What is the difference between insulation and voltage resistance?

What is the difference between insulation and voltage resistance?, Total:400 items.

The international standard classification for "What is the difference between insulation and voltage resistance?" includes: Motors , Electrical accessories in general , Power stations in general , Insulating gases , Transformers. Reactors , Cables , Insulating materials in general , Other insulating materials , Other standards related to electricity and magnetism , Aerospace electric equipment and systems .

The Chinese standard classification for "What is the difference between insulation and voltage resistance?" includes: Signal equipment , Asynchronous machine , Electric rotating machinery in general , Electric power testing technique , Basic standards and general methods , Basic standards and general methods for adhesives , Transformer , Cable and its accessory , Electrical insulating material and its products , High voltage switchgear , Electrical system and equipment , Technical management .

Taiwan Provincial Standard of the People's Republic of China

CNS 3988-2000 Dielectric Properties of Control Device
CNS 14256-1998 Method of test for withstand voltage of personal protective equipment and insulation devices
CNS 9808-1983 Method of Test for Control Gear Insulation

Professional Standard - Railway

TB/T 1448-1982 Insulation and Voltage Resistance for Communication Signal Products

Professional Standard - Machinery

JB/T 9588.2-1999 Test method for ceramic insulators of spark plug.Test method for voltage proof
JB/T 7589-1994 Evaluation method for heat resistance of insulation structure of high voltage motor
JB/T 7589-2007 Thermal evaluation methods of insulation systems for high-voltage electrical machines
JB/T 10316-2013 Insulation Supporting Devices and Materials for Low-voltage Switchgear and Controlgear Assemblies
JB/T 7082-1993 Dielectric Withstand Testing Instruments for Insulating Medium
JB/T 5892-1991 Technical specification for organic compound insulators for high tension lines
JB/T 12167-2015 Unsaturated polyester glass mat laminated sheet for electrical insulation
JB/T 6204-2002 Specifications for Withstanding Voltage Test Oil Stator Coil and
JB/T 7082-2013 Dielectric voltage-withstand tester
JB/T 7616-1994 Steep current impulse resistance test for insulator of high-tension lines

国家铁路局

TB/T 1448-2018 Isolation voltage of railway communication & signal product

Professional Standard - Electricity

DL/T 555-2004 Guide for withstand voltage and insulated test of gas-insulated metal-enclosure switchgear on site
DL 474.4-1992 Guidelines for Implementation of On-Site Insulation Tests AC Withstand Voltage Test
DL/T 474.4-2018 Guide for insulation test on site AC voltage withstanding test
DL/T 474.4-2006 Guide for insulation test on site AC voltage withstanding test
DL/T 555-1994 Guide for Withstand Voltage Test of Gas-Insulated Metal-Enclosure Electric Appliance on Site

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 1094.3-1985 Power transformers-Part 3: Insulation levels and dielectric tests
GB/T 22718-2008 Thermal evaluation methods of insulation systems for high-voltage electrical machines
GB/T 29311-2012 Electrical insulating materials—A.C.voltage endurance evaluation—Introduction
GB/T 11026.8-2014 Electrical insulating materials—Thermal endurance properties—Part 8:Determination of thermal endurance indices(TI and RTE)of an insulating material using the fixed time frame method
GB/T 11021-1989 Thermal evaluation and classification of electrical insulation
GB/T 5013.3-2008 Rubber insulated cables of rated voltages up to and including 450/750V - Part 3: Heat resistant silicone insulated cables
GB/T 1094.3-2017 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
GB/T 11021-2014 Electrical Insulation -Thermal Evaluation and Designation
GB/T 14517-1993 Test method for dielectric strength of insulating adhesive tape at power frequency
GB/T 10237-1988 Power transformers-Insulation levels and dielectric tests external clearances in air
GB/T 30846-2014 High-voltage alternating current circuit-breakers with intentionally non-simultaneous pole operation
GB 5013.3-1997 Rubber insulated cables of rated voltages up to and including 450/750V Part 3:Heat resistant silicone insulated cables
GB 1094.3-2003 Power transformers？Part 3:Insulation levels,dielectric tests and external clearances in air

Group Standards of the People's Republic of China

T/GDWCA 0031-2018 Rated voltage 450/750V double insulation flame retardant acid and alkali resistant cable
T/ZZB 0569-2018 Cable television system-Physical foaming polyethylene insulated coaxial cable
T/YGWCA YGWCA03-2021 Cross-linked polyolefin insulated wires & cables for maximum conductor temperature of 90℃ in normal operation with rated voltage of 450/750V
T/CEEIA 294-2017 Thermal evaluation of high temperature electrical insulation systems of nature ester transformer
T/GDAQI 018-2019 Overload non-combustible silicone insulated cables of rated voltages up to and including 450/750 V

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 29311-2020 Electrical insulating materials and systems—AC voltage endurance evaluation

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35856-2018 Methods of insulation resistance test and resistant high voltage test for aircraft electrical equipment

机械工业部

JB 6204-1992 Specifications for stator insulation withstand voltage test of large high-voltage AC motors

机械电子工业部

JB 5892-1991 Technical conditions for organic composite insulators for high-voltage lines

中华人民共和国国家质量监督检验检疫总局

GB/T 1094.3-2003 Power transformers--Part 3: Insulation levels，dielectric tests and external clearances in air

Professional Standard - Automobile

QC/T 433-1999 Test method for ceramic insulators of spark plugs - Test method for pressure resistance

未注明发布机构

CSA C227.4-2021 Three-phase, pad-mounted distribution transformers with separable insulated high-voltage connectors
SAE AS5259/4-2017 CRIMPING TOOL AND ACCESSORIES, REMOTE CRIMP HEAD, HYDRAULIC, WIRE SIZE 8 TO 00 UN-INSULATED AND 8 THRU 2 INSULATED CRIMP BARRELS
DIN VDE 0282-15:2000 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1587-2015 SF6 gas insulated transformer with voltage transformer function for high voltage station

Professional Standard - Energy

NB/T10824-2021 Guidelines for fire resistance rating assessment of insulating materials used in converter transformers
NB/T 10824-2021 Guidle for fireproof endurance rating assessment of insulating materails for eonverter transformer

Shanxi Provincial Standard of the People's Republic of China

DB14/T 1044-2015 Rated voltage 450/750V weather-resistant PVC insulated overhead wire

Professional Standard - Electron

SJ 2215.14-1982 Method of measurement for input-to-output isolation voltage of semiconductor photocouplers

Professional Standard - Radio Television Film

GY/T 136-1998 Specifications and methods of measurement on coaxial cable with bamboo type polyethylene insulation used in CATV systems

SCC

AS 3608:1989 Insulators - Porcelain and glass, pin and shackle type - Voltages not exceeding 1000 V a.c.
AS 4045.2:1995 Prepared unshaped refractory materials - Insulating
MIL MIL-S-81824/3-1984 SPLICE, COAXIAL CABLE, ELECTRIC, PERMANENT, CRIMP STYLE COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1
DANSK DS/EN 60660:2001 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV
CEI EN 60660:2000 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV
CEI 20-68:2002 Cables with reduced thickness extruded insulation, insulated with XLPE under a thermoplastic sheath with impact resistance characteristics - Cables with nominal voltage 12/20 kV
DANSK DS/EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation
CEI EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation
IEC 60702:1981 Mineral insulated cables with a rated voltage not exceeding 750 V
IEC TS 61251:1993 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
AS 1137.2:1972 Insulators - Porcelain and glass pin and shackle insulators for overhead power lines (for voltages not exceeding 1000 V a.c.)
BS 6207-2:1995 Mineral insulated cables with a rated voltage not exceeding 750 V-Terminations
AS 1137.2:1981 Insulators, Part 2: Porcelain and glass pin and shackle insulators for overhead power lines (for voltages not exceeding 1000 V a.c.)
DIN VDE 0302-7:1989 Insulation systems of electrical equipment; mechanical endurance functional tests for electrical insulation systems; identical with IEC 60941:1988 (report)
DANSK DS/EN 14367:2005 Non controllable backflow preventer with different pressure zones - Familiy C, type A
BS 6207-1:1995 Mineral insulated cables with a rated voltage not exceeding 750 V-Cables
UNE-HD 603-5N:1995 DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV. XLPE INSULATED CABLES UNARMOURED. CABLES WITHOUT CONCENTRIC CONDUCTOR (TYPE 5N)
AENOR UNE 20448:1992 Concentric cables with polyvinyl chloride insulation and cover for voltages up to 1,000 V.
MIL MIL-S-81824/4-1990 SPLICES, ELECTRIC, PERMANENT, CRIMP STYLE, COPPER, INSULATED, ENVIRONMENT RESISTANT, SPLICE, SHIELD, SOLDER TYPE, INSULATED, CLASS I
UNE 20448:1992 POLYVINYL CHLORIDE INSULATED AND SHEATED CONCENTRIC CABLES OF RATED VOLTAGES UP TO 1000 V.
AS C50:1928 Dimensions of insulated annealed copper conductors for electric power and light including voltage tests (This specification does not deal with the composition, quality or durability of the insulating material used as the dielectric.)
CEI UNEL 35024/2:1997 Mineral insulated electrical cables for nominal voltages not exceeding 1000 V in alternating current and 1500 V in direct current - Current carrying capacity in permanent regime for installation in air
AENOR UNE-EN 14367:2006 Non controllable backflow preventer with different pressure zones - Family C, type A.
DANSK DS/HD 22.3 S4:2004 Cables of rated voltages up to and including 450/750 V and having crosslinked insulation Part 3: Heat resistant silicone rubber insulated cables
DIN VDE 0282-3:2006 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 3: Heat resistant silicone rubber insulated cables; German version HD 22.3 S4:2004 + A1:2006
BS 7655-1.4:1993 Specification for insulating and sheathing materials for cables. Elastomeric insulating compounds-Oil resisting types
UNE 21027-15:1999 RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 15: MULTICORE CABLES INSULATED AND SHEATHED WITH HEAT RESISTANT SILICONE RUBBER.
UNE 21027-15:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation -- Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber
AWWA ACE92030 Water Quality and Treatment: What's Different in British Columbia?
AENOR UNE 21027-3:1983 RUBBER INSULATED CABLES WITH NOMINAL VOLTAGES U0/U LOWER OR EQUAL TO 450/750 V. HEAT RESISTANT SILICONE INSULATED CABLES
UNE 21027-3:2004 Cables of rated voltages up to and including 450/750 V and having crosslinked insulation - Part 3: Heat resistant silicone rubber insulated cables
AS 1137.1:1972 Insulators - Porcelain and glass insulators for overhead power lines (for voltages greater than 1000 V a.c.)
DANSK DS/HD 22.12 S2:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 12: Heat resistant EPR cords and flexible cables
UNE-EN 1094-5:1996 INSULATING REFRACTORY PRODUCTS. PART 5: DETERMINATION OF COLD CRUSHING STRENGTH.
DIN EN 61251 E:2014 Draft Document - Electrical insulating materials - A.C. voltage endurance evaluation (IEC 112/294/CDV:2014); German version FprEN 61251:2014
CAN/CSA-C227.4-2006(R2011) Three-Phase, Pad-Mounted Distribution Transformers with Separable Insulated High-Voltage Connectors
CAN/CSA-C227.4-2006(C2011) Three-phase, pad-mounted distribution transformers with removable insulated high-voltage connectors
IEC 60227:1967 Polyvinyl chloride insulated flexibles cables and cord with circular conductors and rated voltage not exceeding 750 V
UNE 211002:2008 Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation -- Single core cables, resistant to flame propagation, insulated with halogen-free thermoplastic compound, for fixed wiring
AS 1137.1:1981 Insulators, Part 1: Porcelain and glass insulators for overhead power lines (for voltages greater than 1000 V a.c.)
UNE-HD 603-7C:1995 DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV. EPR INSULATED CABLES UNARMORED. CABLES WITHOUT CONCENTRIC CONDUCTOR (TYPES 7C-1, 7C-2, 7C-3, 7C-4)
AS C62:1965 Insulating oil for transformers and switchgear
UNE 21027-12:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation -- Part 12: Heat resistant EPR cords and flexible cables
AENOR UNE 21111:1970 PORCELAIN INSULATORS FOR AIRLINES WITH VOLTAGE NOT HIGHER THAN 1000 V. GENERAL CHARACTERISTICS
IEC 60245-3:1980/AMD1:1985 Amendment 1 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables

Japanese Industrial Standards Committee (JISC)

JIS C 3845:1995 Low-voltage shackle type insulators
JIS C 9742:2000 Isolating transformers and safety isolating transformers -- Requirements
JIS C 9742 ERRATUM 1:2001 Isolating transformers and safety isolating transformers -- Requirements (Erratum 1)
JIS T 8010:1979 Testing method for withstand voltage of personal protective equipment and insulating devices
JIS T 8010:2001 Testing method for withstand voltage of personal protective equipment and insulating devices
JIS T 8010:2017 Testing method for withstand voltage of personal protective equipment and insulating devices
JIS E 4014:2012 Rolling stock -- Test methods for insulation resistance and withstand voltage
JIS C 3663-3:1998 Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 3: Heat resistant silicone insulated cables
JIS E 4014:2007 Rolling stock -- Test methods for insulation resistance and withstand voltage
JIS E 4014:1989 Test methods for insulation resistance and withstand voltage of railway rolling stock
JIS C 3663-3:2003 Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 3: Heat resistant silicone insulated cables
JIS E 3021:1999 Insulation resistance and withstand voltage testing methods of parts for railway signaling

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 61462:2023 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V - Definitions, test methods, acceptance criteria and design recomme...
EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation
EN 60660:1999 Insulators Tests on Indoor Post Insulators of Organic Material for Systems with Nominal Voltages Greater Than 1 kV up to but Not Including 300 kV
HD 22.3 S3/A1-1999 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber Insulated Cables
HD 398.3-1986 Power Transformers Insulation Levels and Dielectric Tests

Standard Association of Australia （SAA）

AS 4045.2:2006 Prepared unshaped refractory materials - Insulating
AS 3608:2005 Insulators - Porcelain and glass, pin and shackle type - Voltages not exceeding 1000 V a.c.
AS 1617.2:2003(R2013) Refractory brick and profile insulation
AS IEC 62155:2005 Insulators - Ceramic or glass - Hollow pressurized and unpressurized - Voltages greater than 1000 V a.c.
AS 2374.3.0:1982 Power transformers - Insulation levels and dielectric tests - General requirements
AS 2374.3.1:1992 Power transformers - Insulation levels and dielectric tests - External clearances in air
AS/NZS 60702.1:2005 Mineral insulated cables and their terminations with a rated voltage not exceeding 750？V - Cables
AS 4359.1:1996(R2013) Insulating refractory ceramic fiber bulk fiber and felt
AS 4435.1:1996 Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. - Definitions, test methods and acceptance criteria for string insulator units
AS 4435.1:1996(R2016) Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. - Definitions, test methods and acceptance criteria for string insulator units

Society of Automotive Engineers (SAE)

SAE AS81824/3A-2022 SPLICE, COAXIAL CABLE, ELECTRIC, PERMANENT, CRIMP AND SOLDER STYLE COPPER, INSULATED, ENVIRONMENT RESISTANT, 150 °C
SAE AS81824/3-2012 SPLICE, COAXIAL CABLE, ELECTRIC, PERMANENT, CRIMP STYLE COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1
SAE AS85080/5A-2012 Insulation Sleeving, Electrical, Shrinkable Without Heat, Polychloroprene
SAE AS85080A-2012 Insulation Sleeving, Electrical, Shrinkable Without Heat, General Specification for
SAE AS81824A-2009 Splices, Electric, Permanent, Crimp Style, Copper, Insulated, Environment Resistant
SAE AS81824B-2010 Splices, Electric, Permanent, Crimp Style, Copper, Insulated, Environment Resistant
SAE AS81824A_A1-2005 Splices, Electric, Permanent, Crimp Style, Copper, Insulated, Environment Resistant
SAE AS85080/4A-2012 Insulation Sleeving, Electrical, Shrinkable Without Heat, Chlorosulfonated Polyethylene Flexible
SAE AS81824/4A-2022 SPLICES, ELECTRIC, PERMANENT, CRIMP STYLE, COPPER, INSULATED, ENVIRONMENT RESISTANT, SPLICE, SHIELD, SOLDER TYPE, INSULATED, 150 °C
SAE AS81824/4-2012 SPLICES, ELECTRIC, PERMANENT, CRIMP STYLE, COPPER, INSULATED, ENVIRONMENT RESISTANT, SPLICE, SHIELD, SOLDER TYPE, INSULATED, CLASS 1
SAE J1352-1987 COMPRESSION AND RECOVERY OF INSULATION PADDINGS
SAE AS81824/1-2012 SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1
SAE AS5259/4-2022 CRIMPING TOOL AND ACCESSORIES, REMOTE CRIMP HEAD, HYDRAULIC, WIRE SIZE 8 TO 00 UN-INSULATED AND 8 THRU 2 INSULATED CRIMP BARRELS

GSO

GSO ISO 11432:2007 Building construction - Sealants – Determination of resistance to compression
GSO IEC 60660:2014 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
OS GSO IEC 60660:2014 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
GSO IEC 61196-1-105:2014 Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric
DL/T 464.4-1992 Overhead insulated wire fittings and insulating parts for rated voltage 1 kV and below (4) Wedge-type tension clamps
GSO IEC 60588-3:2014 Askarels for transformers and capacitors. Part 3: Specifications for new askarels
OS GSO IEC 60588-3:2014 Askarels for transformers and capacitors. Part 3: Specifications for new askarels
GSO IEC 60588-5:2014 Askarels for transformers and capacitors. Part 5: Screening test for compatibility of materials and transformer askarels
GSO IEC 60588-4:2014 Askarels for transformers and capacitors. Part 4: Guide for maintenance of transformer askarels in equipment
OS GSO IEC 60588-4:2014 Askarels for transformers and capacitors. Part 4: Guide for maintenance of transformer askarels in equipment
OS GSO IEC 60588-5:2014 Askarels for transformers and capacitors. Part 5: Screening test for compatibility of materials and transformer askarels
GSO IEC 61109:2014 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
GSO EN 14367:2022 Non controllable backflow preventer with different pressure zones - Family C, type A
BH GSO EN 14367:2023 Non controllable backflow preventer with different pressure zones - Family C, type A
GSO IEC 60245-3:2007 Rubber Insulated Cables of Rated Voltages Up To and Including 450/750 V – Part 3: Heat-Resistant Silicone Insulated Cables
OS GSO IEC 60245-3:2007 Rubber Insulated Cables of Rated Voltages Up To and Including 450/750 V – Part 3: Heat-Resistant Silicone Insulated Cables
GSO ISO 9047:2007 Building construction -- Jointing products -- Determination of adhesion/cohesion properties of sealants at variable temperature
DL/T 474.6-1992 Guidelines for the implementation of on-site insulation tests - Transformer operating wave induced withstand voltage test
GSO IEC 60832-1:2015 Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks
GSO IEC 60588-6:2014 Askarels for transformers and capacitors. Part 6: Screening test for effects of materials on capacitor askarels

ZA-SANS

SANS 60660:1999 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
SANS 5920:1980 Modulus of rupture at room temperature of dense and insulating refractory bricks

German Institute for Standardization

DIN EN 60660:2000 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV (IEC 60660:1999); German version EN 60660:1999
DIN 46228-2:1992-02 Crimp-type end-splices, with and without insulation grip
DIN 46228-2:1992 Crimp-type end-splices, with and without insulation grip
DIN EN 61109:2009 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria (IEC 61109:2008); German version EN 61109:2008
DIN EN 14367:2005-10 Non controllable backflow preventer with different pressure zones - Family C, type A; German version EN 14367:2005
DIN VDE 0282-15:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber; German version HD 22.15 S2:2007
DIN VDE 0303-5:1990 Testing of electrical insulating materials; low voltage; high current arc resisting test
DIN 89347:2008-02 Washers for glands for electrical cables and insulated wires; Text in German and English
DIN EN 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers (IEC 61558-2-4:

BR-ABNT

ABNT 19-2.1-003-1980 Pressure resistance test of insulating refractory bricks at normal temperature
ABNT NBR NM 287-3-2009 Rubber insulated cables of rated voltages up to and including 450/750 V Part 3- Heat resistant silicone insulated cables (IEC 60245-3 MOD)

SAE - SAE International

SAE AS81824/3-1998 SPLICE@ COAXIAL CABLE@ ELECTRIC@ PERMANENT@ CRIMP STYLE COPPER@ INSULATED@ ENVIRONMENT RESISTANT@ CLASS 1
SAE AS81824A-A1-2005 Splices@ Electric@ Permanent@ Crimp Style@ Copper@ Insulated@ Environment Resistant
SAE AS5259/7A-2017 CRIMPING TOOL AND ACCESSORIES@ DIES@ WIRE SIZE 8 TO 0000 UN-INSULATED AND INSULATED CRIMP BARRELS
SAE AS5259/7-2012 CRIMPING TOOL AND ACCESSORIES@ DIES@ WIRE SIZE 8 TO 0000 UN-INSULATED AND INSULATED CRIMP BARRELS
SAE AS5259/7B-2019 CRIMPING TOOL AND ACCESSORIES@ DIES@ WIRE SIZE 8 TO 0000 UN-INSULATED AND INSULATED CRIMP BARRELS
SAE AS81824/4-2004 SPLICES@ ELECTRIC@ PERMANENT@ CRIMP STYLE@ COPPER@ INSULATED@ ENVIRONMENT RESISTANT@ SPLICE@ SHIELD@ SOLDER TYPE@ INSULATED@ CLASS 1
SAE J1352-2019 Compression and Recovery of Insulation Paddings
SAE J1352-1981 Compression and Recovery of Insulation Paddings
SAE AS5259/4-2012 CRIMPING TOOL AND ACCESSORIES@ REMOTE CRIMP HEAD@ HYDRAULIC@ WIRE SIZE 8 TO 00 UN-INSULATED AND 8 THRU 2 INSULATED CRIMP BARRELS

PL-PKN

PN E92416-1987 High voltage insulators caps wilh clevis for long rod insulators
PN E04063-06-1987 On-Ioad tap changers Test methods Dielectric strength
PN E04442-1989 Solid insulating materials Test for the resistance to tracking at high voltage and inclined specimen
PN E06323-1990 High yoltage insulators Ceramic rod insulators Ultrasonic and texture tests
PN E04410-23-1986 Electroinsulating varnishes Test methods Testing of arc resistance and tracking resistance

British Standards Institution (BSI)

BS EN 60660:2000 Insulators. Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV
BS EN 61251:2016 Electrical insulating materials and systems. A.C. voltage endurance evaluation
BS EN 50363-5:2005+A1:2011 Insulating, sheathing and covering materials for low voltage energy cables. Halogen-free, cross-linked insulating compounds
BS EN 50363-5+A1:2006 Insulating, sheathing and covering materials for low voltage energy cables. Halogen-free, cross-linked insulating compounds
BS EN ISO 8895:2006 Shaped insulating refractory products - Determination of cold crushing strength
BS 6470:1984 Method for determination of water in insulating oils, and in oil-impregnated paper and pressboard
BS 7808:1995 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
BS 7870-3.21:2011(2012) LV and MV polymeric insulated cables for use by distribution and generation utilities Part 3 : Specification for distribution cables of rated voltage 0.6 / 1 kV Section 3.21 : XLPE insulated split concentric cables with copper or aluminium conductors
BS EN 60085:2008 Electrical insulation - Thermal evaluation and designation
BS 7655-1.4:2000 Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Oil resisting types - Oil resisting types
BS EN 60702-2:2002+A1:2015 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations
BS 6207-3:2001 Mineral insulated cables with a rated voltage not exceeding 750 V. Guide to use
BS EN 1094-1:2008 Insulating refractory products - Terminology, classification and methods of test for high temperature insulation wool products
BS EN 61558-2-4:2009 Safety of transformers, reactors,power supply units and similar products for supply voltages up to 1100 V. Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
BS EN 50363-3:2005 Insulating, sheathing and covering materials for low voltage energy cables - PVC insulating compounds
BS DD IEC/TS 61251:2008 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
BS 7870-3.21:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with copper or aluminium conductors
BS EN 50363-3+A1:2006 Insulating, sheathing and covering materials for low voltage energy cables. PVC insulating compounds
BS 7870-3.21:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split concentric cables with copper or aluminium conductors
BS 7870-3.20:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with copper or aluminium conductors
BS EN 50363-3:2005+A1:2011 Insulating, sheathing and covering materials for low voltage energy cables. PVC insulating compounds
24/30488478 DC BS IEC 60245-3 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
BS EN 60216-6:2004 Electrical insulating materials - Thermal endurance properties - Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
BS 3532:1990 Method of specifying unsaturated polyester resin systems
BS 7870-3.50:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, havi
BS EN IEC 60216-6:2022 Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance indices (TI and RTI) of an insulating material using the fixed time frame method
BS 7870-3.50:2005 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, ha
BS 6207-2:1995(1999) Mineral insulated cables with a rated voltage not exceeding 750 V — Part 2 : Terminations
BS EN 60702-1:2002+A1:2015 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Cables
BS 6207-1:1995(1999) Mineral insulated cables with a rated voltage not exceeding 750 V — Part 1 : Cables —
BS EN 60702-2:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations
BS EN 60702-1:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables
BS EN 13763-22:2003 Explosives for civil uses - Detonators and relays - Determination of capacitance, insulation resistance and insulation breakdown of leading wires
BS EN 13763-22:2004 Explosives for civil uses - Detonators and relays - Determination of capacitance, insulation resistance and insulation breakdown of leading wires

Korean Agency for Technology and Standards (KATS)

KS C 2127-1996 Testing method for proof-voltage testing of thin solid electrical insulating materials
KS C 3827-2003 Normal type and anti-pollution type suspension insulators
KS R 9197-1996(2016) Test methods for insulation resistance and withstand voltage of railway rolling stock
KS C IEC 61251:2019 Electrical insulating materials and systems — AC voltage endurance evaluation
KS R 9197-2022 Test methods for insulation resistance and withstand voltage of railway rolling stock
KS R 9197-1996 Test methods for insulation resistance and withstand voltage of railway rolling stock
KS P 8010-2023 Testing method for withstand voltage of personal protective equipment and insulating devices
KS R 9193-2022 Insulation resistance and withstand voltage testing methods of parts for railway signaling
KS C 2105-2003 Testing methods for electric strengthof solid insulating materials
KS C 2127-1996(2021) Testing method for proof-voltage testing of thin solid electrical insulating materials
KS C 2105-1982 Testing methods for electric strengthof solid insulating materials
KS C IEC 60660:2005 Insulators－Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000V up to but not including 300 kV
KS R 9193-1996 Insulation resistance and withstand voltage testing methods of parts for railway signaling
KS R 9193-1996(2016) Insulation resistance and withstand voltage testing methods of parts for railway signaling
KS C 2127-2021 Testing method for proof-voltage testing of thin solid electrical insulating materials
KS C IEC 60245-3-2013(2018) Rubber insulated cables of rated voltages up to and including 450/750 V－Part 3：Heat resistant silicone insulated cables
KS P 8010-2018 Testing method for withstand voltage of personal protective equipment and insulating devices
KS C IEC 60245-3:2013 Rubber insulated cables of rated voltages up to and including 450/750 V－Part 3：Heat resistant silicone insulated cables
KS C IEC 61251:2002 Electrical insulating materials－A.C. voltage endurance evaluation－Introduction
KS C IEC 60245-3-2023 Rubber insulated cables of rated voltages up to and including 450/750 V－Part 3：Heat resistant silicone insulated cables
KS C IEC 60245-3:2005 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 3: Heat resistant silicone insulated cables
KS C IEC 60660:2020 Insulators — Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000V up to but not including 300 kV
KS P 8010-1987 Testing method for withstand voltage of personal protective equipment and insulating devices
KS P 8010-2007 Testing method for withstand voltage of personal protective equipment and insulating devices
KS C 2130-1996(2021) Testing method for high-voltage, low-current, dry arc resistance of solid electrical insulation
KS C IEC 61109-2023 Insulators for overhead lines — Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V — Definitions, test methods and acceptance criteria
KS C IEC 61621:2014 Dry, solid insulating materials — Resistance test to high-voltage, low-current arc discharges

ES-UNE

UNE-EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation (Endorsed by AENOR in April of 2016.)
IEC 60664:2023 SER Insulation coordination for equipment within low-voltage systems - ALL PARTS

Association Francaise de Normalisation

NF C26-351*NF EN 61251:2016 Electrical insulating materials and systeme - A.C. voltage endurance evaluation
NF C32-323:2020 Insulated conductors and cables for installations - Rigid halogen-free cables with cross-linked synthetic insulation and extruded synthetic protective sheath with a voltage of 0.6/1 kV, with improved fire behavior and non-propagation of...
NF C32-102-15:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 15 : multicore cables insulated and sheathed with heat resistant silicone rubber.
NF EN 61251:2016 Electrical insulating systems and materials - Evaluation of endurance to alternating voltage
NF C66-082*NF EN 60660:2000 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but non including 300 kV
NF Q03-041:2007 Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method).
NF Q03-041*NF EN ISO 3037:2013 Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method)
NF C32-102-12:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 12 : heat resistant EPR cords and flexible cables.
NF C32-102-10:1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 10 : EPR insulated and polyurethane sheathed flexible cable.
NF C32-102-15:1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 15 : multicore cables insulated and sheathed with resistant silicone rubber.
NF B40-378:1982 Refractory products - Unshaped materials - Control of the aptitude of gunning for castables dense and insulating
NF C32-102-3/A1:1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 3 : heat resistant silicone rubber insulated cables.
NF C66-309*NF EN 61109:2009 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
NF EN IEC 61462:2023 Hollow composite insulators - Insulators with or without internal pressure for use in electrical equipment with rated alternating voltages greater than 1,000 V and direct voltages greater than 1,500 V - Definitions, me...
NF C32-102-10:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 10 : EPR insulated and polyurethane sheathed flexible cables.
NF C32-102-3:2004 Cables of rated voltages up to and including 450/750 V and having crosslinked insulation - Part 3 : heat resistant silicone rubber insulated cables.
NF C45-202:1999 Electromechanical non-specified time all-or-nothing relays. Part 5 : insulation coordination.
NF C32-301:1995 Mineral insulated cables with a rated voltage not exceeding 750 V. Part 2 : terminations.
NF P43-009*NF EN 14367:2005 Non-controllable backflow preventer with different pressure zones - Family C, type A
NF C66-104:1975 Insulators and fittings for overhead lines. Insulators of ceramic material for voltages lower than 1000 V. High-collar insulators (chc).
NF C66-103:1975 Insulators and fittings for overhead lines. Insulators of ceramic material for voltages lower than 1000 V double-shed insulators with grooved heda (cdc).
NF C32-070/A1:2005 Insulated cables and flexible cords for installations - Classification tests on cables and cords with respect to their behaviour to fire.
NF C66-204:1975 Insulators and fittings for overhead lines. Glass insulators for voltages lower than 1000 V. High-collar insulators (VHC).
NF C66-107:1975 Insulators and fittings for overhead lines. Insulators of ceramic material for voltages lower than 1000 volts. Terminal insulators (ac).
NF C32-220:2000 Insulated cables and flexible cords for installations - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Series of the recognised national type.
NF C32-102-3:1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 3 : heat resistant silicone rubber insulated cables.
NF C66-203:1975 Insulators and fittings for overhead lines. Glass insulators for voltages lower than 1000 V. Double-shed insulators with grooved head (VDC).
NF C66-207:1975 Insulators and fittings for overhead lines. Glass insulators for voltages lower than 1000 V. Terminal insulators (AV).
NF EN 61462:2008 Hollow composite insulators - Insulators with or without internal pressure for use in electrical equipment with nominal voltages greater than 1,000 V - Definitions, test methods, acceptance criteria and recommendations for...
NF C26-307*NF EN 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Part 6 : determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
NF C32-300:1995 Mineral insulated cables with a rated voltage not exceeding 750 volts. Part 1 : cables.

SE-SIS

SIS SS IEC 660:1982 Insulators - Indoor post insulators of organic material for systems with nominal voltages greater than 1000 V up to but not including 300 kV — Tests
SIS 12 32 02-1960 Angle steel with different edges, aluminum and aluminum alloys
SIS SS 404 03 26-1987 Insulating oils — Specification for unused mineral insulating oils for transformers and switchgear
SIS SS 404 03 26-1986 Insulating oils — Specification for unused mineral insulating oils for transformers and switchgear

International Organization for Standardization (ISO)

ISO 1927:1975 Refractory products — Classification of prepared unshaped refractory materials (dense and insulating)

BE-NBN

NBN 28-1947 Particulars relating to insulators with double bells for use in low and medium voltage power networks
NBN C 32-124 ADD 2-1984 Installation insulated wires and cables, state-owned type polyvinyl chloride insulated cables and conductors, nominal voltage Uo/U below
NBN C 32-132 ADD 3-1995 Installation insulated wires and cables, rubber insulated cables and conductors, nominal voltage Uo/U between 600/1000 V, state-owned type
NBN C 32-124 ADD 8-1995 Installation insulated wires and cables, state-owned type polyvinyl chloride insulated cables and conductors, nominal voltage Uo/U between 600/1000 V
NBN C 32-124 ADD 7-1995 Installation insulated wires and cables, state-owned type polyvinyl chloride insulated cables and conductors, nominal voltage Uo/U between 600/1000 V
NBN C 33-222 ADD 1-1974 Energy transmission cable, underground cable, using aluminum conductors, synthetic insulation and with an uninsulated neutral conductor (type: 1 kV)
NBN C 32-124 ADD 6-1995 Installation insulated wires and cables, state-owned type polyvinyl chloride insulated cables and conductors, nominal voltage Uo/U between 600/1000 V
NBN C 33-222-1974 Energy transmission cable, underground cable, using aluminum conductors, synthetic insulation and with an uninsulated neutral conductor (type: 1 kV)
NBN-HD 022.3-1993 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 3: Heat resistant silicone rubber insulated cables

International Electrotechnical Commission (IEC)

IEC 61251:2015 Electrical insulating materials and systems - AC voltage endurance evaluation
IEC 60660:1999 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1000 V up to but not including 300 kV
IEC 60245-3:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
IEC TS 61251:2008 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
IEC 60664:2024 SER Insulation coordination for equipment within low-voltage systems - ALL PARTS
IEC 60245-3:1980 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 3 : Heat resistant silicone rubber insulated cables
IEC 60664:2022 Insulation coordination for equipment within low-voltage systems - ALL PARTS
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
IEC 61109:2008 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria
IEC 60660:1979 Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1000 V up to but not including 300 kV
IEC 60245-3:1994/AMD1:1997 Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
IEC 60085:1984 Thermal evaluation and classification of electrical insulation
IEC TR2 61251:1993 Electrical insulating materials; A.C. voltage endurance evaluation; introduction
IEC 60702-1:1988 Mineral insulated cables with a rated voltage not exceding 750 V; part 1: cables

American National Standards Institute （ANSI)

ANSI/EIA 364-21D:2008 Insulation Resistance Test Procedure for Electrical Connectors, sockets and Coaxial Contacts
ANSI/IEEE 930:2005 Electrical Insulation Voltage Endurance Data, Guide for the Statistical Analysis of
ANSI/ASTM D3005:2010 Specification for Low-Temperature-Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ANSI C29.5-1984 Wet-Process Porcelain Insulators, Low- and Medium-Voltage Pin Type
ANSI C119.5-2009 Insulation Piercing Connector Systems, rated 600 volts or less (low voltage aerial bundled cables and insulated and non-insulated line wires)
ANSI C119.5-2018 Insulation Piercing Connector Systems, rated 600 volts or less (low voltage aerial bundled cables and insulated and non-insulated line wires)

KR-KS

KS C IEC 61251-2019 Electrical insulating materials and systems — AC voltage endurance evaluation
KS R 9197-1996(2016)(英文版) Test methods for insulation resistance and withstand voltage of railway rolling stock
KS P 8010-2018(2023) Testing method for withstand voltage of personal protective equipment and insulating devices
KS C IEC 60245-3-2013(2023) Rubber insulated cables of rated voltages up to and including 450/750 V－Part 3：Heat resistant silicone insulated cables
KS C IEC 60660-2020 Insulators — Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000V up to but not including 300 kV

CZ-CSN

CSN 34 7470-15-2000 Rubber insulated cables of rated voltages up to and Including 450/750 V - Part 15: Multicore cable insulated and sheathed with heat resistant silicone rubber
CSN 34 6471-1986 Test methods for electric insulating materials. Test method for determination of resistance insulating materials to high-voltage arc
CSN 34 7470-3-1997 Rubber insulated cable of rated voltages up to and including 450/750 V Part 3: Heat resistant silicone rubber insulated cables
CSN 34 8117-1982 Ceramic insulators. Long rod insulators with external fittings. Elementary dimensions and characteristics
CSN 34 8118-1982 Ceramic insulators. Long rod insulators with external fittings. Elementary dimensions and characteristics
CSN 34 7659-3H-1997 Distribution cables of rated voltage 0,6/1 kV -Section 3H: Cables with (type 3H-1) and without (type 3H-2) concentric conductor with PVC insulation and PVC sheath
CSN 35 4185-1982 Electrical apparatus for mines. Insulation indicators for 1200 V electric network with insulated neutral

AT-ON

OVE/ONORM E 8240-15-2000 Rubber insulated cables of rated voltage up to and including 450/750 V - Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber

AENOR

UNE-EN 60660:2001 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV.
UNE-EN 14367:2006 Non controllable backflow preventer with different pressure zones - Family C, type A.
UNE-EN 50525-3-31:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 3-31: Cables with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke
UNE-EN 50525-2-51:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) -- Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation

IEC - International Electrotechnical Commission

IEC 60245-7:1994 Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 7: Heat Resistant Ethylene-Vinyl Acetate Rubber Insulated Cables (Edition 1.0)
TS 61251-2008 Electrical insulating materials – A.C. voltage endurance evaluation – Introduction (Edition 2.0)
TS 61251-1993 Electrical Insulating Materials - A.C. Voltage Endurance Evaluation - Introduction (Edition 1.0)

Danish Standards Foundation

DS/EN 60660:2001 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV
DS/EN 14367:2005 Non controllable backflow preventer with different pressure zones - Familiy C, type A
DS/EN 50525-3-31:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-31: Cables with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke
DS/IEC 85:1986 Thermal evaluation and classification of electrical insulation
DS/EN 50525-2-51:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation
DS/IEC 684-3-400/402:1993 Specification for flexible insulating sleeving. Part 3: Specification requirements for individual types of sleeving. Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating

RU-GOST R

GOST 15634.4-1970 Magnet wire. Methods of the breakdown voltage test
GOST R IEC 60245-3-1997 Rubber insulated cables of rated voltages to 450/750 V including. Heat resistant silicone insulated cables
GOST IEC 60245-3-2011 Rubber insulated cables of rated voltages to 450/750 V including. Heat resistant silicone insulated cables
GOST 26130-1984 Electrical insulating paper. Methods for determination of electrical strength at alternating (frequency of 50 Hz) and constant voltage
GOST R IEC 60245-7-1997 Rubber insulated cables of rated voltages to 450/750 V including. Heat-resistant ethylene-vinyl acetate rubber insulated cables
GOST 12268-1979 Electrical insulating board. Methods for determination of test voltage resistance, surface discharge resistance and compressibility under pressure

ESDU - Engineering Sciences Data Unit

STRUCT 02.01.02 A-1977 Average and edge stresses for long flat plates in compression for different edge conditions.
STRUCT 02.01.23 A-1977 Average and edge stresses in long flat rectangular plates in compression under varying edge conditions.

ICEA - Insulated Cable Engineers Association Inc.

P-47-434-1965 Pressurization Characteristics of Polyethylene-Insulated and - Jacketed Telephone Cables

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 930-1987 Guide for the Statistical Analysis of Electrical Insulation Voltage Endurance Data

RO-ASRO

STAS 128/2-1981 Refractory products DIFFERFNTIAL DETFRMINATION OF COMPRESSION DEFORMATION TEMPERATFRE
STAS 811-1983 Electrical insulating oils ELECTRIC TRANSFORMER AND CIRCUIT BREAKER FREE OF ADDITIVE COMPOUND OIL Tr 30
STAS 1785/2-1980 Indoor post insulators made, of porcelain, for electrical engineering purposes, with outer metal fittings INSULATORS WITHOUT FITTINGS

Lithuanian Standards Office

LST EN 60660-2001 Insulators. Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV (IEC 60660:1999)
LST EN 14367-2006 Non controllable backflow preventer with different pressure zones - Family C, type A
LST EN 50525-2-51-2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) -- Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation

HU-MSZT

MSZ 14550/3-1980 Heat resistance of permissible load conductors, silicone insulated cables
MSZ 263/6-1983 High voltage porcelain insulator insulated hollow structure, technical requirements and testing

ES-AENOR

UNE 21-157-1986 Inorganic insulated cables with rated voltage not exceeding 750V
UNE 21-320 Pt.31-1985 New insulating liquid based on carbohydrates different from mineral oil in transformers and circuit breakers, used in capacitors and cables
UNE 21-706-1990 Insulating tube filled with insulating foam and solid rod for low voltage operation
UNE 21 112 Ceramic insulators for overhead wiring with a voltage not exceeding 1000V. General characteristics
UNE 21 111 Ceramic insulators for overhead wiring with a voltage not exceeding 1000V. General characteristics

Institute of Electrical and Electronics Engineers (IEEE)

ANSI/IEEE Std 930-1987 IEEE Guide for the Statistical Analysis of Electrical Insulation Voltage Endurance Data

GB-REG

REG NACA-TR-539-1936 Investigation of full-scale split trailing-edge wing flaps with various chords and hinge locations

American Society for Testing and Materials (ASTM)

ASTM D3005-99(2004) Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3005-17 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D1389-97a(2004) Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D3005-24 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3005-99 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3005-10 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

YU-JUS

JUS N.S5.607-1985 Die/ectric strength tests ofultrasonlc medlcal dlagnostfc eguipment
JUS N.H1.013-1985 Power transformers. Insulation levek and dielectric tests
JUS N.H1.113-1990 Power transformers. Insulation levels and dielectric tescs. Extemal clearances in air

TH-TISI

TIS 955.3-2008 Rubber insulated cables.rated voltages up to and including 450/750 v.part 3: heat resistant silicone insulated cables

IL-SII

S.I.735-1970 THERMOPLASTIC INSULATED CABLES FOR VOLTAGES EXCEEDING 1000 VOLTS BETWEEN PHASES
S.I.547-1965 RUBBER OR PLASTIC INSULATED UNDER-GROUND CABLES FOR VOLTAGE NOT EX- CEEDING 1000 VOLTS

VN-TCVN

TCVN 6306-3-2006 Power transformers.Part 3: Insulation levels and dielectric tests and external clearances in air

Indonesia Standards

SNI IEC 60245-3:2012 Rubber insulated cables – Rated voltages up to and including 450/750 V. Part 3: Heat resistant silicone insulated cables

Insulated Cable Engineers Association （ICEA)

ICEA P-47-434-1965 Pressurization Characteristics of Polyethylene-Insulated and - Jacketed Telephone Cables

United States Navy

NAVY MIL-I-24718 (1)-1993 INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING; GENERAL SPECIFICATION FOR
NAVY MIL-I-24718-1990 INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING; GENERAL SPECIFICATION FOR

CENELEC - European Committee for Electrotechnical Standardization

HD 22.3 S2-1983 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 3: Heat Resistant Silicone Rubber Insulated Cables
HD 22.3 S2/ A1-1990 AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 3: Heat Resistant Silicone Rubber Insulated Cables

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE TO-98-25-2-1998 Insulation Failure and Moisture Problems Resulting from Inadequate Installation of Insulation and/or Vapor Retarders
ASHRAE 3964-1996 Simultaneous Heat and Moisture Transfer in Fiberglass Insulation with Transient Boundary Conditions

National Electrical Manufacturers Association（NEMA)

NEMA C29.5-2015 Wet-Process Porcelain Insulators - Low- and Medium-Voltage Types

European Committee for Standardization (CEN)

EN ISO 8895:2006 Shaped insulating refractory products - Determination of cold crushing strength (ISO 8895:2004)
prHD 586.1 S1-1993 Mineral insulated cables with a rated voltage not exceeding 750 V; part 1: cables

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0303-251-2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation (IEC 61251:2015); German version EN 61251:2016

IN-BIS

IS 1596-1977 Specification for polyethylene insulated cables with operating voltage not exceeding 1100 volts
IS 694-1977 Specification for polyvinyl chloride insulated cables with operating voltage not exceeding 1100 volts

CH-SNV

SN 235 385-1978 Grundlage dieser Norm ist die von der Internationalen Organi-sation für Normung, ISO, herausgegebene Empfehlung ISO/R 603 ■ 1967.
SN 742 400-1984 Road vehiclesTyres and rims - Technical data

GOST

GOST 8865-1970 Electrical insulating materials for electrical machines, transformers and devices. Classification by heat resistance

FI-SFS

SFS 5522-1989 The rated voltage of PVC-coated insulated cables does not exceed 450/750V. Test Methods
SFS 5521-1989 The rated voltage of PVC-coated insulated cables does not exceed 450/750V. total requirements
SFS 5525-1989 The rated voltage of PVC-coated insulated cables does not exceed 450/750V. flexible cable

NEMA - National Electrical Manufacturers Association

NEMA C119.5-2018 Electric Connectors - Insulation Piercing Connector Systems@ Rated 600 Volts or Less (Low - Voltage Aerial Bundled Cables and Insulated and Non-Insulated Line Wires)

GOSTR

GOST IEC 60245-7-2011 Rubber insulated cables of rated voltages to 450/750 v including. Heat-resistant ethylene-vinyl acetate rubber insulated cables

(U.S.) Ford Automotive Standards

FORD SJ-M99D9720-A-2007 INSULATING TUBE, HEAT RESISTANT***TO BE USED WITH FORD WSS-M99P1111-A***

Others: