Digital average test parameters

Digital average test parameters, Total:225 items.

The international standard classification for "Digital average test parameters" includes: Medical Sciences and health care facilities in general , Television receivers , Glass in general , Reinforced plastics , Optoelectronics. Laser equipment , Electronic components in general , Equipment for the chemical industry , Other standards related to optics and optical measurements , Industrial trucks , Boring and milling machines , Raw materials , Reaction vessels and their components .

The Chinese standard classification for "Digital average test parameters" includes: Electrical system and equipment , Marking, packaing, transport and storage , Technical Management , Infrared device , Broadcasting and television transmission and receiving equipment , Laboratory glass, ceramic and plastic vessel , Ceramic and glass in general , Fibre reinforced composites , Non-metal chemical machinery equipment , Optoelectronic device assembly , Special electronic technology material , Storage equipment and handling machinery , Drilling, boring and milling machine , Heat-exchange equipment , Radio Measurement , Other food processing machinery , Daily use glass, ceramic, enamel and plastic products in general , Chemical machinery and equipment parts .

Professional Standard - Aviation

HB 6448-1990 Digital test of performance parameters of aircraft power supply system

Military Standard of the People's Republic of China-General Armament Department

GJB 332-1987 Test method for average linear expansion coefficient of rigid solids
GJB 9388-2018 Test methods for integrated circuit analog-to-digital and digital-to-analog converters
GJB 7361-2011 The measuring methods for parameters of military ultraviolet detectors
GJB 894-1990 Military laser radiation parameter testing
GJB 10169-2021 Sync/Digital, Solving/Digital, Digital/Sync, Digital/Solving Converter Test Methods
GJB 2078-1994 2048kbit/s series bit rate digital interface parameter test method
GJB 7056-2010 Ballistic parameter test procedure for small arms
GJB 2087-1994 Test method for technical parameters of digital instantaneous frequency measuring receiver
GJB 1802-1993 Test method for average linear expansion coefficient of low expansion rigid solid materials
GJB 8127-2013 Measuring methods for parameters of ultraviolet focal plane arrays

Professional Standard - Pharmaceutical Packaging

YBB 0020-2003 Pingjunxianrepengzhangxishu Cedingfa Tests for coefficient of mean linear thermal expansion
YBB 0020(03)-2003 Determination method of average linear thermal expansion coefficient (Trial)

Professional Standard - Aerospace

QJ 970-1986 Rigid solid average linear expansion coefficient test method
QJ 1867-1990 Adhesive average linear expansion coefficient test method

Professional Standard - Electron

SJ/T 10196-1991 Measuring methods of MSI and SSI digital IC static parameter testers
SJ/T 11348-2006 Methods of measurement for digital television flat panel displays
SJ 20831-2002 Method for measurement and test of parameters of 4N infrared focal plane detector dewar assembly
SJ/T 11521.3-2015 Interactive platform for digital television receiving equipment. Part 3: System testing specification
SJ/T 11036-1996 Test method for average linear thermal expansion coefficent of electronic glass
SJ 20762-1999 Measurement methods for parameters of gas lasers

National Metrological Technical Specifications of the People's Republic of China

JJF 1491-2014 Calibration Specification for Digital AC Electrical Parameters Meter

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17444-1998 The technical norms for measurement and test of characteristic parameters of infrared focal plane arrays
GB/T 25144-2010 Determination of coefficient of mean linear thermal expansion for vitreous and porcelain enamels
GB/T 2572-1981 Glass fiber reinforced plastics-Average linear expansion factor of fiber-Method of testing
GB/T 2572-2005 Fiber - reiforced plastics composites - Determination for mean coefficient of linear expansion
GB/T 22264.8-2009(英文版) Fixed digital electric measuring instruments—Part 8: Recommended test methods
GB/T 16920-1997 Glass--Determination of coefficient of mean linear thermal expansion
GB/T 13584-1992 Measuring methods for parameters of infrared detectors
GB/T 16920-2015 Glass―Determination of coefficient of mean linear thermal expansion
GB/T 5594.3-1985 Test methods for properties of structure ceramic used in electronic components--Test method for mean coefficient of linear expansion
GB/T 5594.3-2015 Test methods for properties of structure ceramicused in electronic components and device―Part 3:Test method for mean coefficient of linear expansion
GB/T 13584-2011 Measuring methods for paramaters of infrared detectors
GB/T 17444-2013 Measuring methods for parameters of infrared focal plane arrays
GB/T 43256-2023 Test method for parameters of distributed optical fibre strain measuring system

Professional Standard - Machinery

JB/T 7156-1993 Caliper disc brakes Types and basic parameters
JB/T 2390-1984 Basic parameters of counterbalanced forklift
JB/T 5669-1991 Digital force gauge
JB/T 12397.1-2015 NC flat surface grinding machine of wide coated abrasive belt--Part 1: Types and parameters
JB/T 2390-2005 Counter balanced fork lift trucks - Basic parameter
JB/T 12631-2016 Test chart for digital stencil duplicators
JB/T 3313.1-2011 Surface milling machines — Part 1：Types and parameters
JB/T 4740-1997 Type and Basic Parameters of Air cooled Heat Exchanger
JB/T 7006-1993 Parallel shaft coupling type, basic parameters and dimensions

National Metrological Verification Regulations of the People's Republic of China

JJG 1175-2021 Standard Hydrophones in 200 Hz to 5 kHz(Complex Moving Weighted Averaging Method)
JJG 516-1987 Model BJ2920 (HQ2) Digital DC Characterization Tester for Bipolor Transiste

Group Standards of the People's Republic of China

T/QGCML 1764-2023 One-stop digital marketing platform technical specifications
T/AIITRE 11001-2023 Digital twin software platform — Reference architecture

国家广播电影电视总局

GY/T 282-2014 Technical requirements for average loudness and true peak audio level of digital television programs

Professional Standard - Business

SB/T 10186-1993 Type and Parameter for Tea Plane Circular Sieve Machine

Professional Standard - Supply and Marketing Cooperative

GH/T 1181-2017 Type and parameters of flat circular sieve machine for tea

Professional Standard - Building Materials

JC/T 679-1997 Glass - The method for measuring coefficient of mean linear thermal expansion

Professional Standard - Post and Telecommunication

YD/T 627-1993 Parameters transmission characteristics and test methods of the digital relay interface(2048kbit/s)for digital switch
YD/T 627-2012 Parameters of digital exchange digital relay interfaces (2048kbit/s) and transmission characteristics between digital relay interfaces as well as their test methods

能源

NB/T 51036-2015 Portable multi parameter testing instrument for coal mine water

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 7991.7-2019 Test method of viterous and porcelain enamels--Part 7: Determination of coefficient of mean lincar thermal expansion

Professional Standard - Electricity

DL/T 2502-2022 Field test procedures for uniformity of smoke and wind parameters in coal-fired power stations

Taiwan Provincial Standard of the People's Republic of China

CNS 13329-1993 Encoding parameters of Digital Television for Studio

Professional Standard - Light Industry

QB/T 1321-2012 Test method for mean liner thermal expansion coefficient of ceramic material
QB/T 1321-1991 Test Method for Mean Liner Thermal Expansion Coefficient of Ceramic Material

国家发展和改革委员会

HG/T 3796.1-2006 Mixer type and basic parameters

Professional Standard - Chemical Industry

HG/T 2123-1991 Stirrer type and main parameters
HG/T 3796.1-2005 Impeller types and parameters

未注明发布机构

DIN EN 10049 E:2013-03 Measurement of roughness average Ra and peak count RPc on metallic flat products
IEEE Std 1445-2016 IEEE Standard for Digital Test Interchange Format (DTIF)

Professional Standard - Labor and Labor Safety

LD/T 95-1996 Electrical form and parameters of planar slotted metal blasting

Korean Agency for Technology and Standards (KATS)

KS L 2506-2009 Testing method for average linear thermal expansion of glass
KS L ISO 7991-2022 Glass－Determination of coefficient of mean linear thermal expansion
KS L ISO 7991-2012(2017) Glass－Determination of coefficient of mean linear thermal expansion
KS L ISO 7991:2012 Glass－Determination of coefficient of mean linear thermal expansion
KS L ISO 7991-2012(2022) Glass－Determination of coefficient of mean linear thermal expansion
KS B 4422-2007 Test code for performance and accuracy of computerized numerically controlled ram type drilling machines for plate
KS C IEC 61290-3:2007 Optical fibre amplifiers－Basic specification－Part 3：Test methods for noise figure parameters
KS A ISO 26431-1-2012(2017) Digital cinema(D-cinema) quality－Part 1：Screen luminance level, chromaticity and uniformity

Japanese Industrial Standards Committee (JISC)

JIS R 3102:1995 Testing method for average linear thermal expansion of glass

RU-GOST R

GOST 25811-1983 Means measuring laser output average power. Types. Basic parameters. Measuring methods
GOST 27667-1988 Compact disc digital audio system. Parameters
GOST 30606-1998 Digital converters for voltage or current measuring. Basic parameters. General technical requirements. Methods of tests
GOST R 50355-1992 Digital instruments to measure immittance parameters. General technical requirements and methods of tests
GOST R 57395-2017 Angle-to-digit converters. General requirements for measuring instruments, testing and monitoring of input and output parameters
GOST 15173-1970 Plastics. Method for determination of mean coefficient of linear thermal expansion
GOST 27285-1987 Integrated digital communication network. Switching and digital transmission systems interface specification
GOST 28871-1990 Line transmission path equipment of digital optical-fibre transmission systems. Methods of measuring basic parameters
GOST R 52591-2006 Digital television format user's data broadcasting system. Basic parameters
GOST R 56476-2015 Digital video broadcasting. System TV-Anytime. Metadata schemas. Basic parameters
GOST R 55712-2013 Digital broadcast television. Multimedia home platform. Classes 1.1. Basic parameters
GOST R 56170-2014 Digital video broadcasting. Multimedia home platform. Classes 1.2. Basic parameters
GOST R 54456-2011(2020) Digital broadcast television. Multimedia home platform. Classes 1.0. Basic parameters
GOST R 54456-2011 Digital broadcast television. Multimedia home platform. Classes 1.0. Basic parameters
GOST 25041-1981 Flatbed knitting machines. Types, main technical data and dimensions
GOST 21611-1982 Numerically controlled vertical drilling machines. Basic parameters and coupling dimensions
GOST 8026-1992 Levelling rules. Specifications
GOST ISO 16754-2013 Earth-moving machinery. Determination of average ground contact pressure for crawler machines
GOST 21171-1980 Neutron generators. Types and parameters
GOST 24225-1987 NC coordinate turret cutting centres. Parameters and dimensions
GOST R 54996-2012 Digital high-definition television. Digital interfaces for MPEG TS transport streams. Basic parameters
GOST 18683.0-1983 Digital integrated circuits. General requirements for measuring electrical parameters
GOST 10387-1981 Measuring machines for checking fine pitch spur gears. Types. Basic dimensions, standards of accuracy
GOST 27528-1987 Kaplan. Francis exial flow vertical shaft hydraulic tyrbines. Basic parameters
GOST 23403-1978 Printing teletypes for 7-elements code. Basic parameters
GOST 21137-1981 Apparatus telegraph start-stop, 5-element code. Methods of electric parameters measuring
GOST 29234.3-1991 Moulding sands. Methods for determination of medium size of seed and coefficient of homogeneity

PL-PKN

PN A55552-1986 Homogenization of milk. Basic parameters

YU-JUS

JUS B.E8.310-1989 Glass. Determinaticm of coefficient of tean linear ternal expansion
JUS U.A9.007-1981 Modular co-ordination. Reference lines of horizonta! modular dimensions

International Organization for Standardization (ISO)

ISO 7991:1987 Glass; Determination of coefficient of mean linear thermal expansion

CZ-CSN

CSN 64 0143-1961 Solid non-ferrous material tests. Mean coefficient of thermal linear expansion
CSN 72 5127-1987 Ceramic tiles. Determination of the mean coefficient of lenear thermal expansion
CSN 42 0440-1985 Determination of the mean linear thermal expansion coefficient of metals
CSN ISO 7991:1992 Glass. Determination of the coefficient of mean linear thermal expansion
CSN 34 6312-1985 Testing of ceramic electrotechnic materials. Determination of the mean coefficient of the specific linear thermal expansion
CSN 72 5030-1973 Testing of fired ceramic materials. Definition of the specific linear thermal expansion and mean coefficient
CSN ISO 2854:1994 Statistical interpretation of data - Techniques of estimation and tests relating to mens and variances
CSN 35 8790 Cast.1-1983 Digital integrated circuits. Measuring methods of electrical parameters

TIA - Telecommunications Industry Association

IS-4 ERTA-1982 Transmission Parameters for a Mu-Law Compatible PBX (Digital Loss-Level Plan)
IS-4-1982 Transmission Parameters for a Mu-Law Compatible PBX (Digital Loss-Level Plan)
TSB-1197-2014 Mode Conversion Parameters for Balanced Twisted Pair Cabling

British Standards Institution (BSI)

BS 7030:1988 Method for determination of the coefficient of mean linear thermal expansion of glass
BS IEC 61445:2012 Digital Test Interchange Format (DTIF)
BS IEC 61445:2013 Digital Test Interchange Format (DTIF)
BS EN IEC 63047:2021 Nuclear instrumentation. Data format for list mode digital data acquisition used in radiation detection and measurement
BS EN 10049:2005 Measurement of roughness average - Ra and peak count RPc on metallic flat products
BS EN 10049:2013 Measurement of roughness average $iR$ia and peak count $iR$iP$ic on metallic flat products
BS EN 61290-3-1:2004 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Optical spectrum analyzer method
BS EN 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1:Noise figure parameters - Optical spectrum analyzer method
BS ISO/IEC 24039:2022 Information technology. Smart city digital platform reference architecture. Data and service
BS ISO 19744:2020 Test conditions for numerically controlled broaching machines. Testing of accuracy. Vertical surface type broaching machines
BS CWA 15971-2:2009 Discovery of and access to eGovernment resources - Reference ontology and metadata schema
PD ISO/IEC TS 5928:2023 Information technology. Cloud computing and distributed platforms. Taxonomy for digital platforms

German Institute for Standardization

DIN ISO 7991:1998 Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991:1987)
DIN EN 10049:2014-03 Measurement of roughness average Ra and peak count RPc on metallic flat products; German version EN 10049:2013
DIN ISO 7991:1998-02 Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991:1987)
DIN 43751-4:1990-06 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details / Note: Applies in conjunction with DIN 43751-1 (1987-05).
DIN 43751-3:1987-05 Measurement and control; digital measuring instruments; instruments for measuring digital quantities; definitions, tests and data sheet details

AENOR

UNE 400308:1997 GLASS. DETERMINATION OF COEFFICIENT OF MEAN LINEAR THERMAL EXPANSION.

Danish Standards Foundation

DS/ISO 2854:1980 Statistical interpretation of data. Techniques of estimation and tests relating to means and variances
DS/ISO 3494:1980 Statistical interpretation of data. Power of tests relating to means and variances
DS/EN IEC 63047:2021 Nuclear instrumentation – Data format for list mode digital data acquisition used in radiation detection and measurement
DS/EN 10049:2006 Measurement of roughness average Ra and peak count RPc on metallic flat products

GSO

GSO ISO 14696:2014 Reaction-to-fire tests -- Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
OS GSO IEC 61445:2017 Digital Test Interchange Format (DTIF)
GSO IEC 61445:2017 Digital Test Interchange Format (DTIF)
OS GSO IEC 61290-3:2014 Optical amplifiers - Test methods - Part 3: Noise figure parameters

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE RP 155-2014 Reference Levels for Analog and Digital Audio Systems
SMPTE RP 155-2004 Pictures and Television Reference Level for Digital Audio Systems

Alliance of Telecommunications Industry Solutions （ATIS)

ATIS T1.TR.48-1996 Test Patterns for DS0 Synchronous Digital Data Circuits (SDD)
ATIS 0100503-2002 Network Performance Parameters for Dedicated Digital Services - Definitions and Measurements

International Telecommunication Union (ITU)

ITU-T O.150-1996 General Requirements for Instrumentation for Performance Measurements on Digital Transmission Equipment Study Group 4; 24 pp
ITU-R QUESTION 1356-2010 System parameters for digital sound systems
ITU-R QUESTION 135/6-2010 System parameters for digital sound systems
ITU-T O.191-2000 Equipment to Measure the Cell Transfer Performance of ATM Connections - Series O: Specifications of Measuring Equipment; Equipment for the Measurement of Digital and Analogue/Digital Parameters Study Group 4; 72 pp
ITU-T O.181-2002 Equipment to Assess Error Performance on STM-N Interfaces Series O: Specifications of Measuring Equipment Equipment for the Measurement of Digital and Analogue/Digital Parameters Study Group 4
ITU-T G.992.3 AMD 5-2012 Asymmetric digital subscriber line transceivers 2 (ADSL2) Amendment 5: Accuracy of test parameters (Study Group 15)
ITU-T G.992.3 AMD 4-2007 Asymmetric digital subscriber line transceivers 2 (ADSL2) Amendment 4: Accuracy of test parameters Study Group 15
ITU-T O.133-1993 EQUIPMENT FOR MEASURING THE PERFORMANCE OF PCM ENCODERS AND DECODERS Study Group IV
ITU-R SF.675-4-2012 Calculation of the maximum power density (averaged over 4 kHz or 1 MHz) of angle-modulated and digital carriers

ATIS - Alliance for Telecommunications Industry Solutions

T1.TR.48-1996 Test Patterns for DS0 Synchronous Digital Data Circuits (SDD)
0100503-2002 Network Performance Parameters for Dedicated Digital Services – Definitions and Measurements

International Electrotechnical Commission (IEC)

IEC 63047:2018 Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement
IEC 61445:2012*IEEE Std 1445 Digital Test Interchange Format (DTIF)
IEC 61445:2012 Digital test interchange format (DTIF)
IEC 63047:2018/COR1:2020 Corrigendum 1 - Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement

Association Francaise de Normalisation

NF B38-109:1985 Textile glass. Yarns. Determination of twist balance index.
NF EN 10049:2014 Measurement of the average roughness Ra and the number of peaks RPc on flat metal products
NF B30-103:1968 Glass. Determination of mean coefficient of linear expansion (direct method).
NF G06-037:1981 Essais des fibres - Cellulose - Détermination de l'indice de viscosité limite et du degré de polymérisation moyen viscosimétrique
NF C19-147*NF EN IEC 63047:2021 Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement
NF A45-000:2006 Measurement of roughness average Ra and peak count RPc on metallic flat products.
NF A45-000*NF EN 10049:2014 Measurement of roughness average Ra and peak count RPc on metallic flat products
NF L70-525:1972 Digital encoders. Contact type.

IT-UNI

UNSIDER 28-1959 Quality inspection. The number of observations necessary for estimating the mean with predetermined error limits
UNI 5752-1966 Tests of textiles. Sampling for the estimation of the average of some measurable characteristic.

(U.S.) Telecommunications Industries Association

TIA TSB-1197-2014 Mode Conversion Parameters for Balanced Twisted Pair Cabling
TIA-102.BABB-1999 Project 25 Vocoder Mean Opinion Score Conformance Test (Includes Access to Additional Content)

SCC

NS-EN 10049:2005 Measurement of roughness average Ra and peak count RPc on metallic flat products
DANSK DS/EN 10049:2014 Measurement of roughness average Ra and peak count RPc on metallic flat products
NS-EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products
VDI 2861 BLATT 3-1988 Assembly and handling technology; parameters for industrial robots; testing of parameters
DANSK DS/EN IEC 63047:2021 Nuclear instrumentation – Data format for list mode digital data acquisition used in radiation detection and measurement
BS IEC 63047:2018 Nuclear instrumentation. Data format for list mode digital data acquisition used in radiation detection and measurement
CEI EN IEC 63047:2022 Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement
DANSK DS/ISO/IEC 24039:2022 Information technology – Smart city digital platform reference architecture – Data and service
CEI 81-3:1999 Average values of the number of lightning strikes to the ground per year and per square kilometer of the Municipalities of Italy, in alphabetical order
13/30275599 DC BS EN 10049. Measurement of roughness average Ra and peak count RPc on metallic flat products
DIN EN 10049 E:2013 Draft Document - Measurement of roughness average Ra and peak count RPc on metallic flat products; German version FprEN 10049:2013

ES-UNE

UNE-EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products (Endorsed by AENOR in January of 2014.)
UNE-EN IEC 63047:2021 Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement (Endorsed by Asociación Española de Normalización in March of 2021.)

ZA-SANS

SANS 61290-3:2009 Optical amplifiers - Test methods Part 3: Noise figure parameters

American Society for Testing and Materials (ASTM)

ASTM E1143-05 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1143-05(2010) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1143-05(2015) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1143-99 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1143-05(2019) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter

US-FCR

FCR COE HL-92-9 FINAL REPORT-1992 DEPTH-AVERAGED NUMERICAL MODELING FOR CURVED CHANNELS
FCR COE REMR-HY-11 FINAL REPORT-1993 STREMR: NUMERICAL MODEL FOR DEPTH-AVERAGED INCOMPRESSIBLE FLOW

AT-ON

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions

RO-ASRO

STAS 7122/2-1986 STAT IST ICAL INTERPRETAT ION OF DATA Estimation of the mean and of the difference of two means
STAS 12161-1984 DIGITAL' INTEGRATED CIRCUITS Measuring methods of main electrical parameters
STAS 7122/8-1988 STAT ISTICAL INTERPRETATION OF DATA Tests relating to means and variances
STAS 7302-1980 TRANSVERSE PLANING MACHINES (SHAPER) Basic parameters

CEN - European Committee for Standardization

EN 10049:2005 Measurement of roughness average Ra and peak count RPc on metallic flat products

European Committee for Standardization (CEN)

EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products

IPC - Association Connecting Electronics Industries

IPC D-356-1992 Bare Board Electrical Test Information in Digital Form

Lithuanian Standards Office

LST EN 10049-2006 Measurement of roughness average Ra and peak count RPc on metallic flat products
LST EN IEC 63047:2021 Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement (IEC 63047:2018 + COR1:2020)

SE-SIS

SIS SS 01 42 11-1979 Statistical interpretation of data — Techniques of estimation and tests relating to means and variances

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

QUESTION 135/6-2010 System parameters for digital sound systems

AT-OVE/ON

OVE EN IEC 63047:2020 Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement (english version)

Consumer Electronics Association （U.S.)

CEA-DTVCC-2005 DTV Closed Captioning Test Materials Includes Access to Additional Content [Refer To: CEA CEA DTVCC SET]

Society of Automotive Engineers (SAE)

SAE J1979DA-2024 J1979-DA, Digital Annex of E/E Diagnostic Test Modes
SAE J1979DA-2022 J1979-DA, Digital Annex of E/E Diagnostic Test Modes
SAE J1979DA-2019 J1979-DA, Digital Annex of E/E Diagnostic Test Modes
SAE J1979DA-2011 J1979-DA, Digital Annex of E/E Diagnostic Test Modes
SAE J1979DA-2023 J1979-DA, Digital Annex of E/E Diagnostic Test Modes

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T J.142 FRENCH-2000 Methods for the measurement of parameters in the transmission of digital cable television signals

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 1445-1998 IEEE Standard for Digital Test Interchange Format (DTIF)
IEEE 1445-2016 IEEE Standard for Digital Test Interchange Format (DTIF)

SAE - SAE International

SAE J1979-DA-2011 J1979-DA@ Digital Annex of E/E Diagnostic Test Modes

IN-BIS

IS 13875 Pt.3-1993 Digital Measuring Instruments for Measurement and Control Part 3 Terms, Test and Data Sheet Details of Instruments for Measuring Digital Quantities

American National Standards Institute （ANSI)

ANSI/ATIS 0100503-2002 Network Performance Parameters for Dedicated Digital Services - Definitions and Measurements
ANSI T1.503-2002 Network Performance Parameters for Dedicated Digital Services – Definitions and Measurements

GOST

GOST R 71000-2023 Character semiconductor displays. Parameters system

North Atlantic Treaty Organization Standards Agency

STANAG 4222-1990 STANDARD SPECIFICATION FOR DIGITAL REPRESENTATION OF SHIPBOARD DATA PARAMETERS

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1546-2000 Guide for Digital Test Interchange Format (DTIF) Application

IET - Institution of Engineering and Technology

DIG ANLG INSTR-2003 Digital and Analogue Instrumentation: testing and measurement

Others: