Introduction to HMGCR gene

Introduction to HMGCR gene, Total:392 items.

The international standard classification for "Introduction to HMGCR gene" includes: Other services , Services .

The Chinese standard classification for "Introduction to HMGCR gene" includes: Supply and Use Relation .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23861-2009 Matchmaking service

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33535-2017 Specification of job intermediary service

未注明发布机构

CSA Z317.14-2017 Orientation in health establishments

Group Standards of the People's Republic of China

T/CQTSHRA 006-2024 Specification of public job intermediary service
T/SZZX 020-2024 Matchmaking Service Specification

Beijing Provincial Standard of the People's Republic of China

DB11/T 1123-2014 Specifications for public employment referral services

Shanghai Provincial Standard of the People's Republic of China

DB31/T 520-2011 Matchmaking Service Specifecation

American National Standards Institute （ANSI)

AAMI CR500:2019 Basic Introduction to the IEC 60601 Series
ANSI/TIA-136-100-B-2000 Introduction to Channels
ANSI/TIA-41.000-E-9-2012 Mobile Application Part (MAP) Introduction

Aeronautical Radio Inc.

ARINC 738-3 ITEM 1.0-2001 Introduction
ARINC 628P0 ITEM 1.0 Introduction
ARINC 637P1-1 ITEM 1.0 Introduction
ARINC 638 ITEM 1.0 Introduction
ARINC 660A ITEM 1.0 Introduction
ARINC 664P4 ITEM 1.0 Introduction
ARINC 744 ITEM 1.0 Introduction
ARINC 747-2 ITEM 1.0 Introduction
ARINC 738-3 ITEM 1.0 Introduction
ARINC 744A-1 ITEM 1.0 Introduction
ARINC 750-3 ITEM 1.0 Introduction
ARINC 738A-1 ITEM 1.0-2001 Introduction
ARINC 404B-1 ITEM 1.0-2002 Introduction
ARINC 652 ITEM 1.0-1993 Introduction
ARINC 433 ITEM 1.0 Introduction
ARINC 602A-2 ITEM 1.0 Introduction
ARINC 627-2 ITEM 1.0 Introduction
ARINC 632 ITEM 1.0 Introduction
ARINC 636 ITEM 1.0 Introduction
ARINC 652 ITEM 1.0 Introduction
ARINC 664P1 ITEM 1.0 Introduction
ARINC 665-2 ITEM 1.0 Introduction
ARINC 628P3-1 ITEM 1.0 Introduction
ARINC 631-3 ITEM 1.0 Introduction
ARINC 655 ITEM 1.0 Introduction
ARINC 660 ITEM 1.0 Introduction
ARINC 708A-3 ITEM 1.0 Introduction
ARINC 408A SEC 1.0-1976 Introduction
ARINC 613 ITEM 1.0-1988 Introduction
ARINC 636 ITEM 1.0-1993 Introduction
ARINC 726-1 ITEM 1.0-1981 Introduction
ARINC 745-2 ITEM 1.0-1993 Introduction
ARINC 485P1 ITEM 1.0 Introduction
ARINC 613 ITEM 1.0 Introduction
ARINC 628P8 ITEM 1.0-2001 Introduction
ARINC 650 ITEM 1.0-1994 Introduction
ARINC 628P6 ITEM 1.0-2002 Introduction
ARINC 738A-1 ITEM 1.0 Introduction
ARINC 742 ITEM 1.0 Introduction
ARINC 757-3 ITEM 1.0 Introduction
ARINC 761-2 ITEM 1.0 Introduction
ARINC 408A SEC 1.0 Introduction
ARINC 610B ITEM 1.0 Introduction
ARINC 640 ITEM 1.0 Introduction
ARINC 646 ITEM 1.0 Introduction
ARINC 650 ITEM 1.0 Introduction
ARINC 628P1-3 ITEM 1.0-2001 Introduction
ARINC 729-1 ITEM 1.0-1981 Introduction
ARINC 742 ITEM 1.0-1988 Introduction
ARINC 743A-4 ITEM 1.0-2001 Introduction
ARINC 666 ITEM 1.0 Introduction
ARINC 667 ITEM 1.0 Introduction
ARINC 404B-1 ITEM 1.0 Introduction
ARINC 428 ITEM 1.0 Introduction
ARINC 573-7 SEC 1.0 Introduction
ARINC 574 1.0 Introduction
ARINC 607-3 ITEM 1.0 Introduction
ARINC 608A ITEM 1.0 Introduction
ARINC 628P4B ITEM 1.0 Introduction
ARINC 628P6 ITEM 1.0 Introduction
ARINC 654 ITEM 1.0 Introduction
ARINC 656 ITEM 1.0 Introduction
ARINC 661-1 ITEM 1.0 Introduction
ARINC 413A SEC 1.0-1976 Introduction
ARINC 608A ITEM 1.0-1993 Introduction
ARINC 614 ITEM 1.0-1989 Introduction
ARINC 627-2 ITEM 1.0-2002 Introduction
ARINC 635-4 ITEM 1.0-2003 Introduction
ARINC 743 ITEM 1.0-1990 Introduction
ARINC 419-3 SECTION 1.0 Introduction
ARINC 422 1.0 Introduction
ARINC 485P2 ITEM 1.0 Introduction
ARINC 606-1 ITEM 1.0 Introduction
ARINC 614 ITEM 1.0 Introduction
ARINC 628P9 ITEM 1.0 Introduction
ARINC 662 ITEM 1.0-2000 Introduction
ARINC 664P3 ITEM 1.0 Introduction
ARINC 724-9 ITEM 1.0 Introduction
ARINC 724B-5 ITEM 1.0 Introduction
ARINC 765 ITEM 1.0 Introduction
ARINC 424-16 ITEM 1.0 Introduction
ARINC 429P1-16 ITEM 1.0 Introduction
ARINC 434 ITEM 1.0 Introduction
ARINC 603-1 ITEM 1.0 Introduction
ARINC 628P1-3 ITEM 1.0 Introduction
ARINC 628P2-3 ITEM 1.0 Introduction
ARINC 628P8 ITEM 1.0 Introduction
ARINC 664P2 ITEM 1.0 Introduction
ARINC 744A-1 ITEM 1.0-1994 Introduction
ARINC 751 ITEM 1.0-1994 Introduction
ARINC 753-3 ITEM 1.0-2001 Introduction
ARINC 610B ITEM 1.0-2001 Introduction
ARINC 737-1 ITEM 1.0-1997 Introduction
ARINC 573-7 SEC 1.0-1974 Introduction
ARINC 421 ITEM 1.0 Introduction
ARINC 432 ITEM 1.0 Introduction
ARINC 611-1 ITEM 1.0 Introduction
ARINC 615A-2 ITEM 1.0 Introduction
ARINC 619-1 ITEM 1.0 Introduction
ARINC 620-4 ITEM 1.0 Introduction
ARINC 629P1-5 ITEM 1.0 Introduction
ARINC 746-4 ITEM 1.0 Introduction
ARINC 751 ITEM 1.0 Introduction
ARINC 753-3 ITEM 1.0 Introduction
ARINC 668 ITEM 1.0 INTRODUCTION
ARINC 717-10 ITEM 1.0 Introduction
ARINC 729-1 ITEM 1.0 Introduction
ARINC 743 ITEM 1.0 Introduction
ARINC 743A-4 ITEM 1.0 Introduction
ARINC 413A SEC 1.0 Introduction
ARINC 429P2-15 ITEM 1.0 Introduction
ARINC 605 ITEM 1.0 Introduction
ARINC 610A-1 ITEM 1.0 Introduction
ARINC 615-4 TITLE 1.0 Introduction
ARINC 617 DRAFT 1.0 Introduction
ARINC 651-1 ITEM 1.0 Introduction
ARINC 706-4 ITEM 1.0 Introduction
ARINC 433 ITEM 1.0-2001 Introduction
ARINC 640 ITEM 1.0-1997 Introduction
ARINC 646 ITEM 1.0-1995 Introduction
ARINC 651-1 ITEM 1.0-1997 Introduction
ARINC 758-1 ITEM 1.0 Introduction
ARINC 737-1 ITEM 1.0 Introduction
ARINC 628P3-1 ITEM 1.0-1999 Introduction
ARINC 744 ITEM 1.0-1990 Introduction
ARINC 747-2 ITEM 1.0-1998 Introduction
ARINC 429P3-18 ITEM 1.0 Introduction
ARINC 625-1 ITEM 1.0 Introduction
ARINC 628P5 ITEM 1.0 Introduction
ARINC 635-4 ITEM 1.0 Introduction
ARINC 653-1 ITEM 1.0 Introduction
ARINC 659 ITEM 1.0 Introduction
ARINC 663 ITEM 1.0 Introduction
ARINC 745-2 ITEM 1.0 Introduction
ARINC 720-1 ITEM 1.0 Introduction
ARINC 726-1 ITEM 1.0 Introduction
ARINC 609 ITEM 1.0-1987 Introduction and Description
ARINC 610-1 ITEM 1.0-1992 Introduction and Description
ARINC 722 ITEM 1.0-1980 Introduction and Description
ARINC 594-4 ITEM 1.0-1984 Introduction and Description
ARINC 701-1 ITEM 1.0 Introduction and Description
ARINC 708-6 ITEM 1.0 Introduction and Description
ARINC 715-3 ITEM 1.0 Introduction and Description
ARINC 716-11 ITEM 1.0 Introduction and Description
ARINC 752-1 ITEM 1.0 Introduction and Description
ARINC 735A-1 ITEM 1.0-2003 Introduction and Description
ARINC 538B-1 ITEM 1.0 Introduction and Description
ARINC 595 ITEM 1.0 Introduction and Background
ARINC 760-1 ITEM 1.0-2000 Introduction and Description
ARINC 762-1 ITEM 1.0-2000 Introduction and Description
ARINC 644 ITEM 1.0-1993 Introduction and Description
ARINC 604-1 ITEM 1.0 Introduction and Description
ARINC 704-7 ITEM 1.0 Introduction and Description
ARINC 577-1 ITEM 1.0-1975 Introduction and Description
ARINC 707-6 ITEM 1.0 Introduction and Description
ARINC 725-2 ITEM 1.0-1984 Introduction and Description
ARINC 704A ITEM 1.0 Introduction and Description
ARINC 585-2 ITEM 1.0 Introduction and Description
ARINC 727-1 ITEM 1.0-1987 Introduction and Description
ARINC 731-3 ITEM 1.0-1998 Introduction and Description
ARINC 735-2 ITEM 1.0-1993 Introduction and Description
ARINC 718-4 ITEM 1.0-1989 Introduction and Description
ARINC 705-5 ITEM 1.0 Introduction and Description
ARINC 739A-1 ITEM 1.0-1998 Introduction and Description
ARINC 719-5 ITEM 1.0-1984 Introduction and Description
ARINC 709-8 ITEM 1.0 Introduction and Description
ARINC 712-7 ITEM 1.0 Introduction and Description
ARINC 591 ITEM 1.0 Introduction and Description
ARINC 739-1 ITEM 1.0-1990 Introduction and Description
ARINC 644A ITEM 1.0-1996 Introduction and Description
ARINC 703-2 ITEM 1.0 Introduction and Description
ARINC 740-1 ITEM 1.0-1988 Introduction and Description
ARINC 723-3 ITEM 1.0-1988 Introduction and Description
ARINC 561-11 SEC 1.0 Introduction and Description
ARINC 562 ITEM 1.0 Introduction and Description
ARINC 569 SEC 1.0 Introduction and Description
ARINC 711-10 ITEM 1.0 Introduction and Description
ARINC 664P1 ITEM 2.0 Introduction To Network Concepts
ARINC 634 ITEM 1.0-1996 Introduction and Executive Summary
ARINC 407-1 PART I-1961 Introduction to Synchro System Theory
ARINC 431 SECTION 1 Introduction, and Task Group General Findings

American Society of Mechanical Engineers (ASME)

ASME SEC III D1 NH INTRO-2003 Introduction
ASME SEC IV PT HLW INTRO-2001 Introduction
ASME SEC VIII D3 INTRO-2003 Introduction
ASME SEC III D1 NC INTRO-2003 Introduction
ASME SEC III NCA INTRO-2003 Introduction
ASME SEC III D1 APP INTRO-2003 Introduction
ASME SEC III D3 INTRO-2003 Introduction
ASME SEC II D INTRO-2003 Introduction
ASME SEC V INTRO-2003 Introduction
ASME SEC X INTRO-2003 Introduction
ASME SEC III D1 NF INTRO-2003 Introduction
ASME SEC VI INTRO-2003 Introduction
ASME SEC VII INTRO-2003 Introduction
ASME SEC VIII D2 INTRO-2003 Introduction
ASME SEC II A INTRO-2003 Introduction
ASME SEC XI INTRO-2003 Introduction
ASME SEC III D1 NE INTRO-2003 Introduction
ASME SEC IV INTRO-2003 INTRODUCTION
ASME SEC I INTRODUCTION-2003 Introduction
ASME SEC II B INTRO-2003 Introduction
ASME SEC III D1 NB INTRO-2003 Introduction
ASME SEC III D1 ND INTRO-2003 Introduction
ASME SEC III D1 NG INTRO-2003 Introduction
ASME SEC VIII D1 INTRO-2003 Introduction
ASME SEC III D1 NC-1000-2001 Article NC-1000 Introduction
ASME SEC III D1 NE-1000-2001 Article NE-1000 Introduction
ASME SEC III D2 CC-1000-2001 Article CC-1000 Introduction
ASME SEC III D1 NH-1000-2001 Article NH-1000 Introduction
ASME SEC III D1 NB-1000-2001 Article NB-1000 Introduction
ASME SEC III D1 NG-1000-2001 Article NG-1000 Introduction
ASME SEC III D1 NF-1000-2001 Article NF-1000 Introduction

SCC

AWPA I1-01 Introduction
AENOR UNE-CR 13425:2000 Geographic information. Fundamentals. Introduction.
AWWA ACE63119 Affordability Presentation
VDI 2870 BLATT 1-2012 Holistic production systems — basics, introduction and evaluation
DANSK DS/ISO 6336-1:2019 Calculation of load capacity of spur and helical gears – Part 1: Basic principles, introduction and general influence factors
VDI 2870 BLATT 1-2012 Holistic production systems — basics, introduction and evaluation
NS 4109:1979 Documentation — Presentation of periodicals
BS PP 7304:1991 Geometrical tolerancing. An introduction
BS PD IEC TR 63145-1-1:2018 Eyewear display-Generic introduction
DIN 820-2 Supplement 2:2000 Standardization - Part 2: Presentation of standards; examples for presentation of figures, tables and part lists
VDI 2520-1990 Introduction of corporate logistics; work plan

SSPC - The Society for Protective Coatings

CHAPTER 1.0-1993 Introduction

GB-REG

REG 7 CFR PART 90-2012 INTRODUCTION

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I-A SEC 1-1996 Introduction

US-FCR

FCR FED MP-3 PT I CHAP 1-1960 INTRODUCTION
FCR FED MP-3 PT II CHAP 1-1974 INTRODUCTION

International Telecommunication Union (ITU)

ITU-R BO.2007-1-1998 Considerations for the Introduction of Broadcasting Satellite Service High Definition Television Systems
ITU-T Q.1221-1997 Introduction to Intelligent Network Capability Set 2 (Study Group 11)
ITU-T Z.301-1988 INTRODUCTION TO THE CCITT MAN-MACHINE LANGUAGE
ITU-T A.2 FRENCH-2008 Presentation of contributions to ITU-T Pr閟entation des contributions ?l'UIT-T
ITU-T HDBK IC-1993 Introduction to Chill Study Group X; 89 pp
ITU-T HDBK IIT-1993 Instructions for the International Telephone Service
ITU-T A.2 CHINESE-2008 Presentation of contributions to ITU-T
ITU-T E.129 FRENCH-2002 Presentation of national numbering plans Pr閟entation des plans de num閞otage nationaux
ITU-T Z.311-1988 INTRODUCTION TO SYNTAX AND DIALOGUE PROCEDURES
ITU-T Q.1241-2001 Introduction to Intelligent Network Capability Set 4 Study Group 11
ITU-T Z.311 FRENCH-1988 INTRODUCTION TO SYNTAX AND DIALOGUE PROCEDURES

IPC - Association Connecting Electronics Industries

IPC TM-650 1.1C-2003 Introduction
IPC PE-74 SECTION 1- General Introduction

British Standards Institution (BSI)

BS ISO 6336-1:2006 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
BS ISO 6336-1:1996 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
BS ISO 6336-1:1997 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
BS ISO 6336-1:2019 Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors
BIP 0139-2013 An Introduction to ISO/IEC 27001:2013
PD IEC TR 63145-1-1:2018 Eyewear display. Generic introduction
BS ISO 21940-1:2019 Mechanical vibration. Rotor balancing. Introduction

International Organization for Standardization (ISO)

ISO 12213-1:1997 Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines
ISO 12213-1:2006 Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines
ISO 8:2019 Information and documentation — Presentation and identification of periodicals
ISO GUIDE 47:1986 Presentation of translations of ISO publications
ISO 2959:2011 Textiles - Woven fabric descriptions

Association Francaise de Normalisation

NF X20-528-1*NF EN ISO 12213-1:2009 Natural gas - Calculation of compression factor - Part 1 : introduction and guidelines
NF ISO 6336-1:2020 Calculation of the load capacity of spur and helical gears - Part 1: basic principles, introduction and general influencing factors
NF E23-030-1:2006 Calculation of load capacity of spur and helical gears - Part 1 : basic principles, introduction and general influence factors.
NF E23-030-1*NF ISO 6336-1:2020 Calculation of load capacity of spur and helical gears - Part 1: basic principles, introduction and general influence factors
FD P11-304:2020 Terrassements - Présentation des normes européennes
NF EN 62321-1:2014 Determination of certain substances in electrotechnical products - Part 1: introduction and presentation
FD X50-116:2003 Project management - Project based management - Presentation and implementation recommendations
NF Z41-006:1983 Introduction to theses and similar documents
NF E60-204*NF ISO 5169:2018 Machine tools - Presentation of lubrication instructions
NF U42-043*NF ISO 7409:2018 Fertilizers - Marking - Presentation and declarations
NF EN 15602:2022 Private security services - Vocabulary

Korean Agency for Technology and Standards (KATS)

KS I ISO 12213-1:2010 Natural gas－Calculation of compression factor－Part 1：Introduction and guidelines
KS B ISO 10300-1-2004(2019) Calculation of load capacity of bevel gears－Part 1：Introduction and general influence factors
KS B ISO 6336-1-2020 Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors
KS B ISO 6336-1-2015(2020) Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors
KS X ISO 8-2002(2012) Documentation－Presentation of periodicals
KS A ISO 128-1:2019 Technical drawings — General principles of presentation — Part 1: Introduction and index
KS B ISO 10300-1:2004 Calculation of load capacity of bevel gears－Part 1：Introduction and general influence factors
KS X ISO 8-2013 Documentation－Presentation of periodicals
KS B ISO 5169-2013 Machine tools－Presentation of lubrication instructions
KS X ISO 8:2013 Documentation－Presentation of periodicals
KS X ISO 8:2002 Documentation-Presentation of periodicals

CU-NC

NC 02-14-1967 Presentation of materials
NC 00-01-1967 Guide for the presentation of standards

BE-NBN

NBN 348-1956 Introduction of works
NBN 246-1951 Journal introduction
NBN 464-1958 Introduction to industrial and commercial directories
NBN 292-1952 Introduction to journal articles
NBN E 04-002-1976 Technical drawing. Introduction to spring
NBN 377-1956 Introduction to administrative and business idioms

BR-ABNT

ABNT NB-62-1971 Journal introduction
ABNT NB-61-1972 Introduction to journal articles

ESDU - Engineering Sciences Data Unit

ESDU 67001-1967 INTRODUCTION TO NOTATION
ESDU 89015-1989 Introduction to Data Items on flight path optimisation.
ESDU 90029 A-1993 An introduction to aircraft excrescence drag.
ESDU 87012-1987 An introduction to aircraft buffet and buffeting.
ESDU 78038 A-1979 Introduction to equations of motion for performance.
ESDU 67001 A-2003 Introduction to notation for aircraft dynamics.
ESDU 73018 A-1980 Introduction to estimation of range and endurance.
ESDU 81035-1981 An introduction to aircraft noise lateral attenuation.
ESDU 80030 A-1981 RADIAL@ MIXED AND AXIAL-FLOW PUMPS. INTRODUCTION
ESDU 80030 B-2003 Radial@ mixed and axial flow pumps. Introduction.

GM North America

GM GM9175P-2003 Power Factor of Dielectric Foundation Board

German Institute for Standardization

DIN EN ISO 128-1:2019 Technical product documentation (TPD) - General principles of presentation - Part 1: Introduction and fundamental requirements (ISO/DIS 128-1:2019); German and English version prEN ISO 128-1:2019

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 1.1-2003 Introduction Revision C

SE-SIS

SIS SS 03 88 03-1978 Documentation — Presentation of translations
SIS SMS 2399-1964 Gauge system for holes and shafts. Introduction
SIS SS-ISO 9946:1992 Manipulating industrial robots — Presentation of characteristics
SIS SMS 1919-1962 Relaxed introduction to form and position
SIS SMS 1718-1965 Uniform threads, fixed tolerances, introduction

PL-PKN

PN C99015 ArkusZ00-1975 Fundamentale photographic values Intoduction and scope of the standard
PN E88600-1986 Electrical relays General introduction
PN Z04165-01-1986 Air punty protection ests for methylbutylketone ntroduction and scope of the tandard
PN Z04177-01-1987 Air purity protection ests for iV-phenylnaphtylamine ntroduction and scope f the standard
PN C04639-01-1989 Water and waste water Tests for nitrobenzene Introduction and scopeof the standard
PN Z04193-01-1988 Air purity protectionTests for Smethylcarbamyl chloride Introduction and scope of the standard
PN Z04190-01-1988 Air punty protecticra ests for nitrodipheny ntroduction and scope of the standard
PN Z04167-01-1986 Air purity protection ests for methoxyethyl alcohol ntroduction and scope f the standard
PN Z04189-01-1988 Air purity protection ests for aminodiphenyl ntroduction and scope of the tandard
PN C87007 ArkusZ00-1974 Calcium fertilizers Introduction and scope of standard
PN C87007-01-1993 Calcium fertilizers Introduction and scope of standard
PN C87080-1993 Fertilizers. Marking. Presentation and declarations
PN Z04150-01-1985 Air purity protection Tests for nitropropanes Introduction and scope of the standard

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

RESOLUTION 33-1-2000 Presentation of texts on terminology

American Society of Quality Control （ASQC)

ASQ S2-1995 Introduction to Attribute Sampling T56

YU-JUS

JUS Z.A4.015-1981 Documentation. Presentation of translations
JUS Z.A4.020-1981 Documentation. Presentation of periodicals

GSO

OS GSO ISO 6336-1:2013 Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors
OS GSO ISO 8:1995 Documentation - Presentation of periodicals.
BH GSO ISO 7409:2022 Fertilizers — Marking — Presentation and declarations
GSO ISO 5169:2016 Machine tools -- Presentation of lubrication instructions
GSO ISO 7409:2021 Fertilizers — Marking — Presentation and declarations
OS GSO ISO 5169:2016 Machine tools -- Presentation of lubrication instructions
OS GSO 604:1995 Documentation - Presentation of contributions to periodicals

VDI - Verein Deutscher Ingenieure

VDI 2815 Blatt 1-1978 Terms of production engineering and control; introduction@ base register

KR-KS

KS A ISO 128-1-2019 Technical drawings — General principles of presentation — Part 1: Introduction and index

Consumer Electronics Association （U.S.)

CEA-600.10-1999 Introduction to the CEBus Standard
CEA-633.10-1999 Introduction to EIA-600 Conformance Specification

Danish Standards Foundation

DS/INF 59:1990 Introduction to the ISO-standard STEP
DS-hæfte 28:2009 Introduction to playground safety
DS/INF 18:1983 An introduction to open systems interconnection

AENOR

UNE 50101:1990 DOCUMENTATION. PRESENTATION OF PERIODICALS

Lithuanian Standards Office

LST ISO 8:2000 Documentation. Presentation of periodicals
LST ISO 2384:2003 Documentation. Presentation of translations (idt ISO 2384:1977)

Standard Association of Australia （SAA）

AS 1359.0:1998 Rotating electrical machines - General requirements - Introduction and list of Parts

AWS - American Welding Society

RWVID-1999 RWVID Introduction to Resistance Welding DVD

TIA - Telecommunications Industry Association

TIA/EIA/IS-2000.1-C-2002 Introduction to cdma2000 Spread Spectrum Systems
TIA/EIA-136.100-1999 TDMA Cellular/PCS; Introduction to Channels
TIA/EIA-136-100-A-1999 TDMA Cellular PCS; Introduction to Channels
TIA/EIA/IS-2000.1-A-2000 Introduction to cdma2000 Standards for Spread Spectrum Systems (***Addendum 1 Does not apply to the TIA/EIA/IS-2000.1-A - Please see TIA/EIA/IS-2000.2-A thru TIA/EIA/IS-2000.5-A for the Addendum 1***)
TIA/EIA/IS-2000-1-1999 Introduction to cdma2000 Standards for Spread Spectrum Systems
TIA/EIA-136-100-B-2000 TDMA Third Generation Wireless – Introduction to Channels

NO-SN

NS 4109-1979 Documentation - Presentation of periodicals

(U.S.) Telecommunications Industries Association

TIA-2000.1-D-2004 Introduction to cdma2000 Spread Spectrum Systems
TIA-664.000-B-1[E]-2006 Wireless Features Description: Introduction
TIA-664 SERIES-2007 Wireless Features Description
TIA-664.000-B-2003 Wireless Features Description ?Introduction
TIA-41.000-E-3-2006 Introduction to Mobile Application Part (MAP) Addendum 3 to TIA-41.000-E
TIA-2000.1-C-1[E]-2005 Introduction to cdma2000 Spread Spectrum Systems ?Addendum
TIA-2000.1-F-2013 Introduction to cdma2000 Standards for Spread Spectrum Systems
TIA-2000.1-D-1[E]-2006 Introduction to cdma2000 Spread Spectrum Systems ?Addendum 1
TIA-41.000-E-1-2006 Introduction to Mobile Application Part (MAP) Addendum 1 to TIA-41.000-E

CZ-CSN

CSN 01 3122-1980 Tecbnical drawings. Projection mctbods. Genclal principles of presentation
CSN ISO 7409:1994 Fertilizers. Marking. Presentation and declarations

CEN - European Committee for Standardization

EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings