Laser particle size D10

Laser particle size D10, Total:34 items.

The international standard classification for "Laser particle size D10" includes: Particle size analysis. sieving .

The Chinese standard classification for "Laser particle size D10" includes: Sieving, Sieve Plate and Sieve Screen , Powder metallurgy analysis method .

National Metrological Verification Regulations of the People's Republic of China

JJG 167-2020 Laser particle size distribution analyzer

未注明发布机构

DIN ISO 13320 E:2022-05 Particle size analysis - Laser diffraction methods

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19077.1-2003 Particle size analysis-Laser diffraction method
GB/T 19077-2016 Particle size analysis―Laser diffraction methods

SCC

AS D10:1967 Classification of wheeled tractors for agricultural purposes
DANSK DS/ISO 13320:2020 Particle size analysis – Laser diffraction methods

Institute of Electrical and Electronics Engineers (IEEE)

P1635/D10/ASHARE 21/D10, December 2016 IEEE/ASHRAE Draft Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications
IEEE P1635/D10/ASHARE 21/D10, December 2016 IEEE/ASHRAE Draft Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications
P149/D10 February 2021 IEEE Draft Recommended Practice for Antenna Measurements
IEEE Std P1106/D10 Unpproved IEEE Draft Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications (Revision of IEEE 1106-1995) (Superseded by Approved IEEE Draft)
IEEE Std P693/D10 Unpproved Draft IEEE Recommended Practices for Seismic Design of Substations Replaced by the Approved IEEE Draft
IEEE Std PC37.101/D10 Unapproved IEEE Draft Guide for Generator Ground Protection (Superseded by PC37.101_D12)
IEEE Std PC37.48/D10 IEEE Draft Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories (Revision of IEEE C37.48-1997) Superseded by C37.48-2004
P1653.1/D10, October 2015 IEEE Draft Standard for Traction Power Rectifier Transformers for Substation Applications up to 1500 V DC Nominal Output
IEEE Std PC37.114/D10 Approved IEEE Draft Guide for Determining Fault Location on AC Transmission and Distribution Lines
P1559/D10, February 2022 IEEE Draft Standard for Inertial Systems Terminology
PC57.106/D10, September 2015 IEEE Draft Guide for Acceptance and Maintenance of Insulating Mineral Oil in Electrical Equipment
PC37.13/D10, December 2014 IEEE Draft Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
IEEE Std P1010/D10 Approved IEEE Draft Guide for Control of Hydroelectric Power Plants (Revision of IEEE 1010-1987) Superseded by IEEE 1010-2006
IEEE Std PC37.231/D10 Unapproved IEEE Draft Recommended Practice for Microprocessor-Based Protection Equipment Firmware Control
IEEE Std PC50.12/D10 Approved IEEE Draft Standard for Salient-Pole 50 and 60 Hz Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications Rated 5 Mva and Above Revision of ANSI C50.12-1982
IEEE Std PC50.13/D10 Approved Draft IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above (Revision of ANSI C50.13-1989)

GSO

GSO OIML D10:2010 Guidelines for the determination of calibration intervals of measuring instruments
OS GSO OIML D10:2010 Guidelines for the determination of calibration intervals of measuring instruments
BH GSO ISO 13320:2016 Particle size analysis -- Laser diffraction methods
GSO ISO 13320:2013 Particle size analysis -- Laser diffraction methods
OS GSO ISO 13320:2013 Particle size analysis -- Laser diffraction methods