Ionization detection

Ionization detection, Total:68 items.

The international standard classification for "Ionization detection" includes: Other standards related to optics and optical measurements , Cement. Gypsum. Lime. Mortar .

The Chinese standard classification for "Ionization detection" includes: Fuel oil , chromatograph , Optical Measurement , Cement .

Professional Standard - Commodity Inspection

SN/T 3695.1-2014 Determination of mirex in electrical and electronic products - Part 1: Gas chromatography - Method by flame ionization detector

Professional Standard - Petrochemical Industry

SH/T 1844-2024 Ethylene and propylene for industrial use – Determination ofhydrogen, carbon monoxide and carbon dioxide – Gas chromatography and helium ionization method
SH/T 0720-2002 Standard test method for determination of oxygenates in gasoline by gas chromatography and oxygen selective flame ionization detection

Professional Standard - Machinery

JB/T 9361-1999 Test method for flame ionization detector of gas chromatography

Beijing Provincial Standard of the People's Republic of China

DB11/T 1367-2016 Determination of methane/total hydrocarbons/non-methane total hydrocarbons in exhaust gas from stationary pollution sources Portable hydrogen flame ionization detector method

National Metrological Technical Specifications of the People's Republic of China

JJF 1172-2007 Calibration Specification for Volatile Organic Compounds Photo Ionization Detectors

Shandong Provincial Standard of the People's Republic of China

DB37/T 4078-2020 Continuous monitoring of volatile organic compounds in ambient air by gas chromatography-hydrogen flame ionization detector/mass spectrometry detector

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32193-2015 Standard practice for testing flame ionization detectors used in gas or supercritical fluid chromatography
GB/T 43872-2024 Test methods for determining the immobilization ratio of chloride in cement

Group Standards of the People's Republic of China

T/ACEF 096-2023 Technical requirements and monitoring specifications of portable photoionization detector (PID)for volatile organic compounds
T/CIESC 0021-2022 Standard Test Method for Permanent Gases in Polymer Grade Ethylene and Propylene by Gas Chromatography and Helium Ionization Detector

Fujian Provincial Standard of the People's Republic of China

DB35/T 1913-2020 Determination of non-methane total hydrocarbons in exhaust gas from stationary pollution sources Portable catalytic oxidation-hydrogen flame ionization detector method

SCC

VDI 3483 BLATT 1-1979 Measuring gaseous emissions; measuring the sum of organic substances with a flame ionization detector (FID); basics
VDI 2459 BLATT 1-2000 Measuring gaseous emissions — Measuring carbon monoxide concentration using a flame ionization detector after reduction to methane
VDI 3481 BLATT 4-2007 Measuring gaseous emissions — Measuring the concentrations of total C and methane C using the flame ionization detector (FID)
VDI 2459 BLATT 1-2000 Measuring gaseous emissions — Measuring carbon monoxide concentration using a flame ionization detector after reduction to methane
VDI 3483 BLATT 1-1979 Measuring gaseous emissions; measuring the sum of organic substances with a flame ionization detector (FID); basics
VDI 3481 BLATT 4-2007 Measuring gaseous emissions — Measuring the concentrations of total C and methane C using the flame ionization detector (FID)
VDI 3481 BLATT 3-1995 Measuring gaseous emissions — Measuring volatile organic compounds, especially solvents, using the flame ionization detector (FID)
DANSK DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
VDI 3481 BLATT 3-1995 Measuring gaseous emissions — Measuring volatile organic compounds, especially solvents, using the flame ionization detector (FID)
NS-EN ISO 25140:2010 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
DANSK DS/EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
NS-EN 12619:2013 Stationary source emissions — Determination of the mass concentration of total gaseous organic carbon — Continuous flame ionisation detector method
08/30142566 DC BS EN ISO 25140. Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
11/30238654 DC BS EN 12619. Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon. Continuous flame ionisation detector method

VDI - Verein Deutscher Ingenieure

VDI 3481 Blatt 1-1975 Messung gasfoermiger Emissionen; Messen der Kohlenwasserstoff-Konzentration; Flammen-Ionisations-Detektor (FID)
VDI 2466 Blatt 2-2007 Messen gasfoermiger Emissionen - Messen von Methan - Automatisches Verfahren - Flammenionisationsdetektor (FID)
VDI 3481 Blatt 4-2004 Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID)

Association of German Mechanical Engineers

VDI 2466 Blatt 2-2008 Gaseous emission measurement - Measurement of methane - Automatic method - Flame ionisation detector (FID)
VDI 3860 Blatt 3-2011 Measurement of landfill gas - Measurement of surface emissions using the flame ionisation detector (FID)

UNKNOWN

GB 20077663-T-604 Flame ionization detector test method for gas chromatography/supercritical fluid chromatography

Association Francaise de Normalisation

NF EN ISO 25140:2010 Emissions from stationary sources - Automatic method for the determination of methane concentration by flame ionization detection (FID)
NF EN 12619:2013 Emissions from stationary sources - Determination of total organic carbon mass concentration - Continuous flame ionization detector method
NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).
NF T90-124:2019 Water quality - Determination of the volatile hydrocarbon index - Head-space gas chromatographic method with flame ionisation detector

Korean Agency for Technology and Standards (KATS)

KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 14965:2017 Air quality－Determination of total non-methane organic compounds－Cryogenic preconcentration and direct flame ionization detection method
KS I ISO 14965:2007 Air quality－Determination of total non-methane organic compounds－Cryogenic preconcentration and direct flame ionization detection method
KS I ISO 14965:2022 Air quality — Determination of total non-methane organic compounds — Cryogenic preconcentration and direct flame ionization detection method

RU-GOST R

GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
GOST R 56867-2016 Hydrocarbons C2-C5. Determination of oxygenates by gas chromatography using a flame ionization detector
GOST 33900-2016 Gasoline. Determination of oxygenates content by gas chromatography method with oxygen selective flame ionization detection

KR-KS

KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 14965-2017 Air quality－Determination of total non-methane organic compounds－Cryogenic preconcentration and direct flame ionization detection method
KS I ISO 14965-2022 Air quality — Determination of total non-methane organic compounds — Cryogenic preconcentration and direct flame ionization detection method

US-CFR-file

CFR 40-1065.260-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.260:Flame-ionization detector.
CFR 40-1065.267-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.267:Gas chromatograph with a flame ionization detector.

Danish Standards Foundation

DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
DS/EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method

British Standards Institution (BSI)

BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)

American Society for Testing and Materials (ASTM)

ASTM E594-96(2019) Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
ASTM E594-96 Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
ASTM UOP990-11 Organic Analysis of Distillate by Comprehensive Two-Dimensional Gas Chromatography with Flame Ionization Detection
ASTM D5599-17 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM RR-D02-1340 1994 D5599-Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM RR-D02-1359 1995 D5599-Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D5599-18 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection

International Organization for Standardization (ISO)

ISO 14965:2000 Air quality - Determination of total non-methane organic compounds - Cryogenic preconcentration and direct flame ionization detection method

Spanish Association for Standardization (UNE)

UNE-EN ISO 25140:2011 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
UNE-EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
UNE 77251:2003 Air quality -- Determination of total non-methane organic compounds -- Cryogenic preconcentration and direct flame ionization detection method.

German Institute for Standardization

DIN EN 12619:2013-04 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013
DIN EN ISO 25140:2010-12 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010); German version EN ISO 25140:2010
DIN EN 12619:1999 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method

Lithuanian Standards Office

LST EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)

Universal Oil Products Company (UOP)

UOP 990-2011 Organic Analysis of Distillate by Comprehensive Two-Dimensional Gas Chromatography with Flame Ionization Detection