Aperture direction measurement

Aperture direction measurement, Total:114 items.

The international standard classification for "Aperture direction measurement" includes: Photographic equipment. Projectors , Rolling bearings , Testing of metals in general , Optoelectronics. Laser equipment , Geotextiles , Microbiology of water , Measurement of fluid flow .

The Chinese standard classification for "Aperture direction measurement" includes: Lens , Rolling bearing , Semimetal and semiconductor material analysis method , Metal physical property test method , Optoelectronic device assembly , Other textile articles , Separating machinery , Length Measurement , Mechanics Measurement , Diesel locomotives .

Professional Standard - Machinery

JB/T 8248.2-1999 Method for measurement for effective aperture and relative aperture of camera lenses
JB/T 3573-2004 rolling bearings—methods for the measurement of radial internal clearance

Professional Standard - Electron

SJ 2667-1986 Methods of measurement of numerical aperture of optical fibres and cables

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 44293-2024 Image measurement method for numerical aperture of microscopic objective
GB/T 11073-2007 Standard method for measuring radial resistivity variation on silicon slices
GB/T 11073-1989 Standard method for measuring radial resistivity variation on silicon slices
GB/T 25769-2010 Rolling bearings - Measuring methods for radial internal clearance
GB/T 14799-1993 Geotextiles－Determining apparent opening size of a geotextile by sieving
GB/T 32361-2015 Test methods for pore size properties of membrane filters—Bubble point and mean flow pore test
GB/T 14144-2009 Testing method for determination of radial interstitial oxygen variation in silicon
GB/T 32361-2015(英文版) Test methods for pore size properties of membrane filters—Bubble point and mean flow pore test

国家煤矿安全监察局

MT/T 1173-2019 Measuring method for gas permeability coefficient of coal seam-Radial flow method

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 1524-2013 Technical regulations for small aperture measuring instruments with large depth-to-diameter ratio

National Metrological Technical Specifications of the People's Republic of China

JJF 1806-2020 Calibration Specification for Measuring Equipmentof Diameter of Micro and Small Hole

National Metrological Verification Regulations of the People's Republic of China

JJG 988-2004 Verification Regulation of Vertical Metal Tank Diametrical Deviation Measuring Instrument
JJG 467-1986 Precision Bore Diameter Measuring Instrument

Group Standards of the People's Republic of China

T/QGCML 741-2023 Pile hole diameter detection device

Taiwan Provincial Standard of the People's Republic of China

CNS 7475-1981 Methods of Measurement for Effective Aperture, F - number, Aperture Ratio and T-number of Photographlc Lenses

未注明发布机构

DIN ISO 15242-2 E:2011-09 Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface
ASTM RR-E04-1000 1993 E1182-Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning

Military Standard of the People's Republic of China-General Armament Department

GJB 8151-2013 Measurement method for wavefront aberrance of laser beam radial shearing interference

Professional Standard - Railway

TB/T 2577-1995 Measurement Method for Main Bearing Journal Radial Circular Runout of Locomotive Diesel Engine

Association Francaise de Normalisation

NF EN 61341:2012 Method for measuring the intensity in the axis of the beam and the opening angle (or angles) of reflector lamps
NF C93-840-1-43*NF EN 60793-1-43:2015 Optical fibres - Part 1-43 : measurement methods and test procedures - Numerical aperture measurement
NF EN 60793-1-43:2015 Optical fibers - Part 1-43: measurement methods and test procedures - Measurement of numerical aperture
NF E22-325-4:2007 Rolling bearings - Measuring methods for vibration - Part 4 : radial cylindrical roller bearings with cylindrical bore and outside surface.
NF E22-325-4*NF ISO 15242-4:2017 Rolling bearings - Measuring methods for vibration - Part 4 : radial cylindrical roller bearings with cylindrical bore and outside surface

(U.S.) Telecommunications Industries Association

TIA-455-135-1997 FOTP-135 Mesurement of Connector Ferrule Inside and Outside Diameter Circular Runout
TIA/EIA-455-134-1997 FOTP-134 Measurement of Connector Ferrule Hole Inside Diameter

IPC - Association Connecting Electronics Industries

IPC TM-650 2.2.6-1973 Hole Size Measurement@ Drilled
IPC TM-650 2.2.6A-1997 Hole Size Measurement@ Drilled
IPC TM-650 2.2.7A-1986 Hole Size Measurement@ Plated

GB-REG

REG NASA-LLIS-0715-2000 Lessons Learned ?Near Field Measurement for Large Aperature Antenna Pattern Determination

CZ-CSN

CSN 72 2613-1966 Burnt facing bricks perforated
CSN 63 1506-1987 Tyre testing. Measurement of radial and lateral run-out

KR-KS

KS B 5409-2023 Methods for the measurement of the effective aperture, F-number and relative aperture of photographic lenses
KS B ISO 15242-2-2024 Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface

Korean Agency for Technology and Standards (KATS)

KS B 5409-2013(2018) Photographic lenses?Methods for the measurement of the effective aperture, F-number and relative aperture
KS B 5409-2013 Photographic lenses ? Methods for the measurement of the effective aperture, F-number and relative aperture
KS B 5409-1982 Photographic lenses ? Methods for the measurement of the effective aperture, F-number and relative aperture
KS B 5409-1998 Photographic lenses-Methods for the measurement of the effective aperture, F-number and relative aperture
KS X ISO 6342-2007(2022) Micrographics－Aperture cards－Method of measuring thickness of buildup area
KS X ISO 6342-2022 Micrographics－Aperture cards－Method of measuring thickness of buildup area
KS F 7003-2016(2021) Standard test method for bi-directional pile load test of large-diameter drilled shafts
KS X ISO 6342-2007(2017) Micrographics－Aperture cards－Method of measuring thickness of buildup area
KS R 0072-2007 Minimum turning radius test procedure of automobiles

British Standards Institution (BSI)

BS 4185-14:1987 Machine tool components - Method for determination of the pilot diameter of 60 ° centre holes
BS EN 60793-1-43:2015 Optical fibres. Measurement methods and test procedures. Numerical aperture measurement
BS ISO 15242-4:2007 Rolling bearings - Measuring methods for vibration - Radial cylindrical roller bearings with cylindrical bore and outside surface
BS 3321:1986 Method for measurement of the equivalent pore size of fabrics (bubble pressure test)
BS 3321:1986(1999) Method for Measurement of the equivalent pore size of fabrics (bubble pressure test)
BS EN 60793-1-43:2002 Optical fibres - Measurement methods and test procedures - Numerical aperture

Japanese Industrial Standards Committee (JISC)

JIS B 7095:1997 Photographic lenses -- Methods for the measurement of the effective aperture, F-number and relative aperture

American Society for Testing and Materials (ASTM)

ASTM D4971-02 Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Using the Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM D4971-02(2006) Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Using the Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM D4971-08 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM F81-00 Standard Test Method for Measuring Radial Resistivity Variation on Silicon Wafers
ASTM D7864/D7864M-15 Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
ASTM E1182-93(1998) Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning

International Electrotechnical Commission (IEC)

IEC 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods - Numerical aperture measurement

VN-TCVN

TCVN 330-1986 Round nuts with radially spacrd holes

GSO

GSO ISO 2541:2013 Centre drills for centre holes with radius form -- Type R
GSO ISO 16833:2014 Road vehicles -- Wheels -- Measurement of radial and lateral run-out
OS GSO ISO 16833:2014 Road vehicles -- Wheels -- Measurement of radial and lateral run-out

American National Standards Institute （ANSI)

ANSI/EIA/TIA 455-167A:1992 Mode Field Diameter Measurement - Variable Aperture Method in the Farfield
ANSI/TIA/EIA 455-134-1996 Measurement of Connector Ferrule Hole Inside Diameter
ANSI/ABMA/ISO 15242-2:2012 Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface
ANSI/TIA/EIA 455-135-1996 Measurement of Connector Ferrule Inside and Outside Diameter Circular Runout
ANSI/ABMA/ISO 15242-4:2012 Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
ANSI/EIA/TIA 455-177A:1992 Numerical Aperture Measurement of Graded-Index Optical Fibers

American Society of Mechanical Engineers (ASME)

ASME MFC-14M-1995 Measurement of fluid flow using small bore precision orifice meters
ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters

American Bearing Manufacturers Association

ABMA 15242-2-2012 Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface
ABMA 15242-2-2016 Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface

Society of Automotive Engineers (SAE)

SAE ARP5448/8A-2018 Plain Spherical Bearing Radial and Axial Clearance Measurement
SAE J1971-2000 Radial Lip Seal Torque—Measurement Method and Results
SAE ARP5448/8-2001 Plain Spherical Bearing Radial and Axial Clearance Measurement

ABMA - American Bearing Manufacturers Association

15242-2-2012 Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface
15242-2-2016 Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface
15242-4-2018 Rolling Bearings - Measuring Methods For Vibration - Part 4: Radial Cylindrical Roller Bearings With Cylindrical Bore And Outside Surface

SAE - SAE International

SAE ARP5448/8A-2007 Plain Spherical Bearing Radial and Axial Clearance Measurement
SAE J1971-2002 Radial Lip Seal Torque-Measurement Method and Results
SAE J1971-1989 Radial Lip Seal Torque - Measurement Method and Results@ Recommended Practice

RO-ASRO

STAS 7653/3-1986 BALL RADIAL BEARINGS Measuring method of vibrations level
STAS 10834-1977 RADIAL FANS Acoustic testing methods

TIA - Telecommunications Industry Association

TIA-455-7-1996 FOTP-7 Numerical Aperature of Step-Index Multimode Optical Fibers by Output Far-Field Radiation Pattern Measurement

PL-PKN

PN M55551-03-1985 Metal cutting machin? tools ethods of measurement of adial runout

ES-UNE

UNE-EN 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement

SCC

CEI EN 60793-1-43:2015 Optical fibres Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
DANSK DS/EN 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
BS 3321:1960 Method for the measurement of the equivalent pore size of fabrics (bubble pressure test)
VDI/VDE 2631 BLATT 4-2014 Form test — Determination of the radial rotary guide deviation
DIN EN 60793-1-43 E:2013 Draft Document - Optical fibres - Part 1-43: Measurement methods - Numerical aperture measurement (IEC 86A/1519/CD:2013)

International Organization for Standardization (ISO)

ISO 15242-4:2017 Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
ISO 15242-4:2007 Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
ISO 16833:2006 Road vehicles - Wheels - Measurement of radial and lateral run-out

European Committee for Electrotechnical Standardization（CENELEC）

EN 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement

Indonesia Standards

SNI 08-4418-1997 Test method for pore size of geotextile

IETF - Internet Engineering Task Force

RFC 5496-2009 The Reverse Path Forwarding (RPF) Vector TLV
RFC 7891-2016 Explicit Reverse Path Forwarding (RPF) Vector

VDI - Verein Deutscher Ingenieure

VDI/VDE 2631 Blatt 4-2013 Formpruefung - Ermittlung der radialen Drehfuehrungsabweichung

Danish Standards Foundation

DS/EN 60793-1-43:2002 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture

CENELEC - European Committee for Electrotechnical Standardization

EN 60793-1-43:2002 Optical Fibres Part 1-43: Measurement Methods and Test Procedures - Numerical Aperture

AT-ON

ONORM M 6780-1996 Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears

SE-SIS

SIS SMS 2852-1971 Dust separating. Duct apertures for dust measurement

International Telecommunication Union (ITU)

ITU-R SM.2061-0-2014 Test procedure for measuring direction finder immunity against multi-path propagation
ITU-R SM.2061-0 SPANISH-2014 Test procedure for measuring direction finder immunity against multi-path propagation

AGMA - American Gear Manufacturers Association

93FTM6-1993 Effect of Radial Runout on Element Measurements

American Gear Manufacturers Association

AGMA 93FTM6-1993 Effect of Radial Runout on Element Measurements

Defense Logistics Agency

DLA A-A-59581 C-2008 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, BORE DIAMETERS UNDER 10 MM

ZA-SANS

SANS 60793-1-43:2001 Optical fibres Part 1-43: Measurement methods and test procedures - Numerical aperture

RU-GOST R

GOST 14865-1978 Setting rings for internal measuring instruments. Specifications
GOST 8.309-1978 State system for ensuring the uniformity of measurements. Highly directional antennas. The technique of measurements for determining parameters by the aperture field

German Institute for Standardization

DIN 3977:1981-02 Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears