Raman test condition parameter settings

Raman test condition parameter settings, Total:106 items.

The international standard classification for "Raman test condition parameter settings" includes: Exploratory and extraction equipment , Hydraulic construction , Control equipment for electric power systems , Agricultural tractors and trailed vehicles , Electrical equipment of ships and of marine structures .

The Chinese standard classification for "Raman test condition parameter settings" includes: Petroleum drilling & production equipment and instrument , Relay protection and automatic device , Technical management , Tractor , Tractors in general , Cab and others , Environmental Condition and General Test Method .

Professional Standard - Petroleum

SY 6739-2014 General Technical Specifications for Petroleum Drilling Parameter Monitor
SY 5377-2013 Technical conditions of drilling fluid parameter testing equipment
SY/T 6971-2013 Multi-parameter Drilling Instrumentation Testing Equipment
SY/T 6739-2008 Technical specifications of drilling parameter monitor
SY/T 6739-2014 Petroleum drilling parameter monitoring instrument general specification
SY/T 5377-2013 Specification for Drilling Fluid Testing Instruments
SY 6971-2013 Drilling multi-parameter test device

未注明发布机构

IEEE Std 1515-2000(R2008) IEEE Recommended Practice for Electronic Power Subsystems: Parameter Definitions, Test Conditions, and Test Methods
DIN EN 61290-10-5 E:2013-04 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure

国家能源局

SY/T 6739-2021 Specifications of monitoring instrument for drilling parameter
NB/T 10170-2019 Technical Specifications operational parameter tester for mine main fans
NB/T 10171-2019 Technical specifications of operational parameter tester for mine pumps
NB/T 10172-2019 Technical specifications of operational parameter tester for mine air compressors

Professional Standard - Water Conservancy

SL 550-2012 Basic parameters and technical conditions for fertilizer apparatus used in irrigation

Professional Standard - Electricity

DL/T 1567-2016 General technical requirements for switching reactive power compensation equipment test device
DL/T 266-2023 Guide for measurement of impulse grounding grid parameters
DL/T 266-2012 Guide for measurement of impulse grounding grid parameters
DL/T 1119-2010 General technical conditions of measuring instruments for power frequency parameters of transmission lines
DL/T 2621-2023 General specification for DC transmission line parameters tester
DL/T 1501-2016 Technical Specifications of Digital Test Equipment for Relay Protection
DL/T 1075-2007 General specifications for numerical integrated protection and control equipment
DL/T 2554-2022 Test guide for short-circuit transient characteristic parameter of grounding device

Professional Standard - Electron

SJ/T 10438-1993 General specification for bipolar transister DC parameter testers
SJ/T 11460.6.3-2022 Display light source assembly Part 6-3: Test method LED light strip photoelectric parameters
SJ/T 10195-1991 General specification for MSI and SSI digital IC static parameter test instrument

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 6444-2008 Test method for parameters of submarine-to-ground missile launching system

Military Standard of the People's Republic of China-General Armament Department

GJB 2398-1995 Test method for technical parameters of instantaneous frequency measurement and direction finding equipment
GJB 8659-2015 Test method for parameters of submarine-to-ground missile launching system

Professional Standard - Coal

MT/T 642-1996 Technical Specifications for the Tester of Comprehensive Pipeline Gas Drainage Parameters

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19498-2004 The static testing method and accepting technical condition of the protective structures on agricultural and forestry tractors
GB 7121-1986 Agricultural and forestry wheeled tractors--Protective structures--Test method in the strength and acceptance conditions
GB/T 13952-1992 classification of environmental conditions of electric and electronic products for mobile platforms and offshore installations
GB/T 3871.2-2006 Agricultural tractors - Test procedures - Part 2: Measurements of tractor parameters

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 19498-2017 Protective structures on agricultural and forestry tractors--Static testing method and accepting condition

Group Standards of the People's Republic of China

T/MBJX 0006-2021 Test method for electrical parameters of DC high voltage generator

National Metrological Technical Specifications of the People's Republic of China

JJF 1895-2021 Calibration Specification for Semiconductor Devices DC and Low Frequency Parameters Test Equipments

Professional Standard - Machinery

JB/T 12019-2014 General Specification for Multi-parameter Field Fast Food Quality Analyzer

British Standards Institution (BSI)

BS ISO 19744:2020 Test conditions for numerically controlled broaching machines. Testing of accuracy. Vertical surface type broaching machines
BS EN 61290-10-5:2014 Optical amplifiers. Test methods. Multichannel parameters. Distributed Raman amplifier gain and noise figure
19/30365474 DC BS ISO 19744-1. Test conditions for numerically controlled broaching machines. Testing of the accuracy - Part 1. Vertical surface type broaching machines
BS ISO 6779:2023 Test conditions for vertical internal type broaching machines. Testing of accuracy
BS ISO 6480:2019 Test conditions for horizontal internal type broaching machines. Testing of accuracy
BS ISO 6779:2019 Test conditions for vertical internal type broaching machines. Testing of accuracy
BS DD ISO/PAS 21100:2011 Air cargo unit load devices. Performance requirements and test parameters
BS ISO 21100:2014 Air cargo unit load devices. Performance requirements and test parameters
22/30449725 DC BS ISO 6779 Test conditions for vertical internal type broaching machines. Testing of accuracy
BS ISO 6481:2019 Test conditions for vertical surface type broaching machines. Testing of accuracy
BS ISO 22705-2:2023 Springs. Measurement and test parameters - Cold formed cylindrical helical extension springs
BS EN ISO 389-9:2009 Acoustics - Reference zero for the calibration of audiometric equipment - Preferred test conditions for the determination of reference hearing threshold levels
BS EN ISO 389-9:2010 Acoustics. Reference zero for the calibration of audiometric equipment. Preferred test conditions for the determination of reference hearing threshold levels
BS EN 60444-8:2017 Measurement of quartz crystal unit parameters. Test fixture for surface mounted quartz crystal units
BS EN 60444-8:2003 Measurement of quartz crystal unit parameters - Test fixture for surface mounted quartz crystal units
BS PD CEN/TR 1295-4:2015 Structural design of buried pipelines under various conditions of loading. Parameters for reliability of the design
BS EN ISO 527-3:2018 Plastics. Determination of tensile properties. Test conditions for films and sheets

SCC

CEI EN 61290-10-5:2015 Optical amplifiers - Test methods Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure
DANSK DS/EN 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure
DIN EN 61290-10-5 E:2013 Draft Document - Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure (IEC 86C/1108/CD:2013)
MIL MIL-STD-2121A-1992 DETERMINATION OF ELECTRONIC TEST EQUIPMENT PARAMETERS (NO S/S DOCUMENT) (SUPERSEDING DOD-STD-2121)
VDI/VDE 2635 BLATT 1-2015 Experimental structural analysis — strain gauges with metallic measuring grid — characteristics and test conditions
VDI/VDE/GESA 2635 BLATT 1:2007 Experimental structural analysis — strain gauges with metallic measuring grid — characteristics and test conditions

GSO

GSO IEC 61290-10-5:2021 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure

Association Francaise de Normalisation

NF C93-805-10-5*NF EN 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5 : multichannel parameters - Distributed Raman amplifier gain and noise figure
NF EN 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: multiple channel parameters - Gain and noise figure of distributed Raman amplifiers
NF E60-139*NF ISO 19744:2022 Test conditions for numerically controlled broaching machines - Testing of the accuracy - Vertical surface type broaching machines
NF ISO 19744:2022 Test conditions for numerically controlled broaching machines - Checking accuracy - Vertical exterior broaching machines

ES-UNE

UNE-EN 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure (Endorsed by AENOR in October of 2014.)

PL-PKN

PN T06500 ArkusZ4-1971 Electronic measuring e?uipments Specifying and tests methods for parametefrs and) errors
PN T06500-04-1985 Electronic measuring equipments Specifying parameters Tests

Japanese Industrial Standards Committee (JISC)

JIS C 6122-10-5:2022 Optical amplifiers -- Test methods -- Part 10-5: Multichannel parameters -- Distributed Raman amplifier gain and noise figure
JIS C 6122-10-5:2016 Optical amplifiers -- Test methods -- Part 10-5: Multichannel parameters -- Distributed Raman amplifier gain and noise figure

European Committee for Electrotechnical Standardization（CENELEC）

EN 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure

SAE - SAE International

SAE AS6171/8-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Raman Spectroscopy Test Methods

Society of Automotive Engineers (SAE)

SAE AS6171/8-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Raman Spectroscopy Test Methods

International Electrotechnical Commission (IEC)

IEC 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure
IEC Guide 106:1996 Guide for specifying environmental conditions for equipment performance rating

German Institute for Standardization

DIN EN 61290-10-5:2015-03 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure (IEC 61290-10-5:2014); German version EN 61290-10-5:2014
DIN EN 61290-10-5:2015 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure (IEC 61290-10-5:2014); German version EN 61290-10-5:2014
DIN 41566-2:1977 Reversible tripping devices, 60 V, for telecommunication equipment; technical datas and test conditions

International Organization for Standardization (ISO)

ISO 6480:2019 Test conditions for horizontal internal type broaching machines — Testing of accuracy
ISO 19744:2020 Test conditions for numerically controlled broaching machines — Testing of accuracy — Vertical surface type broaching machines
ISO 15193:2002 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures
ISO 3463:1981 Title missing - Legacy paper document

SE-SIS

SIS 11 21 19 E-1963 Dragprovstavar typ J

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD320-A-1992 Conditions for Measurement of Diode Static Parameters [Superseded: JEDEC EIA-302, JEDEC 302]
JEDEC JEP163-2015 Selection of Burn-In/Life Test Conditions and Critical Parameters for QML Microcircuits

Korean Agency for Technology and Standards (KATS)

KS P ISO 15193:2014 In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for content and presentation of reference measurement procedures
KS P ISO 15193:2010 In vitro diagnostic medical devices-Measurement of quantities in samples of biological origin-Requirements for content and presentation of reference measurement procedures
KS A IEC 60605-3-1:2002 Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 1515-2000 IEEE Recommended Practice for Electronic Power Subsystems: Parameter Definitions, Test Conditions, and Test Methods

American National Standards Institute （ANSI)

ANSI/EIA 320-A:1992 Thermal Equilibrium Conditions for Measurement of Diode Static Parameters

RU-GOST R

GOST 26678-1985 Electric domestic compression refrigrators and freezers of parameter series. General specification
GOST R 54784-2011 Testing agricultural tractors and machines. Methods for estimation of technical parameters
GOST R 53490-2009 Agricultural tractors. The noise at the operator's position. Methods and conditions of measurements
GOST 20915-2011 Testing agricultural tractors and machines. Procedure for determines test conditions
GOST 23421-1979 Device for palletized haulage of silica bricks by trucks. Main parameters and dimensions. Technical requirements

AENOR

UNE 15327:1993 ACCEPTANCE CONDITIONS FOR BROACHING MACHINES OF VERTICAL INTERNAL TYPE. TESTING OF THE ACCURACY.
UNE 15325:1993 CONDITIONS OF ACCEPTANCE FOR HORIZONTAL INTERNAL BROACHING MACHINES. TESTING OF THE ACCURACY.
UNE 15326:1993 ACCEPTANCE CONDITIONS FOR VERTICAL SURFACE TYPE BROACHING MACHINES. TESTING OF ACCURACY.

CZ-CSN

CSN 01 1616-1989 Noise. Reference sound source. Technical conditions and testing methods

American Society for Testing and Materials (ASTM)

ASTM E1143-05(2010) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1143-05 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1143-05(2015) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1143-99 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 3-1982 RECOMMENDED PRACTICE IN THE SELECTION OF REFERENCE AMBIENT CONDITIONS FOR TEST MEASUREMENTS OF ELECTRICAL APPARATUS

GOST

GOST ISO 15886-3-2017 Agricultural irrigation equipment. Sprinklers. Part 3. Characterization of distribution and test methods

AT-ON

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions

Others: