Straight bevel gear load capacity

Straight bevel gear load capacity, Total:137 items.

The international standard classification for "Straight bevel gear load capacity" includes: Gears .

The Chinese standard classification for "Straight bevel gear load capacity" includes: Gear and gear drive .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3480.3-2021 Calculation of load capacity of spur and helical gears—Part 3: Calculation of tooth bending strength
GB/Z 3480.22-2024 Calculation of load capacity of spur and helical gears—Part 22: Calculation of micropitting load capacity
GB/T 44846-2024 Calculation of load capacity for plastic gear
GB/Z 3480.4-2024 Calculation of load capacity of spur and helical gears—Part 4: Calculation of tooth flank fracture load capacity
GB/T 10062.3-2003 Calculation of load capacity of bevel gear - Part 3: Calculation of tooth root strength
GB/T 3480.2-2021 Calculation of load capacity of spur and helical gears—Part 2: Calculation of surface durability (pitting)
GB/Z 6413.1-2003 Calculation of scuffing load capacity of cylindrical,bevel and hypoid gears—Part 1:Flash temperature method
GB/Z 6413.2-2003 Calculation of scuffing load capacity of cylindrical,bevel and hypoid gears—Part 2:Integral temperature method
GB/T 19406-2003 Calculation methodds of load capacity for involute cylindrical spur and helical gears—Application for industrical gears

Professional Standard - Aviation

HB/Z 89.4-1985 Calculation of bearing capacity of aviation bevel gears
HB/Z 89.1-1985 Calculation of General Coefficients of Carrying Capacity of Aeronautical Bevel Gears

Czech Standards Institute (UNMZ)

CSN 01 4686 Dil.6-1975 Calculation of load capacity of spur and bevel gears. Zone factor Zh
CSN 01 4686 Dil.11-1975 Calculation of load capacity of spur and bevel geais. Helix angle of tooth faetor Yβ
CSN 01 4686 Dil.20-1975 Calculation <>f load eajjacity of spur and bevel gears. Bibliogvaphy
CSN 01 4686 Cast.2-1988 Calculation of load capacity of spur and bevel gears.Equívalent load, relcvant load
CSN 01 4686 Dil.10-1975 Calculation of load capacity of spur and bevel gears. Guide materisl data
CSN 01 4686 Dil.9-1975 Calculation of load oapacity of spur and bevel gears. Contact ratio factor Zt
CSN 01 4686 Dil.14-1975 Calculation of load capacity of spur and bevel gears. Factors of safety Sf min and Sh min
CSN 01 4686 Dil.12-1975 Calculation of load capacity of spur and bevel gears. Stress concentration factor Ys, Roughness factor Yr
CSN 01 4686 Dil.13-1975 Calculation of load capacity of spur and bevel gears. Size faetors of bending stress Kfx and of Hertzian pressure Khx
CSN 01 4686 Cast.4-1988 Calculation of load capacity of spur and bevel gears.Preliminary estimation of gear dimens- ions; simplified method of calculation
CSN 01 4686 Dil.8-1975 Calculation of load capacity of spur and bevel gears. Single tooth contact factors ZB Zd and transverse contact ratio ea

Austrian Standards

ONORM M 6745-4-1994 Calculation of load capacity of bevel gears without offset - Scuffing load capacity
ONORM M 6748-1991 Calculation of load capaclty of hypold gears Calculation of the resistance of hypoid gears
ONORM M 6745-3-1994 Calculation of load capacity of bevel gears without offset - Tooth strength

