Temperature measurement ring temperature comparison table

Temperature measurement ring temperature comparison table, Total:491 items.

The international standard classification for "Temperature measurement ring temperature comparison table" includes: audio, video and audiovisual engineering , Metrology and measurement in general , Reinforced plastics , Leather and furs , Welding, brazing and soldering in general , Safety of machinery , Temperature-measuring instruments , Water quality , Extraction and processing of petroleum and natural gas .

The Chinese standard classification for "Temperature measurement ring temperature comparison table" includes: Thermal Measurement , Broadcasting, movie and television engineering , Display recording instrument , Architectural engineering construction machinery , Industrial automation and control device in general , Temperature and pressure instrument , Instruments and test devices for vehicle , Fibre reinforced composites , Furs and leathers , Welding and cutting , Hygiene, safety and labor protection , Meteorological instrument , Analysis methods for toxic substances in water , Petroleum extraction .

National Metrological Technical Specifications of the People's Republic of China

JJF(冀) 3003-2018 Calibration Specifications for Paired Temperature Sensors of Heat Meters
JJF 1409-2013 Calibration Specification for the Surface Thermometers
JJF(京) 3003-2018 Calibration Specifications for Paired Temperature Sensors of Heat Meters
JJF(津)3003-2018 Calibration Specification for Temperature Sensor Pair of Heat Meters
JJF(冀)3003-2018 Calibration Specification for Temperature Sensor Pair of Heat Meters
JJF(津) 3003-2018 Calibration Specifications for Paired Temperature Sensors of Heat Meters
JJF(京)3003-2018 Calibration Specification for Temperature Sensor Pair of Heat Meters

未注明发布机构

JEDEC JESD22-A104F.01-2023 Temperature Cycling
AMPP Paper 18127-2022 Examination of a Ferritic-Martensitic Steel following Irradiation and High Temperature Water Corrosion
JEDEC JESD22-A105D-2020 POWER AND TEMPERATURE CYCLING TEST METHOD
AGFW FW 212 M:2003-01 Calibration points for heat meter components according to DIN EN 1434 and the formation of temperature sensor pairs
AGFW FW 202 A:2000-05 Implementation and installation of thermostats to measure hot surface temperatures

Group Standards of the People's Republic of China

T/HBEACA 004-2023 Fuel cell system startup test method based on ambient temperature and coolant temperature
T/JLA 005-2023 Performance evaluation method for the surface temperature source
T/GDAQI 102-2023 Infrared devices of human skin temperature for instant screening
T/CSTM 00989-2023 Test method for microwave parameters under high temperature, low temperature, temperature cycling and humidity
T/CCIAA 15-2021 Technical code for coke oven roof surface temperature determination
T/QAS 024-2021 Determination of brine temperature by thermometer method

Taiwan Provincial Standard of the People's Republic of China

CNS 10405-1983 Degree Fahrenheit-Degree Celcius Conversion Tables

National Metrological Verification Regulations of the People's Republic of China

JJG 364-1994 Surface Themometer
JJG 288-2024 Verification procedures for inverted thermometers
JJG 288-1982 Verification Regulation of Deep Sea Reversing Thermometer
JJG 288-2005 Verification Regulation of Deep Sea Reversing Thermometers

Professional Standard - Ocean

HY/T 007-1992 Reversing thermometer

Professional Standard - Aerospace

QJ 2051-1991 Specifications for transient temperature measurement of structural surfaces in thermal radiation environments

Professional Standard - Radio Television Film

GYJ 43-1990 Indoor environmental requirements for technical rooms at broadcast and television centers

Professional Standard - Machinery

JB/T 7386.1-1994 Industrial Automation Instrument Terms The Temperature Instrument?
JB/T 9266-1999 Temperature measuring range of indicating instruments and recording instruments
JB/T 13702.1-2019 Environmental testing for cameras. Part1:High-temperature and low-temperature test method
JB/T 7696.3-1995 Temperature Gauge for Engineering Machinery
JB/T 12902-2016 Earth-moving machinery.Temperature meter
JB/T 9233.6-1999 General methods of testing the performance of industrial process measurement and control instruments Ambient temperature effect

Hebei Provincial Standard of the People's Republic of China

DB13/T 1702-2013 Digital display temperature and humidity meter test method

Professional Standard - Automobile

QC/T 13-1992 Automobile thermometer

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 18591-2001 Welding - Guidance on the masurement of preheating temperature, interpass temperature and preheat maintenance temperature
GB/T 22888-2021 Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings
GB/T 39682-2020 Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method
GB/T 8747-1988 Meteorological liquid-in-glass thermometer
GB/T 13195-1991 Water quality--Determination of water temperature--Thermometer or reversing thermometer method
GB/T 18153-2000 Safety of machinery--Temperatures of touchable surfaces--Ergonomics data to establish temperature limit values for hot surfaces
GB/T 22888-2008 Leather—Physical and mechanical tests—Determination of cold crack temperature of surface coatings

Guizhou Provincial Standard of the People's Republic of China

DB52/T 1373-2018 Polar Orbiting Satellite Remote Sensing to Monitor Surface Temperature
DB52/T 538-2008 Calibration Specifications for Temperature and Humidity Meters

Professional Standard - Meteorology

QX/T 91-2008 Observation methods of indoor microclimate. air temperature, relative humidity and indoor-outdoor-air temperature difference

Ministry of Ecology and Environment of the People's Replublic of China

GB 13195-1991 Water quality-Determination of water temperature-Thermometer or reversing thermometer method

Professional Standard-Ships

CB 1171.4-1987 Environmental measurement method for ship equipment temperature and humidity

Professional Standard - Petroleum

SY/T 5825-2007 Procedures of temperature test by a electronic down-hole thermometer
SY/T 5825-2014 Procedures of temperature test with down-hole electronic thermometers
SY/T 5825-1993 Mechanical downhole thermometer temperature test

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3133-2019 Test method for surface temperature of ceramic utensils for daily use

Military Standard of the People's Republic of China-General Armament Department

GJB 1172.11-1991 Military equipment climate extreme surface temperature, frozen soil depth and freeze-thaw cycle days

Korean Agency for Technology and Standards (KATS)

KS W 0935-2018 Aerospace — Nuts, hexagonal, slotted(castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa(at ambient temperature)/120 ℃, 600 MPa(at ambient temperature)/ 235 ℃,
KS W ISO 9618:2007 Aerospace－Nuts, hexagonal, slotted(castellated), reduced height,normal across flats, with MJ threads, classifications：450 MPa (at ambient temperature)/120 ℃,450 MPa (at ambient temperature)/235 ℃,600 MPa (at ambient temperature)/425 ℃,900 MPa (at ambient
KS W ISO 9199-2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS W ISO 9199:2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS C IEC PAS 62178-2003(2008) Temperature cycling
KS C IEC PAS 62178-2013 Temperature cycling
KS R 5026-1983 Temperature indicators for automobiles
KS R 5026-2008 Temperature indicators for automobiles
KS C 0076-1990 Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
KS B 5302-1983 Etched-stem liquid-in glass thermometer
KS W ISO 12273-2016 Aerospace－Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃－Dimensions
KS C IEC 60068-2-39-2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS C IEC 60068-2-39:2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS C IEC 60068-2-39-2023 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS D 0411-2012(2022) Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting
KS B ISO 13916-2013 Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS A 0514-2020 Method of temperature measurement by filled-system thermometers and bimetaillic thermometers
KS A 0514-2005(2020) Method of temperature measurement by filled-system thermometers and bimetaillic thermometers
KS B ISO 13916-2003(2008) Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS V 8012-1977(2010) General rules on the temperature test of electric lighting fittings (incandescent lamps) for marine use
KS C IEC 60891-2012(2022) Photovoltaic devices－Procedures for temperature and irradiance corrections to measured I-V characteristics
KS B ISO 13916:2013 Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS C IEC 60891-2023 Photovoltaic devices — Procedures for temperature and irradiance corrections to measured I-V characteristics
KS C IEC 60891-2012(2017) Photovoltaic devices－Procedures for temperature and irradiance corrections to measured I-V characteristics
KS I ISO TS 13471-1-2023 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method
KS C IEC 60068-2-38-2014(2019) Environmental testing — Part 2-38: Tests — Test Z/AD: Composite temperature/humidity cyclic test
KS A 0512-2009(2019) Method of temperature measurement by liquid-in-glass thermometers
KS A 0512-2019 Method of temperature measurement by liquid-in-glass thermometers
KS A 0051-1995 TEMPERATURE (CELSIUS-FANRENEIT) CONVERSION TABLES
KS B ISO 13916:2003 Welding-Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS C 0076-1990(2017) Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
KS A 0514-1994 Method of temperature measurement by filled-system thermometers and bimetallic thermometers
KS A 0512-2024 Method of temperature measurement by liquid-in-glass thermometers
KS W ISO 8940:2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS A 0512-1994 Method of temperature measurement by liquid-in-glass thermometers
KS B 5217-1990 Bimetallic thermometers for atmospheric temperature
KS V 8012-1977 General rules on the temperature test of electric lighting fittings (incandescent lamps) for marine use
KS W ISO 8940-2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS M ISO 91-2-2008(2023) Petroleum measurement tables－Part 2：Tables based on a reference temperature of 20℃
KS D 0411-2022 Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE AT-01-1-4-2001 Radiant Panel Surface Temperature Over a Range of Ambient Temperatures
ASHRAE 3763-1994 Predicting the Temperature@ Humidity@ Pressure@ and/or Density Effects on Velocity Instrumentation
ASHRAE 4167-1998 The Effects of Temperature@ Light@ and Sound on Perceived Work Environment
ASHRAE 4492-2001 Relative Humidity and Temperature Measurements and Predictions in Supermarkets
ASHRAE AB-10-017-2010 Combined Effects of Noise and Temperature on Human Comfort and Performance
ASHRAE DA-00-3-5-2000 Impact of Heating Systems and Wall Surface Temperatures on Room Operative Temperature Fields

Magyar Szabványügyi Testület

MSZ 15804/2-1980 Enameled wire temperature detection. surface temperature
MSZ 8888/7-1981 environmental test. Temperature change rate detection
MI 8887/19-1984 Environmental testing plan. Temperature/low pressure
MSZ 15804/5-1980 Enameled wire temperature detection. temperature content
MSZ 15804/1-1980 Enameled wire temperature detection softening temperature
MSZ 6029-1958 Template temperature measurement equipment. Device connection ring
MSZ 15804/3-1981 Definition of temperature index for enameled wire temperature detection

International Organization for Standardization (ISO)

ISO 8279:1997 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
ISO 9618:1996 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (
ISO 9609:1996 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient tempe
ISO 9609:2016 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 9
ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
ISO 10096:1997 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa
ISO 12268:1997 Aerospace - Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads; classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa (at ambient temp
ISO 9199:1998 Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at
ISO 13589:1998 Aerospace - Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/
ISO 12278:1999 Aerospace - Nuts, barrel, self-locking, floating, self-aligning, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/235 °C, 1250 MPa (at ambient temperature)/235 °C and 1550 MPa (at ambient tempera
ISO/TS 13732-2:2001 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 2: Human contact with surfaces at moderate temperature
ISO 3384:1986 Rubber, vulcanized; Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO 13916:2017 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 18549-1:2009 Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Part 1: Determination of apparent density at elevated temperatures
ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 12277:2000 Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1100 MPa (at ambient temperature)/120 °C, 1100 MPa (at ambient temperature)/235 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions

British Standards Institution (BSI)

BS ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
BS EN IEC 60891:2021 Photovoltaic devices. Procedures for temperature and irradiance corrections to measured I-V characteristics
BS A 321:1997 Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C and 900 MPa (at ambient temperature)/425°C. Dimensions
BS EN 60891:1995 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices
PAS 62178-2000 Temperature Cycling (Edition 1.0)
19/30369159 DC BS EN 60891. Photovoltaic devices. Procedures for temperature and irradiance corrections to measured I-V characteristics
05/30128671 DC ISO 8279. Aerospace. Nuts, hexagonal, plain, normal-height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 degreesC, 600 MPa (at ambient temperature)/235 degreesC, 900 MPa (at ambient temperature)/425 degree...
BS EN 60068-2-39:2016 Environmental testing. Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BS 7908:1999 Packaging - Temperature and time-temperature indicators - Performance specification and reference testing
BS EN 13190:2001 Dial thermometers
BS EN IEC 60068-2-14:2023 Environmental testing - Tests. Test N: Change of temperature
BS 2011-2.1N:1985 Environmental testing. Tests-Test N. Change of temperature
BS IEC 62397:2022 Nuclear power plants. Instrumentation and control important to safety. Resistance temperature detectors
BS EN 60068-2-14:2009 Environmental testing — Part 2-14: Tests — Test N: Change of temperature
BS A 359:2000 Nuts, barrel, self-locking, floating, with MJ threads, classifications. 900 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/235°C, 1250 MPa (at ambient temperature)/235°C, 1550 MPa (at ambient temperature)/235°C. Dimensions
BS ISO 12273:2010 Aerospace. Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/ 315 °C and 900 MPa (at ambient temperature)/425 °C. Dimensions
BS EN IEC 60068-2-38:2021 Environmental testing. Tests. Test Z/AD: Composite temperature/humidity cyclic test
BS EN 13486:2023 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Periodic verification
BS A 337:1999 Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 329:1999 Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS PD ISO/TS 13471-2:2022 Acoustics. Temperature influence on tyre/road noise measurement-Correction for temperature when testing with the pass-by methods
BS A 336:1999 Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
22/30454354 DC BS EN 13486. Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Periodic verification
BS 2011-2.1Z/AD:1977 Environmental testing. Tests-Tests Z/AD. Composite temperature/humidity cyclic test
BS EN 13485:2023 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
BS EN ISO 13916:2017 Welding. Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement. Correction for temperature when testing with the CPX method
BS PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement-Correction for temperature when testing with the CPX method
BS EN ISO 17233:2003 Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings
PAS 62206-2000 Power and Temperature Cycling (Edition 1.0)
BS 1041-7:1964 Code for temperature measurement-Temperature/time indicators
BS EN 13202:2000 Ergonomics of the Thermal Environment - Temperatures of Touchable Hot Surfaces - Guidance for Establishing Surface Temperature Limit Values in Product Standards with the Aid of EN 563
BS EN 60068-3-2:1999 Environmental testing. Guidance. Combined temperature/low air pressure tests
22/30454351 DC BS EN 13485. Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
BS EN 15758:2010 Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects
BS DD IEC/TS 62306:2006 Ultrasonics. Field characterisation. Test objects for determining temperature elevation in diagnostic ultrasound fields
DD IEC/TS 62306:2006 Ultrasonics. Field characterisation. Test objects for determining temperature elevation in diagnostic ultrasound fields
BS PD ISO/TR 13732-2:2001 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Human contact with surfaces at moderate temperature
PD ISO/TS 13471-2:2022 Acoustics — Temperature influence on tyre/road noise measurement Part 2: Correction for temperature when testing with the pass-by methods
PD ISO/TS 13732-2:2001 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Human contact with surfaces at moderate temperature
BS 4683-1:1971 Specification for electrical apparatus for explosive atmospheres-Classification of maximum surface temperatures
BS 5235:1975 Specification for dial-type expansion thermometers
BS 1041-3:1969 Code for temperature measurement-Industrial resistance thermometry
BS 1041-3:1960 Code for temperature measurement. Industrial electrical resistance thermometry
BS 903-A42:1992 Physical testing of rubber-Method for determination of stress relaxation in compression at ambient and at elevated temperatures

Gosstandart of Russia

GOST 11506-1973 Petroleum asphalt. Method for determination of softening point by ring and ball
GOST 25183.10-1982 Photographic gelatine. Method of moisture determination
GOST 10627-1971 Telescopes of pyrometers of built up radiation. Calibration tables
GOST R IEC 60598-2-24-1999 Luminaries. Part 2-24. Particular requirements. Luminaries with limited surface temperatures
GOST R IEC 61853-1-2013 Photovoltaic modules. Determination of performance testing and energy rating. Part 1. Irradiance and temperature performance measurement according to irradiance and temperature. Power rating
GOST 25635-1983 Photographic materials on transparent base. Method for determination of deformation and delamination temperature and melting point

Association of German Mechanical Engineers

VDI VDE 3520 Blatt 1-2023 Surface temperature measurement with contact thermometers
VDI/VDE 5585 BLATT 1-2018 Technische Temperaturmessung - Temperaturmessung mit Thermografiekameras - Messtechnische Charakterisierung
VDI/VDE 5585 BLATT 1 BERICHTIGUNG:2018 Technical temperature measurement — Temperature measurement with thermographic cameras — Metrological characterization
VDI/VDE 5585 BLATT 1:2018 Technical temperature measurement — Temperature measurement with thermographic cameras — Metrological characterization
VDI/VDE 5585 BLATT 1-2016 Technische Temperaturmessung - Temperaturmessung mit Thermografiekameras - Messtechnische Charakterisierung
VDI/VDE 3511 BLATT 4.4-2005 Technical temperature measurement — Radiation thermometry — Calibration of radiation thermometers
VDI/VDE 3511 Blatt 4-1995 Technische Temperaturmessungen - Strahlungsthermometrie
VDI/VDE 3511 Blatt 4-2010 Technische Temperaturmessung - Strahlungsthermometrie
VDI/VDE 3511 Blatt 4.4-2004 Technische Temperaturmessungen - Strahlungsthermometrie - Kalibrierung von Strahlungsthermometern
VDI/VDE 3511 BLATT 4-2011 Technical temperature measurement — radiation thermometry
VDI VDE 3511 Blatt-4-7 E:2022-03 Temperature measurement in industry – Radia- tion thermometry – Ratio radiation thermometers
VDI/VDE 3511 BLATT 4.4-2005 Technical temperature measurement — Radiation thermometry — Calibration of radiation thermometers
VDI/VDE 3511 BLATT 4-2011 Technical temperature measurement — radiation thermometry
VDI/VDE 3511 BLATT 4.5-2015 Technical temperature measurement — Radiation thermometry — Practical application of radiation thermometers
VDI/VDE 3511 BLATT 2-1996 Technical temperature measurements — contact thermometers
VDI/VDE 3511 BLATT 2-1996 Technical temperature measurements — contact thermometers
VDI/VDE 3511 Blatt 4.5-2014 Temperature measurement in industry - Radiation thermometry - Practical usage of radiation thermometres
VDI/VDE 3511 BLATT 4.5-2015 Technical temperature measurement — Radiation thermometry — Practical application of radiation thermometers
VDI/VDE 3511 BLATT 5-1994 Technical temperature measurements — installation of thermometers
VDI/VDE 3511 Blatt 4.1-1999 Temperature measurement in industry - Specification for radiation thermometers
VDI/VDE 3511 Blatt 4.1-2001 Technische Temperaturmessungen - Spezifikation von Strahlungsthermometern
VDI/VDE 3511 BLATT 4.1-2020 Technical temperature measurement - radiation thermometry - terms
VDI/VDE 3512 BLATT 4-2017 Temperature measurement for building automation — Testing of temperature sensors
VDI/VDE 3512 Blatt 4-2007 Temperaturmessung fuer die Gebaeudeautomation - Pruefung von Temperaturfuehlern
VDI VDE 3512 Blatt 4-2017 Temperature measurement for building automation Testing of temperature sensors
VDI VDE 3511 Blatt 4-2011 Radiation thermometry - Part 4
VDI/VDE 3512 BLATT 2-2017 Temperature measurement for building automation — temperature sensors, temperature probes and their measurement parameters
VDI/VDE 3511 BLATT 4.2-2014 Technical temperature measurements — Radiation thermometry — Maintenance and proper operation of radiation thermometers
VDI/VDE 3512 BLATT 4-2014 Temperaturmessung fuer die Gebaeudeautomation - Pruefung von Temperaturfuehlern
VDI/VDE 3511 BLATT 5-1994 Technical temperature measurements — installation of thermometers
VDI/VDE 3512 Blatt 2-2009 Temperature measurements for building automation - Temperatur sensors, temperature sensing elements and their measurements parameters
VDI/VDE 3511 BLATT 4.2-2014 Technical temperature measurements — Radiation thermometry — Maintenance and proper operation of radiation thermometers
VDI/VDE 3512 BLATT 2-2014 Temperature measurement for building automation - Temperature sensors@ temperature sensing elements and their measurement parameters
VDI/VDE 5585 BLATT 1 BERICHTIGUNG-2018 Technische Temperaturmessung - Temperaturmessung mit Thermografiekameras - Messtechnische Charakterisierung - Berichtigung zur Richtlinie VDI 5585 Blatt 1:2018-03

German Institute for Standardization

DIN EN 13202:2000 Temperature in hot environments Temperature limits for touching hot surfaces
DIN EN 60891:1996 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
DIN 16002:2017-07 Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing
DIN 16002 E:2017-02 Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing
DIN EN 13190:2002-03 Dial thermometers; German version EN 13190:2001
DIN EN 13486:2024 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification
DIN EN 13486:2022-08 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification; German and English version prEN 13486:2022 / Note: Date of issu...
DIN EN 13486:2024-10 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification
DIN EN 13485:2022-08 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability; German and English version prEN 13485:2022 / Note: Date of issue 2022-07-15*Int...
DIN EN 13485:2024-10 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
DIN EN 13485:2024 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
DIN EN 60891 E:2009 Draft Document - Procedures for temperature and irradiance corrections to measured I-V characteristics of photovoltaic devices (IEC 82/551/CDV:2008); German version FprEN 60891:2008
DIN EN ISO 13916:2018-03 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017); German version EN ISO 13916:2017
DIN ISO 815:2000 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993)
DIN 58664:1968 Meteorological instruments - Earth thermometers
DIN 16196:2015-03 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
DIN EN ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996); German version EN ISO 13916:1996
DIN EN ISO 13916 E:2017-02 Measurement of welding preheating temperature, interpass temperature and preheating maintenance temperature (draft)
DIN EN ISO 13916 E:1996-11 Measurement of welding preheating temperature, interpass temperature and preheating maintenance temperature (draft)
DIN EN 843-1:1995 Mechanical properties at room temperature
DIN EN 60068-2-14:2000 Environmental tests Part 2: Tests – Test N: Temperature changes
DIN 16196 E:2013 Draft Document - Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic-thermometers

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 12268:2017 Aerospace -- Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/315 degrees C,...
BH GSO IEC 60891:2016 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
BH GSO ISO 12274:2016 Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degr...
BH GSO ISO 12273:2016 Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees...
BH GSO ISO 9199:2017 Aerospace -- Nuts, bihexagonal, self-locking, MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 MPa (at ambient tempe...
BH GSO ISO 13589:2017 Aerospace -- Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 ...
BH GSO ISO 10096:2017 Aerospace -- Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/
BH GSO ISO 18549-1:2017 Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 1: Determination of apparent density at elevated temperatures
BH GSO IEC 60068-2-39:2022 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BH GSO ASTM E1594:2015 Standard guide for the expression of the temperature
BH GSO ISO 13916:2016 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
BH GSO IEC/TS 62306:2016 Ultrasonics - Field characterisation - Test objects for determining temperature elevation in diagnostic ultrasound fields

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 12268:2015 Aerospace -- Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/315 degrees C,...
OS GSO ISO 8279:2017 Aerospace -- Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/425 degrees C, 1 10
OS GSO IEC 60891:2014 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
OS GSO ISO 9618:2017 Aerospace -- Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)...
OS GSO ISO 12273:2013 Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees...
OS GSO IEC 62397:2014 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
OS GSO ISO 9199:2016 Aerospace -- Nuts, bihexagonal, self-locking, MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 MPa (at ambient tempe...
OS GSO ISO 13589:2015 Aerospace -- Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 ...
OS GSO ISO 18549-1:2016 Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 1: Determination of apparent density at elevated temperatures
OS GSO ISO 13916:2014 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
OS GSO ISO 6892:2007 Metallic Materials – Tensile Testing at Ambient Temperature
OS GSO IEC 60068-2-38:2015 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
OS GSO IEC/TS 62306:2015 Ultrasonics - Field characterisation - Test objects for determining temperature elevation in diagnostic ultrasound fields
OS GSO ISO 24033:2013 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength

GCC Standardization Organization

GSO ISO 12268:2015 Aerospace -- Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/315 degrees C,...
GSO ISO 8279:2017 Aerospace -- Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/425 degrees C, 1 10
GSO ISO 13916:2014 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
GSO ISO 9618:2017 Aerospace -- Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)...
GSO ISO 12274:2013 Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degr...
GSO ISO 12273:2013 Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees...
GSO ISO 9199:2016 Aerospace -- Nuts, bihexagonal, self-locking, MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 MPa (at ambient tempe...
GSO ISO 13589:2015 Aerospace -- Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 ...
GSO ISO 18549-1:2016 Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 1: Determination of apparent density at elevated temperatures
GSO IEC 60068-2-39:2021 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
GSO ASTM E1594:2013 Standard guide for the expression of the temperature
GSO ISO 24033:2013 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
GSO IEC/TS 62306:2015 Ultrasonics - Field characterisation - Test objects for determining temperature elevation in diagnostic ultrasound fields

Spanish Association for Standardization (UNE)

UNE-EN 13486:2024 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification
UNE-EN IEC 60891:2022 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
AENOR UNE-EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured IV characteristics
UNE-EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
UNE-EN 13190:2002 Dial thermometers.
UNE-EN 60891:1994 PROCEDURES FOR TEMPERATURE AND IRRADIANCE CORRECTIONS TO MEASURED I-V CHARACTERISTICS OF CRYSTALLINE SILICON PHOTOVOLTAIC DEVICES
UNE-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
UNE-EN 60068-2-38:2000 ENVIRONMENTAL TESTING. PART 2: TESTS.TESTS Z/AD: COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST
AENOR UNE 20327:1977 ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES. CLASSIFICATION OF MAXIMUM SURFACE TEMPERATURES
UNE 53511:2001 Rubber, vulcanized or thermoplastic. Determination of compresion set at ambient, elevates or low temperatures.
AENOR UNE-EN 60068-2-39:2016 Environmental tests. Part 2-39: Essays. Tests and guidance: Combined temperature or temperature and humidity tests with low air pressure.
UNE-EN IEC 60068-2-38:2021 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test (Endorsed by Asociación Española de Normalización in June of 2021.)
AENOR UNE-EN 60068-2-38:2010 Environmental testing — Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
AENOR UNE-EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)
UNE-EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)
UNE-EN 60068-2-14:2000 Environmental testing. Part 2: Tests. Test N: Change of temperature

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD22-A100E-2020 Cycled Temperature-Humidity-Bias with Surface Condensation Life Test
JEDEC JESD22-A104F-2020 Temperature Cycling
JEDEC JESD22-A104C-2005 Temperature Cycling
JEDEC JESD22-A104E-2014 Temperature Cycling
JEDEC JESD22-A100-B-2000 Cycled Temperature-Humidity-Bias Life Test
JEDEC JESD22-A100D-2013 Cycled Temperature-Humidity-Bias Life Test
JEDEC JESD22-A100C-2007 Cycled Temperature-Humidity-Bias Life Test
JEDEC JEP153A-2014 Characterization and Monitoring of Thermal Stress Test Oven Temperatures

International Electrotechnical Commission (IEC)

IEC PAS 62178:2000 Temperature cycling
IEC 60891:2021/COR1:2024 Corrigendum 1 - Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
IEC 62397:2022 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
IEC PAS 62206:2000 Power and temperature cycling
IEC 60068-2-39:2015 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
IEC 60891:1987/AMD1:1992 Amendment 1 - Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices
IEC 60891:2021 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
IEC 61788-10:2006 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
IEC 60737:2010 Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary cooling circuit) - Characteristics and test methods

Comitato Elettrotecnico Italiano

CEI EN 60891:2012 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
CEI EN IEC 60695-2-13:2023 Fire Hazard Testing Part 2-13: Glow Wire Test Methods - Glow Wire Ignition Temperature (GWIT) Test Methods for Materials
CEI EN 60068-2-39:2017 Environmental testing Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
CEI EN IEC 60891:2022 Photovoltaic devices - Procedures for temperature and irradiance corrections to measure IV characteristics
CEI EN 60068-2-38:2012 Environmental testing - Part 2: Tests - Test Z/AD: Composite temperature/humidity cyclic test

Japanese Industrial Standards Committee (JISC)

JIS C 60891:2019 Photovoltaic devices -- Procedures for temperature and irradiance corrections to measured I-V characteristics
JIS D 5605:1979 Temperature indicators for automobiles
JIS R 1802:2005 Methods for surface temperature measurement of far infrared heaters by thermocouples
JIS Z 8707:1992 Method of temperature measurement by filled-system thermometers and bimetallic thermometers
JIS Z 8411:1971 Degree fahrenheit -- Degree celsius conversion tables
JIS Z 8706:1980 Methods of temperature measurement by optical pyrometers
JIS Z 3703:2004 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature

European Committee for Electrotechnical Standardization（CENELEC）

EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
EN 60598-2-24:2013 Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures
EN IEC 60068-2-38:2021 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test

Association Francaise de Normalisation

NF C57-104*NF EN IEC 60891:2021 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
NF S54-042:2006 Thermometers for bath - Temperature indicators - Specifications and marks.
NF T60-148:2003 Liquid petroleum products - Determination of the kinematic viscosity according to the temperature
NF EN 13190:2002 Thermomètres à cadran
NF X35-111:1994 Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperatur limit values for hot surfaces.
NF E18-151*NF EN 13486:2023 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification
NF C71-000-2-24*NF EN 60598-2-24:2013 Luminaires - Part 2-24 : particular requirements - Luminaires with limited surface temperatures
NF EN 13486:2023 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification
NF EN 13485:2023 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
NF L72-410:1954 Aircraft instruments with round dials. Temperature gauges.
NF E18-156*NF EN 13485:2023 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
NF C20-700-2-39*NF EN 60068-2-39:2016 Environmental testing - Part 2-39 : tests - Tests and guidance : combined temperature or temperature and humidity with low air pressure tests
NF U42-169*NF EN 15922:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature
NF EN ISO 13916:2018 Welding - Measuring preheat temperature, interpass temperature and preheat hold temperature
NF C57-104:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
NF X35-201:1994 Hot environments. Estimation of the heat stress on working man, based on the wbgt-index (wet bulb globe temperature).
NF A89-253*NF EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
NF EN 60068-2-39:2016 Environmental tests - Part 2-39: tests - Tests and guidelines: combined temperature or temperature and humidity tests at low atmospheric pressure
NF C57-104*NF EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics.
NF X80-010*NF EN 15758:2010 Conservation of cultural property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects.
NF EN IEC 60068-2-38:2021 Environmental tests - Part 2-38: tests - Z/AD test: composite cyclic temperature and humidity test

Danish Standards Foundation

DANSK DS/EN 60891:2010 Photovoltaic devices – Procedures for temperature and irradiance corrections to measured I-V characteristics
DS/EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
DS/EN 13190:2002 Dial thermometers
DANSK DS/EN 13190:2001 Dial thermometers
DANSK DS/EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
DANSK DS/EN IEC 60891:2021 Photovoltaic devices – Procedures for temperature and irradiance corrections to measured IV characteristics
DS/ISO 3384:1989 Rubber, vulcanized. Determination of stress relaxation in compression at ambient and at elevated temperatures
DANSK DS/EN 60068-2-38:2009 Environmental testing – Part 2-38: Tests – Test Z/AD: Composite temperature/humidity cyclic test
DANSK DS/EN IEC 60068-2-38:2021 Environmental testing – Part 2-38: Tests – Test Z/AD: Composite temperature/humidity cyclic test
DS/EN 60068-2-38:2010 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
DS/EN ISO 13916:1997 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
DANSK DS/EN ISO 13916:2017 Welding – Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)
DANSK DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength

American Water Works Association (AWWA)

AWWA WQTC53007 Effects of Temperature, Water Hardness, and Recirculation on Copper Corrosion

Building Officials and Code Administrators International(U.S.)

BOCA APPENDIX A NMC COMM-1993 Degree Day and Temperature Table
BOCA APPENDIX A NECC-1993 Degree Day and Design Temperature Table
BOCA APPENDIX D NPC COMM-1993 Degree Day and Design Temperature Table
BOCA APPENDIX A NMC-1993 Degree Day and Design Temperature Table
BOCA APPENDIX B NMC-1990 Degree Day and Design Temperature Table Seventh Edition

American Society of Mechanical Engineers (ASME)

ASME B89.6.2-1973(R2017) Temperature and Humidity Environment for Dimensional Measurement
ASME B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ASME PTC 19.3-1974(R2004) Temperature Measurement
ASME PTC 19.3-2024 Temperature Measurement
ASME PTC 19.3-1961 Temperature Measurement

Bureau of Indian Standards

IS 13153-2024 Aerospace - Nuts, Hexagonal, Plain, Normal Height, Normal Across Flats, with MJ Threads, Classifications: 600 Mpa (at Ambient Temperature)/120 Â°C, 600 Mpa (at Ambient Temperature)/235 Â°C, 900 Mpa (at Ambient Temperature)/425 Â°C, 1 100 Mpa (at Ambien...
IS 12763-2024 Photovoltaic Devices-Procedures for Temperature and Irradiance Corrections to Measured I-V Characteristics

Standards Norway

NS-EN 13190:2001 Dial thermometers
NS-EN 13202:2000 Ergonomics of the thermal environment — Temperatures of touchable hot surfaces — Guidance for establishing surface temperature limit values in production standards with the aid of EN 563
NS-EN ISO 13916:2017 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)

BR-ABNT

ABNT PB-18-1956 Reference temperature for industrial measurements of linear dimensions
ABNT MB-71-1972 Mb-71. Ambient temperature compression detection
ABNT MB-72-1972 Mb-72. Ambient temperature elasticity detection

Swedish Institute for Standards

SS-EN 13190:2001 Dial thermometers
SS-EN IEC 60891:2022 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
ISO 9157 Aerospace - Nuts, spline-drive, self-locking, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 MPa (at ambient te
SS-ISO 9199:2002 Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 MPa (at ambient temper...
SS-ISO 7995:2002 Aerospace - Nuts, hexagonal, self-locking, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 °C, 1 100 MPa (at ambient temperature)/315 °C and 1 100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 7995 Aerospace - Nuts, hexagonal, self-locking, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature /315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C - Dimensions
SS-EN 13486:2023 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification
ISO 12277 Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1 100 MPa (at ambient temperature) / 120 degrees C, 1 100 MPa (at ambient temperature) / 235 degrees C and 1 100 MPa (at ambient temperature) / 425 degr
SS-EN 13485:2023 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
SS-EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)
SS-EN 60682:1994 Lighting equipment - Standard method of measuringthe pinch temperature of quartz-tungsten-halogen lamps

Lithuanian Standards Office

LST EN 13190-2002 Dial thermometers

SE-SIS

SIS SEN 43 16 13-1971 Environmental testing. Change of temperature. Test N
SIS SS 11 23 24-1981 Metallic materials — Relaxation testing at ambient temperature

American National Standards Institute （ANSI)

ANSI B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ANSI/ASME B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ANSI/IES LM-98-24 Method for measuring temperature of solid-state lighting components in situ
ANSI/ATIS 0600004-2006 Equipment Surface Temperature
ANSI/ASHRAE 41.1-2020 errata 2022 ERRATA SHEET FOR ANSI/ASHRAE STANDARD 41.1-2020 Standard Methods for Temperature Measurement
ANSI/EIA/TIA 455-69A:1991 Test Procedure for Minimum and Maximum Exposure Temperature Evaluation of Optical Fibers
ANSI/IES LM-82-20 CHARACTERIZATION OF OPTICAL AND ELECTRICAL PROPERTIES OF SOLID-STATE LIGHTING PRODUCTS AS A FUNCTION OF TEMPERATURE
ANSI/TIA/EIA 455-162A-1999 Fiber Optic Cable Temperature-Humidity Cycling
ANSI/EIA/TIA 455-3A:1989 Procedure to Measure Temperature Cycling Effects on Optical Fiber, Optical Cable, and Other Passive Fiber Optic Components
ANSI/TIA-455-162-A-1999(2013) FOTP-162 Optical Fiber Cable Temperature Humidity Cycling
ANSI/TIA-455-162A-1999 Fiber Optic Cable Temperature-Humidity Cycling

Ente Nazionale Italiano di Unificazione

UNI 11120:2004 Cultural heritage - Field measurement of the air temperature and the surface temperature of objects
UNI EN 13486:2024 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification
UNI EN 15758:2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
UNI EN 13485:2024 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
UNI EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
UNI EN 13202:2002 Ergonomics of the thermal environment - Temperatures of touchable hot surfaces - Guidance for establishing surface temperature limit values in production standards with the aid of EN 563
UNI EN ISO 13916:1997 Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature.

Indonesia Standards

SNI 16-7061-2004 The measurement of work climates (hot) by wet bulb globe temperature index parameters

ATIS - Alliance for Telecommunications Industry Solutions

0600004-2017 Equipment Surface Temperature
0600004-2006 Equipment Surface Temperature

BE-NBN

NBN X 10-005-1986 Moderate thermal environments - Determination of the PMV and PDD indices and specification of the conditions for thermal confort
NBN-ISO 815:1994 Rubber, vulcanized or thermoplastic. Determination of compression set at ambient, elevated or low temperatures

American Society for Testing and Materials (ASTM)

ASTM E2264-23 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
ASTM E2264-24 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
ASTM D6176-97(2003) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM DS39B-1975 Viscosity Index Table (Celsius)
ASTM D6176-97(2008) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM D6176-97(2022) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D6176-97(2015) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM D2493-01 Standard Viscosity-Temperature Chart for Asphalts
ASTM D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D2493-95a Standard Viscosity-Temperature Chart for Asphalts
ASTM E1594-99 Standard Guide for Expression of Temperature
ASTM D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM STP 858-1985 Effect of temperature on concrete
ASTM E639-78(2002) Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
ASTM D2493-01e1 Standard Viscosity-Temperature Chart for Asphalts
ASTM D6176M-97 Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric)
ASTM E639-78(1996)e1 Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
ASTM E1594-16 Standard Guide for Expression of Temperature
ASTM E1594-11 Standard Guide for Expression of Temperature
ASTM E1594-22 Standard Guide for Expression of Temperature
ASTM E1594-06 Standard Guide for Expression of Temperature

International Telecommunication Union (ITU)

ITU-R P.1510-2017 Mean surface temperature
ITU-R P.1510-1-2017 Mean surface temperature
ITU-R P.1510 FRENCH-2001 Annual Mean Surface Temperature
ITU-R P.1510 SPANISH-2001 Annual Mean Surface Temperature
ITU-R P.1510-2001 Annual Mean Surface Temperature

IN-BIS

IS 12763-1989 Procedure for temperature and irradiance correction of measured IV characteristics of crystalline silicon photovoltaic devices
IS 2806-1964 Resistance thermometer temperature measurement method
IS 9000 Pt.14/Sec.2-1988 Basic environmental testing procedures for electronic and electrical products Part 14 Test N: Temperature change Section 2: Test Nb: Temperature change at a specified rate (temperature cycling) - Single chamber method
IS 6500-1972 Specification for thermometers for measuring sea surface temperature

Society of Automotive Engineers (SAE)

SAE AS428-1996 Exhaust Gas Temperature Instruments
SAE AS428-2008 Exhaust Gas Temperature Instruments
SAE AS428-1966 Exhaust Gas Temperature Instruments
SAE AS428 Exhaust Gas Temperature Instruments
SAE AS210-2014 Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude)
SAE AS4851 Relative Thermal Life and Temperature Index
SAE AS8005 Minimum Performance Standard Temperature Instruments

Alliance of Telecommunications Industry Solutions （ATIS)

ATIS 0600004-2006 Equipment Surface Temperature

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0710-5 DIN VDE 0710-5-1983*DIN 57710-5:1983 Luminaires with operating voltages below 1000 V; luminaires with limited surface temperatures
VDE 0468-2-38 E*DIN IEC 60068-2-38:2007-11 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
VDE 0472-233-1989*DIN VDE 0472-233:1989 Testing of cables, wires and flexible cords; changing of attenuation of optical fibre cables during temperature cycling
VDE 0468-2-39-2013 Environmental testing - Part 2-39: Tests and Guidance: Combined temperature or temperature and humidity with low air pressure tests (IEC 104/609/CDV:2013); German version FprEN 60068-2-39:2013

European Committee for Standardization (CEN)

EN 13486:2023 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification
EN 60598-2-24:1998 Luminaires - Part 2: Particular requirements - Section 24: Luminaires with limited surface temperatures
EN 13485:2023 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
EN 13202:2000 Ergonomics of the Thermal Environment - Temperatures of Touchable Hot Surfaces - Guidance for Establishing Surface Temperature Limit Values in Product Standards with the Aid of EN 563
EN 15758:2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects

CENELEC - European Committee for Electrotechnical Standardization

EN 60891:1994 Procedures for Temperature and Irradiance Corrections to Measured I- V Characteristics of Crystalline Silicon Photovoltaic Devices

YU-JUS

JUS U.J5.150-1983 Elsctrical temperatule mennring.lntruments calibration tables of resistance elements for resistance thermometres
JUS N.A5.900-1984 Basic environmental testing procedures. TestZ/AD: Composite temperature/humidity cyclic test

Standard Association of Australia （SAA）

AS B69:1940 Table of approximate comparison of hardness scales
AS ISO 13916:2018 Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
AS 1099.2NB:1973 Basic environmental testing procedures for electrotechnology, Part 2NB: Tests - Test Nb - Change of temperature - Change of temperature, one-chamber method
AS 1099.2N:1973 Basic environmental testing procedures for electrotechnology, Part 2N: Tests - Test N - Change of temperature - Guidance on change of temperature tests

GM North America

GM GM9310P-1988 Variable Surface Temperature Heat Exposure Test

ESDU - Engineering Sciences Data Unit

ESDU 06019-2007 Temperature measurement: resistance thermometry.

PL-PKN

PN M53802-1960 Thermometets for Te??lng Flash - Point by th? Marcus*on Me?hod
PN C04835-1986 Non-ionic surface active agents obtained from ethylene oxide Determination of cloud temperatur? (cloud point)
PN M53858-1988 Electric thermometers Connection lines for electrical thermometers
PN C89085-21-1988 Epoxy resins Methods of testing Determination of the peak temperatur?
PN M53854-00-1992 Electric thermometers Thermometric characteristics for thermocouples Classification and designations of thermocouples

CZ-CSN

CSN 25 8148-1966 Thermometers for determination of softening point by means of ring- and-ball apparatus
CSN 25 7818-1980 Volumetric drum-type water meters; up-to 90 °C
CSN 64 0345-1974 Determinalicn of the maximum temp^rature nd the rate cf increase of temperature uring the setting of unsaturated polyester esins by 25 °C and 80 °C
CSN 66 6653-1981 Determination of deformation temperature, liberating temperature and melting point

RO-ASRO

STAS 12079-1982 RUBBKK O RING Determination of low temperature eharaeteristics by a temperature retraction procedure (TK test)
STAS 8375/2-1969 Laboratory thermometer. boiling point thermometer
STAS 8393/14-1987 Environmental testig procedures CHANGE OF TEMPERATURE . Tests : Na, Nb and Nc

AT-ON

ONORM M 5820-1965 Temperaturmessung Strahlungspyrometer

GM Europe

GME OPEL 100-1974 Steel and cast steel hardness comparison table (German)

FI-SFS

SFS 3299-1979 Detect temperature

IPC - Association Connecting Electronics Industries

IPC TM-650 2.6.6B-1987 Temperature Cycling@ Printed Wiring Board

TH-TISI

TIS 902.2(12)-2014 luminaires with limited surface temperatures

CEN - European Committee for Standardization

EN ISO 13916:2017 Welding - Measurement of preheating temperature@ interpass temperature and preheat maintenance temperature

American Petroleum Institute (API)

API MPMS 7 2001 add2-2017 Temperature measurement
API MPMS 7 2001 add1-2011 Temperature measurement
API MPMS 7.2-2018(2023) Temperature measurement

National Electrical Manufacturers Association（NEMA)

NEMA WD 50000-2023 High Ambient Temperature Test Procedure for Wiring Devices

(U.S.) Telecommunications Industries Association

TIA-455-162-A-1999(2013) FOTP-162 Optical Fiber Cable Temperature Humidity Cycling
TIA-455-162-A-1999 FOTP-162 Optical Fiber Cable Temperature Humidity Cycling

IT-UNI

UNI 5008-1962 Mechanical thermometers and refrigerator thermometers for ships. List of common categories

American Welding Society (AWS)

WRC 086:1963 Welding Of Steel At Low Ambient Temperatures

NL-NEN

NEN 3462-1988 Milk - Determination of the freezing point with a mercury thermometer (reference method)

Others: