The liquid line is empty

The liquid line is empty, Total:94 items.

The international standard classification for "The liquid line is empty" includes: Surgical instruments and materials , Refrigerating technology .

The Chinese standard classification for "The liquid line is empty" includes: Extracorporeal circulation, artificial organ and prosthesis device , Aircraft maintenance and management , Household air conditioning and cooling appliances , Refrigeration equipment , Pipe fittings, clamps and seals .

Group Standards of the People's Republic of China

T/HEBQIA 278-2024 Remote Liquid Supply Pipeline
T/QGCML 4169-2024 Pipeless automatic dripping machine
T/ZZB 1318-2019 Automotive air-conditioning pipe & pipe assembly

国家药监局

YY/T 1761-2021 Disinfectant for dialysis machine dialysate circuit
YY/T 1653-2020 Administration set use with infusion pump

Taiwan Provincial Standard of the People's Republic of China

CNS 4109-1977 Pipe Couplings for Hydraulic Piping (Pipe Threads)

Military Standard of the People's Republic of China-General Armament Department

GJB 380.2A-2015 Aviation Service Fluid Contamination Testing Part 2: Methods for Collecting Fluid Samples from System Pipelines

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 380.2A-2004 Contamination test method of operating fluid for aviation Part 2:Extraction of fluid samples from lines of an operating system

Professional Standard - Civil Aviation

MH/T 3005-2002 Aerispace pipelines identification

Professional Standard - Light Industry

QB/T 2533-2001 Pipework Components of Air-Conditioners

Professional Standard - Machinery

JB/T 11213-2011 Liquid-line filter and liquid-line filter-driers for refrigerant system and air conditioning
JB/T 5227.1-1991 Pipeline accessories for gas chromatograph

Professional Standard - Aviation

HB 5654～5655-1996 Aviation pipeline identification tape
HB 5654-1996 Aviation pipeline identification tape
HB 5655-1996 Aviation pipeline identification tape
HB 5653-1996 Aircraft Pipeline Identification Mark

Professional Standard - Automobile

QC/T 745-2006 Rubber pipelines for liquefied petroleum gas vehicles

Professional Standard - Medicine

YY 0267-2016 Hemodialysis and related therapies―Extracorporeal blood circuit for blood purification devices

工业和信息化部

JB/T 11213-2022 Liquid-line filter and liquid-line filter-drier for refrigerating system and air conditioning

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3682-1993 Improved Correlation for the Momentum Transfer Characteristics of Spined Pipe
ASHRAE 4482-2001 Extended Insight into the Metastable Liquid Region Behavior in an Adiabatic Capillary Tube (International Journal of HVAC&R Research)

Association Francaise de Normalisation

NF R18-701:1979 Road vehicles - Pipes for circulating coolants for air conditioning.
NF EN 16125:2019 LPG equipment and accessories - Pipe systems and supports - Liquid phase and vapor phase
NF EN 17613:2022 Equipment for liquefied petroleum gas and their accessories - Composite pipelines for LPG in liquid phase and vapor phase - Design and manufacturing
NF L40-200:1967 MARKING OF FLUID CIRCUITS IN AIRCRAFT.
NF L40-201*NF ISO 12:1988 Aerospace. Pipelines. Identification.
NF EN ISO 23500-4:2019 Preparation and quality management of hemodialysis fluids and related therapies - Part 4: concentrates for hemodialysis and related therapies
NF T47-283*NF EN 1762:2018 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
NF M88-761*NF EN 16125:2019 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
NF T47-283:2004 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification.

Korean Agency for Technology and Standards (KATS)

KS W ISO 8574-2009(2019) Aerospace－Hydraulic system tubing－Qualification tests for bent tubes
KS W ISO 8575-2009(2019) Aerospace－Fluid systems－Hydraulic system tubing
KS W ISO 8574:2009 Aerospace－Hydraulic system tubing－Qualification tests for bent tubes
KS W ISO 8575:2009 Aerospace－Fluid systems－Hydraulic system tubing
KS I ISO 16362-2020 Ambient air－Determination of particle－phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
KS I ISO 16362-2005(2020) Ambient air－Determination of particle－phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
KS W ISO 1465:2009 Aircraft-Liquid oxygen replenishment couplings-Mating dimensions

British Standards Institution (BSI)

BS ISO 8575:2016 Aerospace. Fluid systems. Hydraulic system tubing
BS ISO 8574:2008 Aerospace. Hydraulic system tubing. Qualification tests for bent tubes
BS EN 2468:2019 Aerospace series. Steel FE-PA11. Softened. Tubes. 0,5 mm ≤ a ≤ 5 mm
BS 3212:1991(2012) Specification for Flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG / air installations
BS EN ISO 23500-4:2024 Preparation and quality management of fluids for haemodialysis and related therapies - Concentrates for haemodialysis and related therapies
BS ISO 16232-1:2007 Road vehicles - Cleanliness of components of fluid circuits - Vocabulary
BS ISO 8574:2004 Aerospace. Hydraulic system tubing. Qualification tests for bent tubes
BS EN 16125:2019 LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase
BS EN ISO 23500-3:2024 Preparation and quality management of fluids for haemodialysis and related therapies - Water for haemodialysis and related therapies
BS EN 16125:2015 LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase
BS EN 1762:2003 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
BS EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification

International Organization for Standardization (ISO)

ISO 8575:2016 Aerospace - Fluid systems - Hydraulic system tubing
ISO 8574:2004 Aerospace - Hydraulic system tubing - Qualification tests for bent tubes
ISO 8575:1990 Aerospace; fluid systems; hydraulic system tubing
ISO 8574:1990 Aerospace; hydraulic system tubing; qualification tests
ISO 9538:1996 Aerospace - Hydraulic tubing joints and fittings - Planar flexure test
ISO 9538:2017 Aerospace series - Hydraulic tubing joints and fittings - Planar flexure test
ISO 1465:1989 Aircraft; liquid oxygen replenishment couplings; mating dimensions

Institute of Electrical and Electronics Engineers (IEEE)

IEC/IEEE P60076-57-1202/D2, June 2015 IEC/IEEE Approved Draft International Standard Requirements for Liquid Immersed Phase-Shifting Transformers

ZA-SANS

SANS 1156-2:2010 Hose for liquefied petroleum gas (LPG) Part 2: Hose and tubing for use in LPG vapour phase and LPG-air installations

Building Officials and Code Administrators International(U.S.)

BOCA CHAPTER 7 NMC COMM-1993 Hydronic Piping
BOCA IMC-2000 CHAPTER 12-2000 Hydronic Piping
BOCA CHAPTER 7 NMC-1993 Hydronic Piping
BOCA IOTFDC-1998 CHAPTER 25-1998 Hydronic Piping
BOCA ARTICLE 7 NMC-1990 Hydronic Piping Seventh Edition

Malaysia Standards

MS 773-1999 Specification for flexible rubber pipes and hoses for use in liquefied petroleum gas vapor phase and liquefied petroleum gas/air installations

SCC

AWWA ACE68958 Understanding the Benefits of Geospatial Data for Demand Side Planning and Management
AWWA ACE68678 What the Industry Needs to Know about Asset Management: The AM Research Roadmap AwwaRF Project 4002
AENOR UNE-EN 16125:2016 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapor pressure phase
NS-EN 16125:2019 LPG Equipment and Accessories — Pipework systems and supports — LPG in liquid phase and vapour pressure phase
NS-EN 16125:2015 LPG Equipment and Accessories — Pipework systems and supports — LPG in liquid phase and vapour pressure phase
DANSK DS/EN 16125:2019 LPG Equipment and Accessories – Pipework systems and supports – LPG in liquid phase and vapour pressure phase
DANSK DS/ISO 16362:2007 Ambient air - Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography

International Federation of Trucks and Engines

NAVISTAR CEMS A-45 PART II-2015 VOID - Hydraulic Line Tubing and Tubing Assemblies

TH-TISI

TIS 1055-1991 Standard for rubber hoses for liquefied petroleum gas in liquid phase
TIS 895-1989 Standard for liquefied petroleum gas rubber hose: vapour phase

U.S. Military Regulations and Norms

ARMY UFGS-33 52 43.13-2010 AVIATION FUEL PIPING

European Committee for Standardization (CEN)

EN 12493:2008 LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers design and manufacture Incorporates Amendment A1: 2012
EN 1762:2003/AC:2007 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification

German Institute for Standardization

DIN EN 16125:2019-12 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase; German version EN 16125:2019
DIN EN 1762:2019 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
DIN EN 16125:2019 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

IN-BIS

IS 10916-1984 Specification for vacuum tubes for collecting blood specimens (vacuum blood collection tubes)

ES-UNE

UNE-EN 16125:2020 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

CEN - European Committee for Standardization

EN 1762:1997 Rubber Hoses and Hose Assemblies for Liquefied Petroleum Gas@ LPG (Liguid or Gaseous Phase)@ and Natural Gas up to 25 Bar (2@5 MPa) - Specification
EN 1762:2018 Rubber hoses and hose assemblies for liquefied petroleum gas@ LPG (liquid or gaseous phase)@ and natural gas up to 25 bar (2@5 MPa) - Specification
PREN 16125-2018 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 3717-1991 Aerospace Series Tubes Selection for Engines Fluid Systems (Issue P 1)

Japanese Industrial Standards Committee (JISC)

JIS W 0601:1990 Aerospace -- Pipelines -- Identification

Lithuanian Standards Office

LST EN 1762-2005 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
LST EN 1762-2005/AC-2008 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification

Danish Standards Foundation

DS/EN 1762/AC:2008 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
DS/EN 1762:2004 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
DS/ISO 16362:2007 Ambient air - Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography

AENOR

UNE-EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification

ES-AENOR

UNE 111-225-1990 Vacuum tube for drawing blood samples

Others: