Warehouse timer range

Warehouse timer range, Total:90 items.

The international standard classification for "Warehouse timer range" includes: Measurement of time, velocity, acceleration, angular velocity , Hydraulic energy engineering .

The Chinese standard classification for "Warehouse timer range" includes: Time and Frequency Measurement , Technical management , Water conservancy and water power engineering in general , Water power engineering , Industrial construction engineering .

National Metrological Verification Regulations of the People's Republic of China

JJG 2007-1987 Time and Frequency Measuring Insrtuments
JJG 2007-2007 Verification Scheme of Time and Frequency Measuring Instruments
JJG 1065-2011 IC Card Timing and Charging Device for Water Saving
JJG(轻工) 112-1996 Calibration rules for calorimeters of room air conditioners
JJG(石油) 20-2000 Verification regulation of reckon by time for meter in the oil well
JJG 2007-2015 Verification Scheme of Time and Frequency Measuring Instruments

Professional Standard - Aviation

HB 6728-1993 Store Management in Production Process

Beijing Provincial Standard of the People's Republic of China

DB11/T 638-2023 Quantity calculation standards for house renovation projects
DB11/T 638-2009 Specification of Valuation with Bill Quantity in House Renovation Engineering
DB11/T 638-2016 Specifications for Calculation of Quantity of Housing Repair Engineering

Taiwan Provincial Standard of the People's Republic of China

CNS 11434-1985 Watt-Hour Meters (for Connection Through Instrument Transformer) Inspection Signal Generator
CNS 11430-1985 Watt-Hour Meters (for Direct Connection) Inspection Signal Generator
CNS 14609-2001 Time-of-Use registers

Group Standards of the People's Republic of China

T/CCEAS 002-2022 Standard method of measurement of building works in EPC and DB projects
T/ZS 0461-2023 Application code for BIM measurement of housing construction project cost

Military Standard of the People's Republic of China-General Armament Department

GJB 9549-2018 Safety requirements for design of factories and warehouses for composite solid propellants and their products

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 50854-2013 Standard method of measurement for building construction and fitting-out works

Professional Standard - Archives

DA/T 81-2019 Technical specifications for monitoring of archival repository air quality

Professional Standard - Commodity Inspection

SN/T 2526-2010 Rules for methyl bromide chamber fumigation of fresh cut-flower

Professional Standard - Electricity

DL/T 5381-2007 Design specifications for cleaning of reservoir zone of hydroelectric project

国家能源局

NB/T 10803-2021 Code for Design of Reservoir Basin Clearance for Hydropower Projects

Hubei Provincial Standard of the People's Republic of China

DB42/T 2098-2023 Spatiotemporal big data platform database construction procedures

National Metrological Technical Specifications of the People's Republic of China

JJF 1261.2-2010 Rules of Metrology Testing for Energy Efficiency Label of Room Air Conditioners
JJF 1261.2-2017 Rules of Metrology Testing for Energy Efficiency of Room Air Conditioners

Professional Standard - Education

JY 37-1979 simple timer
JY/T 0390-2007 Electric Spark Timer

Professional Standard - Water Conservancy

SL 106-1996 Design criterion of reservoir management
SL 106-2017 SL/T 106-2017 Specifications for reservoir management design
SL 106-1996（条文说明） Design criterion of reservoir management(explanation)

Shandong Provincial Standard of the People's Republic of China

DB37/T 1342-2021 Design code for plain reservoir project

水利部

SL/T 106-2017 Reservoir engineering management design specifications

未注明发布机构

DIN 18041:1968 Acoustic quality in rooms - Specifications and instructions for the room acoustic design
ANSI/TIA-41.690-E-2012 Mobile Application Part (MAP) - Operation Timer Values

中国石油天然气总公司

SY/T 5786-1993 Specifications for the equipment of measuring instruments in petroleum enterprise material supply warehouses

Professional Standard - Recommended Standards for Engineering Construction

CECS 150-2003 Specification for design of efficient coal-fired boiler houses

Henan Provincial Standard of the People's Republic of China

DB41/T 2553-2023 Highway housing construction project design guide

Guangdong Provincial Standard of the People's Republic of China

DB44/T 2049-2017 Intelligent timing metering water control equipment

Association Francaise de Normalisation

NF C42-310:1971 MEASURING INSTRUMENTS. HOUR METERS.
NF R63-703:1987 Garage tools - Pedometers
NF P50-762:2005 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - simplified methods.
NF EN ISO 3382-2:2010 Acoustics - Measurement of acoustic parameters of rooms - Part 2: reverberation time of ordinary rooms
NF S31-012-2*NF EN ISO 3382-2:2010 Acoustics - Measurement of room acoustic parameters - Part 2 : reverberation time in ordinary rooms

Military Standards (MIL-STD)

DOD A-A-53098-1987 CALIBRATOR, TIMER
DOD A-A-54032-1989 REFRIGERATOR, MORTUARY MOBILE, TWO BODY CAPACITY

Japanese Industrial Standards Committee (JISC)