American Gear Manufacturers Association

13FTM10-2013 Calculation of the Tooth Root Load Carrying Capacity of Beveloid Gears
AGMA 13FTM10-2013 Calculation of the Tooth Root Load Carrying Capacity of Beveloid Gears
AGMA 11FTM10-2011 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
AGMA 12FTM15-2012 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
12FTM15-2012 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
11FTM10-2011 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
P84FTM11-1984 Proposal for the Load- Capacity Calculation Formulae of Bevel Gears
94FTM4-1994 Load Carrying Capacity of Nitrided Gears
AGMA 94FTM4 Load Carrying Capacity of Nitrided Gears
AGMA 23FTM18 Local Load Capacity Analysis for the Design of a Balanced Flank Modification for Cylindrical Gears According to Bevel Gear Procedures
AGMA 6019-E89 Gearmotors Using Spur, Helical, Herringbone, Straight Bevel, or Spiral Bevel Gears

Swedish Institute for Standards

SS 1862:1978 Bevel gears - Calculation of load capacity
SIS SMS 1862-1975 Bevel gears. Calculation of load capacity

International Organization for Standardization (ISO)

ISO/TR 10300-30:2024 Calculation of load capacity of bevel gears
ISO/TS 6336-4:2019 Calculation of load capacity of spur and helical gears — Part 4: Calculation of tooth flank fracture load capacity
ISO 9083:2001 Calculation of load capacity of spur and helical gears - Application to marine gears
ISO/TR 10300-32:2021 Calculation of load capacity of bevel gears - Part 32: ISO rating system for bevel and hypoid gears - Sample calculation for scuffing load capacity
ISO 10300-3:2023 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
ISO 10300-3:2011 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
ISO/FDIS 10300-3 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
ISO/TS 6336-22:2018 Calculation of load capacity of spur and helical gears - Part 22: Calculation of micropitting load capacity
ISO 9084:2000 Calculation of load capacity of spur and helical gears - Application to high speed gears and gears of similar requirements
ISO/TS 6336-20:2017 Calculation of load capacity of spur and helical gears - Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Flash temperature method
ISO/TR 6336-31:2018 Calculation of load capacity of spur and helical gears - Part 31: Calculation examples of micropitting load capacity
ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears - Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Integral temperature method
ISO/TR 10300-30:2017 Calculation of load capacity of bevel gears - Part 30: ISO rating system for bevel and hypoid gears - Sample calculations
ISO 6336-3:1996 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
ISO 6336-3:2006 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
ISO 9085 Calculation of load capacity of spur and helical gears - Application for industrial gears
ISO 10300-3:2001 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Part 1: Flash temperature method
ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Part 2: Integral temperature method
ISO/TS 14521:2020 Gears — Calculation of load capacity of worm gears
ISO 6336-2:1996 Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pittings)
ISO 6336-2:2006 Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting)

British Standards Institution (BSI)

BS ISO 10300-3:2001 Calculation of load capacity of bevel gears-Calculation of tooth root strength
PD ISO/TR 10300-32:2021 Calculation of load capacity of bevel gears. ISO rating system for bevel and hypoid gears. Sample calculation for scuffing load capacity
BS PD ISO/TR 10300-32:2021 Calculation of load capacity of bevel gears. ISO rating system for bevel and hypoid gears. Sample calculation for scuffing load capacity
BS PD ISO/TS 6336-20:2017 Calculation of load capacity of spur and helical gears-Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) -- Flash temperature method
BS ISO 10300-3:2023 Calculation of load capacity of bevel gears - Calculation of tooth root strength
BS ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears-Flash temperature method
BS PD ISO/TS 6336-4:2019 Calculation of load capacity of spur and helical gears-Calculation of tooth flank fracture load capacity
PD ISO/TR 10300-30:2017 Calculation of load capacity of bevel gears. ISO rating system for bevel and hypoid gears. Sample calculations
BS ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears-Integral temperature method
BS PD ISO/TS 6336-22:2018 Calculation of load capacity of spur and helical gears. Calculation of micropitting load capacity
BS PD ISO/TS 6336-21:2022 Calculation of load capacity of spur and helical gears-Part 21: Calculation of scuffing load capacity — Integral temperature method
BS PD ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears-Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Integral temperature method
PD ISO/TS 10300-20:2021 Calculation of load capacity of bevel gears. Calculation of scuffing load capacity. Flash temperature method
PD ISO/TS 6336-4:2019 Calculation of load capacity of spur and helical gears. Calculation of tooth flank fracture load capacity
BS PD ISO/TS 6336-20:2022 Calculation of load capacity of spur and helical gears-Calculation of scuffing load capacity. Flash temperature method
BS PD ISO/TR 6336-31:2018 Calculation of load capacity of spur and helical gears. Calculation examples of micropitting load capacity
BS PD ISO/TS 10300-20:2021 Calculation of load capacity of bevel gears. Calculation of scuffing load capacity. Flash temperature method
BS ISO 6336-5:2003 Calculation of load capacity of spur and helical gears. Strength and quality of materials
11/30229142 DC BS ISO 10300-3. Calculation of load capacity of bevel gears. Part 3. Calculation of tooth root strength
BS ISO/TR 14179-2:2001 Gears - Thermal capacity - Thermal load carrying capacity
BS PD ISO/TR 10300-30:2024 Calculation of load capacity of bevel gears - ISO rating system for bevel and hypoid gears. Sample calculations

German Institute for Standardization

DIN 3991-4:1988-09 Calculation of load capacity of bevel gears without pinion offset; calculation of scuffing load capacity
DIN 3991-3:1988-09 Calculation of load capacity of bevel gears without pinion offset; calculation of tooth strength
DIN 3991-3:2024-06 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
DIN 3991-3:2024 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
DIN 3991-3 E:2023 Draft Document - Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
DIN 3991-3:2023-08 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength / Note: Date of issue 2023-07-14*Intended as replacement for DIN 3991-3 (1988-09).
DIN 3991-2:1988-09 Calculation of load capacity of bevel gears without pinion offset; calculation of pitting resistance
DIN 3991-3 E:2023-08 Draft Document - Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
DIN 3991-3:1988 Calculation of load capacity of bevel gears without pinion offset; calculation of tooth strength

Korean Agency for Technology and Standards (KATS)

KS B ISO 9083-2004(2019) Calculation of load capacity of spur and helical gears－Application to marine gears
KS B ISO 10300-3-2024 Calculation of load capacity of bevel gears － Part 3: Calculation of tooth root strength
KS B ISO 10300-3-2009(2019) Calculation of load capacity of bevel gears－Part 3：Calculation of tooth root strength
KS B ISO 10300-3-2009(2024) Calculation of load capacity of bevel gears － Part 3: Calculation of tooth root strength
KS B ISO 6336-2:2007 Calculation of load capacity of spur and helical gears-Part 2:Calculation of surface durability(pitting)
KS B ISO 10300-3-2019 Calculation of load capacity of bevel gears － Part 3: Calculation of tooth root strength
KS B ISO 6336-2:2015 Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability(pitting)
KS B ISO 6336-3:2015 Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
KS B ISO 6336-3:2006 Calculation of load capacity of spur and helical gears-Part 3:Calculation of tooth bending strength
KS B ISO 10300-3:2009 Calculation of load capacity of bevel gears － Part 3: Calculation of tooth root strength
KS B ISO 9085-2024 Calculation of load capacity of spur and helical gears -Application for industrial gears
KS B ISO 9083-2024 Calculation of load capacity of spur and helical gears -Application to marine gears
KS B ISO 9083-2004(2024) Calculation of load capacity of spur and helical gears -Application to marine gears
KS B ISO 9085-2004(2019) Calculation of load capacity of spur and helical gears - Application for industrial gears
KS B ISO 9085-2004(2024) Calculation of load capacity of spur and helical gears -Application for industrial gears

Finnish Standards Institute

SFS 5488-1988 In case of interpretation disputes the Finnish text applies

Danish Standards Foundation

DS/ISO/TR 10300-32:2021 Calculation of load capacity of bevel gears – Part 32: ISO rating system for bevel and hypoid gears – Sample calculation for scuffing load capacity
DANSK DS/ISO/TS 6336-20:2017 Calculation of load capacity of spur and helical gears -- Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) – Flash temperature method
DANSK DS/ISO 10300-3:2014 Calculation of load capacity of bevel gears – Part 3: Calculation of tooth root strength
DANSK DS/ISO/TS 6336-4:2019 Calculation of load capacity of spur and helical gears – Part 4: Calculation of tooth flank fracture load capacity
DS/ISO/TS 10300-20:2021 Calculation of load capacity of bevel gears – Part 20: Calculation of scuffing load capacity – Flash temperature method

Ente Nazionale Italiano di Unificazione

UNI ISO/TS 6336-20:2020 Calculation of load capacity of spur and helical gears - Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) -- Flash temperature method
UNI ISO 10300-3:2024 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
UNI ISO/TS 6336-21:2020 Calculation of load capacity of spur and helical gears - Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) -- Integral temperature method
UNI ISO/TS 6336-4:2020 Calculation of load capacity of spur and helical gears - Part 4: Calculation of tooth flank fracture load capacity
UNI ISO/TS 6336-22:2020 Calculation of load capacity of spur and helical gears - Part 22: Calculation of micropitting load capacity
UNI ISO/TR 6336-31:2020 Calculation of load capacity of spur and helical gears - Part 31: Calculation examples of micropitting load capacity
UNI ISO/TS 6336-20:2022 Calculation of load capacity of spur and helical gears - Part 20: Calculation of scuffing load capacity - Flash temperature method
UNI ISO/TS 10300-20:2021 Calculation of load capacity of bevel gears - Part 20: Calculation of scuffing load capacity -- Flash temperature method

GCC Standardization Organization

BH GSO ISO 10300-3:2024 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
GSO ISO 10300-3:2021 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 10300-3:2022 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
BH GSO ISO/TS 10300-20:2023 Calculation of load capacity of bevel gears — Part 20: Calculation of scuffing load capacity — Flash temperature method

Association Francaise de Normalisation

XP E23-030-20*XP ISO/TS 6336-20:2018 Calculation of load capacity of spur and helical gears - Part 20 : calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Flash temperature method
XP E23-030-21*XP ISO/TS 6336-21:2018 Calculation of load capacity of spur and helical gears - Part 21 : calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Integral temperature method
XP E23-036*XP ISO/TS 14521:2020 Gears - Calculation of load capacity of worm gears
XP E23-030-20*XP ISO/TS 6336-20:2022 Calculation of load capacity of spur and helical gears - Part 20: Calculation of scuffing load capacity - Flash temperature method
XP E23-033-22*XP ISO/TS 6336-22:2019 Calculation of load capacity of spur and helical gears - Part 22 : calculation of micropitting load capacity

Standards Norway

NS 5011-1977 Spur and helical gears - Calculation of load capacity
NS 5004-1969 Gears - Basic rack with tip relief of straight bevel gears
NS 5002:1969 Gears — Basic rack of straight bevel gears
NS 5002-1969 Gears - Basic rack of straight bevel gears

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 7578-3-2006 Calculation of load capacity of spur and helical gears.Part 3: Calculation of tooth bending strength

Association of German Mechanical Engineers

VDI 2736 Blatt 2-2013 Thermoplastische Zahnraeder - Stirnradgetriebe - Tragfaehigkeitsberechnung
VDI 2736 Blatt 2-2014 Thermoplastic gear wheels - Cylindrical gears - Calculation of the load-carrying capacity
VDI 2737-2015 Berechnung der Zahnfusstragfaehigkeit von Innenverzahnungen mit Zahnkranzeinfluss

Bureau of Indian Standards

IS 12328 Pt.1-1988 Bevel Gear Systems Part 1 Spur Bevel Gears

Others: Straight bevel gear load capacity