Standard curve abscissa correction

Standard curve abscissa correction, Total:112 items.

The international standard classification for "Standard curve abscissa correction" includes: Optical measuring instruments , Application of statistical methods , Noise with respect to human beings , Geology. Meteorology. Hydrology , Nuclear power plants. Safety .

The Chinese standard classification for "Standard curve abscissa correction" includes: Length Measurement , Pressure vessel , Optical testing instrument , Mathematics , Acoustic Measurement , Hydrology and water conservancy instrument , AC/DC electrical instrument recording instrument , Telescope, geodetic survey and aerial survey instrumentation .

National Metrological Technical Specifications of the People's Republic of China

JJF 1735-2018 Calibration Specification for High Frequency Q Value Standard Coil Sets
JJF 1408-2013 Calibration Specification for Articulated Arm Coordinate Measuring Machines
JJF 1064-2010 Calibration Specification for Coordinate Measuring Machine
JJF 1064-2000 Calibration Specification for Coordinate Measuring Machines
JJF 1064-2004 Coordinate Measuring Machine Calibration Specification
JJF 1251-2010 Calibration Specification for Measuring System of Coordinate Position
JJF 2002-2022 Calibration Specifications for Laser Line Markers
JJF 1242-2010 Calibration Specification for Laser Tracker 3-Dimensional Measuring System
JJF 1422-2013 Calibration Specification for Coordinate Measuring Spheres
JJF 1064-2024 Calibration Specification for Coordinate Measuring Machines

Professional Standard - Aerospace

QJ 3088-1999 Calibration Method for Positive Presure Standard Leak Hole

Taiwan Provincial Standard of the People's Republic of China

CNS 6840-1980 Standard Liquid for Calibrating Viscometers

Group Standards of the People's Republic of China

T/SXCAA 012-2021 Guidelines for Quality Control of Linear Calibration Curves
T/SMA 0034-2023 Calibration Specification for Coordinate Measuring System By Transfer Station ——Based on Target Aiming Part

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22542.1-2008 Instrument for dam monitoring - Pendulum coordinometer - Part 1: Step motor type pendulum coordinometer
GB/T 36063-2018(英文版) Nanotechnology: Standard Raman frequency shift curves for Raman spectroscopy calibration
GB/T 36063-2018e Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/T 22554-2010 Linear calibration using reference materials
GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/T 4963-2007 Acoustics—Normal equal-loudness-level contours

未注明发布机构

DIN ISO 226 E:2001-11 Acoustics - Normal equal-loudness-level contours

Military Standard of the People's Republic of China-General Armament Department

GJB 9120-2017 Military Length Baseline Calibration Standard

Professional Standard - Electricity

DL/T 327-2010 Step motor type pendulum telecoordinometer
DL/T 1061-2020 Phoroeletric CCD pendulum telecoordinometer
DL/T 1061-2007 Photoelectric type (CCD) pendulum telecoordinometer
DL 1061-2020 Photoelectric CCD vertical coordinate meter
DL/T 1019-2019 Capacitance coordinometer
DL/T 327-2023 Step motor type pendulum telecoordinometer
DL/T 1019-2006 Capacitance coordinometer

Society of Automotive Engineers (SAE)

SAE ARP958D-1999 Electromagnetic Interference Measurement Antennas; Standard Calibration Method

Japanese Industrial Standards Committee (JISC)

JIS Z 8461:2001 Linear calibration using reference materials
JIS Z 4334:1992 Reference sources for the calibration of surface contamination monitors

AGMA - American Gear Manufacturers Association

98FTM6-1998 Calibration of Master Gears on Coordinate Measurement Machines

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 173-1959 Standards on Navigation Aids: Direction Finder Measurements (Correction)

American Gear Manufacturers Association

AGMA 98FTM6-1998 Calibration of Master Gears on Coordinate Measurement Machines

PL-PKN

PN P55036-1972 Correction signs and execu?iono? correction

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions
IEEE/ANSI N42.28-2002 American National Standard Calibration of Germanium Detectors for In-Situ Gamma-Ray Measurements

German Institute for Standardization

DIN 4895-1:1977-11 Orthogonal coordinate systems; general concepts
DIN 4895-1:1977 Orthogonal coordinate systems; general concepts
DIN ISO 11095:2008 Linear calibration using reference materials (ISO 11095:1996); Text German and English
DIN 4895-2:1977 Orthogonal coordinate systems; differential operators of vector analysis
DIN EN ISO 19111/A2:2023-03 Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/DAM 2:2023); English version EN ISO 19111:2020/prA2:2023 / Note: Date of issue 2023-01-27*Intended as an amendment to DIN EN ISO 19111 (2020-09).
DIN 4895-2:1977-11 Orthogonal coordinate systems; differential operators of vector analysis

American Society of Mechanical Engineers (ASME)

ASME B89/TR-1990 Parametric calibration of coordinate measuring machines
ASME B89 REPORT-1990 Technical Report 1990, Parametric Calibration of Coordinate Measuring Machines
ASME A17.6-2010 Standard for Elevator Suspension, Compensation, and Governor Systems

Korean Agency for Technology and Standards (KATS)

KS M 2200-1996 Standard volume correction table for tar and coal-tar pitch
KS A ISO 11095:2012 Linear calibration based on standard samples
KS A ISO 11095:2007 Linear calibration using reference materials
KS Q ISO 11095:2012 Linear calibration using reference materials
KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS X ISO/IEC 6709:2011 Standard representation of geographic point location by coordinates
KS M 2200-1996(2021) Standard volume correction table for tar and coal-tar pitch

American Society for Testing and Materials (ASTM)

ASTM B478-85(2016) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM D633-11 Standard Volume Correction Table for Road Tar
ASTM E1361-90(1999) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1361-02(2021) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM D2162-14 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM D2162-06 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM B263-99 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM D2162-13 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM D648-01 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-00a Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D2865-01 Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM D347-04 Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and Coal Tar
ASTM D2865-95 Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM D2162-99 Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM C1426-99 Standard Practices for Verification and Calibration of Polarimeters
ASTM E1361-02 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1622-94(1999)e1 Standard Practice for Correction of Spectral Line Overlap in Wavelength-Dispersive X-Ray Spectrometry (Withdrawn 2006)
ASTM E561-21 Standard Test Method for K R Curve Determination
ASTM E561-20 Standard Test Method for K R Curve Determination
ASTM E1361-02(2014)e1 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM C1426-09 Standard Practices for Verification and Calibration of Polarimeters
ASTM E561-19 Standard Test Method for K R Curve Determination

API - American Petroleum Institute

API STD 2541-1968 STANDARD TABLES FOR POSITIVE DISPLACEMENT METER PROVER TANKS

Association Francaise de Normalisation

NF Z69-204*NF EN ISO 6709:2010 Standard representation of geographic point location by coordinates.
NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours
NF Z52-016*NF EN ISO 19111/A1:2021 Geographic information - Referencing by coordinates - Amendment 1
NF X06-500*NF ISO 11095:1996 Linear calibration using reference materials.
NF EN IEC 60263:2020 Graph scales and dimensions for plotting frequency response curves and polar diagrams

British Standards Institution (BSI)

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
BS EN ISO 15530-3:2011 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Use of calibrated workpieces or measurement standards

International Organization for Standardization (ISO)

ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 19111:2019/DAmd 2 Geographic information — Referencing by coordinates — Amendment 2
ISO 11095:1996 Linear calibration using reference materials
ISO 226:2003 Acoustics - Normal equal-loudness-level contours
ISO 19111:2019/PRF Amd 2 Geographic information — Referencing by coordinates — Amendment 2
ISO 19111:2019/Amd 2:2023 Geographic information — Referencing by coordinates — Amendment 2

RU-GOST R

GOST 9735-1987 Profile grinders. Standards of accuracy

CZ-CSN

CSN ON 13 9874-1963 Accessories. coordinate. Specifications
CSN ON 85 5108-1962 Medical needle species "Og" weak, curved, with angular cross section △ specification standard

American National Standards Institute （ANSI)

ANSI/IEEE 1309:2005 Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz
ANSI/ASME A17.6-2010 Standard for Elevator Suspension, Compensation and Governor Systems

U.S. Air Force

AIR FORCE MIL-STD-859 A REINST NOTICE 3-2006 STANDARD CALIBRATION TABLE FOR AERONAUTICAL PRESSURE MEASURING EQUIPMENT
AIR FORCE MIL-STD-859 A-1968 STANDARD CALIBRATION TABLE FOR AERONAUTICAL PRESSURE MEASURING EQUIPMENT
AIR FORCE MIL-STD-859 A NOTICE 1-1979 STANDARD CALIBRATION TABLE FOR AERONAUTICAL PRESSURE MEASURING EQUIPMENT

SCC

BS 5261C:1976 Copy preparation and proof correction-Marks for copy preparation and proof correction (extracted from BS 5261-2:1976)
AWPA F4-01 Standard Volume Correction Table for Creosote-Petroleum Solutions
AWPA F4-00 Standard Volume Correction Table for Creosote-Petroleum Solutions
AASHTO R 75-2016(2020) Standard Practice for Developing a Family of Curves