Adjustment and use of parallel light tubes

Adjustment and use of parallel light tubes, Total:205 items.

The international standard classification for "Adjustment and use of parallel light tubes" includes: Energy and heat transfer engineering in general , Anaesthetic, respiratory and reanimation equipment , Domestic electrical appliances in general , Lifts. Escalators .

The Chinese standard classification for "Adjustment and use of parallel light tubes" includes: Technical management , Surgery devices , Household air conditioning and cooling appliances , Elevator .

Shanghai Provincial Standard of the People's Republic of China

DB31/T 255-2020 Technical requirement for energy-efficient operation and management of centralair-conditioning systems

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 2146-2004 Procedures for the use of plant growth regulator GA3

Shandong Provincial Standard of the People's Republic of China

DB37/T 4575-2023 Regulations on the use and management of real estate management platforms for administrative institutions

Professional Standard - Medicine

YY/T 1439.2-2016 Pressure regulators for use with medical gases—Part 2:Manifold and line pressure regulators

Professional Standard - Light Industry

QB/T 4836-2015 Household and similar solar photovoltaic air-conditioner

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 24805-2009 Vertical lifting platforms for persons with impaired mobility
GB 24805-2009 Vertical lifting platforms for persons with impaired mobility

Bureau of Indian Standards

IS/ISO 10524-2-2005 Pressure Regulators for use with Medical Gases Part 2 Manifold and Line Pressure Regulators
IS 18361-2-2023 Pressure Regulators For Use With Medical Gases - Part 2 Manifold And Line Pressure Regulators

German Institute for Standardization

DIN 859:1926 Hand reamers with parallel shank - adjustable, slotted
DIN 859:1953 Hand reamers with parallel shank - adjustable, slotted
DIN 859:2007-12 Hand reamers with parallel shank - adjustable, slotted
DIN 69880-11:1994 Tool holders with parallel shank - Part 11: Support for angular adjustment
DIN 69880-11:1994-09 Tool holders with parallel shank - Part 11: Support for angular adjustment
DIN EN 14086:2003-04 Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method; German version EN 14086:2003
DIN EN 208:2010-04 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors); German version EN 208:2009
DIN EN ISO 10524-2:2019-08 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018); German version EN ISO 10524-2:2019
DIN EN ISO 10524-2:2019 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
DIN EN 208 E:2008-12 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
DIN EN 208:2002 Personal eye-protection — Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
DIN EN ISO 483:2006-02 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005); German version EN ISO 483:2005
DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
DIN 21634:1999 Air regulation systems in mining - Swinging roadway air doors for monorails and free steered machines - Building and operation
DIN EN 208:2010 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors); German version EN 208:2009

Korean Agency for Technology and Standards (KATS)

KS R ISO 8218:2004 Road vehicles-Levelling devices for headlamp dipped beam
KS R ISO 8218:2013 Road vehicles－Levelling devices for headlamp dipped beam
KS F 3120-2023 Powered sliding and swing doors for pedestrians
KS R 8029-2017 Chain adjusters and crank cotter pins for bicycles
KS B ISO 15368-2006(2016) Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
KS B ISO 15368-2021 Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
KS B ISO 15368:2006 Optics and optical instruments-Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
KS B 6213-2009(2019) Liquefied petroleum gas regulators for domestic use
KS B ISO 15368-2006(2021) Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
KS B 6354-2016(2021) LP－GAS pressure regulators used in cutting,heating and related processes
KS M 7012-1995 Conditioning of paper and paperboard for test

SCC

BS EN ISO 10524-2:2006 Pressure regulators for use with medical gases-Manifold and line pressure regulators
DANSK DS/EN 208:2010 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
AENOR UNE-EN 208:2010 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
NS-EN 208:1998 Personal eye protection — Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
NS-EN 738-2:1998 Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators
CAN/CSA-Z10524-2-2012(R2017) Pressure regulators for use with medical gases — Part 2: Manifold andline pressure regulators
CAN/CSA-Z10524-2-2012(C2017) Regulators for use with medical gases — Part 2: Pipe and rail regulators
DANSK DS/ISO 10524-2:2019 Pressure regulators for use with medical gases – Part 2: Manifold and line pressure regulators
AENOR UNE 20359-2:1993 Safety requirements for fans and electric regulators. Part 2: fans and regulators for use on boats.
AENOR UNE-EN ISO 10524-2:2007 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005)
NS-EN ISO 10524-2:2006 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005)
DANSK DS/EN ISO 10524-2:2019 Pressure regulators for use with medical gases – Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
NS-EN ISO 10524-2:2019 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
NS-EN 208:2009 Personal eye-protection — Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
CAN/CSA-Z10524-1-2012(C2017) Regulators for use with medical gases — Part 1: Regulators and flow meter regulators
08/30169126 DC BS EN 208. Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
DANSK DS/EN ISO 483:2006 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
DIN EN ISO 10524-2 E:2017 Draft Document - Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO/DIS 10524-2:2017); German and English version prEN ISO 10524-2:2017
BS 1523-2:1949 Glossary of terms used in controlling and regulating systems. Process control
BS EN 208:1994 Specification for personal eye-protectors used for adjustment work on lasers and laser systems
BS 1523-3:1954 Glossary of terms used in controlling and regulating systems. Kinetic control
BS 1523-5:1954 Glossary of terms used in controlling and regulating systems. Components of servo mechanisms
NS-EN ISO 483:2005 Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005)
BS EN 961:1996 Gas welding equipment. Manifold regulators used in welding, cutting and allied processes up to 200 bar
AENOR UNE-EN ISO 483:2006 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005)

British Standards Institution (BSI)

BS EN ISO 10524-2:2007 Pressure regulators for use with medical gases - Manifold and line pressure regulators
BS EN 738-2:1999 Pressure regulators for use with medical gases - Manifold and line pressure regulators
BS EN ISO 10524-2:2019 Pressure regulators for use with medical gases. Manifold and line pressure regulators
BS EN 208:2010 Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
BS EN 208:1999 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
BS EN 208:2009 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
BS EN 738-2:1999(2000) Pressure regulators for medical gases Part 2: Manifold and line pressure regulators
BS EN ISO 483:2006 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value
BS ISO 15368:2021 Optics and photonics. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
BS EN ISO 8254-2:2016 Paper and board. Measurement of specular gloss. 75 degree gloss with a parallel beam, DIN method
BS EN ISO 8254-2:2003 Paper and board - Measurement of specular gloss - 75 ° gloss with a parallel beam, DIN method
BS ISO 19962:2019 Optics and photonics. Spectroscopic measurement methods for integrated scattering by plane parallel optical elements
BS EN ISO 483:2005 Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value
20/30352222 DC BS ISO 15368. Optics and photonics. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
BS EN ISO 10524-1:2019+A1:2023 Pressure regulators for use with medical gases. Pressure regulators and pressure regulators with flow-metering devices
BS EN ISO 10524-1:2019 Pressure regulators for use with medical gases. Pressure regulators and pressure regulators with flow-metering devices
BS EN 14086:2003 Paper and board - Measurement of specular gloss - 45 ° gloss with a parallel beam, DIN method
BS ISO 15368:2001 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
BS EN 738-1:1997 Pressure regulators for use with medical gases - Pressure regulators and pressure regulators with flow metering devices
BS EN ISO 10524-1:2006 Pressure regulators for use with medical gases - Pressure regulators and pressure regulators with flow-metering devices

Spanish Association for Standardization (UNE)

UNE-EN 14086:2003 Paper and board - Measurement of specular gloss - 45o gloss with a parallel beam, DIN method
UNE-EN 738-2:1999 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS
UNE-EN ISO 10524-2:2019 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
UNE-EN ISO 10524-2:2007 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005)
UNE-EN 125400:1991 SS: ADJUSTERS USED WITH MAGNETIC OXIDE CORES FOR USE IN INDUCTORS AND TUNED TRANSFORMERS. (Endorsed by AENOR in November of 1996.)
UNE-EN ISO 483:2000 PLASTICS - SMALL ENCLOSURES FOR CONDITIONING AND TESTING USING AQUEOUS SOLUTIONS TO MAINTAIN RELATIVE HUMIDITY AT CONSTANT VALUE (ISO 483:1988)
UNE-EN 125401:1991 BDS: ADJUSTERS USED WITH MAGNETIC OXIDE (FERRITE) CORES FOR USE IN INDUCTORS AND TUNED TRANSFORMERS. (Endorsed by AENOR in November of 1996.)

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1668 Set(CD):2005 The use of Ventilation and Air-conditioning in buildings Set on CD
AS/NZS 1668 Set:2005 The use of Ventilation and Air-conditioning in buildings Set

VN-TCVN

TCVN 7741-2-2007 Pressure regulators for use with medical gases.Part 2: Manifold and line pressure regulators
TCVN 7741-1-2007 Pressure regulators for use with medical gases.Part 1: Pressure regulators and pressure regulators with flow-metering devices

US-CFR-file

CFR 49-1109.1-2013 Transportation. Part1109:Use of mediation in board proceedings. Section1109.1:Mediation statement of purpose, organization, and jurisdiction.
CFR 7-274.8-2014 Agriculture. Part274:Issuance and use of program benefits. Section274.8:Functional and technical EBT.
CFR 12-217.22-2013 Banks and banking. Part217:Capital adequacy of board-regulated institutions. Section217.22:Regulatory capital adjustments and deductions.
CFR 17-11.2-2013 Commodity and Securities Exchanges. Part11:Rules relating to investigations. Section11.2:Authority to conduct investigations.

Association Francaise de Normalisation

NF EN 14086:2003 Papiers et cartons - Mesurage du brillant spéculaire - Brillant à 45o avec un faisceau parallèle, méthode DIN
NF EN ISO 10524-2:2019 Regulators for use with medical gases - Part 2: rail and pipeline regulators
NF Q03-101-2*NF EN ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2 : 75 degree gloss with a parallel beam, DIN method
NF S10-049:2003 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements.
NF S77-112*NF EN 208:2010 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors).
NF S77-112:1998 Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors).
NF EN ISO 10524-1:2019 Détendeurs pour l'utilisation avec les gaz médicaux - Partie 1 : détendeurs et détendeurs-débitmètres
NF S10-049*NF ISO 15368:2021 Optics and photonics - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
NF ISO 15368:2021 Optics and photonics - Measurement of the reflection factor of flat surfaces and the transmittance of parallel plane elements
NF EN 1074-5:2001 Water supply fittings - Requirements for suitability for use and related checks - Part 5: regulating valves
NF C27-233:1990 Maintenance and use guide for triaryl phosphate ester turbine control fluids.
NF ISO 19962:2019 Optics and photonics - Spectroscopic measurement methods for integrated scattering by optical elements with parallel planes
NF S10-048*NF ISO 19962:2019 Optics and photonics - Spectroscopic measurement methods for integrated scattering by plane parallel optical elements
NF C52-340*NF EN 125400:1991 Sectional specification : adjusters used with magnetic oxide cores for use in inductors and tuned transformers
NF EN ISO 10524-1/A1:2023 Détendeurs pour l'utilisation avec les gaz médicaux - Partie 1 : détendeurs et détendeurs-débitmètres - Amendement 1
NF E29-190-1:2020 Gas pressure regulators for distribution netwoks and service lines - Part 1 : type C Regulators
NF F00-010/AM1:1975 Railway equipment in general. Tolerances and adjustments used in hinges in particular. Use of clearance adjustment or uncertainty adjustment.
NF G00-003/A1*NF EN ISO 139/A1:2011 Textiles - Standard atmospheres for conditioning and testing - Amendment 1

NL-NEN

NEN-EN 208-1994 Personal eye-protection.Eye-protectors for adjustment work on lasers and laser systems(laser adjustment eye-protectors)

BE-NBN

NBN-EN 208-1994 Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustement eye-protectors)
NBN 612-1965 car. Optical devices for adjusting the direction of street lights and dipped beams

GSO

OS GSO ISO 10524-2:2015 Pressure regulators for use with medical gases -- Part 2: Manifold and line pressure regulators
BH GSO ISO 10524-2:2017 Pressure regulators for use with medical gases -- Part 2: Manifold and line pressure regulators
GSO 1853:2008 Plastics small enclosures for conditioning and testing using aqueous solution to maintain the humidity at constant value
BH GSO ISO 483:2016 Plastics -- Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
GSO ISO 15368:2015 Optics and optical instruments -- Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
OS GSO ISO 15368:2015 Optics and optical instruments -- Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
OS GSO 1853:2008 Plastics small enclosures for conditioning and testing using aqueous solution to maintain the humidity at constant value
GSO ISO 2777:2008 Modular co-ordination - Co-ordinating sizes for rigid flat sheet boards used in building
GSO ISO 19962:2021 Optics and photonics — Spectroscopic measurement methods for integrated scattering by plane parallel optical elements
BH GSO ISO 19962:2022 Optics and photonics — Spectroscopic measurement methods for integrated scattering by plane parallel optical elements
GSO ISO 12858-1:2007 Optics and optical instruments- Ancillary devices for geodetic instruments – Part 1: Invar levelling staffs

Japanese Industrial Standards Committee (JISC)

JIS C 7014:1962 Type designation system for photo-tubes and photo-multipliers
JIS F 7113:1975 Marine ventilation dampers
JIS P 8111:1994 Conditioning of paper and paperboard for test
JIS C 8961:1993 Measuring procedure of power conditioner efficiency for photovoltaic systems
JIS C 8961:2008 Measuring procedure of power conditioner efficiency for photovoltaic systems

Danish Standards Foundation

DS/EN ISO 10524-2:2006 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
DS/EN ISO 8254-2:2003 Paper and board - Measurement of specular gloss - Part 2: 75 gloss with a parallel beam, DIN method
DS/EN 208:1993 Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)

SE-SIS

SIS SS 3225-1984 Threaded stainless steel pipe fittings - Unions with internal parallel pipe threads
SIS SS 2636-1987 Handscrewing taps - Parallel pipe threads G and Rp

Canadian Standards Association (CSA)

CSA Z10524-2-2019 Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators
CAN/CSA-Z10524-2-2012 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (First Edition)

PT-IPQ

NP HD 516-2000 Guide to use of low voltage harmonized cables

European Committee for Standardization (CEN)

EN 208:1993 Personal Eye-Protection - Eye-Protectors for Adjustment Work on Lasers and Laser Systems (Laser Adjustment Eye- Protectors)
EN 208:2009 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
EN ISO 483:1999 Plastics - Small Enclosures for Conditioning and Testing Using Aqueous Solutions to Maintain Relative Humidity at Constant Value ISO 483:1988
EN 738-2:1998 Pressure Regulators for Use with Medical Gases Part 2: Manifold and Line Pressure Regulators [Superseded By: CEN EN ISO 10524-2]
EN ISO 483:2005 Plastics - Small Enclosures for Conditioning and Testing Using Aqueous Solutions to Maintain the Humidity at a Constant Value
EN 208:1998/A1:2002 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) Ratified European Text
EN 208:1998/prA1:2000 Amd PRA1 Personal Eye-Protection - Eye-Protectors for Adjustment Work on Lasers and Laser Systems (Laser Adjustment Eye-Protectors)
prEN 208-1992 Personal eye-protection; eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
EN 14086:2003 Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method

CEN - European Committee for Standardization

EN 208:1998 Personal eye-protection Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) (Incorporates Amendment A1: 2002)

Lithuanian Standards Office

LST EN ISO 10524-2:2006 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005)
LST EN ISO 8254-2:2003 Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method (ISO 8254-2:2003)
LST EN 125400-2002 Sectional specification: Adjusters used with magnetic oxide cores for use in inductors and tuned transformers

International Telecommunication Union (ITU)

ITU-R REPORT BS.463-5-1990 TRANSMISSION OF SEVERAL SOUND PROGRAMMES OR OTHER SIGNALS WITH A SINGLE TRANSMITTER IN FREQUENCY-MODULATION SOUND BROADCASING
ITU-T V.19 SPANISH-1988 MODEMS FOR PARALLEL DATA TRANSMISSION USING TELEPHONE SIGNALLING FREQUENCIES
ITU-T V.19 FRENCH-1988 MODEMS FOR PARALLEL DATA TRANSMISSION USING TELEPHONE SIGNALLING FREQUENCIES

IX-SA

AS 1141.41:1984 AS 1141.41 Laboratory polishing of aggregates using horizontal bed machines

Standard Association of Australia （SAA）

AS 1141.41:2017/Amdt 1:2018 AS 1141.41 Laboratory polishing of aggregates using horizontal bed machines
AS 2402.2.2:2005 Traction batteries - Lead-acid - Valve-regulated cells - Installation and usage
AS 2397:2015 Safe use of lasers in the building and construction industry
AS 3840.1:1998 Pressure regulators for use with medical gases - Pressure regulators and pressure regulators with flow-metering devices

International Organization for Standardization (ISO)

ISO 483:2005 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
ISO/PAS 50010:2023 Energy management and energy savings — Guidance for net zero energy in operations using an ISO 50001 energy management system
ISO 19962:2019 Optics and photonics — Spectroscopic measurement methods for integrated scattering by plane parallel optical elements
ISO 15368:2021 Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
ISO 15368:2001 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
ISO 10524-1:2006 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices
ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method
ISO 8254-2:2003 Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method
ISO 10524:1995 Pressure regulators and pressure regulators with flow-metering devices for medical gas systems
ISO 10524-1:2018 Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices

Society of Automotive Engineers (SAE)

SAE AS4305-2007 Tee Assembly, Flared Tube, Adjustable End on Run, for Seal Ring
SAE AS4305-1993 Tee Assembly@ Flared Tube@ Adjustable End on Run@ for Seal Ring
SAE ARP8616-2021 Balancing Machine Technology - Proper Use and Performance of Response Checks

Underwriters Laboratories (UL)

UL SUBJECT 8750-2007 OUTLINE OF INVESTIGATION FOR LIGHT EMITTING DIODE (LED) LIGHT SOURCES FOR USE IN LIGHTING PRODUCTS (Issue Number: 1)
UL SUBJECT 8750-2008 OUTLINE OF INVESTIGATION FOR LIGHT EMITTING DIODE (LED) LIGHT SOURCES FOR USE IN LIGHTING PRODUCTS (Issue Number: 2)
UL 935 CRD-2012 UL Standard for Safety Fluorescent-Lamp Ballasts - Section/Paragraph Reference: Supplement SC (new) Subject: Ballasts intended to be dimmed using solid-state dimming controls electrically wired in series with the mains supply (Edition 10: May 21, 2001)
UL SUBJECT 2703-2010 OUTLINE OF INVESTIGATION FOR RACK MOUNTING SYSTEMS AND CLAMPING DEVICES FOR FLAT-PLATE PHOTOVOLTAIC MODULES AND PANELS (Issue Number: 1)

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI)

ARI 620-2004 Self-Contained Humidifiers for Residential Applications

American National Standards Institute （ANSI)

ANSI/ASHRAE 111-2008 Measurement, Testing, Adjusting and Balancing of Building HVAC Systems
ANSI/ASHRAE 151-2010 Practices for Measuring, Testing, Adjusting, and Balancing Shipboard HVAC&R Systems
ANSI/ATIS 0600330-2013 Valve Regulated Lead-Acid Batteries Used in the Telecommunications Environment
ANSI E1.69-2022 Reporting the Dimming Performance of Entertainment Luminaires Using LED Sources

Institute of Electrical and Electronics Engineers (IEEE)

IEEE C57.154-2012 The Design@ Testing@ and Application of Liquid-Immersed Distribution@ Power@ and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures

American Society of Mechanical Engineers (ASME)

ASME 2428-2001 Attachment of Firetubes to Flat Tubesheets Using Complete Penetration Welds Section I SUPP 8&9

American Society for Testing and Materials (ASTM)

ASTM D7539-10(2020) Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
ASTM D7539-10(2015) Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
ASTM D753-73(1978) Standard Practice for Humidity Conditioning of Pavement Marking Coating Test Panels Using Test Chambers
ASTM E3006-20 Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
ASTM E3006-15 Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
ASTM E944-96 Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, (IIA)

RO-ASRO

STAS 7448/1-1980 GAS REGULATORS USED IN WELDING, CUTTING AND RELATED PROCESSES Terminology

IN-BIS

IS 13802-1993 Planning and execution of seabed engineering (geophysical) survey for offshore platforms and pipelines - guidelines
IS 4784-1968 Specification for low pressure regulators for use with butane gas
IS 6172-1979 Specification for hand taps for pipe threads parallel

Compressed Gas Association (U.S.)

CGA SB-13-2014 Use of regulators on compressed gas cylinders over 3000 PSI

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI)

AHRI 261 SI-2012 Sound Rating of Ducted Air Moving and Conditioning Equipment
AHRI 260 I-P-2012 Sound Rating of Ducted Air Moving and Conditioning Equipment

Association of German Mechanical Engineers

VDI/VDE/DGQ 2618 Blatt 6.1-2009 Inspection of measuring and test equipment - Test instruction for optical flats and optical parallels

RU-GOST R

GOST R 55832-2013 Resources saving. Best available techniques. Environmentally sound management of previously used oil

AT-ON

ONORM K 3010-1979 Gas cylinders, pressure regulators (governors) and hoses tor medico-technical equipment

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4497-2002 Potential Energy Savings for Conditioning Fresh Air with a Membrane-Based Energy Recovery Ventilator

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications

CEPT T/CD 01-07-1983 Technical Specifications of a Modem for Parallel Transmission of Data Using the Signaling Frequencies of Telephone Stations for Use on the General Telephone Network With Switching

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4678-2004 Convective Evaporation on Plain Tube and Low-Fin Tube Banks Using R-123 and R-134a

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R BT.1728-1 FRENCH-2010 Guidance on the use of flat panel displays in television production and postproduction

Others: