Beam quality factor beta

Beam quality factor beta, Total:73 items.

The international standard classification for "Beam quality factor beta" includes: Optoelectronics. Laser equipment , Welded joints .

The Chinese standard classification for "Beam quality factor beta" includes: Laser device , Welding and cutting , Technical Management , Optical Measurement .

Military Standard of the People's Republic of China-General Armament Department

GJB 7367-2011 Methodology of measurement for high-energy laser beam quality factor β

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 24664-2009 Evaluation and measurement method for beam quality of high power laser system for industry manufacturing
GB/T 32607-2016 Textiles—Guide to control on quality safety factors
GB/T 27666-2011 Evaluation and test method for beam quality of manufacturing laser system
GB/T 32831-2016 Quality Evaluation and Testing Method of High Energy Laser Beam
GB/T 22085.1-2008 Electron and laser beam welded joints - Guidance on quality levels for imperfactions - Part 1 : Steel

Professional Standard - Electron

SJ/T 10467-1993 Guidelines of quality engineering control for electronic beam tubes

National Metrological Technical Specifications of the People's Republic of China

JJF 1026-1991 Absorbed Dase Determination in Photon and Electron Beams

Group Standards of the People's Republic of China

T/UWGD B001-2021 Guidelines for assessment and control on underwear quality and safety factors
T/WSJD 20-2021 Specifications for quality control and testing of proton/carbon ion beam radiotherapy devices

Professional Standard - Aviation

HB 5484-1991 Quality Inspection of Electron Beam Welding of Titanium and Titanium Alloys

European Committee for Standardization (CEN)

EN ISO 11146:2000 Laser and Laser-Related Equipment - Test Methods for Laser Beam Parameters - Beam Width, Divergence Angle and Beam Propagation Factor ISO 11146: 1999
EN ISO 13919-1:2019 Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 1: Steel, nickel, titanium and their alloys (ISO 13919-1:2019)
EN ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)

International Organization for Standardization (ISO)

ISO 11146:1999 Laser and laser-related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor
ISO 13919-2:2001 Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys
ISO 13919-1:1996 Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel
ISO 13919-1:2019 Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 1: Steel, nickel, titanium and their alloys
ISO 23833:2013 Microbeam analysis - Electron probe microanalysis (EPMA) - Vocabulary
ISO 23833:2006 Microbeam analysis - Electron probe microanalysis (EPMA) - Vocabulary

Association of German Mechanical Engineers

DVS 3210-1995 Test methods for quality assurance of electron beam and laser beam welds
DVS 3208-1994 Quality assurance measures for electronic and laser beam welding
DVS 3210-2007 Test procedures for the quality assurance of electron and laser beam welds
DVS 3203-1-1988 Quality assurance of CO2 laser beam welding works - Process and laser beam welding plants
DVS 3209-2007 Efficiency of electron beam and laser beam welding
DVS 3209-1995 Efficiency of electron beam and laser beam welding
DVS 3214-2009 Laser beam welding irregularities causes and remedies
DVS 3214-2001 Laser beam welding irregularities causes and remedies
DVS 3203-3-1990 Quality assurance of CO2 laser beam welding works - laser beam fabrication weldability of metallic materials
DVS 3207-1-1996 Quality assurance process and laser beam welding system for metal materials Nd:YAG laser beam welding work

German Institute for Standardization

DIN 32540:2012 Laser beam removing - Thermal removing with laser beam - Terms and definitions, influence factors, procedure
DIN V 32540:1997 Laser beam removing - Thermal removing with laser beam - Definitions, influence factors, procedure
DIN 32540:2012-08 Laser beam removing - Thermal removing with laser beam - Terms and definitions, influence factors, procedure
DIN EN ISO 13919-1:2020-03 Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 1: Steel, nickel, titanium and their alloys (ISO 13919-1:2019); German version EN ISO 13919-1:2019
DIN EN ISO 13919-1:1996 Welding - Electrons and laser beam welded joints; guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996); German version EN ISO 13919-1:1996

Korean Agency for Technology and Standards (KATS)

KS B ISO 11146-2020 Lasers and laser-related equipment ― Test methods for laser baem parameters ― Beam widths, divergence angle and beam propagation factor
KS B ISO 11146:2003 Lasers and laser-related equipment-Test methods for laser beam prarameters-Beam widths, divergence angle and beam propagation factor
KS B ISO 11146:2015 Lasers and laser-related equipment ― Test methods for laser baem parameters ― Beam widths, divergence angle and beam propagation factor
KS B ISO 11146:2013 Lasers and laser-related equipment ?; Test methods for laser baem parameters ?; Beam widths, divergence angle and beam propagation factor
KS B ISO 11146-2015(2020) Lasers and laser-related equipment ― Test methods for laser baem parameters ― Beam widths, divergence angle and beam propagation factor
KS B ISO 13919-1:2003 Welding－Electron and laser-beam welded joints－Guidance on quality levels for imperfections－Part 1：Steel

BELST

STB 1149-99 Electron beam and laser welding. Welder joints. Quality levels

AENOR

UNE-EN ISO 11146:2000 LASERS AND LASER-RELATED EQUIPMENT. TEST METHODS FOR LASER BEAM PARAMETERS. BEAM WIDTHS, DIVERGENCE ANGLE AND BEAM PROPAGATION FACTOR (ISO 11146:1999)

SCC

NS-EN ISO 11146:1999 Lasers and laser-related equipment — Test methods for laser beam parameters — Beam widths, divergence angle and beam propagation factor (ISO 11146:1999)
DIN 32540 E:2011 Draft Document - Laser beam removing - Thermal removing with laser beam - Definitions, influence factors, procedure
CIE 076-1988 Intercomparison on measurement of (total) spectral radiance factor of luminescent specimens
CIE 182:2007 Calibration methods and photoluminescent standards for total radiance factor measurements.

GSO

BH GSO ISO 13919-1:2017 Welding -- Electron and laser-beam welded joints -- Guidance on quality levels for imperfections -- Part 1: Steel
OS GSO ISO 13919-1:2015 Welding -- Electron and laser-beam welded joints -- Guidance on quality levels for imperfections -- Part 1: Steel
OS GSO ISO 13919-2:2015 Welding -- Electron and laser beam welded joints -- Guidance on quality levels for imperfections -- Part 2: Aluminium and its weldable alloys
BH GSO ISO 13919-2:2017 Welding -- Electron and laser beam welded joints -- Guidance on quality levels for imperfections -- Part 2: Aluminium and its weldable alloys
GSO ISO 13919-2:2015 Welding -- Electron and laser beam welded joints -- Guidance on quality levels for imperfections -- Part 2: Aluminium and its weldable alloys

British Standards Institution (BSI)

BS EN ISO 13919-1:1997 Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfections. Steel
BS EN ISO 13919-1:2019 Electron and laser-beam welded joints. Requirements and recommendations on quality levels for imperfections - Steel, nickel, titanium and their alloys
BS ISO 14595:2003 Microbeam analysis - Electron probe microanalysis - Guidelines for the specification of certified reference materials (CRMs)
BS ISO 14595:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs)
BS ISO 23833:2013 Microbeam analysis. Electron probe microanalysis (EPMA) Vocabulary

American Society for Testing and Materials (ASTM)

ASTM E2861-16 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
ASTM E2861-16(2020) Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams

Danish Standards Foundation

DS/EN ISO 13919-2:2001 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys
DS/EN ISO 13919-2/A1:2004 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys
DS/EN ISO 13919-1:1997 Welding - Electrons and laser beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel

Association Francaise de Normalisation

NF A89-234/A1:2004 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.
NF EN ISO 13919-1:2019 Electron beam and laser beam welded assemblies - Requirements and recommendations on defect quality levels - Part 1: steel, nickel, titanium and their alloys
NF A89-233*NF EN ISO 13919-1:2019 Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 1 : steel, nickel, titanium and their alloys
NF X21-009:2008 Microbeam analysis - Electron probe microanalysis (EPMA) - Vocabulary.
NF EN ISO 11771:2011 Air quality - Determination of time average mass emissions and emission factors - General approach

Japanese Industrial Standards Committee (JISC)

JIS C 61280-2-11:2010 Fiber optic communication subsystem test procedures -- Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring

GOSTR

GOST ISO 13919-1-2017 Welding. Electron and laser-beam welded joints. Guidance on quality levels for imperfections. Part 1. Steel

RO-ASRO

STAS 13066-1992 Electron beam welded joints in steel. Quality classes

ES-UNE

UNE-EN ISO 13919-1:2020 Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 1: Steel, nickel, titanium and their alloys (ISO 13919-1:2019)

RU-GOST R

GOST R ISO 11771-2016 Air quality. Determination of time-averaged mass emissions and emission factors. General approach

KR-KS

KS B ISO 13919-1-2023 Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 1: Steel, nickel, titanium and their alloys

Others: