Flexural modulus testing

Flexural modulus testing, Total:116 items.

The international standard classification for "Flexural modulus testing" includes: Cellular materials , Veterinary medicine , Moulding equipment .

The Chinese standard classification for "Flexural modulus testing" includes: Synthetic resin and plastic , Animal quarantine, veterinary and epidemic prevention , Combination grippers , Moulds , Technical management , Non-metal chemical machinery equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8812.2-2007 Rigid cellular plastics—Determination of flexural properties—Part 2:Determination of flexural strength and apparent flexural modulus of elasticity
GB/T 41627-2022 Detection method of Campylobacter jejuni from animal samples

Professional Standard - Aviation

HB 4369-1989 Curved Die Block
HB 4343-1989 Curved Female Frame

Professional Standard - Aerospace

QJ 2533.4-1993 Small Combination Bending Die Components Bending Die
QJ 2533.9-1993 Small Combined Bending Die Component A Type Bending Punch
QJ 2533.11-1993 Small Combined Bending Die Component C Type Bending Punch
QJ 773.37-1983 Small-sized Combination Die - R Bent Female Die
QJ 2533.10-1993 Small Combined Bending Die Components Type B Bending Punch
QJ 2315.2-1992 Universal trough bending die (L≤1200mm) punch
QJ 2312.2-1992 Male Mold of Universal Trough Curve Mold (L≤220mm)
QJ 2532.6-1993 Small combined bending die element length 340mm bending upper die base
QJ 773.30-1983 Small-sized Combination Die � Bent-shaped Bent Male Die
QJ 2532.4-1993 Small combined bending die element length 1020mm bending upper die base
QJ 2314.4-1992 Universal trough bending die (L≤1200mm) die
QJ 2532.5-1993 680mm long bending upper die base for small combined bending die elements
QJ 2313.2-1992 Universal trough bending die (L≤600mm) punch
QJ 773.32-1983 Small-sized Combination Die - Bent Female Die

Group Standards of the People's Republic of China

T/CPMA 006-2019 Identification of Campylobacter jejuni and Campylobacter coli
T/SSEA 0069-2020 Measuring method of bending degree of bar

National Metrological Verification Regulations of the People's Republic of China

JJG(建材) 135-1999 Flat glass curvature detection device

Professional Standard - Electron

SJ 3009.6-1988 Combined dies - Bending point

Professional Standard - Chemical Industry

HG/T 4283-2011 Test method of bending for plastics welded test specimen

YU-JUS

JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing
JUS D.Z8.046-1990 Cork. Pure expanded corkboard. Determination of the modulus of rupture by bending

RO-ASRO

STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

GSO

GSO ISO 16978:2009 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength
OS GSO ISO 16978:2009 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength
BH GSO EN 310:2022 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
GSO EN 310:2021 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
GSO ISO 1209-2:2015 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
OS GSO ISO 1209-2:2015 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity

SCC

DANSK DS/EN 310:1993 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
NS-EN 310:1993 Wood-based panels — Determination of modulus of elasticity in bending and of bending strength
AENOR UNE-EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
NS 3277:1987 Particle boards — Test methods — Modulus of elasticity in bending and bending strength
NS 3252:1975 Test methods for rigid flat sheets — Modulus of elasticity in bending and bending strength
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method

British Standards Institution (BSI)

BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength

Lithuanian Standards Office

LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength

Indonesia Standards

SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength

German Institute for Standardization

DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
DIN ISO 11093-8 E:2018-05 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

Danish Standards Foundation

DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

European Committee for Standardization (CEN)

EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength

Association Francaise de Normalisation

NF EN 310:1993 Wood-based panels - Determination of flexural modulus of elasticity and flexural strength
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
NF EN 14771:2012 Bitumens and bituminous binders - Determination of the bending stiffness modulus - Bar bending rheometer (BBR)
NF B57-041:1974 Expanded pure agglomerated cork. Determination of the modulus of rupture by bending.

Spanish Association for Standardization (UNE)

UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
UNE 43713:1980 FLEXURE TESTING OF FLAT GLASS. DETERMINATION OF MODULUS OF RUPTURE
UNE 56 711 Determination of elastic modulus and bending resistance of particle board
UNE 56-739-1988 Determination of elastic modulus and bending resistance of hardboard

CZ-CSN

CSN 49 0116-1976 Sawn timbor Testing ní' iikkIuIus of elasticity in bending
CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending

HU-MSZT

MSZ 11686-1968 Manual material inspection. Obvious bends, bend detection and instrumentation
MSZ 15444-1970 Testing methods for powder box products. Curvature measurement
MSZ 8880/23-1976 Power equipment testing tools and testing methods. Bend inspection
MSZ 4309/8-1984 MSZ 4309/8-84 steel welding inspection. Single-sided bending test

BE-NBN

NBN-EN 310-1994 Wooden fiberboard. Determination of bending elastic modulus and bending resistance

AT-ON

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength

International Organization for Standardization (ISO)

ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 11093-7:1997 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method
ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 2077:1979 Pure expanded corkboard; determination of the modulus of rupture by bending
ISO 2077:1979/Amd 1:1980 Pure expanded corkboard; determination of the modulus of rupture by bending
ISO 11093-8:2012 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 11093-8:1997 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 11093-8:2017 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 6721:1983 Plastics; Determination of damping properties and complex modulus by bending vibration

Korean Agency for Technology and Standards (KATS)

KS M ISO 1209-2-2022 Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 2077-2008 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 2077:2008 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 2077:2004 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
KS F 2208-2004 Method of bending test for wood

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4266.5:2004/AMD 1:2006 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength
AS/NZS 4266.5:2004(R2006) Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength
AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)

GM North America

GM GMP.PA66.085-2002 Flexible Nylon 66 600 Flexural Modulus
GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus Revision B
GM GMP.E/P.074-1996 Polyolefin Alloy - 800 MPa Flexural Modulus
GM GMP.E/P.049-1992 Polyolefin Alloy - 375 MPa Flexural Modulus
GM GMP.E/P.039-2003 Polyolefin Alloy 700 MPa Flexural Modulus
GM GMP.EEBC+ PBT.002-1993 Copolyester Elastomer - 700 MPa Flexural Modulus
GMP.E/P.039-2003 Polyolefin Alloy - 700 MPa Flexural Modulus Revision B
GM GMP.E/P.064R-1994 Polyolefin Alloy - Recycled, 550 MPa Flexural Modulus
GMP.PUR.041-1999 Polyurethane RRIM - High Heat, 20% MICA, 1320 MPa Flexural Modulus
GMP.PUR.018-1995 Polyurethane RRIM - 20% Glass Fiber, 700 MPa Flexural Modulus Revision A
GM GMP.E/P.069-1994 Polyolefin Alloy - Weather Resistant, 925 MPa Flexural Modulus
GM GMP.PU.019-1991 Polyurea RRIM - 15% Flake Glass, 875 MPa Flexural Modulus

KR-KS

KS M ISO 2077-2004 Pure expanded corkboard－Determination of the modulus of rupture by bending

South African Bureau of Standard

SANS 6112:1988 Bending modulus of steel shanks for footwear

Japanese Industrial Standards Committee (JISC)

JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity

CH-SNV

VSM 18660.7-1964 Paint and dye industry. Paint testing. Paint bending stress calculation method (mandrel bending detection)
SN 053 901/1-1989 Rubber condoms — Part 1: Quality testing of whole condoms

PT-IPQ

NP EN 310-2002 Wood-based panels Determination of modulus of elasticity in bending and of bending strength

VDI - Verein Deutscher Ingenieure

VDI 3431-2014 Biegen von Profilen - Pruefhinweise fuer Biegebauteile aus Profilen

American Society for Testing and Materials (ASTM)

ASTM C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite

BR-ABNT

ABNT MB-1092-1979 Railway wheel set. Warp detection at corners

Society of Automotive Engineers (SAE)

SAE ARP1321-1993 FLEXURE TESTING OF BENT HYDRAULIC TUBING