JIS B 8940:1978 General design rules for automatic highrised warehouse
JIS A 3304:1994 Standard of structural design systems on the prefabricated temporary houses

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C12.13-1991 Electronic time-of-use registers for electricity meters

US-FCR

FCR COE ER 1110-1-11-1975 ENGINEERING AND DESIGN ENGINEERING COMPUTER PROGRAMS LIBRARY
FCR FED H-08-4 VOL 3 SEC III 710-1993 FLOWMETER, OIL HEATER, DRIP TRAP SCHEDULES
FCR COE EM 1110-2-1602-1980 HYDRAULIC DESIGN OF RESERVOIR OUTLET WORKS
FCR COE ER 37-1-20-1981 TIMEKEEPING, PAY AND LEAVE ACCOUNTING PROCEDURES

SCC

BS 5112-1:1974 Time measurement instruments: chronometers requirements for wrist chronometers with spring balance resonator
VDI 4492-2006 Application of inventory procedures in computer-managed warehouses
DANSK DS/EN ISO 3382-2/AC:2008 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms
CAN 2-26.3-M77-1977 Kitchen measuring instruments, metric

Korean Agency for Technology and Standards (KATS)

KS F 5301-2000 STANDARD OF STRUCTURAL DESIGN SYSTEMS ON THE PREFABRICATED TEMPORARY HOUSES
KS V 4041-2008 Boatswain store hatches
KS V 4041-2013 Boatswain store hatches
KS C 4522-1986 Mechanical timer
KS C 4522-1986(2021) Mechanical timer
KS C IEC 60145:2003 Var－hour(reactive energy) meters
KS C 4522-1986(2016) Mechanical timer
KS F 2864-2022 Measurement of the reverberation time of rooms with reference to the other acoustical parameters

U.S. Air Force

AIR FORCE A-A-50729 VALID NOTICE 1-2012 Meter, Multiple Scale
AIR FORCE MS27650 REV F-1973 METER, TIME TOTALIZING HERMETICALLY SEALED 26VDC 400HZ

RO-ASRO

STAS SR ISO 3159:1994 Timekeeping instruments. Wrist-chronometers with spring balance oscillator

SG-SPRING SG

SS 547-2009 Code of practice for temporary housing quarters on construction sites

KR-KS

KS F ISO 3382-2-2018(2023) Measurement of room acoustics parameters — Part 2:Reverberation time in ordinary rooms
KS C 4513-1992(2023) electric timer

United States Navy

NAVY MIL-C-24189 (2)-1966 COUNTER-TIMER, ELECTRONIC, LOW FREQUENCY
NAVY MIL-C-24189-1965 COUNTER-TIMER, ELECTRONIC, LOW FREQUENCY

Defense Logistics Agency

DLA SMD-5962-87520 REV D-2005 MICROCIRCUIT, PROGRAMMABLE INTERVAL TIMER, MONOLITHIC SILICON

German Institute for Standardization

DIN EN 61523-2:2003 Delay and power calculation standards - Part 2: Pre-layout delay calculation specification for CMOS ASIC libraries (IEC 61523-2:2002); German version EN 61523-2:2002, text in English
DIN EN ISO 3382-2 Berichtigung 1:2009-09 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008); German version EN ISO 3382-2:2008, Corrigendum to DIN EN ISO 3382-2:2008-09; German version EN ISO 3382-2:2008/AC:2009
DIN EN ISO 3382-2:2008-09 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008); German version EN ISO 3382-2:2008
DIN 18041:2016-03 Acoustic quality in rooms - Specifications and instructions for the room acoustic design
DIN EN ISO 3382-2:2008 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008); German version EN ISO 3382-2:2008
DIN 8286:1970 Shaft ends for timepieces

British Standards Institution (BSI)

Silos-1987 Draft design code for silos, bins, bunkers and hoppers
BS EN ISO 3382-2:2008 Acoustics — Measurement of room acoustic parameters — Part 2: Reverberation time in ordinary rooms
BS EN ISO 3382-2:2008(2009) Acoustics — Measurement of room acoustic parameters — Part 2 : Reverberation time in ordinary rooms
BS 8541-3:2012 Library objects for architecture, engineering and construction. Shape and measurement. Code of practice

ES-UNE

UNE-EN ISO 3382-2:2008 ERRATUM:2009 V2 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008/Cor 1:2009)

International Organization for Standardization (ISO)

ISO 3382-2:2008 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms

GSO

BH GSO ISO 3382-2:2016 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms
OS GSO ISO 3382-2:2013 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms

Danish Standards Foundation

DS/EN ISO 3382-2/AC:2010 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms
DS/EN ISO 3382-2:2008 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms

European Committee for Standardization (CEN)

EN ISO 3382-2:2008 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008)

Construction department of Hebei province

DB13(J)/T 34-2002 Code for design of steel structures for light buildings

Others: