Roundness measurement

Roundness measurement, Total:80 items.

The international standard classification for "Roundness measurement" includes: Measuring instruments , Linear and angular measurements , Aircraft and space vehicles in general .

The Chinese standard classification for "Roundness measurement" includes: Measuring tool and instrument , Basic standards and general methods , Length Measurement , Basic standards and general methods .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7234-1987 Measurement of roundness--Terms, definitions and parameters of roundness
GB/T 26098-2010 Roundness measuring instrument
GB/T 7235-1987 Methods for the assessment of departure from roundness--Measurement of variations in radius
GB/T 32324-2015 Rolling Bearings - Methods for the Measurement and Assessment of Departure from Roundness and Waviness

National Metrological Verification Regulations of the People's Republic of China

JJG 429-2000 Rounaness Measuring Instrument

Professional Standard - Machinery

JB/T 5996-1992 Roundness Measurement Assessment of Accuracy of Three-point Measuring Method and the Measurement Instrument Used
JB/T 12199-2015 High speed roundness measuring instrument for rolling bearings
JB/T 10864-2008 Cylindricity measuring instrument

Military Standard of the People's Republic of China-General Armament Department

GJB/J 3410-1998(XG1-2015) Modification of the calibration procedures for high-accuracy roundness and cylindricity measurement standard devices 1-2015
GJB/J 3410-1998 Calibration procedures for high-accuracy roundness and cylindricity measurement standard devices
GJB 8791-2018 Mass spectrometric method for measuring abundances of lithium isotope

National Metrological Technical Specifications of the People's Republic of China

JJF 1508-2015 Primary Method of Isotopic Abundance Measurement

Professional Standard - Aerospace

QJ 3194-2004 The measurement method for roundness of large dimension
QJ 3009-1998 Measuring Method of Concentricity Between Missile and Launch Vehicle

Group Standards of the People's Republic of China

T/ZZB 2190-2021 Arc teeth synchronous belt

Korean Agency for Technology and Standards (KATS)

KS B 5545-2002(2007) Roundness measuring machines
KS B 5545-1993 Roundness measuring machines
KS B 5545-2009 Roundness measuring machines
KS B ISO 4291:2004 Methods for the assessment of departure from roundness-Measurement of variations in radius
KS B ISO 4291:2014 Methods for the assessement of depature from roundness — Measurement of variations in radius

German Institute for Standardization

DIN 58141-9:2013-07 Measurement of fiber optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres; Text in German and English
DIN 58141-9 E:2012-08 Measurement of fiber optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres
DIN 58141-9:2013 Measurement of fiber optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres; Text in German and English
DIN 58141-9:1995 Testing of fibre optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres
DIN 18721:1977 Circle graduation with visual reading for surveying instruments

American Society of Mechanical Engineers (ASME)

ASME B89.3.1-1972(R1997) Measurement of Out-of-Roundness
ASME B89.3.1-1972(R2003) Measurement of Out - Of - Roundness
ASME B89.3.1-1972 Measurement of Out-Of-Roundness

SCC

DIN 58141-9 E:2012 Draft Document - Measurement of fiber optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres; Text in German and English
NS-ISO 6318:1985 Measurement of roundness — Terms, definitions and parameters of roundness
BS 3730-1:1982 Assessment of departures from roundness-Glossary of terms relating to roundness measurement
DANSK DS/IEC 61196-1-301:2006 Coaxial communication cables - Part 1-301: Mechanical test methods - Test for ovality
VDI/VDE 2613-2003 Pitch and concentricity testing of gears — cylindrical gears, worm gears, bevel gears

SE-SIS

SIS SS-ISO 6318:1991 Mesurements of roundness — Terms, definitions and parameters of roundness
SIS SS-ISO 4291:1991 Methods for the assessment of departure from roundness — Measurement of varia- tions in radius
SIS SS-ISO 4292:1991 Methods for the assessment of departure from roundness — Measurement by two- and three-point methods

Danish Standards Foundation

DS/ISO 6318:1990 Measurement of roundness. Terms, definitions and parameters of roundness

International Organization for Standardization (ISO)

ISO 6318:1985 Measurement of roundness; Terms, definitions and parameters of roundness
ISO 4291:1985 Methods for the assessement of departure from roundness; Measurement of variations in radius

CZ-CSN

CSN 20 0300 Cast.16-1984 Measurements of geometrical accuracy of machine tools. Measuring methods. Di-mensional stability of cylindrical test workpieces of the samé series
CSN ISO 6318:1994 Measurement of roundness.Terms,definitions and parameters of roundness
CSN 01 4423-1987 Methods of measurement of roundness deviations
CSN 20 0300 Cast.19-1985 Maesurements of geometrical accuracyof machine tools.Measuring methods. Equality of axes'
CSN 72 1181-1967 Determination of grains with different unit wight in aggregates
CSN 35 8570-1966 Methods of measurement of spot conceritricity of television picture tubes

British Standards Institution (BSI)

BS 3730-1:1987 Assessment of departures from roundness. Glossary of roundness measurement terms
BS 3730-3:1982 Assessment of departures from roundness - Methods for determining departures from roundness using two- and three-point measurement
23/30420679 DC BS ISO 59020. Circular economy. Measuring and assessing circularity

AT-ON

ONORM ISO 6318:1986 Measurement of roundness; terms, definitions and parameters of roundness
ONORM L 1021-2001 Measurement of round timber
ONORM ISO 4291:1988 Methods for the assessment of departure from roundness; measurement of variations in radius

Spanish Association for Standardization (UNE)

UNE 82307:1994 MEASUREMENT OF ROUNDNESS AND CURVE PROFILES. BLOCK DIAGRAM OF A MEASURING SYSTEM. TERMS, DEFINITIONS AND PARAMETERS OF ROUNDNESS.
UNE 25 223 Measurement selection list for steel with same wing angle
UNE 26 223 Measurement selection list for steel with same wing angle

GM Europe

GME GMI L-1B-2-2008 Stiffness Measurement Dome (English/German)

HU-MSZT

MSZ KGST 2417-1980 Relative density measurement of the same size
MSZ 6008-1958 Template temperature measurement equipment. round template

RU-GOST R

GOST 21323-1975 Abrasive tool hardnees measurement by cone indentation
GOST 23061-2012 Soils. Methods for radioisotope measurement of density and humidity
GOST R 54365-2011 Round timber. Top diameter and taper method of volume measurement

GSO

OS GSO IEC 61196-1-301:2014 Coaxial communication cables - Part 1-301: Mechanical test methods - Test for ovality
BH GSO IEC 61196-1-301:2016 Coaxial communication cables - Part 1-301: Mechanical test methods - Test for ovality

Japanese Industrial Standards Committee (JISC)

JIS B 7451:1997 Instruments for the assessment of departure from roundness -- Measurement of variations in radius

Association Francaise de Normalisation

NF E10-103:1988 Dimensional measuring. Part 4 : circularity deviation.
NF E10-104:1989 Dimensional measuring methods. Part 5 : cylindrical deviation.

Defense Logistics Agency

DLA A-A-52300 VALID NOTICE 1-2001 PROTRACTORS, CIRCULAR AND SEMICIRCULAR, (MILS, DEGREES)
DLA A-A-52300-1992 PROTRACTORS, CIRCULAR AND SEMICIRCULAR, (MILS, DEGREES)
DLA A-A-52300 VALID NOTICE 2-2007 PROTRACTORS, CIRCULAR AND SEMICIRCULAR, (MILS, DEGREES)

American Society for Testing and Materials (ASTM)

ASTM E2975-16 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
ASTM RR-E37-1047 2015 E2975-Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
ASTM E2975-16e1 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
ASTM E2975-14 Standard Test Method for Calibration of Concentric Cylinder Rotational Viscometers

European Committee for Standardization (CEN)

EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple

GM North America

GM GM9074P-1989 Hardness Testing - Correction for Rounds

BE-NBN

NBN 757-1968 Measurement of thickness of extended line gear cylindrical gear system. Measurement of constants

AGMA - American Gear Manufacturers Association

2015-2-A06-2006 Accuracy Classification System - Radial Measurements for Cylindrical Gears
2015-1-A01-2001 Accuracy Classification System - Tangential Measurements for Cylindrical Gears

International Telecommunication Union (ITU)

ITU-T R.4 SPANISH-1988 METHODS FOR THE SEPARATE MEASUREMENTS OF THE DEGREES OF VARIOUS TYPES OF TELEGRAPH DISTORTION
ITU-T R.4-1989 Methods for the Separate Measurements of the Degrees of Various Types of Telegraph Distortion - Telegraph Transmission (Study Group IX) 1 pp
ITU-T R.4 FRENCH-1988 METHODS FOR THE SEPARATE MEASUREMENTS OF THE DEGREES OF VARIOUS TYPES OF TELEGRAPH DISTORTION