Gas phase injector settings

Gas phase injector settings, Total:116 items.

The international standard classification for "Gas phase injector settings" includes: Other standards related to optics and optical measurements , Workplace atmospheres , Wastes , Waxes, bituminous materials and other petroleum products .

The Chinese standard classification for "Gas phase injector settings" includes: chromatograph , Labor sanitation , Environmental protection equipment , Petroleum wax .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38125-2019 Autosampler for liquid chromatography

Professional Standard - Environmental Protection

HJ 789-2016 Water quality - Determination of Acetonitrile - Direct injection/Gas chromatography
HJ 1261-2022 Stationary source emission―Determination of benzene and its analogies ―Bags sampling/Direct injection―gas chromatography
HJ 604-2017 Ambient air - Determination of total hydrocarbons, methane and nonmethane hydrocarbons - Direct injection/Gas chromatography

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16060-1995 Workplace air--Determination of butanone--Direct injection gas chromatographic method
GB/T 16040-1995 Workplace air―Determination of butadiene―Direct injection gas chromatographic method
GB/T 16067-1995 Workplace air--Determination of ethyl acetate--Direct injection gas chromatographic method
GB/T 16052-1995 Workplace air―Determination of styrene―Direct injection gas chromatographic method
GB/T 16098-1995 Workplace air--Determination of acrylonitrile--Direct injection gas chromatographic method
GB/T 16091-1995 Workplace air--Determination of chloroprene--Direct injection gas chromatographic method
GB/T 16049-1995 Workplace air--Determination of xylene--Direct injection gas chromatographic method
GB/T 16065-1995 Workplace air--Determination of butyl alcohol--Direct injection gas chromatographic method
GB/T 16079-1995 Workplace air--Determination of methylene chloride--Direct injection gas chromatographic method
GB/T 16074-1995 Workplace air--Determination of ethylene oxide--Direct injection gas chromatographic method
GB/T 16058-1995 Workplace air―Determination of acetone―Direct injection gas chromatographic method
GB/T 16094-1995 Workplace air--Determination of tetrafluoroethylene--Direct injection gas chromatographic method
GB/T 16087-1995 Workplace air―Determination of vinyl chloride―Direct injection gas chromatographic method(DNP)
GB/T 16046-1995 Workplace air--Determination of toluene--Direct injection gas chromatographic method
GB/T 16080-1995 Workplace air--Determination of trichloromethane--Direct injection gas chromatographic method
GB/T 16070-1995 Workplace air--Determination of amyl acetate--Direct injection gas chromatographic method
GB/T 16078-1995 Workplace air―Determination of methyl chloride―Direct injection gas chromatographic method
GB/T 16095-1995 Workplace air―Determination of acetonitrile―Direct injection gas chromatographic method
GB/T 16086-1995 Workplace air―Determination of dichloroethane―Direct injection gas chromatographic method(PEG 20M)
GB/T 16062-1995 Workplace air--Determination of methyl alcohol--Direct injection gas chromatographic method
GB/T 16064-1995 Workplace air--Determination of propyl alcohol--Direct injection gas chromatographic method
GB/T 16041-1995 Workplace air--Determination of cyclohexane--Direct injection gas chromatographic method
GB/T 16085-1995 Workplace air―Determination of dichloroethane―Direct injection gas chromatographic method
GB/T 16082-1995 Workplace air--Determination of carbon tetrachloride--Direct injection gas chromatographic method
GB/T 16066-1995 Workplace air―Determination of methyl acetate―Direct injection gas chromatographic method
GB/T 16090-1995 Workplace air--Determination of allyl chloride--Direct injection gas chromatographic method
GB/T 16071-1995 Workplace air―Determination of ethyl ether―Direct injection gas chromatographic method
GB/T 16038-1995 Workplace air--Determination of solvent naphthas--Direct injection gas chromatographic method
GB/T 16043-1995 Workplace air--Determination of benzene--Direct injection gas chromatographic method
GB/T 16069-1995 Workplace air--Determination of butyl acetate--Direct injection gas chromatographic method
GB/T 16068-1995 Workplace air--Determination of propyl acetate--Direct injection gas chromatographic method
GB/T 16076-1995 Workplace air--Determination of epichlorohydrin--Direct injection gas chromatographic method
GB/T 16088-1995 Workplace air―Determination of vinyl chloride―Direct injection gas chromatographic method (PEG 6000)
GB/T 16084-1995 Workplace air--Determination of methyl bromide--Direct injection gas chromatographic method

Professional Standard - Hygiene

WS/T 166-1999 Workplace air. Determination of methyl formate and ethyl formate. Direct sampling-gas chromatographic method
WS/T 71-1996 Workplace air. Determination of propenol. Direct injection gas chromatographic method

国家医药管理局

YY/T 0088-1992 Microsampler

Professional Standard - Machinery

JB/T 10983-2010 Special equipment of wet flue gas desulphurization system-Side entry mixer

Group Standards of the People's Republic of China

T/CAQI 247-2022 Testing apparatus of gas turbine inlet air filter
T/QGCML 1651-2023 Automatic micro-sampling equipment pipette calibration device

Professional Standard - Medicine

YY 0088-1992 Electrophoresis device

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 971-2015 Determination of Methanol in Water by Static Headspace/Direct Injection Gas Chromatography

未注明发布机构

ASTM RR-D01-1022 1979 D3792-Test for Water Content of Waterborne Paints by Direct Injection into a Gas Chromatograph
ASTM RR-D01-1027 1980 D3792-Test for Water Content of Waterborne Paints by Direct Injection into a Gas Chromatograph
DIN EN 16423 E:2012-04 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection

Professional Standard - Petrochemical Industry

SH/T 0707-2001 Determination of benzene and toluene in petroleum waxes using headspace gas chromatography with flame ionization detection

Professional Standard - Energy

NB/SH/T 0707-2016 Determination of benzene and toluene in petroleum waxes using headspace gas chromatography

国家能源局

SH/T 0707-2016 Determination of benzene and toluene content in paraffin wax by headspace sampling gas chromatography

American Society for Testing and Materials (ASTM)

ASTM UOP709-70 Gas Analysis by Gas Chromatography Using a Two - Injection Technique
ASTM D7606-24 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
ASTM D6538-00(2005) Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D6538-12(2019) Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D6538-12 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D6538-00 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D6060-96(2001) Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph
ASTM D6062-19 Standard Guide for Personal Samplers of Health-Related Aerosol Fractions
ASTM D3695-88 Standard Test Method for volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatogrpahy

Association Francaise de Normalisation

NF EN 12838:2000 Installations et équipements relatifs au gaz naturel liquéfié - Essais d'aptitude à l'emploi des systèmes d'échantillonnage du GNL
NF M41-017*NF EN 16423:2014 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
NF ISO 7382:1987 Éthylène à usage industriel - Échantillonnage en phase liquide et en phase gazeuse.
NF E29-179:2002 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar.
NF T20-817*NF ISO 7382:1987 Ethylene for industrial use. Sampling in the liquid and the gaseous phase.
NF X20-251:1982 Analysis of gases. Devices for the sampling of gases and their transfer to an analytical unit.
NF EN 334/IN1:2009 Gas pressure regulating devices (regulators) for inlet pressures up to 100 bar

RU-GOST R

GOST R 54824-2011 Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 500 mbar
GOST R 54823-2011 Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar

British Standards Institution (BSI)

BS EN 16423:2013 Liquefied petroleum gases. Determination of dissolved residue. Gas chromatographic method using liquid, on-column injection
BS ISO 17736:2010 Workplace air quality. Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
BS ISO 7382:2023 Ethylene for industrial use. Sampling in the liquid and the gaseous phase
BS EN 14382:2005+A1:2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar

SCC

NS-EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
UNE-EN 13787:2003 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar.
NS-EN 16423:2013 Liquefied petroleum gases — Determination of dissolved residue — Gas chromatographic method using liquid, on-column injection
DANSK DS/EN 16423:2013 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
BS 1756-3:1965 Methods for the sampling and analysis of flue gases. Analysis by the Haldane apparatus
DIN EN 16423 E:2012 Draft Document - Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection; German version prEN 16423:2012
DANSK DS/ISO 24072:2023 Aerosol bacterial retention test method for air-inlet filter on administration devices

Lithuanian Standards Office

LST EN 13787-2002 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar

Danish Standards Foundation

DS/EN 13787:2002 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar

German Institute for Standardization

DIN EN 16423:2014-02 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection; German version EN 16423:2013
DIN EN 16423:2014 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection; German version EN 16423:2013

American National Standards Institute （ANSI)

ANSI/ISA S67.04-1-1994 Setpoints for Nuclear Safety-Related Instrumentation
ANSI/ASTM D6060:2001 Practice for Sampling of Process Vents with a Portable Gas Chromatograph
ANSI/ISA 67.04.01-2006 Setpoints for Nuclear Safety-Related Instrumentation

Korean Agency for Technology and Standards (KATS)

KS A ISO 9894-2022 Subsampling of uranium hexafluoride in the liquid phase
KS M ISO 7382:2002 Ethylene for industrial use-Sampling in the liquid and the gaseous phase
KS M ISO 7382:2013 Ethylene for industrial use－Sampling in the liquid and the gaseous phase
KS M ISO 7382-2013 Ethylene for industrial use－Sampling in the liquid and the gaseous phase
KS B 8213-2019 Pressure regulators and associated safety devices for gas appliances－Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
KS M ISO 3427-2002(2012) Gaseous halogenated hydrocarbons(liquefied gases)?Taking of a sample
KS A ISO 9894-2012(2017) Subsampling of uranium hexafluoride in the liquid phase

GSO

GSO ISO 9894:2017 Subsampling of uranium hexafluoride in the liquid phase
OS GSO ISO 9894:2017 Subsampling of uranium hexafluoride in the liquid phase
OS GSO ISO 7382:2008 Ethylene for industrial use - Sampling in the liquid and the gaseous phase

AWS - American Welding Society

F1.1-1985 METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSES

International Organization for Standardization (ISO)

ISO/PRF 7382 Ethylene for industrial use — Sampling in the liquid and the gaseous phase
ISO 7382:2023 Ethylene for industrial use — Sampling in the liquid and the gaseous phase
ISO 7382:1986 Ethylene for industrial use; Sampling in the liquid and the gaseous phase
ISO 6712:1982 Gas analysis — Sampling and transfer equipment for gases supplying an analytical unit
ISO/PRF 24072 Aerosol bacterial retention test method for air-inlet filter on administration devices

Japanese Industrial Standards Committee (JISC)

JIS A 1968:2005 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Pumped sampling
JIS A 1968:2015 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Pumped sampling
JIS A 1969:2015 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Diffusive sampling
JIS A 1969:2005 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Diffusive sampling
JIS A 1967:2005 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Diffusive sampling
JIS A 1966:2015 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Pumped sampling
JIS A 1967:2015 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Diffusive sampling
JIS A 1966:2005 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Pumped sampling

HU-MSZT

MSZ KGST 2359-1980 Sampling of photographic equipment

Standard Association of Australia （SAA）

ISO 24072:2023 Aerosol bacterial retention test method for air-inlet filter on administration devices

US-HI

HI 9.8-1998 Pump Intake Design

European Committee for Standardization (CEN)

EN 13787:2001 Elastomers for Gas Pressure Regulators and Associated Safety Devices for Inlet Pressures Up to 100 Bar

Others: