Martin body shape measuring ruler

Martin body shape measuring ruler, Total:159 items.

The international standard classification for "Martin body shape measuring ruler" includes: Volumetric equipment and measurements , Clothes , Headgear. Clothing accessories. Fastening of clothing , Ergonomics , Medical Sciences and health care facilities in general .

The Chinese standard classification for "Martin body shape measuring ruler" includes: Oil and gas gathering and transportation equipment , Clothing, footgear and headwear in general , Hydraulic and pneumatic device , Human Engineering , Nutrition sanitation .

Military Standard of the People's Republic of China-General Armament Department

GJB 6896-2009 Static 3D human dimensions of male pilot population

Group Standards of the People's Republic of China

T/CAPPD 8-2021 Definition and method of anthropometric measurements for clothing for physically disabled persons
T/CNGA 40-2022 Remote measuring of human body size for clothing ——Basic requirements
T/CKIA 2-2019 Definition and method of anthropometric measurement for bras

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5704.1-1985 Measuring instruments for anthropometry--Anthropometer
GB/T 17837-1999 Clothes--Survey methed for human body head round and size designation for headwear
GB/T 17491-1998 Hydraulic fluid power--Positive displacement pumps ,motors and integral transmissions--Determination of steady-state performance
GB/T 16160-2017 Anthropometric definitions and methods for garment
GB/T 5704-2008 Measuring instruments for anthropometry
GB/T 5704.2-1985 Measuring instruments for anthropometry--Sliding caliper for anthropometry
GB/T 5704.3-1985 Measuring instruments for anthropometry--Spreading caliper for anthropometry
GB/T 17286.4-2006 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 4: Guide for operators of pipe provers
GB/T 5704.4-1985 Measuring instruments for anthropometry--Coordinate caliper for anthropometry

Professional Standard - Textile

FZ/T 80010-2007 Clothes-survey method for human body head round and size designation for headwear
FZ/T 80010-2006 Clother -- Survery method for human body head round and size designation for headwear

National Metrological Verification Regulations of the People's Republic of China

JJG(铁道) 198-2008 Dynamic Deformation Modulus EVD Tester

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 22044-2017 Anthropometric definitions and methods for infants garment

Professional Standard - Public Safety Standards

GA/T 1584-2019 Forensic sciences -- Technical specifications for morphological inspection of sex based on human pubis

未注明发布机构

DIN EN 4730 E:2018-01 Aerospace series - Anthropometric dimensioning of aircraft seats

Professional Standard - Hygiene

WS/T 424-2013 Anthropometric measurements method in health surveillance

Korean Agency for Technology and Standards (KATS)

KS A ISO 8559:2008 Garment construction and anthropometric surveys－Body dimensions
KS K ISO 8559-1:2019 Size designation of clothes — Part 1: Anthropometric definitions for body measurement
KS A ISO 8559-2022 Garment construction and anthropometric surveys－Body dimensions
KS A 7003-1999 Garment Construction and Anthropometric Measurements - Body Measurements
KS A ISO 8559-2008(2018) Garment construction and anthropometric surveys－Body dimensions
KS R 0018-2014 Measuring method of automobile exterior dimensions
KS R 0018-1971 Measuring method of automobile exterior dimensions

International Organization for Standardization (ISO)

ISO 8559:1989 Garment construction and anthropometric surveys; body dimensions
ISO 7278-4:1999 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 4: Guide for operators of pipe provers
ISO 3635:1981 Size designation of clothes; Definitions and body measurement procedure
ISO 3635:1979 Title missing - Legacy paper document
ISO 3635:1977 Title missing - Legacy paper document
ISO 8559-5:2023 Size designation of clothes — Part 5: Anthropometric measurements for the head and face
ISO/FDIS 8559-5:2021 Size designation of clothes — Part 5: Anthropometric definitions for the head and face
ISO 9424:1989 Wood-based panels; determination of dimensions of test pieces
ISO 8559-4:2023 Size designation of clothes — Part 4: Determination of the coverage ratios of body measurement tables
ISO 8041:2005 Human response to vibration - Measuring instrumentation

IT-UNI

UNI 2650-1944 Anthropometric properties of men's clothing. Characteristics of each category and form
UNI 4813-1961 Inspection and measurement tools. T-shaped ruler. side square
UNI EN ISO 8559-1:2021 Size designation of clothes - Part 1: Anthropometric definitions for body measurement
UNI ISO 4409:2020 Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance

Association Francaise de Normalisation

NF T51-070:1974 Plastics. Determination of heat deformation. Martens test.
NF EN ISO 8559-1:2020 Designation of clothing sizes - Part 1: anthropometric definitions for body measurement
NF S92-501:2013 Medical biology laboratory - Anthroporadiometric measurements - Whole body - Measurements of gamma emissions with energy greater than 100 keV
NF G03-001:1977 CLOTHING. BODY MEASUREMENT. VOCABULARY DIAGRAMS-SIZE PICTOGRAMS.
NF L46-013:1986 Joints toriques - Élastomère butadiene-nitrile acrylique 21A7 - Classe de précision A - Classe de qualité 3.
NF L61-030*NF EN 4730:2018 Aerospace series - Anthropometric dimensioning of aircraft seats
NF M03-024:1982 COAL. DETERMINATION OF THE CONTENTS OF THE DIFFERENT FORMS OF SULPHUR.
NF X35-003-1:2010 Basic human body measurements for technological design - Part 1 : body measurement definitions and landmarks.
NF EN 547-3+A1:2008 Sécurité des machines - Mesures du corps humain - Partie 3 : données anthropométriques
NF EN 547-3/IN1:2008 Sécurité des machines - Mesures du corps humain - Partie 3 : données anthropométriques
NF ISO 157:1999 Coal - Determination of the content of different forms of sulfur
NF EN 4730:2018 Série aérospatiale - Dimensionnement anthropométrique des sièges passagers d'avion
NF X35-107-1*NF EN 547-1+A1:2008 Safety of machinery - Human body measurements - Part 1 : principles for determining the dimensions required for openings for whole body access into machinery
NF X35-002:1982 Male and Female Population Anthropometric Model
NF X35-107-3:1997 Safety of machinery. Human body measurements. Part 3 : anthropometric data.
NF X35-107-3/IN1*NF EN 547-3/IN1:2008 Safety of machinery - Human body measurements - Part 3 : anthropometric data
NF X35-107-3*NF EN 547-3+A1:2008 Safety of machinery - Human body measurements - Part 3 : anthropometric data

ZA-SANS

SANS 10184:2008 Definitions for and measurement of body dimensions

German Institute for Standardization

DIN 33402-1:1978 Body dimensions of people; terms and definitions, measuring procedures
DIN EN ISO 8559-1:2021-04 Size designation of clothes - Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017); German version EN ISO 8559-1:2020
DIN EN 547-3:2009 Safety of machinery - Human body measurements - Part 3: Anthropometric data; German version EN 547-3:1996+A1:2008
DIN 33402-1:2008-03 Ergonomics - Body dimensions of people - Part 1: Terms and definitions, measuring procedures
DIN SPEC 33402-6:2015-06 Ergonomics - Human body dimensions - Part 6: Guidelines on the correct selection and application of anthropometric data
DIN EN 4730:2019 Aerospace series - Anthropometric dimensioning of aircraft seats; German and English version EN 4730:2018
DIN EN 547-1:2009 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery; German version EN 547-1:1996+A1:2008
DIN EN 4730:2019-04 Aerospace series - Anthropometric dimensioning of aircraft seats; German and English version EN 4730:2018
DIN 33402-1:2008 Ergonomics - Body dimensions of people - Part 1: Terms and definitions, measuring procedures
DIN EN 547-3:2009-01 Safety of machinery - Human body measurements - Part 3: Anthropometric data; German version EN 547-3:1996+A1:2008 / Note: DIN EN 547-3 (1997-09) remains valid alongside this standard until 2009-12-28.
DIN SPEC 33402-5:2010 Ergonomie - K?rperma?e des Menschen - Untersuchung der Verfa
DIN EN 547-2:2009 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings (includes Amendment A1:2008); English version of DIN EN 547-2:2009-01

GSO

OS GSO ISO 8559:2014 Garment construction and anthropometric surveys -- Body dimensions
GSO ISO 12947-3:2013 Textiles -- Determination of the abrasion resistance of fabrics by the Martindale method -- Part 3: Determination of mass loss
GSO ISO 24698-1:2013 Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Part 1: Combustion (Dumas) method
OS GSO EN 547-3:2011 Safety of machinery - Human body measurements - Part 3: Anthropometric data
OS GSO ISO 4409:2015 Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance
BH GSO ISO 4409:2016 Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance

KR-KS

KS K ISO 8559-1-2019 Size designation of clothes — Part 1: Anthropometric definitions for body measurement

British Standards Institution (BSI)

BS EN ISO 8559-1:2020 Size designation of clothes - Anthropometric definitions for body measurement
BS ISO 8559-5:2023 Size designation of clothes - Anthropometric measurements for the head and face
BS EN 4730:2018 Aerospace series. Anthropometric dimensioning of aircraft seats
BS EN 547-3+A1:1997 Safety of machinery. Human body measurements. Anthropometric data
BS EN 547-3:1997 Safety of machinery - Human body measurements - Anthropometric data
BS EN ISO 12947-3:1998 Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Determination of mass loss
BS ISO 8559-1:2017 Size designation of clothes. Anthropometric definitions for body measurement
BS EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3.Anthropometric data
BS EN 547-1:1996 Safety of machinery - Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery
BS EN 547-1+A1:1997 Safety of machinery. Human body measurements. Principles for determining the dimensions required for openings for whole body access into machinery
BS EN ISO 7250-1:2010 Basic human body measurements for technological design - Body measurement definitions and landmarks
BS 8420:2003 Methods of measuring irregularities on surfaces of roads, footways and other paved areas using straightedges and wedges

SCC

BS 4467:1969 Anthropometric and ergonomic recommendations for dimensions in designing for the elderly
DANSK DS/ISO 8559-1:2017 Size designation of clothes – Part 1: Anthropometric definitions for body measurement
DANSK DS/EN ISO 8559-1:2020 Size designation of clothes – Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017)
NS-EN ISO 8559-1:2020 Size designation of clothes — Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017)
NS-EN 4730:2018 Aerospace series — Anthropometric dimensioning of aircraft seats
AENOR UNE-EN 547-3+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data
DIN EN 4730 E:2018 Draft Document - Aerospace series - Anthropometric dimensioning of aircraft seats; German and English version FprEN 4730:2017
BS PD CEN ISO/TR 7250-2:2024 Basic human body measurements for technological design-Statistical summaries of body measurements from national populations
AS/NZS 2106.2:1999 Methods for the determination of the flash point of flammable liquids (closed cup), Part 2: Pensky-Martens closed cup method

RO-ASRO

STAS 5488-1980 LIQUID PETROLEUM PRODUCTS Determination of flammability point in penskymartens closed vessel
STAS 4855-1980 Earth measurements BASIC TOPOGRAPHIC PLANS Sizes
STAS 3332-1981 MEASURING PINS FOR TOPOGRAPHIC SURVEYING IN MINES Dimensions

Danish Standards Foundation

DS/EN ISO 8559-1:2020 Size designation of clothes – Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017)
DS/EN 547-3+A1:2011 Safety of machinery - Human body measurements - Part 3: Anthropometric data

PL-PKN

PN-EN ISO 8559-1-2021-06 E Size designation of clothes -- Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017)
PN M73321-1989 Hydraulic fluid power Positive displacement pumps, motors and integral transmissions Determination of steadystate performance

Japanese Industrial Standards Committee (JISC)

JIS F 4324:1996 Small crafts -- Outboard motors -- Static thrust measurement
JIS Z 8500:1994 Ergonomics -- Anthropometric and biomechanic measurements

BE-NBN

NBN T 04-509-1985 Butadiene for industrial use - Determination of oxygen and argon in the gaseous phase above liquid butadiene - Gas chromatographie method

ES-UNE

UNE-EN ISO 8559-1:2021 Size designation of clothes - Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017)
UNE-EN 4730:2018 Aerospace series - Anthropometric dimensioning of aircraft seats (Endorsed by Asociación Española de Normalización in January of 2019.)

GOSTR

GOST R ISO 8559-1-2020 Size designation of clothes. Part 1. Anthropometric definitions for body measurement

AT-ON

ONORM A 8060-1980 Body dimensions of people; terms and definitions; Measuring procedures, measuring instruments, values
ONORM A 8041-1983 Planning aid for the ergonomic design; body shape siencils; side view for seats
OENORM EN ISO 8559-1:2021 Size designation of clothes - Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017)

IN-BIS

IS 11621-1986 Definition and measurement of body dimensions for garment construction and anthropometric measurement purposes
IS 13214-1991 Machine Tools - Ergonomic Anthropometric Terminology

ES-AENOR

UNE 25 222 Horseshoe Steel Measurement Selection Sheet

RU-GOST R

GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness
GOST 19920.18-1974 Stereoregular butadiene synthetic rubbers. Method for determination of cold flow
GOST R EN 547-3-2009 Safety of machinery. Human body measurement. Part 3. Anthropometric data
GOST R EN 547-2-2009 Safety of machinery. Human body measurement. Part 2. Principles for determining the opening dimensions required for access into machinery (machinery parts) by body parts
GOST 30404-2000 Solid mineral fuels. Determination of forms of sulfur
GOST 30404-1994 Solid fuel. Determination of forms of sulphur

American National Standards Institute （ANSI)

ANSI B93.95M-1987 Hydraulic Fluid Power - Positive Displacement Pumps, Motors, and Integral Transmissions - Determination of Steady-State Performance

American Society for Testing and Materials (ASTM)

ASTM D6192-98(2004) Standard Tables of Body Measurements for Girls, Sizes 7 to 16
ASTM D4910-99 Standard Tables of Body Measurements for Infants, Sizes 0 to 24
ASTM D4910-07 Standard Tables of Body Measurements for Infants, Sizes 0 to 24
ASTM D6829-02(2008) Standard Tables of Body Measurements for Juniors, Sizes 0 to 19
ASTM D8077/D8077M-16(2022) Standard Tables for Body Measurements for Mature Big Men Type, Size Range 46–64
ASTM D8077/D8077M-16 Standard Tables for Body Measurements for Mature Big Men Type, Size Range 46–64
ASTM D6192-07 Standard Tables of Body Measurements for Girls, Sizes 2 to 20 (Reg x0026; Slim) and Girls Plus
ASTM D4581-86(2001) Standard Guide for Measurement of Morphologic Characteristics of Surface Water Bodies
ASTM D4581-86(2005) Standard Guide for Measurement of Morphologic Characteristics of Surface Water Bodies
ASTM D4581-86(1996)e1 Standard Guide for Measurement of Morphologic Characteristics of Surface Water Bodies

HU-MSZT

MSZ KGST 304-1976 Taper size measurement
MSZ KGST 639-1977 Trapezoidal surface size measurement

Standard Association of Australia （SAA）

AS/NZS 4024.1704:2014 Machinery Safety Anthropometry Anthropometric Data
AS 4024.1704:2006 Safety of machinery - Human body measurements - Anthropometric data
AS/NZS 4024.1703:2014 Mechanical Safety Anthropometric Measurement Principles for Determining Required Dimensions of Access Doors

Lithuanian Standards Office

LST ISO 8559:1995 Garment construction and anthropometric surveys. Body dimensions
LST EN ISO 8559-1:2021 Size designation of clothes - Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017)
LST EN 547-3-2000+A1-2009 Safety of machinery - Human body measurements - Part 3: Anthropometric data

Society of Automotive Engineers (SAE)

SAE J2659-2012 Test Method to Measure Fluid Permeation of Polymeric Materials by Speciation
SAE J2659-2003 Test Method to Measure Fluid Permeation of Polymeric Materials by Speciation
SAE J984-1967 BODY FORMS FOR LABORATORY IMPACT TESTING

SAE - SAE International

SAE J2659-2018 Test Method to Measure Fluid Permeation of Polymeric Materials by Speciation
SAE J984-1992 BODYFORMS FOR USE IN MOTOR VEHICLE PASSANGER COMPARTMENT IMPACT DEVELOPMENT

CH-SNV

SN EN ISO 8559-1:2021 Size designation of clothes - Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017)

CEN - European Committee for Standardization

EN 4730:2018 Aerospace series - Anthropometric dimensioning of aircraft seats

PT-IPQ

NP EN 325-2002 Wood-based panels Determination of dimensions of test pieces

European Committee for Standardization (CEN)

EN 547-3:1996 Safety of machinery - Human body measurements - Part 3: Anthropometric data (Incorporates Amendment A1: 2008)
EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data

AENOR

UNE-EN 547-3:1997+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data

VN-TCVN

TCVN 5781-2009 Method of human body measuring

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 4730-2017 Aerospace series - Anthropometric dimensioning of aircraft seats (Edition P1)

CZ-CSN

CSN 40 4015-1974 Exposure yield measurement of gammaem tters

NL-NEN

NEN 1812-1990 Ergonomics - Ergonomie requirements for office chairs Requirements for dimensions and design - Measurement- and test methods

United States Navy

NAVY MIL-M-19261-1956 METER, POWER FACTOR 4-1/2 INCH, SWITCHBOARD TYPE

Others: