The main components of sem conductive adhesive

The main components of sem conductive adhesive, Total:89 items.

The international standard classification for "The main components of sem conductive adhesive" includes: Aluminium and aluminium alloys , Adhesives , Burners and Boilers in general , Lifts. Escalators , Wood-protecting chemicals , Integrated circuits. Microelectronics .

The Chinese standard classification for "The main components of sem conductive adhesive" includes: Light metals and their alloys analysis method , Basic standards and general methods for adhesives , Boiler and its auxiliary equipment , Elevator , Corrosion protection for wood and bamboo , Coal analysis methods .

---

Professional Standard - Electron

• SJ 50597/41-1996 Semiconductor integrated circuits-Detail specification for Type JE10531 ECL dual D master-slave flip-flop
• SJ/T 10152-1991 Terms relating to main equipment for integrated circuit technologies

Jilin Provincial Standard of the People's Republic of China

• DB22/T 2259-2015 Determination of Main Component Content of Sika Antler Dishes

Professional Standard - Electricity

• DL/T 399-2010 Supervision guide for main electric equipments of ±800kV and under DC transmission projects
• DL/T 399-2020 Supervision guide for main electric equipment of DC transmission projects

Professional Standard - Non-ferrous Metal

• YS/T 739-2010 Determination of cryolite rate and main components of electrolyte—X-ray fluorescence spectrometric analysis method

Professional Standard - Forestry

• LY/T 3348-2023 Testing methods for main chemical components of bamboo

Group Standards of the People's Republic of China

• T/FSI 043-2019 Addition-type high thermal conductivity silicone potting compound for electronic appliances
• T/SHDSGY 051-2023 Low temperature curing single component conductive adhesive
• T/TSIP 004-2023 Technical requirements for conductive rubber in the industrial field
• T/CEC 220-2019 Guide of configuration for main equipment of pumped storage power station

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 16997-1997 Adhesives - Designation of main failture patterns
• GB/T 30580-2014 The Technical Guide for the Life Assessment of Main Pressure Parts of Power Plant Boiler

Shandong Provincial Standard of the People's Republic of China

• DB37/T 3888-2020 Guidelines for safety assessment of old lift and its main parts

Professional Standard - Business

• SB/T 10404-2006 Determination of active components in waterborne preservatives and fire-retardants

Professional Standard - Aerospace

• QJ 2658-1994 Semiconductor Integrated Circuit TTL - Detailed Specification for MHZ Principal Frequency Oscillator MF05

Professional Standard - Textile

• FZ/T 30001-1992 Systematic Quantitative Analysis Method for Main Chemical Components of Ramie

Professional Standard - Commodity Inspection

• SN/T 1599-2005 Determination for major elements in coal ash by ICP-AES

Yunnan Provincial Standard of the People's Republic of China

• DB53/T 497-2013 Guidelines for the establishment and verification of near-infrared calibration models for the main chemical constituents of tobacco and tobacco products

国家市场监督管理总局、中国国家标准化管理委员会

• GB/T 30580-2022 The technical guide for the life assessment of main pressure parts of power plant boiler

Korean Agency for Technology and Standards (KATS)

• KS H 2019-2012 Beverage base
• KS M ISO 10365-2004(2019) Adhesives－Designation of main failure patterns
• KS B 0110-2001 Glossary of terms relating to reciprocating internal-combustion engines(Main parts)
• KS B 0110-1985 Glossary of terms relating to reciprocating internal-combustion engines(Main parts)
• KS C IEC 60748-11:2004 Semiconductor devices－Integrated circuits－Part 11：Sectional specification for semiconductor integrated circuits excluding hybrid circuits
• KS C IEC 60748-11:2020 Semiconductor devices — Integrated circuits — Part 11:Sectional specification for semiconductor integrated circuits excluding hybrid circuits

RO-ASRO

• STAS 12347-1985 Finishing machinery GUIDE ROLLERS Main dimensions
• STAS 10350-1983 DIGITAL INTEGRATED CIRCUITS Terminology and classified list of main parameters
• STAS 12161-1984 DIGITAL' INTEGRATED CIRCUITS Measuring methods of main electrical parameters
• STAS 5674/1-1986 WOODEN REELS FOR WIRES, CONDUITS AND CABLES Types and main parameters
• STAS 11664-1986 General use rubber belt conveyers ELECTRODRUMS Main parameters
• STAS 11206-1980 Linear integrated circuits OPERATIONAL AMPLIFIERS Methods of measurement for the main parameters
• STAS 5101-1955 Agricultural equipment. The main part of the plow. The main parameters

BE-NBN

• NBN S 32-113-1984 Capsulated dental silicate and silico-phosphate filling materials
• NBN S 32-114-1984 Resin-based dental filling materials
• NBN S 32-120-1984 Dental gypsum produccs

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

• IPC CA-821-1995 General Requirements for Thermally Conductive Adhesives
• IPC 3408-1996 General Requirements for Anisotropically Conductive Adhesive Films

IT-UNI

• UNI 5006-1962 Printing alloy whose main component is lead

International Telecommunication Union (ITU)

• ITU-R BT.654-1986 Subjective quality of television pictures in relation to the main impairments of the analogue composite television signal

SCC

• NS 3090:1970 Portlandcement — Methods for determination of the main constituents
• AWWA CSC92090 Consensus Building: A Prime Component in a Successful Maintenance Management System

IPC - Association Connecting Electronics Industries

• IPC 3408 CD-1996 General Requirements for Anisotropically Conductive Adhesive Films

HU-MSZT

• MSZ KGST 2564-1980 General technical requirements for electrical relative workpieces of dominant technologies
• MSZ 24007/1-1979 Filter units with ducts, main index
• MSZ 13274-1970 Rubber conveyor belt. Main ball spacing and access dimensions
• MSZ 11110-1964 Detection and classification of main characteristics of electric current
• MSZ 13260-1968 Rubber conveyor belt ball separation main and access dimensions

AENOR

• UNE 31002:1994 DERIVATION OF THE MAIN THEORETICAL CHARACTERISTICS OF EXPLOSIVES.

United States Navy

• NAVY MIL-C-24945-1988 COVERALLS, FLAME RESISTANT (COTTON FRT)
• NAVY QPL-24135-41-2007 HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, FOR FLEXIBLE HOSE ASSEMBLIES GENERAL SPECIFICATION FOR
• NAVY QPL-24136-36-2004 HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES, GENERAL SPECIFICATION FOR
• NAVY MIL-H-24135 B SUPP 1-1993 HOSE, SYNTHETIC RUBBER, WIRE REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES, GENERAL SPECIFICATION FOR
• NAVY MIL-H-24135 B-1993 HOSE, SYNTHETIC RUBBER, WIRE REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES, GENERAL SPECIFICATION FOR
• NAVY MIL-C-82621-1972 CABLE, ELECTRIC, MISSILE, 54-CONDUCTOR
• NAVY MIL-C-82621 REINST NOTICE 2-1998 CABLE, ELECTRIC, MISSILE, 54-CONDUCTOR
• NAVY MIL-C-82621 (1)-1973 CABLE, ELECTRIC, MISSILE, 54-CONDUCTOR

Association Francaise de Normalisation

• NF T76-130:1995 Adhesives. Designation of main failure patterns.
• FD E29-307:2005 Industrial valves - Nomenclature of the constituent parts of the principal valves
• FD D90-307*FD CEN/TR 17236:2020 Electronic cigarettes and e-liquids - Constituents to be measured in the aerosol of vaping products
• FD CEN ISO/TR 8546:2022 Hand Protection - Guidelines for Selection and Use
• NF C96-045:1992 Semiconductors devices. Integrated circuits. Part 11 : sectional specification for semiconducteur integrated circuits excluding hybrid circuits
• XP ISO/TS 16095:2021 Regenerated rubber derived primarily from products containing natural rubber - Assessment method
• NF EN IEC 62561-2:2018 Components of lightning protection systems (CSPF) - Part 2: requirements for conductors and earth electrodes

IN-BIS

• IS 1885 Pt.21/Sec.4-1988 Electrician's Glossary Part 21 Antennas Section 4: Terms related to antennas and antenna elements consisting primarily of radiating conductors
• IS 6553-1971 Environmental requirements for semiconductor devices and integrated circuits

German Institute for Standardization

• DIN 28058-2:1989-01 Lead used in apparatus engineering; lead of semi-finished product designs

International Organization for Standardization (ISO)

• ISO 21466:2019 Microbeam analysis — Scanning electron microscopy — Method for evaluating critical dimensions by CD-SEM
• ISO 1853:1998 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity

Indonesia Standards

• SNI 13-3608-1994 Test method for chemical composition main substance of xeolits

CZ-CSN

• CSN 34 7470-1 ZA18-1997 The rated voltage of rubber cables and conductors is 450/750V. Part 1: General Requirements
• CSN 35 1605-1988 Power semiconductor devices. Main and connecting dimensions

British Standards Institution (BSI)

• 18/30344520 DC BS ISO 21466. Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CD-SEM
• BS IEC 60748-11:1991 Semiconductor devices. Integrated circuits. Sectional specification for semiconductor integrated circuits excluding hybrid circuits
• BS IEC 60748-11:2000 Semiconductor devices - Integrated circuits - Sectional specification for semiconductor integrated circuits excluding hybrid circuits

GSO

• OS GSO ISO/TS 16095:2015 Reclaimed rubber derived from products containing mainly natural rubber -- Evaluation procedure
• OS GSO 1414:2002 Methods of test for animal feeds part1:determination of essential composition
• OS GSO IEC 60748-11:2014 Semiconductor devices - Integrated circuits - Part 11: Sectional specification for semiconductor integrated circuits excluding hybrid circuits

(U.S.) Ford Automotive Standards

• FORD ESF-M4G313-A-1990 SEALER, SILICONE RUBBER, TWO COMPONENT - FORM IN PLACE

PL-PKN

• PN T01305-1992 Semiconductor devices. Integrated circuits. Sectional specificatiion for semiconductor integrated circuits excluding hybrid circuits

NEMA - National Electrical Manufacturers Association

• NEMA XR 6-1979 LOCATION OF PRIMARY OPERATING CONTROLS FOR SPOT-FILM DEVICES

UY-UNIT

• UNIT 98-1953 Conductor with thermoplastic (the plastic component is mainly polyvinyl chloride or ethylene acetate polymer)
• UNIT 126-1958 Circuit composite conductors with thermoplastic insulators (the plastic component is mainly polyethylene chloride or ethylene acetate polymer)

CEN - European Committee for Standardization

• PD CEN/TR 17236:2018 Electronic cigarettes and e-liquids - Constituents to be measured in the aerosol of vaping products

European Committee for Standardization (CEN)

• CEN/TR 17236:2018 Electronic cigarettes and e-liquids - Constituents to be measured in the aerosol of vaping products

KR-KS

• KS C IEC 60748-11-2020 Semiconductor devices — Integrated circuits — Part 11:Sectional specification for semiconductor integrated circuits excluding hybrid circuits

Japanese Industrial Standards Committee (JISC)

• JIS K 6866:1999 Adhesives -- Designation of main failure patterns

Danish Standards Foundation

• DS/IEC 748-11/A1,2:2001 Semiconductor devices - Integrated circuits - Part 11: Sectional specification for semiconductor integrated circuits excluding hybrid circuits

Society of Automotive Engineers (SAE)

• SAE J560-2009 Primary and Auxiliary Seven Conductor Electrical Connector for Truck-Trailer Jumper Cable

Others: