National standard cross stretch size
National standard cross stretch size, Total:69 items.
The international standard classification for "National standard cross stretch size" includes: Textile machinery , Springs , Welded joints .
The Chinese standard classification for "National standard cross stretch size" includes: Textile machinery and apparatus in general , Spring , Welding and cutting .
Professional Standard - Textile
- FZ/T 90104-1999 Bottom fluted rollers for drafting systems. Dimensions
Group Standards of the People's Republic of China
- T/CSTM 00790.4-2022 Steel sheet for automobile -Part4: Cruciform test pieces for biaxial tensile testing
未注明发布机构
- DIN EN ISO 14323 E:2013-02 Destructive testing of resistance welding, effects of resistance spot welding and embossed projection welding, specimen dimensions and procedures for tensile shear testing and cross tensile testing (draft)
- DIN ISO 16237 E:2013-12 Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for cross-tension testing of single joints
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 1973.2-2005 Small cylindrically coiled tension spring - Dimensions and parameters
- GB/T 43925-2024 Test method for full-scale tensile stress corrosion testing of casing and tubing
- GB/T 2088-2009 Cylindrical coiled tension spring dimensions and parameters
- GB/T 4142-2001 Cylindrically coiled tension spring dimensions and parameters (Ring profile with hook)
- GB/T 1973.2-1989 Small cylindrically coiled tension spring; Dimensions and parameters
- GB/T 2087-2001 Ordinary cylindrical helical extension springs(ends with semi-circular hooks) ; Dimensions
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 39081-2020 Test method of cross tension test for resistance spot and embossed projection welds
Professional Standard - Machinery
- JB/T 7341-1994 Journal cross assembly of universal coupling series SWC
Association Francaise de Normalisation
- NF A89-569:2001 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds.
- NF A89-572*NF EN ISO 14323:2015 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
- NF EN ISO 14272:2016 Resistance welding - Destructive testing of welds - Dimensions of specimens and procedure for the cross tensile test of resistance spot and boss welds
RU-GOST R
- GOST 18794-1980 Tension springs. Design and dimensions
- GOST 19715-1974 Red Cross emblem. Form, dimensions and application rules
- GOST 19857-1974 Rectangular plates for sheet stamping cupping dies (blanks). Construction and dimensions
IN-BIS
- IS 7478-1985 Cross recess size
RO-ASRO
- STAS 8452-1969 Finished leather. Dual Dimensional Tensile Test
- STAS 10563-1976 CYLINDRICAL TUBES FOR DRAW-TWISTERS Main dimensions
- STAS 7545-1983 Screw cross nail slot. size
- STAS 480-1984 Malleable east iron pipe fittings CROSSES Dimensions
- STAS 7546/3-1977 Locksmith's tools SCREWDRIVES FOR SCREW W1TU CROSS RECESS Dimensions
- STAS 11667-1986 General use rubber belt conveyers STRETCHING ENDS WITH SCREW Main dimensions
HU-MSZT
- MNOSZ 4345-1952 Stretched barbed steel. Style size
- MSZ 2068-1976 Cross-shaped groove. surface size
- MSZ KGST 1786-1979 Main dimensions of tapered tool cross teeth
- MSZ 2067-1985 Available dimensions of drawn ring steel for nut production
Korean Agency for Technology and Standards (KATS)
- KS B ISO 1651:2013 Hardmetal(carbide) core tube drawing plugs－Dimension
- KS B ISO 1651:2012 Industrial automation systems and integration - Product data representation and exchange - Part 1651: Application module: Basic curve
- KS B 7937-2003 Dimensions of journal cross-assembly for PTO drive shafts of agricultural tractors
- KS B 7937-2003(2013) Dimensions of journal cross-assembly for PTO drive shafts of agricultural tractors
- KS C ISO 14272:2001 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
- KS C ISO 14272:2013 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
U.S. Military Regulations and Norms
- ARMY MIL-P-1577 D-1976 MILITARY SPECIFICATION PANEL MARKER, RED CROSS, 8 FEET, 6 INCHES BY 19 FEET, 6 INCHES
- ARMY MIL-P-1577 D NOTICE 3-1995 PANEL MARKER, RED CROSS, 8 FEET, 6 INCHES BY 19 FEET, 6 INCHES
- ARMY MIL-P-1577 D NOTICE 5-2001 PANEL MARKER, RED CROSS, 8 FEET, 6 INCHES BY 19 FEET, 6 INCHES
- ARMY MIL-P-1577 D VALID NOTICE 4-2000 PANEL MARKER, RED CROSS, 8 FEET, 6 INCHES BY 19 FEET, 6 INCHES
YU-JUS
- JUS U.S4.202-1989 Road signs. Narrow latin letters and numbersfor road signs. Shape and sizes
SE-SIS
- SIS SMS 1676-1964 Phillips screws. Size and control
British Standards Institution (BSI)
- BS ISO 16237:2015 Mechanical joining. Destructive testing of joints. Specimen dimensions and test procedure for cross-tension testing of single joints
International Organization for Standardization (ISO)
- ISO 16237:2015 Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for cross-tension testing of single joints
CZ-CSN
- CSN 22 7523-1975 Sintered carbide drawing dies for dry drawing of steel wires with strength above 1 100 mpa (1100 N/mm-2). Dimensions
- CSN 15 3153-1963 Knitted wire netting with meshes square in shape and with stretching wire. Dimensions
- CSN 22 7572-1975 Hardmetal drawing dies of square bars of aluminium and aluminium alloys.Dimensions
European Committee for Standardization (CEN)
- EN ISO 14323:2015 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
German Institute for Standardization
- DIN EN ISO 14272:2002 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2000); German version EN ISO 14272:2001
- DIN ISO 16237:2015 Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for cross-tension testing of single joints (ISO 16237:2015)
- DIN EN ISO 14323:2015 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds (ISO 14323:2015); German version EN ISO 14323:2015
AIA/NAS - Aerospace Industries Association of America Inc.
- NASM9006-1998 Recess-Cross@ Low Torque Drive@ Dimensions and Gage Dimensions for
- NAS1402-1406-1983 Screw@ Machine@ Aircraft@ Pan Head@ Phillips Recess@ 160@000 psi Tensile (Rev 5)
- NAS1801-1977 SCREW@ HEX HEAD@ PHILLIPS RECESS@ FULL THREAD@ ALLOY STEEL@ 160@000 PSI TENSILE
- NAS7100-1994 Recess@ Cruciform@ Cruciform-Ribbed@ Dimensions of Recess and Gages (Rev 3)
SCC
- MIL MIL-P-1577D-1976 PANEL MARKER, RED CROSS, 8 FEET, 6 INCHES BY 19 FEET, 6 INCHES (SUPERSEDING MIL-P-1577C)
American Society for Testing and Materials (ASTM)
- ASTM A764-07(2021) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
- ASTM C1683-08 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
- ASTM C1683-10(2019) Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
- ASTM C1683-10(2015) Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
- ASTM D3657-03 Standard Specification for Zipper Dimensions
- ASTM D3657-88(1998)e1 Standard Specification for Zipper Dimensions
- ASTM D3657-03(2014) Standard Specification for Zipper Dimensions
- ASTM D3657-03(2021) Standard Specification for Zipper Dimensions
- ASTM D3657-03(2009) Standard Specification for Zipper Dimensions
IT-UNI
- UNI 7596-1976 Pz type cross pattern (Pozidriv)*. Basic screw dimensions
- UNI 6957-1976 Ph type (Phillips) cross pattern screws. basic size
Aerospace Industries Association
- AIA NASM9006-1998 Recess-Cross, Low Torque Drive, Dimensions and Gage Dimensions for FSC 5305
Aerospace Industries Association/ANSI Aerospace Standards
- AIA/NAS NASM33781-2001 Recess - Offset Cruciform, Dimensions of Recess, Gage and Driver for Rev 2
ES-UNE
- ESPECIFICACION UNE 0074:2023 Plastic materials. Shear test method by means of tension-compression on cruciform specimen
