Thermal Imaging Mode White Hot Mode Black Hot Mode

Thermal Imaging Mode White Hot Mode Black Hot Mode, Total:158 items.

The international standard classification for "Thermal Imaging Mode White Hot Mode Black Hot Mode" includes: Other kitchen equipment , Moulding equipment , Quality management and quality assurance , Non-destructive testing , Electric heaters .

The Chinese standard classification for "Thermal Imaging Mode White Hot Mode Black Hot Mode" includes: Building materials products in general , Mould , Standardization and Quality Management , Basic standards and general methods , Technical management , Moulds , Household electric heating appliances .

Group Standards of the People's Republic of China

T/CECA G 0175-2022 Code for design, installation and acceptance of modular pressurized air source heat pump domestic hot water system
T/QGCML 4495-2024 Optical Gas Thermal Infrared Thermal Imager Components for Handheld Photoelectric Measurement
T/YCST 001-2022 Technical specification for modular assembly sound insulation and heat insulation floor radiant heating
T/PTSHOES SM002-2020 Hot pressing mold for rubber and plastic sole Two plate rectangular mold
T/CAB 0150-2022 nstant-heating and cooling water boiler
T/CECA-G 175-2022 Code for design, installation and acceptance of modular pressurized air source heat pump domestic hot water system
T/CECA-G 0175-2022 Code for design, installation and acceptance of modular pressurized air source heat pump domestic hot water system
T/PTSHOES 010-2021 Rubber and plastic sole hot pressing mold multi-plate rectangular mold
T/CASME 1086-2023 Thermocouple analog output module
T/CBMCA 003-2018 Modular rang hoods for integrated stoves
T/PTSHOES GS010-2021 Hot pressing mold for rubber and plastic sole Multi-plate rectangular mold
T/CASME 1078-2023 RTC thermal resistance simulation module

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38355-2019 Matrix quality management mode for success right the first time
GB/T 39164-2020 Tools for moulding—Thermal insulating sheets for injection moulds
GB/T 38883-2020 Non-destructive testing一Active thermographic testing method

未注明发布机构

DIN EN 10243-2 Ber 1:2005 Drop forgings – Dimensional tolerances – Part 2: Hot manufactured in horizontal upsetting machines
DIN EN 16905-5 E:2021-12 Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode
DIN EN 16905-5 E:2015-10 Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode

Professional Standard - Machinery

JB/T 8431-1996 Hot Forging Die Steels and Their Heat Treatment-Technical Conditions
JB/T 7646.2-2008 Stamping die shanks-Part 2:Screwed die shanks
JB/T 7646.1-2008 Stamping die shanks-Part 1:Press-fit die shanks
JB/T 6961-2017 Forging dies. lwo-roller type of cross wedge rolling dies. Structural types and dimensions
JB/T 7646.1-1994 Die handle Press-in type die handle
JB/T 7646.6-1994 Die handle push type movable die handle
JB/T 7646.2-1994 Die handle screw-in die handle

Professional Standard - Electron

SJ/T 10341.2-1993 Holders for sliding guide die sets of fine blanking die with sliding punch - Die holders of diagonal pillar sets for inlay die plate
SJ/T 10341.12-1993 Holders for anti-friction bearing die sets of fine blanking die with sliding punch-Die holders of diagonal pillar set for inlay die plate
SJ/T 10341.18-1993 Holders for anti-friction bearing die sets of fine blanking die with sliding punch-Punch holders of center pillar set for inlay die plate
SJ/T 10341.1-1993 Holders for sliding guide die sets of fine blanking die with sliding punch-Punch holders of diagonal pillar sets for inlay die plate
SJ/T 10341.3-1993 Holders for sliding guide die sets of fine blanking die with sliding punch-Punch holders of diagonal pillar set for laid die plate
SJ/T 10339.9-1993 Anti friction bearing die sets of fine blanking die with sliding punch - Center pillar sets for laid die plate
SJ/T 10341.21-1993 Holders for anti - Friction bearing die sets of fine blanking die with sliding punch - Die holders of center pillar set for laid die plate
SJ/T 10339.5-1993 Anti friction bearing die sets of fine blanking die with sliding punch - Diagonal pillar sets for inlay die plate
SJ/T 10341.13-1993 Holders for anti-friction bearing die sets of fine blanking die with sliding punch-Punch holders of diagonal pillar set for laid die plate
SJ 2638.1-1985 Cold press dies - Shank of press fit
SJ/T 10341.4-1993 Holders for sliding guide die sets of fine blanking die with sliding punch - Die holders of diagonal pillar set for inlay laid plate
SJ/T 10339.8-1993 Anti friction bearing die sets of fine blanking die with sliding punch - Center pillar sets for inlay die plate
SJ/T 10341.19-1993 Holders for anti-friction bearing die sets of fine blanking die with sliding punch-Die holders of center pillar set for inlay die plate
SJ/T 10341.11-1993 Holders for anti-friction bearing die sets of fine blanking die with sliding punch-Punch holders of diagonal pillar set for inlay die plate
SJ/T 10339.1-1993 Sliding guide die sets of fine blanking die with sliding punch-Diagonal pillar sets for inlay die plate
SJ/T 10339.6-1993 Anti friction bearing die sets of fine blanking die with sliding punch-Diagonal pillar sets for laid die plate
SJ 1009-1975 Jig opened with handle-Jig sets
SJ/T 10339.2-1993 Sliding guide die sets of fine blanking die with sliding punch - Diagonal pillar sets for laid die plate
SJ 2638.2-1985 Cold press dies - Screwed shank
SJ/T 10341.20-1993 Holders for anti - Friction bearing die sets of fine blanking die with sliding punch-Punch holders of center pillar set for laid die plate
SJ/T 10341.14-1993 Holders for anti-friction bearing die sets of fine blanking die with sliding punch-Die holders of diagonal pillar set for laid die plate

Professional Standard - Aviation

HB 4563-1992 Fixed compression mold for mold base
HB 2163-1975 Mobile compression mold base
HB 2165-1975 Movable compression mold for mold base
HB 2164-1992 Movable Compression Mold Framework
HB 4561-1992 Fixed Compression Mold Base
HB 2163-1992 Movable Compression Mold Framework
HB 2166-1992 Movable Compression Mold for Formwork Matching
HB 825-1975 Combined handle
HB 2165-1992 Movable Compression Mold for Formwork Matching
HB 2164-1975 Mobile compression mold base
HB 823-1975 Press-in die handle
HB 8571-2020 Active thermography test method for aviation composite material
HB 4562-1992 Fixed compression mold base

Taiwan Provincial Standard of the People's Republic of China

CNS 12073-1987 Die Materials of Hot Forging Closed Die

工业和信息化部

JB/T 14010-2020 Stamping dies -- Hot stamping dies -- Specifications

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 26185-2010 Instantaneous water heater

工业和信息化部/国家能源局

JB/T 8431-2017 Forging dies. Steels for hot forging dies. Specifications

Anhui Provincial Standard of the People's Republic of China

DB34/T 2067-2014 Biomass Mode Compression Molding Equipment

Professional Standard - Aerospace

QJ 675-1982 Press-in die handle

British Standards Institution (BSI)

BS EN 1434-4:2007 Heat meters - Pattern approval tests
BS EN 16905-5:2017 Gas-fired endothermic engine driven heat pumps. Calculation of seasonal performances in heating and cooling mode
BS ISO/IEC 13250-5:2015 Information technology. Topic Maps. Reference model
BS EN 16905-5:2022 Gas-fired endothermic engine driven heat pumps. Calculation of seasonal performances in heating and cooling mode

Association Francaise de Normalisation

NF EN ISO 14921:2011 Thermal spraying - Procedure for applying coatings obtained by thermal spraying for mechanical parts
NF EN 17002:2018 Thermal spraying - Elements treated by thermal spraying - Thermal spraying procedure specification
NF E17-401-4:2007 Heat meters - Part 4 : pattern approval tests.
NF EN 16905-5:2022 Pompes à chaleur à moteur endothermique alimenté au gaz - Partie 5 : calcul des performances saisonnières en modes chauffage et refroidissement
NF E35-610-5*NF EN 16905-5:2017 Gas-fired endothermic engine driven heat pumps - Part 5 : calculation of seasonal performances in heating and cooling mode
NF ISO 15600:2001 Molding Tooling - Thermal Insulation Sheets in Injection Molds
NF T57-540-1*NF EN 13677-1:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1 : designation.
NF E82-002:1988 STEEL DROP FORGINGS. PRESS FORGINGS,UPSET FORGINGS,AND FORGINGS MADE ON HORIZONTAL FORGING MACHINES. DIMENSIONAL TOLERANCES.

HU-MSZT

MSZ 24-1984 Hot rolled, steel plate and extensive anti-slip patterns
MSZ 11682-1962 Plastic testing. Thermal expansion detection mode
MSZ 10906/2.lap-1963 Electrode tube power element measurement mode. Heaters and heating capacity measurements
MSZ 12000/6.lap-1968 Laboratory black coal detection. Weight detection mode

NO-SN

NS 7014-1977 Description pattern for reinforcing steel, hot-rolled deformed
NS 3058-1-1994 Enclosed wood heaters. Smoke emission. Part 1: Test facility and heating pattern

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE OR-05-10-4-2005 CFD Simulation of Heat Transfer in Compact Brazed Plate Heat Exchangers

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE BN-97-8-2-1997 Residential Vertical Geothermal Heat Pump System Models: Calibration to Data
ASHRAE LV-11-C018-2011 CFD Simulation of Single-Phase Flow in Plate Heat Exchangers
ASHRAE LV-11-003-2011 Application of a Linear Input/Output Model to Tankless Water Heaters
ASHRAE 4511-2002 A Thremal Model of Clamshell Heat Exchangers in Residential Gas Furnaces
ASHRAE LV-11-024-2011 Numerical Modeling of Thermally Enhanced Pipe Performances in Vertical Ground Heat Exchangers
ASHRAE SA-96-6-1996 Symposium on Glazing Unit Surface Temperatures: Thermography and Simulation
ASHRAE CH-99-10-2-1999 Simple Absorption Heat Pump Modules for System Simulation Programs
ASHRAE 3981-1996 Modeled and Measured Effects of Compressor Downsizing in an Existing Air Conditioner/Heat Pump in the Cooling Mode
ASHRAE NY-08-057-2008 Thermal Resistance of a Window with an Enclosed Venetian Blind: A Simplified Model
ASHRAE CH-03-8-1-2003 Two-Phase Flow Pattern@ Heat Transfer@ and Pressure Drop in Microchannel Vaporization of CO2
ASHRAE 4689-2004 Thermodynamic Modeling and Experimental Validation of Screw Liquid Chillers
ASHRAE AT-96-17-1-1996 Development of Design Model for a Rectifier in GAX Absorption Heat Pump Systems
ASHRAE DA-00-8-4-2000 Computer Simulation of Hydronic Heating/Cooling System with Embedded Pipes
ASHRAE PH-97-3-2-1997 Generalized Component Design Model by Combined Heat and Mass Transfer Analysis in NH3-H2O Absorption Heat Pump Systems
ASHRAE MN-00-14-1-2000 3-D Simulation of Thermal-Hydraulic Characteristics of Louvered Fin-and-Tube Heat Exchangers with Oval Tubes
ASHRAE 4317-1999 Short Time Step Response Factor Model for Vertical Ground Loop Heat Exchangers
ASHRAE SA-96-6-5-1996 Overview of a Project to Determine the Surface Temperatures of Insulated Glazing Units: Thermographic Measurement and Two-Dimensional Simulation
ASHRAE CH-03-9-3-2003 Whole Building Hygrothermal Simulation Model
ASHRAE AT-01-8-4-2001 Field Validation of a Short Time Step Model for Vertical Ground-Loop Heat Exchangers
ASHRAE 4651-2003 Modeling and Development of Comperssion Heat Pumps in Integrated Ventilation and Heat Supply Units for Passive Solar Houses

Society of Automotive Engineers (SAE)

SAE ARP1523B-2008 Air Mode Insulated Containers - Thermal Efficiency Requirements
SAE ARP1523C-2000 Air Mode Insulated Containers - Thermal Efficiency Requirements (Stabilized Type)

SAE - SAE International

SAE ARP1523B-2000 Air Mode Insulated Containers - Thermal Efficiency Requirements

SCC

NS 3058-1:1994 Enclosed wood heaters - Smoke emission - Part 1: Test facility and heating pattern
DIN EN 16905-5 E:2015 Draft Document - Gas-fired endothermic engine heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode; German and English version prEN 16905-5:2015
DANSK DS/EN 143003:2016 Blank Detail Specification: Directly heated negative temperature coefficient thermistors (Disk type)
BS PD ISO/TS 19130-3:2022 Geographic information. Imagery sensor models for geopositioning-Implementation schema
AENOR UNE-EN 16905-5:2017 Heat pumps driven by an endothermic gas engine. Part 5: Calculation of seasonal performances in heating and cooling mode.

ESDU - Engineering Sciences Data Unit

SPG-M5-2-2007 Modelling of shell-and-tube heat exchanger undergoing crude oil fouling.

American National Standards Institute （ANSI)

ANSI X9.100-182-2011 Bulk Image and Data Schema

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP138-1999 User Guidelines for IR Thermal Imaging Determination of Die Temperature
JEDEC JESD15-2008 Thermal Modeling Overview

AENOR

UNE-EN 16905-5:2017 Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode
UNE 28612:1988 AIR CARGO EQUIPMENT. AIR MODE INSULATED CONTAINER. THERMAL EFFICIENCY REQUIREMENTS.

German Institute for Standardization

DIN EN 16905-5:2023 Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode
DIN 61106:1983-04 System for the composition of pattern repeats
DIN 16765:2006 Compression, injection moulds and die-casting dies - Electrical connections for hot-runner moulds and mould heatings
DIN EN 143003:1997-02 Blank detail specification - Directly heated negative temperature coefficient thermistors (disk type); German version EN 143003:1991
DIN EN 16905-5:2017 Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode; German version EN 16905-5:2017
DIN 17023:2000-03 Heat treatment of ferrous metals - (WBA) Forms - Heat-treatment order
DIN 16765:2006-01 Compression, injection moulds and die-casting dies - Electrical connections for hot-runner moulds and mould heatings
DIN ISO 15600:2012-07 Tools for moulding - Thermal insulating sheets for injection moulds (ISO 15600:2000)
DIN 6858-1:2014 Quality control of multi-modal imaging - Part 1: Routine test PET/CT
DIN 6858-1:2012 Quality control of multi-modal imaging - Part 1: Routine test PET/CT

U.S. Air Force

AIR FORCE A-A-59816-2008 OPTICAL TIME DOMAIN REFLECTOMETER, SINGLE AND MULTI-MODES

European Committee for Standardization (CEN)

EN 16905-5:2017 Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode
EN 16905-5:2022 Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode
DD ENV 41 901-1987 Information Systems Interconnection: X.28- Mode Procedures; X.3 Character-Mode Access; X.28 Character-Mode Access

Lithuanian Standards Office

LST EN 143003-2001 Blank detail specification. Directly heated negative temperature coefficient thermistors (disk type)

Korean Agency for Technology and Standards (KATS)

KS B 4119-1979 Horizontal die bed for press die
KS B 4114-2016 Die blocks for closed-die press forging
KS G 6805-2011 Safety helmets
KS B 8116-1999 Instantaneous water heaters
KS B 8116-2015 Instantaneous water heaters
KS B 8116-2019 Gas burning instantaneous water heaters
KS B ISO 15600-2002(2017) Tools for moulding－Thermal insulating sheets for injection moulds
KS A ISO 12234-1:2011 Electronic still-picture imaging-Removable memory-Part 1:Basic removable-memory model

IETF - Internet Engineering Task Force

RFC 2218-1997 A Common Schema for the Internet White Pages Service

GB-REG

REG 30 CFR PART 104-2010 PATTERN OF VIOLATIONS
REG 30 CFR PART 104-2011 PATTERN OF VIOLATIONS

Aeronautical Radio Inc.

ARINC 750-3 ITEM 3.0 Modes of Operation

CZ-CSN

CSN 01 0460-1969 Pattern lettering

Government Electronic & Information Technology Association

GEIA EIA/IS-116-1996 CDIF Integrated Meta-model - State/Event Model Subject Area

American Society for Testing and Materials (ASTM)

ASTM C1044-24 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
ASTM C1044-16(2020) Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
ASTM C1044-16 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
ASTM D6982-09 Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns
ASTM D6982-22 Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns
ASTM D6982-09(2016) Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns

Standard Association of Australia （SAA）

AS P4:1968 Commercial forms

GSO

GSO ISO 15600:2014 Tools for moulding -- Thermal insulating sheets for injection moulds
NB/T 11549-2024 Standard drawings of complete modular trestle

IN-BIS

IS 4789-1979 Knife, Eye, Cataract, Grave's Pattern Specification

TIA - Telecommunications Industry Association

TSB62-3-1995 ITM-3 Mode Power Distribution and Mode Transfer Function Measurement

Others: