dimer acrylic acid

dimer acrylic acid, Total:431 items.

The international standard classification for "dimer acrylic acid" includes: Chemicals for purification of water , Thermoplastic materials , Rubber and plastics products in general , Rubber , Surface active agents , Plastics pipes , Adhesives , Plastics , Aliphatic hydrocarbons , Alcohols. Ethers , Other products of the chemical industry , Other standards related to water quality , Man-made fibres , Textiles in general , Acid secondary cells and batteries , Tobacco, tobacco products and related equipment .

The Chinese standard classification for "dimer acrylic acid" includes: Water treatment agent , Synthetic rubber , Synthetic resin and plastic , Daily use plastic products , Hygiene, safety and labor protection , Plastic profile , Adhesives , Basic standards and general methods for synthetic resin and plastic , General organic chemicals , Chemical fibre , Technology , Half finished chemical fibre products , Electrical energy storage device , Tobacco curing in general .

Group Standards of the People's Republic of China

T/QGCML 1091-2023 Sodium polyacrylate production equipment
T/SACE 029-2022 Propylene Glycol Diacetate (Propylene Glycol Diacetate)
T/CASME 1581-2024 General specification for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) low-voltage intelligent energy metering boxes
T/HEBQS 014-2023 Polymethyl methacrylate (PMMA) waterproof coating
T/SHPTA 081-2024 Post-consumption recycling polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS-PCR) special material for consumer electronics
T/CSTM 00508-2021 Chain extender—2-Propenoic acid, 2-methyl-,oxiranylmethyl ester, methyl
T/GDPIA 51-2022 Anti-squeaking PC/ABS material for automotive interiors
T/QGCML 3066-2024 Industrial grade non-food sodium polyacrylate
T/SDHCIA 021-2022 Mixted solution of acrylic acid dimer and acrylic acid
T/DLSHXH 004-2017 High solid acrylic polyurethane topcoat
T/HEBQIA 121-2022 1,3-Dichloropropene
T/CPCIF 0136-2021 2-Hydroxyethyl methacrylate，Hydroxypropyl methacrylate（mixture of 2-hydroxypropyl and 2-hydroxy-1-methylethyl methacrylate）& Hydroxypropyl acrylate（mixture of 2-hydroxypropyl and 2-hydroxy-1-methylethyl acrylate）for industrial use
T/NXCIA 001-2019 Water base acrylic acid/polyurethane coating
T/CASME 20-2022 Acrylic acid and acrylate dispersants for paper making
T/CPCIF 0320-2023 Sodium acrylate by-produced in acrylic esters production
T/CSRA 21-2022 Determination of plastic composition—Qualitative method of PE,PP,PS,PVC,EVA,PET in plastics
T/SDSCCE 027-2022 Potassium Acrylate
T/GDID 1085-2023 Polymethyl methacrylate (PMMA) bathtub
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/HBTL 011-2020 Polyurethane/Polyacrylate Latex Interpenetrating Network Polymer Emulsion
T/SDSCCE 059-2024 Poly(pentabromobenzyl acrylate) by-product sodium bromide
T/SDAS 723-2023 1,3-Dichloropropene
T/ZZB 2983-2022 Ethyl 3-(N,N-dimethylamino)acrylate
T/SHPTA 066-2023 Plastics-Modified Polycarbonate / acrylonitrile-butadiene-styrene (PC / ABS) material for vehicle

Professional Standard - Petrochemical Industry

SH 2604.06-2003 Water treatment chemicals - Acrylic acid - acrylate series copolymer
SH 2604.10-2003 Water treatment chemicals - Polymers containing AMPS
SH 2604.04-2003 Water treatment chemicals - Polyacrylic acid/sodium polyacrylate
SH/T 1751-2005 Determination of ethylene units in ethylene-propylene copolymer (EPM) and ethylene-propylene-diene terpolymers (EPDM)

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1456-2014 Acrylic and polybutadiene anodic electrocoats

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T　17530.5-1998 Determination of polymerization inhibitor in industrial acrylic acid and ester
GB/T 2546-1988 Designation of polyproylene and propylene copoymer materials
GB/T 15597-1995 Polymethyl methacrylate (PMMA) moulding materials
GB/T 17530.5-1998 Acrylic acid and acrylate esters for industrial use - Determination of monomethyl ether of hydroquinone
GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride)(PVC - C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-styrene-acrylester (ASA) f
GB/T 33085-2016 Water treatment chemicals一Poly(diallyldimethyIammonium chloride)
GB/T 26690-2011 Acrylic coated biaxially oriented polypropylene film
GB/T 31403-2015 Plastics―Acrylonitrile-butadiene-styrene/poly(methyl methacrylate) alloy
GB/T 24797.3-2014 Film for wrapping rubber bales―Part 3:Ethylene-propylene-diene rubber(EPDM),acrylonitrilebutadiene rubber(NBR),hydrogenated nitrile-butadiene rubber(HNBR),acrylic-ethylene rubber(AEM) and acrylic rubber(ACM)
GB 29948-2013 National Food Safety Standard Food Additive Identification Allyl disulfide Food Additive Identification Sodium polyacrylate
GB/T 10533-2000 Water treatment chemicals-Polyacrylic acid
GB/T 42790-2023 Acrylic ester / vinyl chloride graft co-polymer resin
GB/T 17530.5-1998 Acrylic acid and acrylate esters for industrial use - Determination of monomethyl ether of hydroquinone
GB/T 10533-2014 Water treatment chemicals—Polyacrylic acid
GB/T 30778-2014 Polyvinyl acetate-acrylate mulsion adhesive for the laminating of paper/polymer films at room temperature
GB/T 29641-2013 Poly(methyl methacrylate) (PMMA) cast noise barriers

Professional Standard - Agriculture

2257药典二部-2010 Part II Seventeen Drawings Acrylic IV
722兽药典一部-2015 Variety of the text part two fourteen strokes polyammonium methacrylate Ⅱ
720兽药典一部-2015 Variety of Text Part Two Fourteen-stroke Polyacrylic Resin IV
2259药典二部-2010 Part 2 Seventeen strokes polyammonium methacrylate II
718兽药典一部-2015 Types of Text Part Two Fourteen-stroke Polyacrylic Resin II
2258药典二部-2010 Part II Seventeen strokes polyammonium methacrylate I
409药典四部-2015 Pharmaceutical Excipient Product Name Wuhua Ethyl Acrylate-Methyl Methacrylate Copolymer Aqueous Dispersion
549兽药典一部-2015 The second part of the main text variety five-paint ethyl acrylate-methyl methacrylate copolymer aqueous dispersion
2255药典二部-2010 Part Two Seventeen Drawings Acrylic II
719兽药典一部-2015 Types of Text Part Two Fourteen-stroke Polyacrylic Resin III
721兽药典一部-2015 Text Variety Part Two Fourteen Frames Polyammonium Methacrylate Ⅰ
2256药典二部-2010 Part Two Seventeen Paintings Acrylic III
T/CAFFCI 36-2019 Propanoic acid, 2-methyl,1,3-dimethyl-3-butenyl ester （Isopentyrate）
451药典四部-2020 Pharmaceutical Excipient Product Name Wuhua Ethyl Acrylate-Methyl Methacrylate Copolymer Aqueous Dispersion

Professional Standard - Chemical Industry

HG/T 4947~4948-2016 Cosmetic ingredients-Lauryl phosphate
HG/T 2429-2014 Water treatment chemicals. Acrylic acid-Acrylates copolymer
HG/T 5471～5473-2018 Methyl Methacrylate, Butadiene, Styrene Terpolymer (MBS) Resins, Triallyl Isocyanurate and Polyethylene Oxide (2018)
HG/T 3642-2016 Water treatment chemicals-Acrylic acid-2-acrylamido-2-methylpropanesulfomic acid copolymers
HGB 3538-1962 Diethyl malonate
HG/T 2229-2009 Water treatment chemicals - Maleic anhydride - Acrylic acid copolymer
HG/T 2429-2006 Water treatment chemicals - Acrylic acid - Acrylates copolymer
HG/T 2229-1991 Water treatment chemicals maleic acid and acrylic acid copolymers
HG/T 2643-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) diaphragm valve
HG/T 2429-1993 Water treatment agent acrylic acid-acrylic ester copolymer
HG/T 6187~6188-2023 Polypropylene dryer and polypropylene copolymerization reactor
HG/T 2737-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) ball valve
HG/T 2838-1997 Water treatment chemicals-Sodium polyacrylate
HG/T 3642-1999 Water treatment chemicals - Acrylic acid-2 - Acrylamido-2 - Methyl - Propane - Sulfomic acid copolymers
HG/T 4309-2012 Polypropylene Glycol
HG/T 2229-2018 Water treatment chemicals-Malefic anhydride-acrylic acid copolymer
HG/T 2838-2010 Water treatment chemicals－Sodium polyacrylate

工业和信息化部

HG/T 6076-2022 Allyl alcohol polyoxypropylene ether
HG/T 5471-2018 Resin methyl methacrylate-butadiene-styrene (MBS)
HG/T 4948-2016 Tripropylene glycol diacrylate for photosensitive materials
HG/T 2838-2018 Water treatment chemicals-Sodium polyacrylate
QB/T 5481-2020 Detergent additive sodium polyacrylate
HG/T 5089-2017 Silicone defoaming agent for polyacrylic acid sizing
SH/T 1814-2020 Determination of vanadium content in ethylene- -propylene copolymer( EPM) and ethylene- -propylene- -diene terpolymers( EPDM)
HG/T 4309-2022 Polypropylene glycol

Military Standard of the People's Republic of China-General Armament Department

GJB 2050-1994 Specification for carboxyl-terminated polybutadiene acrylonitrile
GJB 2050A-2020 Specification for carboxyl-terminated polybutadiene acrylonitrile

未注明发布机构

DIN EN ISO 19065-2 E:2018-03 Plastics Acrylonitrile Styrene Acrylate (Draft)
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
DIN EN 13559 E:1999-08 Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes
DIN EN ISO 19066-2 E:2019-04 Plastic Methyl Methacrylate Acrylonitrile Butadiene Styrene (Draft)

Professional Standard - Light Industry

QB/T 3650-1999 Moulding Compound for Methyl Methyacrylate Copolymerization
QB/T 2029-1994 ABS/PVC Sheet Material
QB/T 4634-2014 Bread Bags Made of Polypropylene (PP) Film or Biaxially Oriented Polypropylene (BOPP) Film

Professional Standard - Urban Construction

CJ/T 218-2010 Pipe and fittings of Acrylic ester/vinyl chloride graft co-polymer resin for water supply
CJ/T 218-2005 Pipe and fittings of Acrylic ester/vinyl chloride graft co-polymer resin for water supply

Professional Standard - Textile

FZ/T 15002-2011 Polyacrylic sizes used in textile warp sizing
FZ/T 54019-2009 Polytrimethylene terephthalate drawn yarns
FZ/T 54020-2009 Polytrimethylene terephthalate drawn textured yarns
FZ/T 53005-2015 Polytrimethylene terephthalate top
FZ/T 52045-2016 Colored Polypropylene Terephthalate (PTT) Staple Fiber
FZ/T 54021-2009 Polytrimethylene terephthalate partially oriented yarns
FZ/T 52031-2014 Polytrimethylene terephthalate staple fiber
FZ/T 52045-2017 Dope-dyed polytrimethylene terephthalate staple fiber
FZ/T 51010-2014 Fiber grade polyethylene terephthalate chips (PTT)
FZ/T 15002-2020 Polyacrylic sizes used in textile warp sizing
FZ/T 54041-2011 Polytrimethylene terephthalate/Polydimethylene terephthalate (PTT/PET) co-elastic yarns
FZ/T 54112-2019 Polytrimethylene terephthalate bulked continuous filament yarns(BCF)
FZ/T 54094-2017 Polytrimethylene terephthalate/Polydimethylene terephthalate(PTT/PET) composite drawn yarn
FZ/T 54141-2023 Pol ytri methyl ene terephthal ate/Pol ydi methyl ene terephthal ate (PTT/PET) composi te parti al l y ori ented yarns
FZ/T 52031-2013 Polypropylene terephthalate (PTT) staple fiber
FZ/T 54051-2012 Dope-dyed polyterephthalate-1,3-propanediol ester(PTT)drawn yarns

Taiwan Provincial Standard of the People's Republic of China

CNS 3272-1977 Polymethylmethacrylate Corrugated Sheet
CNS 3273-1977 Method of Test for Polymethlmethacrylate Corrugated Sheet
CNS 13546-1995 Polymethyl Methacrylate Moulding Materials
CNS 2637-1984 Polymethyl Acrylate Resin Treated Waterproof Nylon Cloth

国家能源局

SH/T 1814-2017 Determination of vanadium in ethylene-propylene copolymer (EPM) and ethylene-propylene-diene terpolymer (EPDM) spectrophotometrically

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39710-2020 Polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) material for charging spot housing of electric vehicle

化学工业部

HG 2229-1991 Water treatment agent maleic anhydride-acrylic acid copolymer

Professional Standard - Machinery

JB/T 7630.4-1998 Melt-blown polyvinylchloride separator for lead acid storage batteries
JB/T 7630.4-2008 Melt-spray polypropylene separators for lead-acid batteries

Professional Standard - Tobacco

YC/T 410-2011 Determination of acrylic acid and methacrylic acid in water-borne adhesives applied on polypropylene tow for making cigarette filter rod—High performance liquid chromatographic method

Professional Standard - Commodity Inspection

SN/T 1901-2014 Fiber identification for export and import textiles - Polyester fiber (polylactic acid|| polytrimethylene terephthalate and polybutylene terephthalate)

Fujian Provincial Standard of the People's Republic of China

DB35/T 1641-2017 Acrylonitrile-styrene-acrylate terpolymer (ASA) synthetic resin tile technical conditions

Professional Standard - Building Materials

JC/T 2251-2014 Polymethyl methacrylate coating for waterproofing

Professional Standard - Aerospace

QJ 1597-1989 General process of acrylic polyurethane enamel coating

GM Europe

GME QK 001244-1998 Acrylnitril-Butadien-Styrol-Terpolymerisat Methylmethacrylate-Acrylonitrile-Butadiene-Styrene-Polymer English Translation Available
GME QK 000626-2007 Blend from PBT and ASA with glass fibers Blend from PBT and ASA with Glass Fibers English/German
GME QK 000638-2005 Blends of polybutylene terephthalate (PBT) and acrylic-styrene-acrylonitrile copolymer (ASA) with glass fibers English/German
GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
GME QK 000642-2005 Blend from PBT and ASA with glass fibers Blend from PBT and ASA with Glass Fibers English/German
GME QK 000633-2007 Blends of polybutylene terephthalate (PBT) and acrylic-styrene-acrylonitrile copolymer (ASA) with glass fibers English/German
GME QK 000637-2005 Blend from PBT and ASA with Glass Fibres (English/German)
GME QK 000642-2010 Blend from PBT and ASA with Glass Fibres (Issue 3; English/German)
GME QK 000626-2010 Blend from PBT and ASA with Glass Fibres (Issue 4; English/German)
GME QK 000221-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
GME QK 001909-2007 Blend from PBT and ASA with glass fibers Blend from PBT and ASA with Glass Fibers English/German
GME QK 000220-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
GME QK 002500-2006 Reinforced blend of acrylonitrile-butadiene-styrene copolymer (ABS) and acrylic-styrene-acrylonitrile (ASA) English/German
GME QK 000023-1987 Ethylen-Acryls鋟re-Copolymerisat Ethylene-Acrylic Acid-Copolymer German
GME QK 000195-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German
GME QK 000227-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German
GME QK 000188-2003 Blend from PC and ABS Blend from PC and ABS English/German
GME QK 001955-2003 Blend from ABS and PC Blend from ABS and PC English/German
GME QK 000530-1996 Polymethylmethacrylat, modifiziert Polymethyl Methacrylate, Modified English/German
GME QK 000216-2005 Blend from ABS and PC (English/German)
GME STD 518654-1994 Plastic 8654 ASA+PC Plast 8654 ASA+PC English/Swedish
GME QK 001961-2005 Blend from ABS and PC Blend from ABS and PC English/German
GME QK 000195-2010 Blend from PC and ABS (English/German)
GME QK 000230-1996 ASA + PC - Blend ASA + PC - Blend English/German
GME QK 000242-2009 Acrylic Ester-Styrene-Acrylonitrile-Terpolymer (English/German)
GME QK 000172-2005 Acrylate-Styrene-Acrylonitrile Terpolymer English/German
GME TM 412200-1996 ASA-Folie ASA-Foil English/German
GME QK 000234-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English/German
GME QK 000974-2008 Polypropylene/ethylene propylene diene rubber blend.English/Germany
GME QK 000230-2010 ASA + PC - Blend (Issue 3; English/German)
GME QK 000231-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German [Replaced: GME QK 000215]
GME QK 000228-1987 ABS/PC - Blend mit Glasfasern ABS/PC - Blend with Glass Fibres German
GME QK 000657-2010 Blends of polybutylene terephthalate (PBT) and styrene-acrylonitrile copolymer (SAN). 2nd edition. English/German
GME TM 410100-1982 ABS/PVC-Folie ABS/PVC-Foil German
GME STD 518755-1997 Plastic 8755 PVC/ABS Plast 8755 PVC/ABS English/Swedish
GME TM 410900-1986 ABS/PVC-Folie ABS/PVC-Foil German
GME TM 410300-1974 ABS/PVC - Folie ABS/PVC - Foil German
GME QK 000234-2010 Acrylate-styrene-acrylonitrile terpolymer English/German. 3rd edition
GME QK 000226-2010 Acrylate-styrene-acrylonitrile terpolymers. 3rd edition English/German
GME TM 410800-1986 ABS/PVC-Folie ABS/PVC-Foil German
GME QK 001952-2003 ABS ABS English/German
GME QK 000243-2010 Acrylate-styrene-acrylonitrile terpolymer. 1st edition. English/German
GME QK 001956-2003 ABS ABS English/German
GME QK 001954-2003 Blend from ABS and PC with glass fibers Blend from ABS and PC with Glass Fibers English/German
GME QK 000262-1996 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene-Styrene Terpolymer English/German
GME QK 001951-2003 ABS ABS English/German
GME TM 411300-1976 ABS-Folie ABS-Foil German
GME QK 001249-1993 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene Styrene-Terpolymer English/German
GME QK 000531-2004 Polymethyl Methacrylate (English/German)
GME QK 001951-2009 Acrylnitril-Butadien-Styrol Terpolymerisat Acrylonitrile-Butadien-Styrene Terpolymer English/German
GME QK 000273-1996 Acrylnitril-Butadien-Styrol Terpolymerisat Acrylonitrile-Butadiene-Styrene-Terpolymer English/German
GME TM 412100-1996 ABS/PVC-Folie ABS/PVC-Foil English/German
GME TM 411700-1996 ABS/PVC-Folie ABS/PVC-Foil English/German
GME QK 001251-1991 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene-Styrene-Terpolymer English/German
GME QK 000023-2011 Ethylene-Acrylic Acid Copolymer (Rev. 4; English/German)
GME QK 003200-1998 Polymethyl methacrylate (PMMA) English/German
GME QK 000976-2008 Polyacrylat Elastomer Polyacrylate Elastomer English/German
GME TM 411500-1981 ABS/PVC-Folie ABS/PVC-Foil German; Includes Appendix
GME TM 410700-1974 ABS/PVC-Folie ABS/PVC-Foil German; Includes Appendix
GME QK 000975-2008 Polyacrylat Elastomer Polyacrylate Elastomer English/German
GME STD 518852-1998 Plastic 8852 PE/PMMA Plast 8852 PE/PMMA English/Swedish
GME QK 000302-1983 ABS-PVC-Formmasse (Regenerat) ABS-PVC-Compound (Regenerated Material) German
GME QK 000657-2007 Blend from PBT and SAN with Glass Fibers Blend from PBT and SAN with Glass Fibers English/German
GME QK 000226-1996 Acrylester-Styrol-Acrylnitril-Copolymerisat Acrylic Ester-Styrene-Acrylonitrile-Copolymer English/German [Replaced: GME QK 000220, GME QK 000220]
GME QK 000979-2008 Blend from Polypropylene and EPR (English/German)
GME QK 001059-2004 Polypropylene Copolymer (English/German)
GME QK 001271-2010 Mixtures of polyamide 6 and acrylonitrile-styrene-acrylate (Issue 1; English/German)
GME QK 000269-1999 Acrylonitrile-Butadiene-Styrene Copolymer (ABS) Molding Compound English/German
GME QK 001246-1984 ABS/PVC-Blend (Revision 2; English/German; This standard may be applied only for current programs. It is inactive for all future projects and without replacement. If this product should be used for a new project, a Re-Certification according to GMW15702 i
GME QK 000301-1983 ABS-PVC-Compound Folienmaterial ABS-PVC-Compound Foil Material German
GME STD 518731-1995 Plastic 8731 ABS Plast 8731 ABS English/Swedish
GME STD 518743-1998 Plastic 8743 ABS Plast 8743 ABS English/Swedish
GME QK 000288-2005 ABS-Moulding Compound (English/German)
GME QK 000317-1983 ABS-Formmasse ABS-Moulding Compounds English/German
GME QK 000529-1989 Polymethylmethacrylat, modifiziert Polymethyl Methacrylate, Modified English/German
GME QK 000973-2008 Blend from Polypropylene and EPR Blend from Polypropylene and EPR English/German
GME STD 518739-2002 Plastic 8739 ABS+PA6 Plast 8739 ABS+PA6 English/Swedish
GME QK 001248-1988 ABS/PVC-Blend ABS/PVC-Blend English/German
GME STD 518361-2001 Plastic 8361 ABS Plast 8361 ABS English/Swedish

GM Daewoo

GMKOREA EDS-M-4644-2012 Acrylonitrile Butadiene Styrene Copolymer / Polycarbonate Blend (III)
GMKOREA EDS-M-5761-2014 Polycarbonate, polybutylene terephthalate, and acrylonitrile butadiene styrene copolymer blend (Version 6; English/Korean)
GMKOREA EDS-M-4308-2012 Acrylonitrile-styrene-acrylate copolymer
GMKOREA EDS-M-5762-2014 Blow molded polycarbonate, polybutylene terephthalate, and acrylonitrile butadiene styrene copolymer blend (Version 4; English/Korean)
GMKOREA EDS-M-4642-2012 Acrylonitrile Butadiene Styrene Copolymer / Polycarbonate Blend for Metal Plating
GMKOREA EDS-M-4315-2012 Blow molding acrylonitrile-butadiene-styrene copolymer
GMKOREA EDS-M-4309-2012 Weather Resistant Acrylonitrile-Butadiene- Stylene Copolymer
GMKOREA EDS-M-4301-2012 Heat Resistance Acrylonitrile- Butadiene-Styrene Copolymer
GMKOREA EDS-M-5135-2012 Polyamide 6 / Acrylonitrile- Butadiene-Styrene Copolymer Blend
GMKOREA EDS-M-4305-2012 Matt acrylonitrile-butadiene-styrene copolymer
GMKOREA EDS-M-4325-2012 10% Talc Filled Acrylonitrile- Butadiene-Styrene Copolymer
GMKOREA EDS-M-4626-2014 Polypropylene and Styrene Butadiene Styrene Copolymer Blend (Version 10; English/Korean)
GMKOREA EDS-M-4303-2012 Heat resistance and impact strength Acrylonitrile-butadiene-styrene copolymer
GMKOREA EDS-M-4201-2012 ?????? ???? Polypropylene Copolymer Version 18; English/Korean

British Standards Institution (BSI)

BS ISO 20299-3:2008 Film for wrapping rubber bales - Ethylene-propylene-diene rubber (EPDM), acrylonitrile- butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS 2690-15:1974 Methods of testing water used in industry - Free EDTA, total salts of EDTA, polyacrylate and polymethacrylate
BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 2507-3:2017 Thermoplastics pipes and fittings. Vicat softening temperature.Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
BS 6747:1987 Specification for orthodontic resins
BS EN 60684-3-420 to 422:2002 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Polyethylene terephthalate textile sleeving with acrylic based coating - Sheets 420 to 422: Polyethylene terephthalate textile with acrylic-base
BS 2690-15:1974(1999) Methods of testing Water used in industry — Part 15 : Free EDTA, total salts of EDTA, polyacrylate and polymethacrylate
BS EN ISO 19065-2:2019 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Preparation of test specimens and det...
BS EN 12423:1999 Polypropylene twines
BS ISO 16152:2005 Plastics - Determination of xylene-soluble matter in polypropylene
BS EN 1408:2008 Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)
BS ISO 16565:2013 Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylenepropylene-diene (EPDM) terpolymers

International Organization for Standardization (ISO)

ISO 20299-3:2008 Film for wrapping rubber bales - Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
ISO 2507-3:1995 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 16565:2002 Rubber - Determination of 5-ethylidenenorbonene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 16565:2008 Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
ISO 12092:2000 Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure - R
ISO 16152:2005 Plastics - Determination of xylene-soluble matter in polypropylene
ISO 16565:2013 Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers

US-AAMA

AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends

TH-TISI

TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)
TIS 655.2-2011 Plastic utensils for food.part 2: poly (vinyl chloride) polycarbonate polyamide and poly (methyl methacrylate)

American Society for Testing and Materials (ASTM)

ASTM D4415-91(2000)e1 Standard Test Methods for Determination of Dimer in Acrylic Acid
ASTM D4802-01 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4415-91(1996)e1 Standard Test Methods for Determination of Dimer in Acrylic Acid
ASTM D3594-93 Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D3594-93(2000) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D4415-05 Standard Test Methods for Determination of Dimer in Acrylic Acid
ASTM D3594-93(2006) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D3594-93(2013) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D4802-10 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4802-94 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4802-16 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4802-02 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4802-15 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D4094-00 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
ASTM D3548-99 Standard Specification for Ethyl Acrylate
ASTM D2680-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D6047-17 Standard Test Methods for Rubber, Raw&x2014Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D2680-01(2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D2282-99 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
ASTM D6047-99(2009) Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D2680-95a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D6047-99(2014) Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D6047-99(2003) Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D2282-99e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
ASTM D6047-15 Standard Test Methods for Rubber, Raw&x2014Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D4094-07 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers

RO-ASRO

STAS 10024-1975 ACRYLONITRILE- BUTADIENE - STYRENE COPOLYMER
STAS 7507-1987 METHYL POL YMETHACR YLATE PLATES

GM Global

GMW 15582-2013 Acrylonitrile Butadiene Styrene and Polycarbonate Blend, Filled Issue 2; English

SCC

AWWA B451-2023 Poly(Diallyldimethylammonium Chloride)
AWWA B451-2016 Poly(Diallyldimethylammonium Chloride)
ASTM D4802-01a Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
HOLDEN HN 2411-2004 ACRYLONITRILE BUTADIENE STYRENE (ABS) AND POLYAMIDE 6 ALLOYS
HOLDEN HN 2411-2012 Acrylonitrile Butadiene Styrene ABS and Polyamide 6 Alloys
07/30161577 DC BS ISO 20299-3. Film for wrapping rubber bales. Part 3. Ethylene-propylene-diene rubber (EPDM), acrylonitrile- butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
SAE AMSA8576-1997 Adhesive, Acrylic Base, for Acrylic Plastic
MIL MIL-I-10903-1951 ISOBUTYL METHACRYLATE POLYMER, AE
DANSK DS/EN 12423:1999 Polypropylene twines
AENOR UNE-EN 12423:1999 Polypropylene twines
HOLDEN HN 1673-2008 BASE COAT / CLEAR COAT ENAMEL TOPCOAT (ACRYLIC / ACRYLIC)
NS-EN 12423:1999 Polypropylene twines
BS ISO 16565:2002 Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
HOLDEN HN 1643-2008 BASE COAT / CLEAR COAT ENAMEL TOPCOAT (POLYESTER / ACRYLIC)
MIL MIL-I-24718/3-1990 INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING POLYESTER DIALLYL PHTHALATE, SLIGHTLY THIXOTROPIC

American Water Works Association (AWWA)

AWWA B451-1998 Poly(Diallyldimethylammonium Chloride)
ANSI/AWWA B451-23 Poly(Diallyldimethylammonium Chloride)
AWWA B451-2010 Poly(Diallyldimethyl-ammonium Chloride)

American National Standards Institute （ANSI)

ANSI/AWWA B451-2016 Poly(Diallyldimethylammonium Chloride)
ANSI/AWWA B451-2023 Standard for Poly (Diallyldimethylammonium Chloride)
ANSI/ASTM D3965:1999 Specification for Rigid Acrylonitrile Butadiene-Styrene (ABS) Compounds for Pipe and Fittings (08.03, 08.04)

Korean Agency for Technology and Standards (KATS)

KS M 3356-2016 Diallyl phthalate molding compounds
KS M 3356-2021 Diallyl phthalate molding compounds
KS M 3811-1995 Polymethyl methacrylate sheets
KS M 3811-2022 Polymethyl methacrylate sheets
KS M 3811-2011 Polymethyl methacrylate sheets
KS M 3356-1981 Diallyl phthalate molding compounds
KS M 3811-2016 Polymethyl methacrylate sheets
KS M ISO 20299-3:2012 Film for wrapping rubber bales-Part 3:Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
KS M 3811-2016(2021) Polymethyl methacrylate sheets
KS M 3356-2016(2021) Diallyl phthalate molding compounds
KS M ISO 16565:2007 Rubber－Determination of 5－ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene－propylene－diene(EPDM) terpolymers
KS M ISO 16565:2017 Rubber — Determination of 5-ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene-propylene-diene(EPDM) terpolymers
KS M 3152-2002 Polymethyl methacrylate moulding materials
KS M 3152-2005 Polymethyl methacrylate moulding materials
KS M 3152-1982 Polymethyl methacrylate moulding materials
KS M ISO 12092:2005 Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure-Resis
KS M ISO 12092-2005(2015) Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride)(PVC－U), chlorinated poly(vinyl chloride) (PVC－C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-
KS K 6405-2010 Polypropylene ropes
KS T 1039-2007 Polypropylene band
KS K 6405-2016 Polypropylene ropes
KS T 1039-2017(2022) Polypropylene band
KS M ISO 16152:2006 Plastics－Determination of xylene-soluble matter in polypropylene
KS A 1507-1997 polypropylene tape
KS K 6405-2016(2021) Polypropylene ropes
KS T 1039-2022 Polypropylene band
KS T 1039-2017 Polypropylene band
KS M ISO 16565-2022 Rubber — Determination of 5-ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene-propylene-diene(EPDM) terpolymers
KS M ISO 16152-2006(2021) Plastics－Determination of xylene-soluble matter in polypropylene

Japanese Industrial Standards Committee (JISC)

JIS K 6718:1993 Polymethyl methacrylate sheets
JIS K 6918:1995 Diallyl phthalate molding compounds
JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
JIS K 6717:1995 Polymethyl methacrylate moulding materials
JIS S 0251:2018 Water-absorbent polyacrylate for urine absorbing products
JIS Z 1527:2002 Polypropylene band
JIS Z 1527:1995 Polypropylene band
JIS L 2706:1992 Polypropylene ropes
JIS K 6874:1995 Testing methods for ABS resins

European Committee for Standardization (CEN)

EN 1408:1998 Chemicals Used for Treatment of Water Intended for Human Consumption - Poly(Diallyldimethylammonium Chloride)
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN 1408:2008 Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN 13559:2003 Specification for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes
EN 12423:1999 Polypropylene twines

Association Francaise de Normalisation

NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T53-031:1990 Plastics. Poly(methyl methacrylate) (pmma) moulding and extrusion materials. Part 1 : designation.
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF D14-522*NF EN 13559:2004 Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes.
NF D11-140:2010 Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods.
NF L17-123:2019 Série aérospatiale - Butadiene - Nitrile acrylique - Classe 23 - Caractéristiques
NF L17-124:2020 Série aérospatiale - Butadiene - Nitrile acrylique - Classe 24 - Caractéristiques
NF T20-803:1976 Propylene. Determination of the propene and propadine. Gas phase chromatographic method.

GSO

GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
BH GSO ISO 16565:2016 Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
OS GSO ISO 16565:2014 Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
OS GSO ISO 16152:2013 Plastics - Determination of xylene-soluble matter in polypropylene
GSO ISO 16565:2014 Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers

Lithuanian Standards Office

LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

Danish Standards Foundation

DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

GM North America

GM GMP.PP.102-1999 Polypropylene - 33% Calcium Carbonate Filled, Homopolymer
GM GMP.PMMA.013-1998 Acrylic - Imide Copolymer, Weather Resistant
GM GM9740P-1988 Acrylonitrile, Styrene and Butadiene Compositions in ABS Polymers
GM GMP.PP.080-1999 Polypropylene - 40% Calcium Carbonate Filled, Extrusion Grade, Homopolymer
GM GMP.PP.031-1994 Polypropylene - 12% Mica Filled, Heat Stabilized, Polypropylene Homopolymer
GM GMP.PP.056-1994 Polypropylene - 10% Calcium Carbonate Filled, Impact Modified
GM GMP.PMMA.014-1998 Acrylic - Imide Copolymer, Exterior Lenses
GM GMP.PP.055-1991 Polypropylene - 25% Mica Filled Impact Modified Copolymer Polypropylene

German Institute for Standardization

DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN 54217:1975 Testing of textiles; quantitative analysis of binary mixtures, acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres, dimethyl formamide method
DIN EN 13559:2003 Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes; German version EN 13559:2003
DIN EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DIN EN ISO 19065-2:2019-06 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN EN ISO 19065-1:2015-03 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
DIN EN 12423:1999-07 Polypropylene twines; German version EN 12423:1999

CEN - European Committee for Standardization

EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
EN ISO 2507-3:2017 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/ butadiene/styrene (ABS) and acrylonitrile/styrene/ acrylic ester (ASA) pipes and fittings
EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

AENOR

UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

VN-TCVN

TCVN 6147-3-2003 Thermoplastics pipes and fittings.Vicat softening temperature.Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

(U.S.) Ford Automotive Standards

FORD ESE-M8G66-A-1978 OIL SEAL, POLYACRYLIC RUBBER
FORD ESB-M11P44-A-1989 ADHESION REQUIREMENTS, ADHESIVE FOR BONDING ACRYLIC LENSES TO ABS REAR LAMP BODIES
FORD WSS-M4D945-A1-1996 POLYPROPYLENE (PP) HOMOPOLYMER, 25 % CALCIUM CARBONATE FILLED MOLDING COMPOUND
FORD WSS-M4D682-A7-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE (ASA+PC) MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D905-A1-1996 ABS, HIGH IMPACT STRENGTH EXTRUSION MOLDING COMPOUND
FORD ESB-M11P52-A-1990 SEALING REQUIREMENTS, ADHESIVE, SEALING, ACRYLIC LENSES TO ABS LAMP BODIES, SERVICEABLE

ES-UNE

UNE 53975:2023 Plastics. Polyethylene (PE), Polypropylene (PP) and Poly(ethylene terephthalate) (PET) containers. Environmental stress-crack resistance in active environment.
UNE-EN ISO 19065-2:2020 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

SE-SIS

SIS 16 27 00-1974 Rubber type 70 (ethylene-propylene copolymer and ethylene propylene terpolymer, EPM and EPDM)

CZ-CSN

CSN 64 3412-1974 Polymethyl methacrylate lates transparent coloured
CSN 64 3411-1974 plates transparent colouress olymethyl methacrylate
CSN 65 6491-1978 Propylene for polymeration
CSN 64 3414-1974 Polymethyl methacrylate lates pearlescent coloured otdrawing and drawing

VDI - Verein Deutscher Ingenieure

VDI/VDE 2476 Blatt 2-1974 Polymethylmethacrylate semi-finished products

Indonesia Standards

SNI 7861-2013 Asam akrilat
SNI 0594-2011 Polypropylene
SNI 06-0540-1989 Polypropylene and copolymer propylene, Codefication

RU-GOST R

GOST 26996-1986 Polypropylene and copolymers of propylene. Specifications
GOST 30713-2000 Polyacrylonitrile fibre. Determination of the concentration of acrylonitrile migration in air. Method of gas chromatography