SEAT PLASTIC COMPONENT/ASSEMBLY PERFORMANCE SPECIFICATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1C262-A-2008 GREASE, FLUOROSILICONE, PTFE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D627-A2-2010 POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2P109-B-2008 PAINT QUALITY, ALUMINUM WHEELS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1C229-A2-2008 GREASE-SILICON BASED LUBRICANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J10-B5-2013 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET TINTED CLEARCOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B2, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M1H695-G-2008 FABRIC, AVON III PATTERN, KNITTED, HFW - ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1H695-A)
FORD WSS-M1A341-A12-2009 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M1A341-A1
FORD WSS-M10A100-A1-2012 SINTERED IRON, CARBON, COPPER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H1016-B-2010 FABRIC, SPECK PATTERN, KNIT TREATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M7G8-A-2011 LABEL, INTERIOR QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M22P7-A2-2014 CABLE, PRIMARY LOW TENSION, THIN WALL, 100°C ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M22P7-A1)
FORD WSS-M99G117-C9-2021 ACTIVATED CARBON, PELLETS, LOW DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99G117-C5)
FORD WSS-M1A365-A20-2012 STEEL, SHEET, HOT ROLLED, LOW CARBON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J12-A4-2014 ENAMEL, 2-COMPONENT URETHANE, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET CLEARCOAT, PROCESSED WITH WSS-M33J12-A1/WSS-M33J12-A2, EXTERIOR-COMPOSED OF WSS-M33J12-A6/WSS-M33J12-A7 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J12-A1)
FORD WSS-M1H717-C1-2003 FABRIC, ARCO II PATTERN, WOVEN JACQUARD, 3 MM ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSS-M1H717-A
FORD WSS-M1H695-K-2008 FABRIC, AVON III PATTERN, KNITTED, HFW - ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1H695-A)
FORD WSS-M33J10-B5-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET TINTED CLEARCOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B2, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M33J10-A1
FORD WSS-M99P41-A32-2014 LABEL PERFORMANCE, PSA, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99P41-A10)
FORD WSS-M10A101-A2-2012 POWDER METAL, STAINLESS STEEL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M10A101-A1)
FORD WSS-M2C919-E-2004 FLUID, AUTOMATIC TRANSMISSION, FRICTION MODIFIED, RED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1F21-B-2007 SPLIT LEATHER, GENUINE, FINISHED, STEERING WHEEL - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2F207-A-2010 FABRIC, VINYL COATED (PVC) EXPANDED, CALENDERED WITH PROTEIN ENHANCED TOP COAT FINISH ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1C249-A-2008 GREASE, INORGANIC GELLED, SYNTHETIC HYDROCARBON, NLGI 1.0 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M10A69-C4-2009 SINTER-FORGED CARBON STEEL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M10A69-C1)
FORD WSS-M96D45-A-2010 HOSE, LOW PRESSURE, POWER STEERING RETURN ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J12-B6-2021 PART A - POLYOL COMPONENT, (3 WET AMBIENT FLASH PRIME) COMPLIANCE VOC, PROCESSED WITH WSS-M33J12-B7 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown On FORD WSS-M33J12-B1)
FORD WSS-M1A368-A72-2012 STEEL, SHEET, HOT ROLLED, COMPLEX PHASE (HR MP) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M1A365-A14-2012 STEEL, SHEET, COLD ROLLED, LOW CARBON, HIGH FORMABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A365-A11)
FORD WSS-M1H697-C1-2003 FABRIC, KRYTON PATTERN, WOVEN JACQUARD, 3MM ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSS-M1H697-A
FORD WSS-M99G117-C8-2014 ACTIVATED CARBON, GRANULAR (6x18) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99G117-C6)
FORD WSS-M1A341-A5-2013 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A341-A1; No direct replacement, use CBP strategy)
FORD WSS-M2P181-A-2008 PAINT PERFORMANCE, FLEXIBLE SUBSTRATES, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H992-A-2008 FABRIC, ATHENAS PATTERN, WOVEN JACQUARD, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2F204-A-2007 FABRIC, VINYL COATED (PVC) CAST/EXPANDED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A367-A23-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH BAKE HARDENABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M9P9-A-2009 DYNAMIC SEALING PERFORMANCE SPECIFICATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A367-A25-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH BAKE HARDENABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H117-A2-2009 CARPET, POLYPROPYLENE, NON-BACKCOATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2P187-A2-2010 PAINT PERFORMANCE, WATER BASED, AUTODEPOSITED, NON VISIBLE EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M21P27-A4-2009 SUBSEQUENT TREATMENTS FOR FASTENER SURFACE FINISHES ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M21P27-A1)
FORD WSS-M7G7-B2-2011 LABEL, HOT STAMP TRANSFER - INTERIOR QUALITY, RIGID SUBSTRATES ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H834-A-2015 FABRIC, STARBOARD PATTERN, KNIT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1C270-A-2008 GREASE, NLGI GRADE 2, PARK BRAKE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J12-A2-2014 ENAMEL, WATERBORNE, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET BASECOAT PROCESSED WITH WSS-M33J12-A1/WSS-M33J12-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J12-A1)
FORD WSS-M1H698-K-2008 FABRIC, KRYPTON PATTERN, WEFT KNITTED, HFW - ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1H698-A)
FORD WSS-M33J12-A5-2014 ENAMEL, 2-COMPONENT URETHANE, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET TINTED CLEARCOAT, PROCESSED WITH WSS-M33J12-A1/WSS-M33J12-A2, EXTERIOR-COMPOSED OF WSS-M33J12-A6/WSS-M33J12-A7 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J12-
FORD WSS-M1C268-A-2008 SOLID LUBRICANT PASTE, ENGINE CON ROD ASSEMBLY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99P2222-D1-2013 ENGINEERING MATERIAL SPECIFICATION - WSS-M99P2222 – D1/C4
FORD WSS-M17H172-A-2006 PADDING, THERMOPLASTIC FIBER BONDED, RANDOM AIR LAID, 50 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J12-A1-2014 ENAMEL, WATERBORNE, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET PRIMER, PROCESSED WITH WSS-M33J12-A2/WSS-M33J12-A4, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D500-A2-2009 POLYURETHANE FOAM, CLOSED CELL, HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A340-A2-2007 STEEL, FORGING, AIR COOLED MEDIUM CARBON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J10-A3-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET MIDCOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A2/WSS-M33J10-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M1A368-A53-2012 STEEL, SHEET, COLD ROLLED, TRIP (CR TR) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M99P23-C2-2013 MATERIAL CONTROL, GRAY BOX COMPONENTS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99P23-C1)
FORD WSS-M1A368-A23-2012 STEEL, SHEET, COLD ROLLED, DUAL PHASE (CR DP LOW/HIGH YIELD) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M1C248-A-2008 GREASE, INORGANIC GELLED, SYNTHETIC HYDROCARBON, NLGI 2.0 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1C254-A-2008 GREASE, SYNTHETIC HYDROCARBON, DAMPING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A177-A5-2014 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, STRUCTURAL, ENERGY ABSORBSION ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A177-A1)
FORD WSS-M1C260-A-2008 GREASE, SYNTHETIC HYDROCARBON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A174-A2-2014 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, ENHANCED BAKE RESPONSE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A174-A1)
FORD WSS-M1F30-A-2010 LEATHER, SPECIALITY, FULL GRAIN, ANILINE, CHROME TANNED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C204-A-2009 FLUID, POWER ASSISTED STEERING, EXTENDED TEMPERATURE RANGE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M15P45-A-2009 PERFORMANCE, INSTRUMENT PANEL ASSEMBLY, FLEXIBLE COVER SKIN MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H67-B-2008 MAT, POLYESTER NONWOVEN, FLAT NEEDLED, NON-BACKCOATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A368-A14-2012 STEEL, SHEET, COLD ROLLED, DUAL PHASE (CR DP) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M98P12-B-2010 STEERING WHEEL MATERIAL PERFORMANCE SPECIFICATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1C252-A-2008 GREASE, POLYUREA, PTFE, LOW TEMPERATURE, NLGI 2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D496-A8-2004 POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D952-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED, REACTOR GRADE MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D952-A2, and WSS-M4D952-A3)
FORD WSS-M2C913-C-2012 OIL, ENGINE, INITIAL AND SERVICE FILL, SAE 5W-30 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1F29-A2-2010 LEATHER, GENUINE, CHROME FREE TANNED, SUPPLE, MILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1F29-A1; NOT FOR USE BY FORD, NORTH AMERICA)
FORD WSS-M33J10-A5-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET TINTED CLEARCOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A2, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M8P20-A-2010 CONVERTIBLE TOP PERFORMANCE SPECIFICATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99P41-A11-2014 LABEL PERFORMANCE, SEWN IN ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99P41-A10)
FORD WSS-M15P34-C2-2011 PERFORMANCE, INTERIOR TRIM APPLIQUES, LOW WEAR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M15P34-C1)
FORD WSS-M99P41-A52-2008 LABEL PERFORMANCE, HEAT APPLIED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M99P41-A10
FORD WSS-M1C264-A-2008 GREASE, LITHIUM BASE, SEMI-SYNTHETIC ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99P23-B-2007 MATERIAL CONTROL, BLACK/GREY BOX PROGRAMS - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J12-A3-2014 ENAMEL, WATERBORNE, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET MIDCOAT, PROCESSED WITH WSS-M33J12-A1/WSS-M33J12-A2/WSS-M33J12-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J12-A1)
FORD WSS-M1C265-A1-2008 GREASE, LITHIUM BASE, SYNTHETIC ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A348-A5-2013 STEEL, SHEET, COLD ROLLED, DUAL PHASE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A348-A1; No direct replacements, use CBP strategy)
FORD WSS-M33J12-A7-2014 PART B - ISO COMPONENT, (3WET) COMPLIANCE VOC, PROCESSED WITH WSS-M33J12-A6 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J12-A1)
FORD WSS-M33J10-B4-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET CLEARCOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B2, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M1C255-A1-2008 GREASE, SYNTHETIC, ELECTRICAL SWITCH ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A171-A2-2009 DIE CAST ALUMINUM ?MEDIUM DUTY APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A171-A1
FORD WSS-M1A367-A36-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M2A175-A2-2015 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, HIGH STRENGTH, THICK GAGE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A175-A1)
FORD WSS-M15P44-A-2008 THROW IN MAT ASSEMBLIES, CARPETED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A178-A2-2015 ALUMINUM CASTING ALLOY, CYLINDER HEAD, NORMAL DUTY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A178-A1)
FORD WSS M9G21-A-2007
FORD WSS-M4D649-A3-2008 POLYETHYLENE (PE) FOAM, CHEMICALLY CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J12-B5-2021 ENAMEL, 2-COMPONENT URETHANE, (3 WET AMBIENT FLASH PRIME) COMPLIANCE VOC, HIGH SOLIDS THERMOSET TINTED CLEARCOAT, PROCESSED WITH WSS-M33J12-B1/WSS-M33J12-B2, EXTERIOR-COMPOSED OF WSS-M33J12-B6/WSS-M33J12-B7 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown
FORD WSS-M1A368-A32-2012 STEEL, SHEET, HOT ROLLED, DUAL PHASE (HR DP) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M4D1051-A2-2012 POLYCARBONATE, GENERAL PURPOSE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4D1051-A1
FORD WSS-M33J12-B7-2021 PART B - ISO COMPONENT, (3 WET AMBIENT FLASH PRIME) COMPLIANCE VOC, PROCESSED WITH WSS-M33J12-B6 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J12-B1)
FORD WSS-M99P41-A42-2006 LABEL PERFORMANCE, PSA, TAMPER-EVIDENT, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown On WSS-M99P41-10 [Replaced By: FORD WSS-M99P34-A2, FORD WSS-M99P34-A2, FORD WSS-M99P34-A2, FORD WSS-M99P34-A2] [Replaced: FORD WSS-M99P34-A3, FORD WSS-M99P34
FORD WSS-M2P180-A-2008 PAINT PERFORMANCE, RIGID SUBSTRATES, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J10-A4-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET CLEARCOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A2, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M33J10-A1)
FORD WSS-M2A175-A5-2015 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, OVERAGED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A175-A1)
FORD WSS-M15P4-E-2009 INTERIOR TRIM, ASSEMBLY PERFORMANCE SPECIFICATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M98P13-A-2008 EXTERIOR PLASTIC PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M97B52-A-2007 ACETIC ACID - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A368-A12-2012 STEEL, SHEET, COLD ROLLED, DUAL PHASE (CR DP) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A175-A2-2013 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, HIGH STRENGTH, THICK GAGE ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A175-A1
FORD WSS-M3P36-A2-2013 PHOSPHATE COATING, HEAVY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on Ford WSS-M3P36-A1)
FORD WSS-M1C251-A-2008 GREASE, POLYUREA, SYNTHETIC OIL, PTFE, LOW TEMPERATURE, NLGI 2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99P41-A42-2008 LABEL PERFORMANCE, PSA, SECURITY FEATURE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M99P41-A10
FORD WSS-M1A368-A82-2012 STEEL, SHEET, COLD ROLLED, MARTENSITIC (CR MS) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M33J12-B3-2021 ENAMEL, WATERBORNE, (3 WET AMBIENT FLASH PRIME) COMPLIANCE VOC, HIGH SOLIDS THERMOSET MIDCOAT, PROCESSED WITH WSS-M33J12-B1/WSS-M33J12-B2/WSS-M33J12-B4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown On FORD WSS-M33J12-B1)
FORD WSS-M1A368-A61-2012 STEEL, SHEET, COLD ROLLED, COMPLEX PHASE (CR MP) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A368-A11)
FORD WSS-M1A347-A3-2013 STEEL, SHEET, COLD ROLLED HSLA ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A347-A1; No direct replacements, use CBP strategy)
FORD WSS-M1F28-A2-2010 LEATHER, GENUINE TOP GRAIN, PREMIUIM SOFTNESS, MILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1F28-A1)
FORD WSS-M1A367-A13-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH SOLID SOLUTION STRENGTHENED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M7H57-A5-2020 HIGH STRENGTH, HIGH ELONGATION ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M7H57-A1)
FORD WSS-M15J13-A-2008 PAINT, TWO COMPONENT COLOR COAT FOR PLASTIC, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M33J10-A1-2010 ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET PRIMER, PROCESSED WITH WSS-M33J10-A2/WSS M33J10-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99P43-A-2010 PERFORMANCE, LEATHER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M15P34-B2-2005 PERFORMANCE, INTERIOR TRIM APPLIQUES, LOW WEAR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M8P23-A-2010 MOONROOF PERFORMANCE SPECIFICATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D926-A2-2010 POLYCARBONATE (PC), IMPACT MODIFIED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

Others: WSS,wss standard,wss standard,tv wss,specification to,ford wss,specification fl,wss specification,Acceptance specification,Specifications,Norm flow,norm cu,norm he,specification san,Monitoring specification,tv wss,paper specification,wss ford,wss-