hb 223.5

hb 223.5, Total:378 items.

The international standard classification for "hb 223.5" includes: Ferrous metals in general , Ferrous metals .

The Chinese standard classification for "hb 223.5" includes: Cold processing technology , Cutters , Cutting tools , Steel and iron alloy analysis method .

Professional Standard - Aviation

HB 6921-1994 Slot milling cutter for two-tooth roughing end mill for HB 6910-94 HB 6913-94.D=45~63mm
HB 2407-1977 HB 243-70 AG, BG thread group plug gauge d=6~30mm
HB 2373-1977 Machine and hand taps for processing HB 241-75 threads with non-through holes in heat-resistant steel d=4~7mm
HB 2412-1977 HB 243-70 CG thread group plug gauge d=6~30mm
HB 2388-1977 Thread rolling shaft for rolling HB 243-70 thread rolling wheel d=36~45mm t=1.5mm
HB 2386-1977 Thread rolling shaft for rolling HB 241-75, HB 242-70 thread rolling wheel d=36~45mm t=1.5~2mm
HB 2359-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=10~36mm
HB 2419-1977 Appraisal of HB 243-70 threaded band watch comb-shaped caliper wear pair watch parts d=3~6mm
HB 2384-1977 Thread rolling wheel for HB 243-70 thread d=3~45mm t=0.5~1.5mm
HB 743-1992 Template and Reference Template Used for Screw Tap Slot Milling Cutter for Inspecting HB 736-92 Slot Milling Cutter
HB 2390-1977 Thread rolling plate for HB 241-75, HB 242-70 thread d=2~6mm t=0.35~2mm
HB 6917-1994 Slot milling cutter for four-tooth roughing end mill for HB 6904~6905-94 HB 6907~6908-94.D=40~63mm
HB 6927-1994 HB 6911~6912-94 HB 6914~6915-94.D=75~80mm
HB 2360-1977 Machine and hand taps d=1~3.5mm for machining light alloy non-through hole HB 241-75 thread
HB 7242-1995 General specification for aircraft engine installation vehicle HB
HB 2413-1977 HB 243-70 CG thread plug gauge and thread group plug gauge application size d=5~30mm
HB 2387-1977 Thread rolling shaft for rolling HB 243-70 thread rolling wheel d=3~33mm t=0.5~0.5mm
HB 2394-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=1~5mm
HB 2405-1977 HB 243-70 AG, BG thread plug gauge d=6~30mm
HB 6938-1994 Excentric-back Cutter for Double-gear Bulb End-milling Cutter Used for HB 6929-94 and HB 6932-94 D=56~63mm
HB 2423-1978 Hand tap for processing HB 243-70 AG interference thread d=3~5mm
HB 2382-1977 HB 242-70 thread rolling wheel for reinforced clearance thread d=2~45mm t=0.35~2mm
HB 2378-1977 Nut tap d=8~11mm for processing heat-resistant steel HB 241-75 thread
HB 2420-1977 Appraisal of HB 243-70 threaded band table comb-shaped caliper wear pair table parts d=7~30mm
HB 2385-1977 Thread rolling shaft for rolling HB 241-75, HB 242-70 threads d=2~33mm t=0.35~2mm
HB 6923-1994 Two-tooth rough machining end mill with back cutter for HB 6910~94 HB 6913-94.D=56~63mm
HB 7312-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 AG and BG Thread d=42~45mm p=1.5mm
HB 2408-1977 HB 243-70 AG, BG thread plug gauge and thread group plug gauge application size d=3~30mm
HB 7316-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91CG and DG Thread d=42~45mm p=1.5mm
HB 2404-1977 HB 243-70 AG, BG thread plug gauge d=3~5mm
HB 2374-1977 Machine and hand taps for processing heat-resistant steel non-through holes HB 241-75 threads d=8~11mm
HB 743-1977 Tap slot milling cutter sample and proofreading sample testing HB 736-92 slot milling cutter
HB/Z 223.5-1993 Aircraft Assembly Process - Sealing Riveting of Coating Sealant
HB 2369-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=4~7mm
HB 6919-1994 Slot milling cutter for six-tooth roughing end mill for HB 6906-94 HB 6909-94.D=55~75mm
HB 2406-1977 HB 243-70 AG, BG thread group plug gauge d=3~5mm
HB 2368-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=1~3.5mm
HB 2363-1977 Machine and hand taps d=12~36mm for processing light alloy non-through hole HB 241-75 thread
HB 2375-1977 Machine and hand taps d=12~36mm for processing heat-resistant steel non-through hole HB 241-75 thread
HB 2370-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=8~11mm
HB 2392-1977 HB 242-70 threaded end ring gauge d=1~100mm
HB 257-1973 HB 241-70, HB 243-70 HB 243-70 threaded bottom hole with smooth plug gauge application size M1~M120, AG3~AG30
HB 2421-1977 HB 243-70 threaded comb-shaped caliper for watch parts application size d=3~30mm
HB 2418-1977 HB 243-70 Comb-shaped caliper with threaded table d=7~30mm
HB 2380-1977 HB 241-75, HB 242-70 thread rolling wheels for ordinary and ordinary clearance threads d=2~45mm t=0.35~2mm
HB 2427-1978 Machine tap d=6~7mm for processing HB 243-70 AG interference thread
HB 2425-1978 Hand tap for processing HB 243-70 AG interference thread d=8~30mm
HB 2371-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=12~36mm
HB 2414-1977 HB 243-70 threaded comb gauge d=3~30mm
HB 7314-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 CG and DG Thread d=12~30mm p=1.25~1.5mm
HB 6925-1994 HB 6911~6912-94 HB 6914~6915-94.D=63~80mm for slot milling cutter for three-tooth rough machining end mill
HB 2362-1977 Machine and hand taps d=8~11mm for processing light alloy non-through hole HB 241-75 thread
HB 2399-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass TY d=6~48mm
HB 2372-1977 Machine and hand taps d=1~3.5mm for machining heat-resistant steel non-through hole HB 241-75 thread
HB 2397-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=105~150mm
HB 2428-1978 Machine tap d=8~20mm for processing HB 243-70 AG interference thread
HB 4652-1992 Template and Checking Template
HB 2393-1977 HB 242-70 threaded end ring gauge d=105~150mm
HB 2379-1977 Nut taps for processing heat-resistant steel HB 241-75 threads d=12~36mm
HB 7315-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 CG and DG Thread d=33~39mm p=1.5mm
HB 2426-1978 Machine tap d=3~5mm for processing HB 243-70 AG interference thread
HB 2396-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=52~100mm
HB 2415-1977 HB 243-70 threaded comb-shaped caliper with meter fixed measuring head d=3~30mm
HB 2356-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=1~3.5mm
HB 2410-1977 HB 243-70 CG thread plug gauge d=6~30mm
HB 2381-1977 HB 241-75, HB 242-70 thread rolling wheels for ordinary and ordinary clearance threads d=2~33mm t=0.35~2mm
HB 2383-1977 HB 242-70 thread rolling wheel for reinforced clearance thread d=2~33mm t=0.35~2mm
HB 6936-1994 Slot Cutter for Two-gear Bulb End-milling Cutter, Applicable to HB 6929-94 HB 6932-94 D=40~63mm
HB 2416-1977 HB 243-70 threaded comb-shaped caliper with table active measuring head d=3~30mm
HB 2377-1977 Nut tap d=4~7mm for processing heat-resistant steel HB 241-75 thread
HB 6940-1994 Slot Cutter for Four-gear Bulb End-milling Cutter, Aplicable to HB 6930-94 and HB 6933-94 D=45~80mm
HB 2417-1977 HB 243-70 threaded comb-shaped caliper with table d=3~6mm
HB 2424-1978 Hand tap for processing HB 243-70 AG interference thread d=6~7mm
HB 7310-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 AG and BG Thread d=12~30 p=1.25~1.5mm
HB 2361-1977 Machine and hand taps d=4~7mm for processing light alloy non-through hole HB 241-75 thread
HB 6942-1994 Slot Cutter for Six-gear Bulb End-milling Cutter, Applicable to HB 6904~6905-94 and HB 6907~6908-94 D=63~80mm
HB 2376-1977 Nut tap d=3~3.5mm for processing heat-resistant steel HB 241-75 thread
HB 2395-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=6~48mm

未注明发布机构

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy The reduced molybdosilicate spectrophotometric method for the determination of acid-soluble silicon content
GB/T 223.5-2008 Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectrophotometric method

SCC

BS HB 10169:1999 Handbook HB 10167:1999
BS HB 10170:1999 Handbook HB 10170:1999
BS HB 10167:1999 Handbook HB 10167:1999
BS HB 10168:1999 Handbook HB 10168:1999
NZS HB44:2001 Subdivision for People and the Environment (SNZ HB 44:2001)

British Standards Institution (BSI)

HB 10194-2012 HB 10194:2012 Guidance note 3. Inspection and Testing 6/ed

ZA-SANS

SANS 1200 HB:1985 Standardized specification for civil engineering construction Section HB: Cladding and sheeting