Roughness n7 means

Roughness n7 means, Total:174 items.

The international standard classification for "Roughness n7 means" includes: Paper and board , Rubber and plastics products , Properties of surfaces , Iron and steel castings , Cable or rope drives and their components , Conducting materials , Manufacturing forming processes , Belt drives and their components .

The Chinese standard classification for "Roughness n7 means" includes: Paper pulp and paperboard , Basic standards and general methods for synthetic resin and plastic , Basic standards and general methods , Casting , Chain drive, belt drive and key joint , Carbon material , Nonmetal material testing machine , Length Measurement .

---

Taiwan Provincial Standard of the People's Republic of China

• CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method
• CNS 10793-1984 Roughness Comparison Specimens
• CNS 7868-1981 Surface Roughness

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 15056-1994 Evaluation method on cast surface roughness
• GB/T 6060.1-1997 Roughness comparison specimens - Cast surfaces
• GB/T 11357-1989 Quality,Surface roughness and balance of transmission pulleys
• GB/T 13841-1992 roughness for electronic ceramic parts
• GB/T 14234-1993 roughness for plastic parts
• GB/T 14495-1993 Roughness comparison specimens for wooden pieces
• GB/T 7220-1987 Surface roughness--Terminology--Measurement of surface roughness parameters
• GB/T 1031-1995 Surface rouglness--Parameters and their values
• GB/T 11357-2008 Quality roughness and balance of transmission pulleys
• GB/T 11357-2020 Quality, roughness and balance of transmission pulleys
• GB/T 42671-2023 Test method for surface roughness of carbon materials
• GB/T 2679.4-1994 Paper and board—Determination of the roughness (Bendtsen method)
• GB/T 15056-2017 Casting surface roughness-Appraising method

Professional Standard - Aviation

• HB 6172-1988 General Surface Roughness

Professional Standard - Military and Civilian Products

• WJ/Z 314-1991 Fuze parts surface roughness

Professional Standard - Light Industry

• QB 1056-1991 Bentson roughness tester
• QB/T 1056-1991 Bendtsen Roughometer

Group Standards of the People's Republic of China

• T/SBX 064-2022 Virtual roughness meter system for skin pass unit

未注明发布机构

• FORD FLTM BA 003-1-2001 DETERMINATION OF THE SURFACE ROUGHNESS OF COLD ROLLED SHEET STEEL

National Metrological Technical Specifications of the People's Republic of China

• JJF 1099-2003 Calibration Specification of Roughness Comparison Specimens
• JJF 1210-1990 O.T.N of Sourface Roughness Standard
• JJF 1099-2018 Calibration Specification for Roughness Comparison Specimens

National Metrological Verification Regulations of the People's Republic of China

• JJG 2018-1989 Measuring Instruments for Surface Roughness

National Standardisation Body (ASRO)

• STAS R 6859-1968 Surface roughness. Roughness selection criteria
• STAS 9331-1973 FINISHED PRODUCTS FROM PAPER INDUSTRY Determination of loughness by Bendtsen appawatus
• STAS 7087-1982 ROUGIINESS COMPAR ISONSPEGIMENS
• STAS 5730/1-1985 Surlace conditions SURFACE ROUGHNESS Terminology
• STAS 12192-1984 G?ARS Choice or precisions and roughness gear
• STAS 11124-1978 GROUND TALC General technical requirements for crudity
• STAS 2700/13-1989 Threaded fasteners RADII UNDER HEAD AND ROUGHNESSES

Netherlands Institute for Standardization

• NEN 3636-1980 Surface roughness - Roughness comparison specimens
• NEN 3635-1980 Surface roughness - Measurement of fla roughness value
• LUN 8008-1970 op documenten van de Koninklijke Luchtmacht.
• NEN 3632-1986 Surface roughness - Evaluation of Ra value
• NPR 3637-1994 Surface roughness. Guideline for the relation between the function of a workpiece surface and the roughness value
• NEN 2012-1989 Paper and board - Determination of roughness - Bendtsen method
• NEN 1839-1989 Paper - Determination of paper surface roughness with water

Standards Norway

• NS 982:1969 Surface roughness, reference lengths and roughness values
• NS-ISO 4287-2:1984 Surface roughness - Terminology - Part 2: Measurement of surface roughness parameters

Korean Agency for Technology and Standards (KATS)

• KS B 0504-1975 Instruments for the measurement of surface roughness (by the nf roughness method)
• KS B 0502-1976 Instruments for the measurement of surface roughness (by indicating method of Surface roughness)
• KS B 0162-1999 Surface roughness-Terminology-Part 1:Surface and its parameters
• KS B 0162-1999(2009) Surface roughness － Terminology － Part 1: Surface and its parameters
• KS B 0507-2016 Roughness Comparison Specimens
• KS B 0507-1975 Roughness Comparison Specimens
• KS B 0507-1986 Roughness Comparison Specimens
• KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
• KS B 0161-1999(2009) Surface roughness－Definitions and designation
• KS B 0161-1999 Surface roughness-Definitions and designation
• KS M 3817-1982 Methods for comparison of surface roughness of plastics
• KS M 3817-2004 Methods for comparison of surface roughness of plastics
• KS B 0506-2016 Instruments for the Measurement of Surface Roughness by the Interferometric Method
• KS B 0505-1975 Instruments for the measurement of surface roughness (by the capacitance method)
• KS M 3817-2002 Methods for comparison of surface roughness of plastics
• KS B 0503-1976 Instruments for the measurement of surface roughness (by light cutting method)
• KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
• KS B 0162-2013 Surface roughness － Terminology － Part 1: Surface and its parameters
• KS B 0507-1975(2011) Roughness Comparison Specimens
• KS B 0506-2021 Instruments for the Measurement of Surface Roughness by the Interferometric Method

Swedish Institute for Standards

• SIS SS 674-1989 Surface roughness — Guidance for the choice of surface roughness
• SIS SS-ISO 4287/2:1988 Surface roughness - Terminology - Part 2: Measurement of surface rough- ness parameters
• SIS SS 675-1989 Surface roughness — Measurement of surface roughness by means of electrical profile recording instruments
• SIS 81 20 04-1973 Concrete surfaces. Roughness
• SIS 81 20 05-1973 Concrete surfaces. Determination of surface roughness
• SIS SS 81 73 46-1989 Doors — Sizes, flatness, squareness and roughness — Requirements
• SIS SMS 672-1964 Drawing Rules, Declaration of Surface Roughness
• SS 817346:1989 Doors - Sizes, flatness, squareness and roughness- Requirements

German Institute for Standardization

• DIN 3969-1:1991-10 Surface roughness of tooth flanks; roughness parameters, surface grades
• DIN 3969-1:1991 Surface roughness of tooth flanks; roughness parameters, surface grades
• DIN 38455:2024 Calculation of the auditory sensation roughness
• DIN 38455:2022-11 Calculation of the auditory sensation roughness / Note: Date of issue 2022-10-21
• DIN 4766-1:1978 Surface roughness manufacturing method
• DIN 38455 E:2022 Draft Document - Calculation of the auditory sensation roughness
• DIN 4762:1989 Surface roughness terms, surfaces and their parameters

Ente Nazionale Italiano di Unificazione

• UNI ISO 4287-2:1991 Surface roughness. Terminology. Measurement of surface roughness parameters.
• UNI ISO 2632-3:1992 Roughness comparison specimens. Cast surfaces.
• UNI ISO 248:2007 Rubber, raw - Determination of volatile- matter content
• UNI 3963-P2-1978 Surface geometric errors. Surface roughness'1
• UNI ISO 4287-1:1991 Surface Roughness. Terminology. Surface and its parameters

Magyar Szabványügyi Testület

• MSZ 9654-1966 Surface roughness
• MSZ KGST 849-1978 Roughness sample cut surface
• MSZ 9654/1-1986 Cut surface roughness sample
• MSZ 15-1968 Technical drawing. Mechanical drawing roughness
• MSZ KGST 1632-1979 Surface roughness marking on technical drawings
• MSZ KGST 638-1977 Surface roughness parameters and main values
• MSZ 4722-1984 Surface roughness parameters and main parameter values
• MSZ 07 3301-1977 Hand Measurement Tool for Road Roughness

British Standards Institution (BSI)

• BS 6741-2:1987 Glossary of surface roughness terms-Measurement of surface roughness parameters
• BS 2634-3:1980 Specification for roughness comparison specimens-Cast surfaces

Türk Standardları Enstitüsü

• TS 971-1971 SURFACE ROUGHNESS
• TS 929-1976 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD-VOCABULARY

Cuban Institute of Standards and Metrology

• NC 03-04-1967 Surface roughness
• NC 02-10-1967 Indication of surface roughness on drawings

Society of Automotive Engineers (SAE)

• SAE AS291E-1991 Surface Texture@ Roughness@ Waviness and Lay (Reaffirmed Noncurrent May 2006)
• SAE AS291A-1955 SURFACE ROUGHNESS (AA)
• SAE AS291B-1960 SURFACE ROUGHNESS (AA)
• SAE AS291C-1963 SURFACE ROUGHNESS (AA)
• SAE AS291F Surface Texture, Roughness, Waviness and Lay
• SAE AS291D Surface Texture, Roughness, Waviness and Lay
• SAE AS291E Surface Texture, Roughness, Waviness and Lay
• SAE AS291B Surface Texture, Roughness, Waviness and Lay
• SAE AS291A Surface Texture, Roughness, Waviness and Lay
• SAE AS291 Surface Texture, Roughness, Waviness and Lay
• SAE AS291C Surface Texture, Roughness, Waviness and Lay
• SAE AS291D-1964 Surface Texture@ Roughness@ Waviness and Lay
• SAE AS291E-2001 Surface Texture, Roughness, Waviness and Lay
• SAE AS291E-2006 Surface Texture, Roughness, Waviness and Lay
• SAE AS291D-1995 SURFACE TEXTURE, ROUGHNESS, WAVINESS AND LAY
• SAE AS291F-2014 Surface Texture, Roughness, Waviness and Lay

Swiss Association for Standardization (SNV)

• VSM 15338.1-1955 Surface roughness. Evaluation of workpiece surfaces based on roughness

Aerospace Industries Association

• AIA NAS30 Surface Roughness Designation
• AIA NAS31 Conversion Table, Surface Roughness Designations

Yugoslav Association for Standardization

• JUS M.A1.025-1981 Surface roghness of industrial products. Correlation bettveen surface roughness grade numbers and to- grade lerance grades
• JUS M.A1.026-1981 Sur face roghness ofindustrial products. Correlation between the surface roughness and surface finishing process

Czech Standards Institute (UNMZ)

• CSN 01 4456-1983 Surface rouglmess of castings
• CSN 73 2520-1993 Surface roughness of stmctures
• CSN ON 01 4452-1962 Surface roughness of water pipe parts
• CSN 01 4451-1980 Surface roughness. Basic pnrameters, numerical values
• CSN 01 4451 Zb-1990 Surface roughness. Basic characteristic values
• CSN 01 4450-1980 Surface roughness. Basic pnrameters, numerical values
• CSN ON 28 2109-1964 Surface roughness of electric two-wheel parts
• CSN 50 0424-1980 Roughness of páper (Parker print-surf tester)
• CSN 01 3144-1980 Technical drawings. Indieation of surface roughness
• CSN 49 0169-1986 Method for determination surface roughness of particle boards
• CSN ON 13 0060-1962 Surface roughness of parts, fittings and pipes
• CSN 25 2302-1980 Surface roughness comparison specimens. echnical requirements

Danish Standards Foundation

• DS/ISO 4287/2:1986 Surface roughness — Terminology Part 2: Parametres and characteristics of surface roughness

Gosstandart of Russia

• GOST 7016-2013 Products of wood and wood materials. Roughness parameters
• GOST R 70117-2022 Surface roughness. Selection recommendations
• GOST 19948-1974 Wax-pattern dies. Surface roughness
• GOST 25142-1982 Surface roughness. Terms and definitions
• GOST 2789-1973 Surface roughness. Parameters and characteristics
• GOST 16241-1970 Chill moulds. Roughness of surface
• GOST 27964-1988 Measurement of surface roughness parameters. Terms and definitions
• GOST 21293-1975 Surface finish heated core boxes. Parameters

Bureau of Indian Standards

• IS 3073-1967 Assessment of surface roughness
• IS 9894-1981 Test method for paper smoothness/roughness
• IS 10707-1983 Instrument for measuring surface roughness using profilometry

Japanese Industrial Standards Committee (JISC)

• JIS B 0659:1996 Roughness comparison specimens
• JIS K 7104:1976 Methods for comparison of surface roughness of plastics
• JIS B 0601:1994 Surface roughness -- Definitions and designation

American Association of State Highway and Transportation Officials

• AASHTO PP 37-2004 Standard Practice for Determination of International Roughness Index (IRI) to Quantify Roughness of Pavements
• PP 37-2004 Standard Practice for Determinination of International Roughness Index (IRI) to Quantify Roughness of Pavements

International Organization for Standardization (ISO)

• ISO 4287-2:1984 Surface roughness; Terminology; Part 2 : Measurement of surface roughness parameters Trilingual edition

Austrian Standards

• ONORM M 1117-1989 Surface roughness and workpiece function
• ONORM M 1116-1988 Surface roughness and ISO-tolerance quality Rugosite des surfaces et qualite de tolerance ISO
• ONORM M 1118-1986 Technical surjaces; roughness comparison specimens
• ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
• ONORM M 1115-1986 Technical surfaces; terms, definitions, roughness parameters

Associação Brasileira de Normas Técnicas

• ABNT NB-93-1964 Surface roughness. Brazilian Norms

Standard Association of Australia （SAA）

• AS 2382:1981 Surface roughness comparison specimens

American Society for Testing and Materials (ASTM)

• ASTM D7466-08 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
• ASTM D7466-10 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

Indonesia Standards

• SNI 05-1886-1990 Definisi dan penandaan kekasaran permukaan
• SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.

GM North America

• GM GMY220-1988 Surface Texture - Roughness, Waviness and Lay

Canadian Standards Association (CSA)

• CSA B95-1962(R2002) Surface Texture (Roughness, Waviness and Lay)

Aerospace Industries Association/ANSI Aerospace Standards

• NAS30-1956 Surface Roughness Designation (Rev 4)

American Water Works Association (AWWA)

• AWWA JAW24296 Journal AWWA — Predicting Internal Roughness in Water Mains

Spanish Association for Standardization (UNE)

• UNE 56743:1988 HARDBOARDS. DETERMINATION OF SURFACE FINISH (ROUGHNESS)

Instituto Colombiano de Normas Técnicas y Certificación

• ICONTEC 1510/1-1979 Rough thread of high hardness polyester fiber

National Association of Corrosion Engineers (NACE)

• NACE SP0616-2022 Standard for Hull Roughness Measurements on Ship Hulls in Dry Dock

American Gear Manufacturers Association

• 12FTM20-2012 The Effect of the Surface Roughness Profile on Micropitting

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

• TCVN 3226-2001 Paper and board.Determination of roughness.Bendtsen method

American National Standards Institute （ANSI)

• ANSI/ASME B46.1-2009 Surface Texture, Surface Roughness, Waviness and Lay

Association of German Mechanical Engineers

• VDI/VDE 2602 Blatt 2-2008 Roughness measurement - Roughness measurement using contact (stylus) instruments - Profile method - Setup, measurement conditions, procedure

American Society of Mechanical Engineers (ASME)

• ASME B46.1-1985 Surface texture (surface roughness, waviness, and lay)
• ASME B46.1-1995 Surface Texture, Surface Roughness Waviness and Lay (B46.1 - 1995)
• ASME B46.1-1962 Surface Texture (Surface Roughness, Waviness, and Lay)
• ASME B46.1-1978 Surface Texture (Surface Roughness, Waviness, and Lay)

Polski Komitet Normalizacyjny (PKN)

• PN M01146-1989 Engineering drawings. Indication of roughness and waviness of surface

Others: Roughness n7,Surface roughness n7,n7 surface roughness,n7 roughness,Surface roughness n7 level