The difference between two-step and three-step qPCR methods

The difference between two-step and three-step qPCR methods, Total:87 items.

The international standard classification for "The difference between two-step and three-step qPCR methods" includes: Rotating machinery in general , Generators , Motors , Linear and angular measurements , Construction equipment .

The Chinese standard classification for "The difference between two-step and three-step qPCR methods" includes: Synchronous machine , Asynchronous machine , Electric rotating machinery in general , Special machine , Basic standards and general methods , Medical science , Architectural engineering construction machinery , Communication network in general , Steam turbine and its auxiliary equipment .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 1029-2021 Test procedures for three-phase synchronous machines

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1032-2005 Test procedures for three-phase induction motors
GB/T 8916-1988 Test procedure on working site for measuring the loading percentage of a three phase induction motor
GB/T 1032-1985 Test procedure for three-phase induction motors
GB/T 20137-2006 Method for determining losses and efficiency of three-phase cage induction motors
GB/T 21975-2008 Method of test for reliability of three-phase induction motors for crane and metallurgical application
GB/T 4380-1984 Assessment of departure from roundness--Two and three point methods
GB/T 22669-2008 Test procedures for three-phase permanent magnet synchronous machines
GB/T 1029-1993 Test procedures for three-phase synchronous machines
GB/T 1032-2012 Test procedures for three-phase induction motors
GB/T 1032-2023 Iron ores—Determination of specific surface area—Test method using air-permeability apparatus (Blaine)
GB/T 1029-2005 Test procedures for three-phase synchronous machines

Taiwan Provincial Standard of the People's Republic of China

CNS 15024-4-2006 Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs

Jilin Provincial Standard of the People's Republic of China

DB22/T 3087-2019 A qPCR method for the identification of classic and variant strains of porcine epidemic diarrhea virus

Group Standards of the People's Republic of China

T/SASJL 0030-2024 Hill start capability detection method for autonomous driving buses in cold regions
T/CHATA 016-2021 Procedure of tuberculin skin test-interferon-gamma release assay two-step testing
T/CHCA 001-2019 Technical Guidelines for Three-step and Seven-step Excavation Method of Highway Tunnel
T/EJCCCSE 055-2024 Standards for synchronization of law enforcement data and images during live events
T/SASJL 0033-2024 Testing method for hill start assist performance of autonomous driving buses in cold regions
T/SASJL 0027-2024 Starting ability detection method for autonomous driving buses in cold regions

Professional Standard - Construction Industry

JG/T 5049.2-1994 Vibratory pile hammer Test procedures for vibration resistat asynchronous three-phase motor

Professional Standard - Post and Telecommunication

YDN 117-1999 Planning Method and Organization Principle for Digital Synchronization Network

Professional Standard - Machinery

JB/T 56105-1999 Three-phase Asynchronous Motors Intended to Be Used in Hoisting and Metallurgy Work. Reliability Test Method

RU-GOST R

GOST 10169-1977 3-phase synchronous machines. Test methods

RO-ASRO

STAS 8211-1984 THREE PHASE SYNCHRONOUS MACHINES Methods of test
SR 7246-1998 Three phase asynchronous motors. Test methods
SR 7246/C1-1999 Three phase asynchronous motors. Test methods
STAS 7246/5-1974 ASYNCHRONOUS THREEPHASE MOTORS Test methods No-load test
STAS 7246/4-1974 ASYNCHRONOUS TRIPHASE MOTORS Test methods. Voltage ratio measurement
STAS 7246/2-1974 ASYNCHRONOUS TRIPHASE MOTORS Test methods Reslstance test
STAS E 11017-1978 THREE PHASE ASYNCHRONOUS MOTORS WiTH SHORT-CIRCUITED ROTOR Test method for reliability
STAS 7246/3-1974 ASYNCHRONOUS TRIPHASE MOTORS Test methods. Insulation test
STAS 7246/6-1974 ASYNCHRONOUS THREEPHASE MOTORS Test methods Locked — rotor test
STAS 7246/9-1974 THREE-PHASE INDUCTION MOTORS Methods of test Eeteimination of on load performances

SCC

VDI/VDE 2189 BLATT 3-1994 Description and investigation of three-point step controllers
VDI/VDE 2189 BLATT 3-1994 Description and investigation of three-point step controllers
AWWA ACE65290 Simultaneous Compliance Implications of Current Regulations
BS 4296:1968 Methods of test for determining synchronous machine quantities
BS PD IEC TS 62312-1-1:2018 Guideline for synchronization of audio and video-Measurement methods for synchronization of audio and video equipment and systems. General
AWWA ACE59969 A Twelve-Step Approach to Solving Treatment Problems

VDI - Verein Deutscher Ingenieure

VDI/VDE 2189 Blatt 3-1992 Three-level stepping controllers; methods of evaluation the performance
VDI 6220-2011 Biomimetics - Conception and strategy - Differences between bionic and conventional methods/products

International Organization for Standardization (ISO)

ISO/CD 8426-1:2023 Hydraulic fluid power — Determination of derived displacement of positive displacement pumps and motors — Part 1: One-step and two-step Toet-method
ISO 11334-4:1999 Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs
ISO 11199-3:2005 Walking aids manipulated by both arms - Requirements and test methods - Part 3: Walking tables
ISO 11199-1:1999 Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames
ISO/IEC 15294:2000 Information technology - Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
ISO/IEC TR 15294:2000 Information technology - Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces

Korean Agency for Technology and Standards (KATS)

KS C 4201-1997 Testing methods of three-phase induction motor characteristics
KS C 4201-1986 Testing methods of three-phase induction motor characteristics
KS C 4201-2003 Testing methods of three-phase induction motor characteristics
KS C 4201-2002 Testing methods of three-phase induction motor characteristics
KS C IEC 61972:2015 Method for determining losses and efficiency of three-phase cage induction motors
KS C IEC 61972-2006(2011) Method for determining losses and efficiency of three－phase cage induction motors
KS C IEC 61972:2006 Method for determining losses and efficiency of three-phase cage induction motors
KS X ISO/IEC 15294-2010(2021) Information technology－Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
KS A IEC 61650:2003 Reliability data analysis techniques-Procedures for comparison of two constant failure rates and two constant failure(event) intensities
KS P ISO 11199-3:2011 Walking aids manipulated by both arms-Requirements and test methods-Part 3:Walking tables
KS P ISO 11199-3:2014 Walking aids manipulated by both arms — Requirements and test methods — Part 3: Walking tables
KS P ISO 11199-1:2014 Walking aids manipulated by both arms — Requirements and test methods — Part 1: Walking frames
KS P ISO 11199-1:2011 Walking aids manipulated by both arms-Requirements and test methods-Part 1:Walking frames

PL-PKN

PN E04272-1972 Rotating electrical machinery Thresphase induction motors Tests methods

American Society for Testing and Materials (ASTM)

ASTM D5392-93(2006) Standard Test Method for Isolation and Enumeration ofEscherichia Coli in Water by the Two-Step Membrane Filter Procedure
ASTM D5392-19 Standard Test Method for Isolation and Enumeration of Escherichia coli in Water by the Two-Step Membrane Filter Procedure
ASTM D5392-93(2000) Standard Test Method for Isolation and Enumeration of Escherichia Coli in Water by the Two-Step Membrane Filter Procedure
ASTM D5392-14 Standard Test Method for Isolation and Enumeration of Escherichia Coli in Water by the Two-Step Membrane Filter Procedure
ASTM D7257-06(2011) Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
ASTM D3481-06(2011) Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
ASTM D5392-24 Standard Test Method for Isolation and Enumeration of Escherichia coli in Water by the Two-Step Membrane Filter Procedure

Association Francaise de Normalisation

NF S96-310*NF EN ISO 11334-4:1999 Walking aids manipulated by one arm. Requirements and test methods. Part 4 : walking sticks with three or more legs.
NF S96-303-3*NF EN ISO 11199-3:2005 Walking aids manipulated by both arms - Requirements and test methods - Part 3 : walking tables
NF S96-303:1999 Walking aids manipulated by both arms. Requirements and test methods. Part 1 : walking frames.

International Electrotechnical Commission (IEC)

IEC 61972:2002 Method for determining losses and efficiency of three-phase cage induction motors

British Standards Institution (BSI)

BS EN ISO 11199-3:2005 Walking aids manipulated by both arms - Requirements and test methods - Walking tables
BS EN ISO 11199-1:1999 Walking aids manipulated by both arms - Requirements and test methods - Walking frames
PD IEC TS 62312-2:2018 Guideline for synchronization of audio and video. Methods for synchronization of audio and video systems
BS EN ISO 11334-4:1999 Walking aids manipulated by one arm - Requirements and test methods - Walking sticks with three or more legs
BS DD IEC/TS 62312-2:2007 Guideline for synchronization of audio and video - Methods for synchronization of audio and video systems

International Telecommunication Union (ITU)

ITU-T X.52 FRENCH-1988 METHOD OF ENCODING ANISOCHRONOUS SIGNALS INTO A SYNCHRONOUS USER BEARER
ITU-T X.520 CORR 1-2008 Information technology ?Open Systems Interconnection ?The Directory: Selected attribute types Technical Corrigendum 1 Study Group 17
ITU-T X.52-1988 METHOD OF ENCODING ANISOCHRONOUS SIGNALS INTO A SYNCHRONOUS USER BEARER

VN-TCVN

TCVN 2280-1978 Three-phase asynchronous electric motors 100 W and higher power.Test methods

European Committee for Standardization (CEN)

EN ISO 11334-4:1999 Walking Aids Manipulated by One Arm - Requirements and Test Methods - Part 4: Walking Sticks with Three or More Legs ISO 11334-4:1999
EN ISO 11199-1:2021 Assistive products for walking manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:2021)

Danish Standards Foundation

DS/ISO/IEC TR 15294:2001 Information technology - Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces

German Institute for Standardization

DIN EN ISO 11199-3:2005 Walking aids manipulated by both arms - Requirements and test methods - Part 3: Walking tables (ISO 11199-3:2005); German version EN ISO 11199-3:2005

IX-EU/EC

2004/86/EC-2004 COMMISSION DIRECTIVE amending, for the purposes of adapting to technical progress, Council Directive 93/93/EEC on the masses and dimensions of two or three-wheel motor vehicles (Text with EEA relevance)

Others: