First level laboratory

First level laboratory, Total:185 items.

The international standard classification for "First level laboratory" includes: Protection against crime , Graphical symbols for use on specific equipment , Tobacco, tobacco products and related equipment , Energy and heat transfer engineering in general , Laboratory medicine , Sensory analysis .

The Chinese standard classification for "First level laboratory" includes: Crime judging technology , Codification , Tobacco curing in general , Technical management , Medical laboratory equipment , Basic standards and general methods .

Professional Standard - Public Safety Standards

GA/T 1660-2019 Specifications for construction of video crime investigative laboratory
GA/T 1569-2019 Forensic sciences-Specifications for building laboratories for electronic evidence examination

Professional Standard - Agriculture

水产品质量安全检验手册 1.1.2.3-2005 Chapter 1 General Introduction Section 1 Laboratory Management 2. Basic Laboratory Requirements (3) Technical Requirements for Microbiological Laboratory Operations
水产品质量安全检验手册 1.1.2.1-2005 Chapter 1 General Introduction Section 1 Laboratory Management 2. Basic requirements of laboratories (1) General requirements for physical and chemical laboratory work
水产品质量安全检验手册 1.1.2.2-2005 Chapter 1 General Introduction Section 1 Laboratory Management 2. Basic Requirements of the Laboratory (2) General Requirements for Microbiological Laboratory Work
水产品质量安全检验手册 1.5.1.0-2005 Chapter 1 General Introduction Section 5 Laboratory Inspection and Analysis Basis 1. Analytical Laboratory Water Specifications and Test Methods (GB 6682-1992)
水产品质量安全检验手册 1.1.1.3-2005 Chapter 1 General Introduction Section 1 Laboratory Management 1. Laboratory Layout and Indoor Facilities Requirements (3) Laboratory Ventilation System
水产品质量安全检验手册 1.1.1.1-2005 Chapter 1 General Introduction Section 1 Laboratory Management 1. Laboratory layout and indoor facility requirements (1) Laboratory location selection
水产品质量安全检验手册 1.1.1.2-2005 Chapter 1 General Introduction Section 1 Laboratory Management 1. Laboratory Layout and Indoor Facilities Requirements (2) Laboratory Layout

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 4553-2022 Specifications for biosafety risk monitoring procedures for novel coronavirus etiology laboratories
DB65/T 4546-2022 Layout principles and basic equipment configuration specifications of plague field surveillance laboratories

Professional Standard - Commodity Inspection

SN/T 3902-2014 General requirements for biosafety level Ⅱ laboratories of inspection and quarantine
SN/T 2024-2007 Requirements of biosafety levels for entry and exit animal quarantine laboratories

Group Standards of the People's Republic of China

T/LZZLXH 032-2020 Specification for safety management in laboratory
T/CITS 0019-2023 Specification for grade evaluation of digital laboratories
T/CECS 662-2020 Architectureal Technical Standard for BSL-2 Laboratory in Medical Facilities
T/ZS 0628-2024 Technical specification for door setting of BSL- 2 laboratory
T/CSIQ 8015-2018 Criteria for laboratory grading evaluation
T/SAME 001-2022 Management requirements for level II biosafety cabinets in clinical laboratories
T/CITS 0114-2024 Guideline of biosafety level 2 laboratory construction procedure

国家质量监督检验检疫总局

SN/T 2024-2017 Requirements of biosafety levels for entry and exit animal quarantine laboratories

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33710-2017 Mobile laboratory -- Method for classification and gradation

Professional Standard - Tobacco

YC/T 291-2009 Ambient condition of tobacco grading laboratory

Ningxia Provincial Standard of the People's Republic of China

DB64/T 1868-2023 Specifications for the construction of county-level food testing laboratories
DB64/T 1867-2023 Guidelines for Classified Construction of Food Rapid Testing Laboratories

Professional Standard - Water Conservancy

SL 684-2014 Classification and rating standard for water environmental monitoring laboratory

水利部

SL/T 684-2014 Classification and grading standards for water environment monitoring laboratories

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40326-2021 Energy efficiency grades for laboratory equipment—Drug stability test chambers

未注明发布机构

DIN 30665-2 E:2020-10 Gas-appliances - Gas burners for laboratory use (laboratory burners) - Part 2: Conformity
DIN CEN/TS 17329-1:2019*DIN SPEC 10392-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23470.1-2009 Sensory analysis—General guidance for the staff of a sensory evaluation laboratory—Part 1:Staff responsibilities
GB/Z 30154-2013 Medical laboratories—Guidance on laboratory implementation of GB/T 22576—2008
GB 50346-2011 Architectural and technical code for biosafety laboratories
GB 11415-1989 Laboratory Sintered (Porous) Filter Pore Size, Classification and Designation

Professional Standard - Machinery

JB/T 7439.6-1994 Terminology relating to laboratory instruments - Laboratory centrifuge

Anhui Provincial Standard of the People's Republic of China

DB34/T 4425-2023 Guidelines for the construction of therapeutic drug monitoring laboratories in medical institutions

Taiwan Provincial Standard of the People's Republic of China

CNS 17025-2001 General requirements for the competence of testing and calibration laboratories
CNS 17025-2007 General requirements for the competence of testing and calibration laboratories

Professional Standard - Electron

SJ/Z 3206.1-1989 General requirements for laboratories involved with determination of emision spectrum

Military Standard of the People's Republic of China-General Armament Department

GJB 2725-1996 General requirements for calibration laboratories and testing laboratories
GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1786-2018 Food production enterprise testing laboratory classification management rules

US-FCR

FCR COE CERC-94-3 FINAL REPORT-1994 SUPERTANK LABORATORY DATA COLLECTION PROJECT; VOLUME I: MAIN TEXT

Korean Agency for Technology and Standards (KATS)

KS D 0299-2019 Laboratory method for the preparation of rust grades
KS D 0299-2009 Laboratory method for the preparation of rust grades
KS L ISO 1042-2006(2021) Laboratory glassware－One－mark volumetric flasks
KS P ISO TR 22869-2019 Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS P ISO TR 22869-2009(2019) Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS C IEC 60477-2023 Laboratory resistors－Laboratory d.c. resistors
KS C IEC 60477-2013(2018) Laboratory resistors－Laboratory d.c. resistors
KS P ISO 15195-2014(2019) Laboratory medicine — Requirements for reference measurement laboratories
KS P ISO 15195:2007 Laboratory medicine-Requirements for reference measurement laboratories
KS L ISO 648:2006 Laboratory glassware-One-mark pipettes
KS L ISO 648:2016 Laboratory glassware－One－mark pipettes
KS C IEC 60477:2013 Laboratory resistors－Laboratory d.c. resistors
KS L ISO 1042-2006(2016) Laboratory glassware－One－mark volumetric flasks
KS P ISO 15195:2014 Laboratory medicine — Requirements for reference measurement laboratories

ES-AENOR

UNE 66-501-1-1991 General guidelines for laboratory testing
UNE 66-800-1989 General provisions regarding skills in laboratory experiments
UNE 66-501-1991 General operating standards for testing laboratories
UNE 66-502-1991 General criteria for the assessment of testing laboratories
UNE 66-801-1989 General rules for passing laboratory tests

HU-MSZT

MSZ 18000/9-1971 Brown coal laboratory testing. Flammability rating
MSZ 6619-1970 General provisions for laboratory equipment
MSZ 12000/3.lap-1968 Laboratory testing. General inspection standards for hard coal
MSZ 18000/3-1971 Brown coal laboratory testing. General testing standards

RO-ASRO

STAS 5548-1966 Laboratory glass products. Faucet classification
STAS SR EN 45003-1993 General criteria for laboratory accreditation bodies

GSO

GSO ISO 7056:2007 Plastics laboratory ware - Beakers
OS GSO ISO 1042:2007 Laboratory glassware – one mark volumetric flasks
OS GSO ISO/TR 22869:2016 Medical laboratories -- Guidance on laboratory implementation of ISO 15189: 2003
GSO ISO/TR 22869:2016 Medical laboratories -- Guidance on laboratory implementation of ISO 15189: 2003
GSO ISO 12772:2010 Laboratory glassware -- Disposable microhaematocrit capillary tubes
GSO ISO 12771:2010 Plastics laboratory ware -- Disposable serological pipettes
GSO ISO 15195:2012 Laboratory medicine -- Requirements for reference measurement laboratories

American National Standards Institute （ANSI)

AMCA 210-74 Laboratory Methods of Testing Fans for Ratings
ANSI/AMCA 500-L-2015 Laboratory Methods of Testing Louvers for Rating
ANSI/AMCA 301-1990 Methods for Calculating Fan Sound Ratings from Laboratory Test Data
ANSI/AMCA 250-2012 Laboratory Methods of Testing Jet Tunnel Fans for Rating

SE-SIS

SIS SS 02 01 81-1985 General requirements for the acceptance of testing laboratories
SIS SS-EN 45 002-1989 General criteria for the assessment of testing laboratories
SIS SS-EN 45 001-1989 General criteria for the operation of testing laboratories
SIS SS-EN 45 003-1989 General Criteria for laborator/ accreditation bodies
SIS SS 02 01 80-1987 General requirements for the technical competence of testing laboratories

SCC

AENOR UNE 66801 IN:1989 General requirements for the acceptance of testing laboratories.
SN-CEN/TS 17441:2020 Laboratory installations — Ventilation systems in laboratories
BS PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
DANSK DS/CEN/TS 17441:2020 Laboratory installations – Ventilation systems in laboratories
DANSK DS/EN 45002:1991 General criteria for the assessment of testing laboratories
AENOR UNE 66502:1991 General criteria for the evaluation of testing laboratories.
DANSK DS/ISO/TR 22869:2005 Medical laboratories – Guidance on laboratory implementation of ISO 15189:2003
DANSK DS/CEN/TS 17329-1:2021 Foodstuffs – General guidelines for the validation of qualitative real-time PCR methods – Part 1: Single-laboratory validation
BS PD CEN/TS 17329-1:2019 Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods-Single-laboratory validation
AWWA WSC70018 Water Laboratory Alliance: A Focus on Laboratory Response
AMCA 220-21 Laboratory Methods of Testing Air Curtains for Aerodynamic Performance Ratings

RU-GOST R

GOST 24104-2001 Laboratory scales. General technical requirements
GOST R 51000.3-1996 General criteria for testing laboratories
GOST R 51000.4-2011 General requirements for accreditation of testing laboratories
GOST R 51000.4-2008 General requirements for accreditation of testing laboratories
GOST R 51000.4-1996 State system for standardization of the Russian Federation. Accreditation system in the Russian Federation. General requirements for accreditation of testing laboratories
GOST R ISO 15195-2006 Laboratory medicine. Requirements for reference measurement laboratories
GOST 31879-2012 Principles of Good Laboratory Practice (GLP). Guides for compliance monitoring procedures for GLP Principles

International Organization for Standardization (ISO)

ISO/IEC GUIDE 38:1983 General requirements for the acceptance of testing laboratories
ISO/CD 11781:2004 Foodstuffs — General guidelines for single-laboratory validation of qualitative real-time PCR methods
ISO 648:2008 Laboratory glassware - Single-volume pipettes
ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
ISO/IEC GUIDE 25:1990 General requirements for the competence of calibration and testing laboratories

PL-PKN

PN EN 45001-1993 General criteria for the operation of testing laboratories
PN EN 45002-1993 General criteria for the assessment of testing laboratories
PN EN 45003-1993 General criteria for laboratory accreditation bodies
PN B13003-1986 Laboratory glassware General specifications and methods of tests

Association of German Mechanical Engineers

DVS-EWF 1178 Beiblatt 2-1997 DVS-EWF Course - Welding Inspector Level 1 to Level 4 - Technical Inspection Training Laboratory Facilities; Personnel Requirements

Association Francaise de Normalisation

NF Q60-501:1975 General method for making an impression in the laboratory for subsequent evaluations
XP X15-300*XP CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
XP CEN/TS 17441:2020 Laboratory installations - Laboratory ventilation systems
NF EN ISO 1042:2000 Laboratory glassware - One-mark volumetric flasks
XP V03-329-1*XP CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1 : single- laboratory validation
NF X50-061:2000 General requirements for the competence of testing and calibration laboratories.
FD CEN ISO/ASTM TR 52917:2022 Fabrication additive - Essais interlaboratoires - Lignes directrices générales
NF S92-062:2004 Laboratory medicine - Requirements for reference measurement laboratories.
NF V09-105:2008 Sensory analysis - General guidance for the design of test rooms.

European Committee for Standardization (CEN)

PD CEN/TS 17329-1:2021 Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods. Single-laboratory validation
CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
EN ISO 648:2008 Laboratory glassware - Single-volume pipettes (ISO 648:2008)

FI-SFS

SFS 5120-1985 Passed by testing laboratory. General requirements

GOST

GOST 30416-2020 Soils. Laboratory testing. General

American Society for Testing and Materials (ASTM)

ASTM E1944-98(2007) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM E1944-98(2021) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests

IT-UNI

UNI 7832-1978 Average efficiency air filter. Laboratory testing and grading
UNI CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation
UNI 7833-1978 High efficiency and ultra high efficiency air filters. Laboratory testing and grading

Canadian Standards Association (CSA)

CAN/CSA-Z15190-2005 Medical laboratories - Requirements for safety (First Edition)

German Institute for Standardization

DIN EN ISO 1042:1999-08 Laboratory glassware - One-mark volumetric flasks (ISO 1042:1998); German version EN ISO 1042:1999
DIN CEN/TS 17441:2020-07 Laboratory installations - Ventilation systems in laboratories; German version CEN/TS 17441:2020
DIN 12915:1994-02 Laboratory furniture; sinks for laboratory benches
DIN 30665-2:2021-06 Gas-appliances - Gas burners for laboratory use (laboratory burners) - Part 2: Conformity / Note: This standard is part of the DVGW body of rules.*Applies in conjunction with DIN 30665-1 (2021-06).
DIN CEN/TS 17329-1:2021-09 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation; German version CEN/TS 17329-1:2021
DIN EN ISO 15195:2004 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003); German version EN ISO 15195:2003
DIN 12785:1977 Laboratory glassware; special purpose laboratory thermometers
DIN EN ISO 648:2009 Laboratory glassware - Single-volume pipettes (ISO 648:2008); English version of DIN EN ISO 648:2009-01

Military Standards (MIL-STD)

DOD A-A-54783-1994 CENTRIFUGE, LABORATORY, GENERAL PURPOSE
DOD A-A-51358-1986 TONGS, LABORATORY

DIN

DIN CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE APP IP CH 14-2007 Laboratories
ASHRAE APPLICATION IP CH 16-2011 LABORATORIES

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE HVAC APPLICATIONS IP CH 16-2015 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 14-2003 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 13-1999 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 14-2003 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 16-2011 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 13-1999 Laboratories
ASHRAE HVAC APPLICATIONS SI CH 16-2015 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 16-2011 LABORATORIES
ASHRAE HVAC APPLICATIONS IP CH 14-2007 Laboratories
ASHRAE HVAC APPLICATIONS SI CH 14-2007 Laboratories
ASHRAE DA-00-5-3-2000 Assessment of Interlaboratory Reproducibility in Fenestration Energy Ratings

GOSTR

GOST R ISO/TR 22869-2009 Medical laboratories. Quidance on laboratory implementation of ISO 15189:2003

British Standards Institution (BSI)

PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
BS EN IEC 60477-1:2022 Laboratory resistors. Laboratory DC resistors
BS 6898:1987(2007) Specification for Glass centrifuge tubes for general laboratory use
BS PD CEN/TS 17329-1:2021 Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods. Single-laboratory validation
BS EN ISO 7787-1:2016 Dentistry. Laboratory cutters. Steel laboratory cutters
23/30451050 DC BS EN ISO 11781 Foodstuffs — General guidelines for single-laboratory validation of qualitative real-time PCR methods
BS EN IEC 60477-2:2022 Laboratory resistors. Laboratory AC resistors
BS EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
BS EN 60477-2:1980 Laboratory resistors. Laboratory a.c. resistors
BS 6460-1:1983 Accreditation of testing laboratories - Specification of the general requirements for the technical competence of testing laboratories
BS EN 60477-2:1999 Laboratory resistors - Laboratory a.c. resistors
BS EN ISO 4892-1:2001 Plastics - Methods of exposure to laboratory light sources - General guidance
BS EN ISO 4892-1:1999 Plastics. Methods of exposure to laboratory light sources. General guidance
BS EN ISO 648:2008 Laboratory glassware - Single-volume pipettes(ISO 648:2008)

AT-ON

ONR CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

Lithuanian Standards Office

LST CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

CZ-CSN

CSN ISO 8589:1993 Sensory analysis — General guidance for tne design of test rooms

National Fire Protection Association (NFPA)

NFPA 99H CHAPTER 11-2002 Laboratories

CEN - European Committee for Standardization

PD CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation
EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures

ES-UNE

UNE-CEN/TS 17329-1:2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation (Endorsed by Asociación Española de Normalización in August of 2021.)

Danish Standards Foundation

DS/CEN/TS 17329-1:2021 Foodstuffs – General guidelines for the validation of qualitative real-time PCR methods – Part 1: Single-laboratory validation

VN-TCVN

TCVN 5339-1991 Anti.Corrosive protection atmospherie laborator.General requirements

KR-KS

KS C IEC 60477-2013(2023) Laboratory resistors－Laboratory d.c. resistors

TH-TISI

TIS 2277-2006 Laboratory medicine.requirements for reference measurement laboratories

CU-NC

NC 26-212-1992 GOOD LABORATOY PRACTICES

ZA-SANS

SANS 112:2009 Laboratory glassware - Single-volume pipettes

API - American Petroleum Institute

API STD 1512-1995 Petroleum Test Laboratory Accreditation Program (First Edition)