Calibration pH6.86 standard calibration solution composition

Calibration pH6.86 standard calibration solution composition, Total:393 items.

The international standard classification for "Calibration pH6.86 standard calibration solution composition" includes: Mechanical testing , Application of statistical methods , Chemical analysis , Chemical reagents , Electricity. Magnetism. Electrical and magnetic measurements .

The Chinese standard classification for "Calibration pH6.86 standard calibration solution composition" includes: Pressure vessel , Length Measurement , Chemical Measurement , Force and deformation test instrument , Mathematics , Industrial gas and chemical gas , Standardization and Quality Management , Electromagnetic Measurement , Basic standards and general methods on chemical fertilizers , Medical laboratory equipment .

Taiwan Provincial Standard of the People's Republic of China

CNS 6840-1980 Standard Liquid for Calibrating Viscometers
CNS 12470-1988 Manganese Standard Solution
CNS 13467-1995 Zinc Standard Solution
CNS 13466-1995 Copper Standard Solution
CNS 13472-1995 Iron Standard Solution
CNS 13471-1995 Lead Standard Solution
CNS 13469-1995 Nickel Standard Solution
CNS 12467-1988 Chromium Standard Solution
CNS 13468-1995 Cadmium Standard Solution
CNS 13470-1995 Cobalt Standard Solution
CNS 13473-1995 Bismuth Standard Solution

Professional Standard - Aerospace

QJ 2040.1-1991修改单 Calibration method for standard leak Absolute calibration method
QJ 2040.1-1991 Calibration method for standard leak Absolute calibration method
QJ 2040.2-1991修改单 Calibration methods for standard leaks versus calibration methods
QJ 3088-1999 Calibration Method for Positive Presure Standard Leak Hole
QJ 2040.2-1991 Calibration methods for standard leaks versus calibration methods

Professional Standard - Military and Civilian Products

WJ 1637-1986 Standard solution preparation and calibration (restricted standard)

Military Standard of the People's Republic of China-General Armament Department

GJB 9120-2017 Military Length Baseline Calibration Standard
GJB 1886A-2019 Preparation and standardization for standard solutions
GJB 1886-1994 Preparation and calibration of standard solutions

National Metrological Technical Specifications of the People's Republic of China

JJF(机械) 002-2008 DC Standard Current Source Calibration Specifications
JJF(机械) 039-2008 Calibration Specifications for High Voltage Standard Capacitors
JJF(纺织) 034-2012 Calibration Specification for the Metrological Verification Standard of Textile Yarn Evenness Tester.Capacitance Method
JJF(纺织) 055-2006 Standard Light Box Calibration Specifications
JJF 1652-2017 Calibration Specification for Standard Tapping Machines
JJF 1917-2021 Calibration Specification for Micropattern Standards
JJF 1709-2018 Calibration Specification for Standard Glass Floats
JJF 1796-2020 Calibration Specification of Retroreflective Standards
JJF(纺织)034-2012 Calibration Specification for the Metrological Verification Standard of Textile Yarn Evenness Tester—Capacitance Method
JJF(纺织)055-2012 Calibration Specification for Standard Light Sources Boxes
JJF 1956-2021 Calibration Specification for Hydrogen Atomic Frequency Standards
JJF(纺织) 055-2012 Calibration Specification for Standard Light Sources Boxes
JJF 1485-2014 Calibration Specification for Roundness Flick Calibration Standard
JJF 1461-2014 Calibration specification for low power transfer standard
JJF(纺织) 034-2006 Calibration specification for measurement verification standard of capacitive dryness meter
JJF(纺织)055-2023 Calibration Specification for Standard Color Assessment Cabinets
JJF 1638-2017 Calibration Specification for Multifunction Standard Sources
JJF 1564-2016 Calibration Specification for Temperature and Humidity Standard Chambers
JJF 1129-2005 Calibration Specification of Urine Analyzers
JJF 1750-2019 Calibration Specification for Infrared Standard Filter
JJF(纺织) 055-2023 Standard light source box calibration specifications
JJF 1546-2015 Calibration Specification for Retroreflective Standard Plates
JJF 1735-2018 Calibration Specification for High Frequency Q Value Standard Coil Sets
JJF(纺织) 018-2006 Calibration Specifications for Standard Force Measuring Lever
JJF 1096-2002 Calibration Specification for Calibrator of Extensometers
JJF 1958-2021 Calibration Specification for Cesium Atomic Frequency Standards
JJF 1957-2021 Calibration Specification for Rubidium Atomic Frequency Standards
JJF 1859-2020 Calibration Specification for Standard Ball Bars
JJF(建材) 106-2019 Cement Standard Sieve Calibration Specification
JJF 1990-2022 Calibration Specification for Standard Integrating Sphere Sources
JJF 1251-2010 Calibration Specification for Measuring System of Coordinate Position

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15000.9-2004 Directives for the work of reference materials（9）—Calibration in analytical chemistry and use of certified reference materials
GB/T 10628-2008 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
GB/T 22554-2010 Linear calibration using reference materials
GB/T 36412-2018 Verification and calibration of force standard machines

Group Standards of the People's Republic of China

T/HSCA 001-2017 Standards for the construction of sports fields with synthetic material surfaces in schools
T/WFJZLHH 0003-2022 Certification Standards for Home-School Co-education Instructors
T/CGDF 00002-2019 Evaluation Standard for Green School
T/SMA 0034-2023 Calibration Specification for Coordinate Measuring System By Transfer Station ——Based on Target Aiming Part
T/CHES 32-2019 Evaluation criteria for water-saving colleges and universities

National Metrological Verification Regulations of the People's Republic of China

JJG 533-2007 Verification Regulation for Calibrator of Standard Analogue Strain Quantity
JJG 417-1986 Calibration for Ge-γ-Ray Spectrometer by 152 Eu Point γ-Ray Standard Source
JJG 533-1988 Verification Regulation for Calibrator of Standard Analogue Strain Quantity

未注明发布机构

ASTM RR-E37-1007 1984 E1582-Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM RR-E37-1011 1990 E1363-Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM F658-00a(2006) Standard Practice for Calibration of a Liquid-Borne Particle Counter Using an Optical System Based Upon Light Extinction
ASTM RR-E37-1046 2015 E2603-Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM RR-E37-1050 2010 E2744-Standard Test Method for Pressure Calibration of Thermal Analyzers

Professional Standard - Chemical Industry

HG/T 2843-1997 Chemical fertilizer Products-standard volumetric、standard、reagent and indicator solutions for chemical analysis

Professional Standard - Agriculture

357药典三部-2020 Reagent Test Solution Standard 8006 Titrant

国家药监局

YY/T 0701-2021 Calibrator for hematology analyzer

Professional Standard - Electricity

DL/T 1368-2014 Calibration Specifications for Power Quality Calibrator

Professional Standard - Urban Construction

GB/T 51356-2019 Assesment standard for great campus

Korean Agency for Technology and Standards (KATS)

KS A 5103-1986 Standard liquids for calibrating viscometers
KS A 5103-1993 Standard liquids for calibrating viscometers
KS A 5103-1993(2018) Standard liquids for calibrating viscometers
KS A 5103-2023 Standard liquids for calibrating viscometers
KS A ISO 11095:2012 Linear calibration based on standard samples
KS A ISO 11095:2007 Linear calibration using reference materials
KS M 1040-2009 Reference material-Standard solution-Manganese
KS M 1054-2010 Reference material-Standard solution-Sodium
KS M 1055-2010 Reference material-Standard solution-Potassium
KS I ISO 16144:2009 Hydraulic fluid power－Calibration of liquid automatic particle counters－Procedures used to certify the standard reference material SRM 2806
KS I ISO 16144-2009(2019) Hydraulic fluid power－Calibration of liquid automatic particle counters－Procedures used to certify the standard reference material SRM 2806
KS M 1054-2020 Reference material — Standard solution — Sodium
KS M 1007-2008 Lead standard solution
KS M 1040-2013 Reference material－Standard solution－Manganese
KS F 2323-2014 Standard methods for calibration of mechanical soil compactors
KS A ISO 18213-2:2012 Nuclear fuel technology-Tank calibration and volume determination for nuclear materials accountancy-Part 2:Data standardization for tank calibration
KS M 2200-1996 Standard volume correction table for tar and coal-tar pitch
KS I ISO TR 12148-2011(2016) Natural gas－Calibration of chilled mirror type instruments for hydrocarbon dewpoint(liquid formation)
KS Q ISO 11095:2012 Linear calibration using reference materials
KS M 1008-2008 Chromium standard solution
KS M 1002-2008 Cadmium standard solution
KS M 1046-2009 Reference materials－Standard solution－Ammonium ion
KS M 1023-2009 Magnesium standard solution
KS M 1006-2008 Cobalt standard solution
KS M 1001-2008 Zinc standard solution
KS M 1017-2008 Arsenic standard solution
KS M 1010-2008 Bismuth standard solution
KS M 1004-2008 Copper standard solution
KS M 1009-2008 Antimony standard solution

Japanese Industrial Standards Committee (JISC)

JIS Z 8809:2000 Standard liquids for calibrating viscometers
JIS Z 8809:2011 Standard liquids for calibrating viscometer
JIS Z 8809:1992 Standard liquids for calibrating viscometers
JIS Z 8809 ERRATUM 1:2000 Standard liquids for calibrating viscometers (Erratum 1)
JIS B 7731:2000 Shore hardness test -- Calibration of reference blocks
JIS B 7736:2017 Brinell hardness test -- Calibration of reference blocks
JIS B 7736:1999 Brinell hardness test -- Calibration of reference blocks
JIS A 3301:1993 Design standards for wooden construction of school buildings

KR-KS

KS A 5103-1993(2023) Standard liquids for calibrating viscometers

American Society for Testing and Materials (ASTM)

ASTM E1840-96(2007) Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM E1840-96 Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM C1426-14(2020) Standard Practices for Verification and Calibration of Polarimeters
ASTM E1840-96(2014) Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM E1582-04 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM D4178-82(1999) Standard Practice for Calibrating Moisture Analyzers
ASTM E1582-10 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E2488-22 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
ASTM E1582-14 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1582-00 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM D7642-12 Standard Practice for Establishment of Calibration Cottons for Cotton Classification Instruments
ASTM G138-06 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM E2719-09(2022) Standard Guide for Fluorescence—Instrument Calibration and Qualification
ASTM D6782-04 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM E1840-96(2022) Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM D6782-19 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D8537-23 Standard Guide for Analysis of Calibration Data for Nuclear Instruments
ASTM D6782-05 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM E2719-09 Standard Guide for Fluorescence x2014; Instrument Calibration and Qualification
ASTM D4178-23 Standard Practice for Calibrating Moisture Analyzers
ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM G138-03 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM E126-19 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM D4178-82(2017) Standard Practice for Calibrating Moisture Analyzers
ASTM D5011-17 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
ASTM E2488-09 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
ASTM D4178-82(2012) Standard Practice for Calibrating Moisture Analyzers
ASTM D4444-08 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
ASTM D4444-13 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
ASTM F78-97 Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM D5011-92(2003) Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
ASTM G138-96 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM A959-04 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
ASTM E2744-10(2015) Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-21 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM D3195/D3195M-10(2015) Standard Practice for Rotameter Calibration
ASTM E2719-09(2014) Standard Guide for Fluorescencemdash;Instrument Calibration and Qualification
ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM D4444-13(2018) Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
ASTM E1840-96(2002) Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E542-00 Standard Practice for Calibration of Laboratory Volumetric Apparatus
ASTM F1317-98(2019) Standard Test Method for Calibration of Microwave Ovens
ASTM E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM D3195-90(1998)e1 Standard Practice for Rotameter Calibration
ASTM E542-01(2007) Standard Practice for Calibration of Laboratory Volumetric Apparatus
ASTM D6782-13 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM E2206-11(2015) Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E306-71(1976)e1 Method for Absolute Calibration of Reflectance Standards
ASTM D2162-14 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM D2162-06 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM D2162-13 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM E1079-10 Standard Practice for Calibration of Transmission Densitometers
ASTM E2603-15 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM E2488-09(2014) Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
ASTM D3796-09(2016) Standard Practice for Calibration of Type S Pitot Tubes
ASTM D2162-17 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM F1317-98(2012) Standard Test Method for Calibration of Microwave Ovens
ASTM E799-92(1998) Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
ASTM E2038-99 Standard Test Method for Temperature Calibration of Dielectric Analyzers
ASTM E200-23 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E2206-21 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E2206-06 Standard Test Method for Force Calibration Of Thermomechnical Analyzers
ASTM D1401-12e1 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM E2038-99(2004) Standard Test Method for Temperature Calibration of Dielectric Analyzers
ASTM D7642-12(2020) Standard Practice for Establishment of Calibration Cottons for Cotton Classification Instruments
ASTM D4307-17 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM E542-01 Standard Practice for Calibration of Laboratory Volumetric Apparatus
ASTM E1079-05 Standard Practice for Calibration of Transmission Densitometers
ASTM E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2428-15 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
ASTM E2428-14 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1362-10 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
ASTM D3025-07(2012) Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards
ASTM D3025-07(2021) Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards
ASTM E908-98(2018) Standard Practice for Calibrating Gaseous Reference Leaks
ASTM E2428-22 Standard Practice for Calibration and Verification of Elastic Torque Measurement Standards
ASTM G138-12 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM E2975-16 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
ASTM E126-12 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E126-13a Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E908-98(2022) Standard Practice for Calibrating Gaseous Reference Leaks
ASTM E2574/E2574M-17 Standard Test Method for Fire Testing of School Bus Seat Assemblies
ASTM E2975-16e1 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
ASTM E1363-18 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E2574/E2574M-17(2021) Standard Test Method for Fire Testing of School Bus Seat Assemblies
ASTM E1363-03 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1860-13(2018) Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM D2162-99(2004) Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM E1363-16 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1363-23 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E799-03(2020)e1 Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
ASTM E1860-23 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM E1363-08 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM D1401-18b Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D2162-99e1 Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM E2623-08 Standard Practice for Reporting Temperature Calibrations
ASTM E1860-13 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM D1401-18 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D1401-18a Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM G138-12(2020)e1 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM D2162-21 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM E549-87(1998) Standard Guide for Preparing Field Sprayer Calibration Procedures
ASTM C1130-90(2001) Standard Practice for Calibrating Thin Heat Flux Transducers
ASTM E1951-14 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM D2799-23 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM D1401-12 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM E1951-02(2007) Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM E1363-13 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM D3025-86(1999) Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards
ASTM D6046-98a Standard Classification of Hydraulic Fluids for Environmental Impact
ASTM E1079-00 Standard Practice for Calibration of Transmission Densitometers
ASTM E1079-16 Standard Practice for Calibration of Transmission Densitometers
ASTM E2623-14(2021) Standard Practice for Reporting Thermometer Calibrations
ASTM E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1867-22 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E549-87(2022) Standard Guide for Preparing Field Sprayer Calibration Procedures
ASTM E2883-13(2019) Standard Guide for Evaluation and Calibration, Continuous Friction Measurement Equipment (CFME)
ASTM D1401-19 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM E908-98(2004) Standard Practice for Calibrating Gaseous Reference Leaks
ASTM E549-87(2018) Standard Guide for Preparing Field Sprayer Calibration Procedures
ASTM D3025-01 Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards
ASTM E1362-99 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
ASTM D6046-02(2006) Standard Classification of Hydraulic Fluids for Environmental Impact
ASTM D6782-02 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D6046-02 Standard Classification of Hydraulic Fluids for Environmental Impact
ASTM D3796-09(2024) Standard Practice for Calibration of Type S Pitot Tubes
ASTM E4-01 Standard Practices for Force Verification of Testing Machines
ASTM E2113-02 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM D3195/D3195M-10(2023) Standard Practice for Rotameter Calibration
ASTM E2623-14 Standard Practice for Reporting Thermometer Calibrations
ASTM E1079-21 Standard Practice for Calibration of Transmission Densitometers
ASTM E908-98 Standard Practice for Calibrating Gaseous Reference Leaks
ASTM E1867-97 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-18 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM D6046-17 Standard Classification of Hydraulic Fluids for Environmental Impact
ASTM E2975-23 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
ASTM E549-87(2008) Standard Guide for Preparing Field Sprayer Calibration Procedures
ASTM D7759-12a Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
ASTM D775-80(1986) Nuclear Surface Moisture and Density Meter Calibration Standard Guide
ASTM E1867-16 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM ISO/ASTM 51261-02 Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
ASTM D3195-90(2004) Standard Practice for Rotameter Calibration
ASTM E2623-08e1 Standard Practice for Reporting Thermometer Calibrations
ASTM D6046-02(2012) Standard Classification of Hydraulic Fluids for Environmental Impact
ASTM E4-99 Standard Practices for Force Verification of Testing Machines
ASTM E1781-98(2003)e1 Standard Practice for Secondary Calibration of Acoustic Emission Sensors
ASTM D7759/D7759M-21 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
ASTM D3195/D3195M-10 Standard Practice for Rotameter Calibration
ASTM E542-01(2012) Standard Practice for Calibration of Laboratory Volumetric Apparatus
ASTM D3049-89(1996)e1 Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
ASTM E1867-11 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1867-01 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM D7438-20 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
ASTM E968-02 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E1867-06 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM D2799-21 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM D5981-96(2008) Standard Guide for Calibrating a Ground-Water Flow Model Application
ASTM E1935-97(2013) Standard Test Method for Calibrating and Measuring CT Density
ASTM E2603-15(2023) Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM E2206-02 Standard Method for Force Calibration Of Thermomechnical Analyzers
ASTM D1401-10 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM C1130-21 Standard Practice for Calibrating Thin Heat Flux Transducers
ASTM E1106-86(1992)e1 Standard Method for Primary Calibration of Acoustic Emission Sensors
ASTM E1106-86(1997) Standard Method for Primary Calibration of Acoustic Emission Sensors
ASTM D7013/D7013M-15 Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
ASTM D8392-22 Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials
ASTM D5981-96(2002) Standard Guide for Calibrating a Ground-Water Flow Model Application
ASTM E1781/E1781M-19 Standard Practice for Secondary Calibration of Acoustic Emission Sensors
ASTM E1935-97(2019) Standard Test Method for Calibrating and Measuring CT Density
ASTM D6813-02 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
ASTM E1867-13 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM C1426-14 Standard Practices for Verification and Calibration of Polarimeters

Association Francaise de Normalisation

NF T01-012:1973 Ph-measurement-standard solutions for calibration of ph-meters.
NF L09-501:1978 Standardized electrical cables. Designation and reference composition.
NF ISO 18213-2:2008 Nuclear fuel technology - Calibration and determination of vessel volume for nuclear material accounting - Part 2: data standardization for vessel calibration
NF M60-430-2*NF ISO 18213-2:2008 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy - Part 2 : data standardization for tank calibration.
NF X06-500*NF ISO 11095:1996 Linear calibration using reference materials.
FD CEN/TR 10261:2019 Steels and cast irons - European standards for the determination of chemical composition

SCC

AWWA CSC95006 Standards for Model Calibration
AWPA F4-01 Standard Volume Correction Table for Creosote-Petroleum Solutions
AWPA F4-00 Standard Volume Correction Table for Creosote-Petroleum Solutions
AASHTO R 61-2012(2020) Standard Practice for Establishing Requirements for Equipment Calibrations, Standardizations, and Checks
AASHTO PP 57-2006 Standard Practice for Establishing Requirements for and Performing Equipment Calibrations, Standardizations, and Checks
MIL MIL-F-45687-1961 FIRE CONTROL ELECTRONIC CALIBRATION STANDARDS, PACKAGING OF
DANSK DS/CEN/TR 10261:2018 Iron and steel – European standards for the determination of chemical composition
SN-CEN/TR 10261:2018 Iron and steel — European standards for the determination of chemical composition
BS PD CEN/TR 10261:2023 Iron and steel. European standards for the determination of chemical composition
SN-CEN/TR 10261:2023 Iron and steel — European standards for the determination of chemical composition
SN-CEN/TR 10261:2013 Iron and steel — European standards for the determination of chemical composition
BS PD ISO/TS 19657:2017 Definitions and technical criteria for food ingredients to be considered as natural
CAN/ULC-S560-2006(R2016) STANDARD FOR CATEGORY 3 AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATES
DANSK DS/ISO/TS 19657:2017 Definitions and technical criteria for food ingredients to be considered as natural
BS PD CEN/TR 10261:2013 Iron and steel. European standards for the determination of chemical composition
UNE-ENV 13282:2001 Hydraulic road binders - Composition, specifications and conformity criteria.
BS PD CEN/TR 10261:2018 Iron and steel. European standards for the determination of chemical composition
BS DD ENV 13282:2000 Hydraulic road binders. Composition, specifications and conformity criteria
NS-ENV 13282:2000 Hydraulic road binders — Composition, specifications and conformity criteria
DIN V ENV 13282:2002 Hydraulic road binders - Composition, specifications and conformity criteria; German version ENV 13282:2000
CAN/ULC S560-1998 Standard for Category 3 Aqueous Film-Forming Foam (AFFF) Liquid Concentrates
AASHTO T 155-2022 Standard Method of Test for Water Retention by Liquid Membrane-Forming Curing Compounds for Concrete (ASTM Designation: C156-11)
ASHRAE 41.8-2023 Standard 41.8-2023 -- Standard Methods for Liquid Flow Measurement (ANSI Approved)
05/30133471 DC ISO 18213-2. Nuclear fuel technology. Tank calibration and volume determination for nuclear materials accountancy. Part 2. Data standardization for tank calibration

TH-TISI

TIS 1049-1991 Standard for school shoes

YU-JUS

JUS H.G0.002-1988 Reagents. Preparation and storage of standard reference buffer solutions for calibration of pH-meters
JUS H.G0.001-1987 Reagents. Preparation, standard iza ti on and storage of standard volumetric solutions for chemical analysis

SAE - SAE International

SAE ARP1192C-2000 Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard
SAE ARP1192B-1987 Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard

Society of Automotive Engineers (SAE)

SAE ARP1192B-1991 PROCEDURE FOR CALIBRATION AND VERIFICATION OF A LIQUIDBORNE PARTICLE COUNTER: AN ABSOLUTE STANDARD
SAE ARP1192A-1978 PROCEDURE FOR CALIBRATION AND VERIFICATION OF LIQUID-BORNE PARTICLE COUNTER: AN ABSOLUTE STANDARD

German Institute for Standardization

DIN 19266:2015 pH measurement - Reference buffer solutions for the calibration of pH measuring equipment
DIN 19266:2000 pH measurement - Referenz buffer solutions for the calibration of pH measuring equipment
DIN ISO 11095:2008 Linear calibration using reference materials (ISO 11095:1996); Text German and English

IN-BIS

IS 10166-1982 Calibration method for standard test blocks for calibrating hardness testing equipment

CN-STDBOOK

图书 3-8333 Upgrading of school management standards - making every school a self-organizing school

Consumer Electronics Association （U.S.)

CEA-706-A-2004 Component Marking Standard NO LONGER AVAILABLE ?CONTACT WWW.MHIA.ORG TO ORDER

International Organization for Standardization (ISO)

ISO/CD TS 13604:2023 Underwater acoustics — Standard-target method of calibrating active sonars for imaging and measuring scattering
ISO/TR 16144:2002 Hydraulic fluid power - Calibration of liquid automatic particle counters - Procedures used to certify the standard reference material SRM 2806
ISO/TS 19657:2017 Definitions and technical criteria for food ingredients to be considered as natural
ISO 16063-45:2017 Methods for the calibration of vibration and shock transducers - Part 45: In-situ calibration of transducers with built in calibration coil
ISO 18213-2:2007 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy - Part 2: Data standardization for tank calibration
ISO 11095:1996 Linear calibration using reference materials
ISO 6926:2016 Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
ISO/R 640:1967 Calibration of standardized blocks to be used for Vickers hardness testing machines

AR-IRAM

IRAM 5039-1949 Calibrator logo

ZA-SANS

SANS 604:2007 Calibration in analytical chemistry and use of certified reference materials

RU-GOST R

GOST R 54012-2010 Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806

American National Standards Institute （ANSI)

PD CEN/TR 10261:2023 Iron and steel. European standards for the determination of chemical composition (British Standard)
ANSI/ASA S12.60-1-2010 Acoustical Performance Criteria, Design Requirements, and Guidelines for Schools, Part 1: Permanent Schools

U.S. Air Force

AIR FORCE MIL-STD-1839 C-2000 CALIBRATION AND MEASUREMENT REQUIREMENTS, STANDARD PRACTICE FOR

RO-ASRO

STAS SR ISO 3323:1994 Aircraft - Hydraulic components - Marking to indicate fluid for which component is approved
STAS 6725-1968 STAS standard tolerances and calibration. Tolerances and calibrations for sizes 500-1000mm

GSO

OS GSO ISO Guide 32:2009 Calibration in analytical chemistry and use of certified reference materials
GSO ISO/TS 19657:2021 Definitions and technical criteria for food ingredients to be considered as natural
OS GSO ISO 18213-2:2013 Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 2: Data standardization for tank calibration
BH GSO ISO/TS 19657:2022 Definitions and technical criteria for food ingredients to be considered as natural
GSO ASTM E74:2022 Standard Practices for Calibration and Verification for Force-Measuring Instruments
BH GSO ASTM E74:2023 Standard Practices for Calibration and Verification for Force-Measuring Instruments

British Standards Institution (BSI)

BS 2M 49:1997 Aircraft. Hydraulic components. Marking to indicate fluid for which component is approved
BS ISO 16128-2:2017 Cosmetics. Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients. Criteria for ingredients and products
PD ISO/TS 19657:2017 Definitions and technical criteria for food ingredients to be considered as natural
BS ISO 16128-2:2017+A1:2022 Cosmetics. Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients - Criteria for ingredients and products
BS ISO 16063-45:2017 Methods for the calibration of vibration and shock transducers. Part 45: In-situ calibration of transducers with built in calibration coil
DD CEN/TS 15674:2007 Air quality — Measurement of stationary source emissions — Guidelines for the elaboration of standardised methods

AASHTO - American Association of State Highway and Transportation Officials

R 61-2012 Standard Practice for Establishing Requirements for Equipment Calibrations@ Standardizations@ and Checks
PP 57-2006 Standard Practice for Establishing Requirements for and Performing Equipment Calibrations@ Standardizations@ and Checks

SE-SIS

SIS SS 11 03 32-1982 Hardness test - Brinell test - Direct verification of standardizing machine for calibration of standardized blocks

The American Road & Transportation Builders Association

AASHTO T 282-2001 Standard Method of Test for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
AASHTO R 61-2012(R2020) Standard Practice for Establishing Requirements for Equipment Calibrations, Standardizations, and Checks
AASHTO PP 57-2006(R2009) Standard Practice for Establishing Requirements for and Performing Equipment Calibrations, Standardizations, and Checks

API - American Petroleum Institute

API MPMS 11.2.3M-1984 Manual of Petroleum Measurement Standards Chapter 11.2.3M - Water Calibration of Volumetric Provers
API MPMS 4.9.2-2005 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration (Firs
API MPMS 11.2.3-1984 Manual of Petroleum Measurement Standards Chapter 11.2.3 - Water Calibration of Volumetric Provers (R 1996)
API MPMS 4.9.4-2010 Manual of Petroleum Measurement Standards Chapter 4—Proving Systems Section 9—Methods of Calibration for Displacement and Volumetric Tank Provers Part 4—Determination of the Volume of Displacement and Tank Provers by the Gravimetric Method of Calibration

CEN - European Committee for Standardization

PD CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition

U.S. Military Regulations and Norms

ARMY MIL-F-45687 VALID NOTICE 2-2013 Fire Control Electronic Calibration Standard, Packaging of

European Committee for Standardization (CEN)

CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
PD CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
EN 13282-2:2015 Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition@ specifications and conformity criteria

AENOR

UNE 82132:2005 IN Calibration in analytical chemistry and use of certified reference materials

Institute of Electrical and Electronics Engineers (IEEE)

IEEE/ANSI N42.13-2004 American National Standard Calibration and Usage of "Dose Calibrator" Ionization Chambers for the Assay of Radionuclides
IEEE/ANSI N42.13-1986 American National Standard Calibration and Usage of "Dose Calibrator" Ionization Chambers for the Assay of Radionuclides
ANSI N42.13-2004 (Reaffirmation of ANSI N42.13-1986) American National Standard Calibration and Usage of "Dose Calibrator" Ionization Chambers for the Assay of Radionuclides
ANSI Std N42.13-1986 American National Standard Calibration and Usage of "Dose Calibrator" Ionization Chambers for the Assay of Radionuclides
IEC/IEEE P61869-21/CDV, 2024 IEEE Draft Standard Uncertainty Evaluation in the Calibration of Instrument Transformers

Danish Standards Foundation

DS/CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition

CZ-CSN

CSN ISO 5436:1994 Calibration specimens.Stylus instruments.Types,calibration and use of specimens
CSN ISO 6145-1:1994 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods

Lithuanian Standards Office

LST L ENV 13282-2007 Hydraulic road binders - Composition, specifications and conformity criteria

IT-UNI

UNI ISO 389:1977 acoustics. Zero of the standard reference for calibration of pure tone audiometers

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 173-1959 Standards on Navigation Aids: Direction Finder Measurements (Correction)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD12-6-1991 Interface Standard for Semicustom Integrated Circuits

BE-NBN

NBN T 97-109-1984 Gas analysis - Determination of composition of calibration gas mixtures -Comparison methods

BR-ABNT

ABNT NBR ISO 16128-2:2020 Cosmetics - Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients Part 2: Criteria for ingredients and products

Others: