Grain size calculation

Grain size calculation, Total:101 items.

The international standard classification for "Grain size calculation" includes: Surface treatment , Non-destructive testing , Chain drives and their components , Limits and fits .

The Chinese standard classification for "Grain size calculation" includes: Material Protection , X ray, magnetic powder, fluorescent light and other defectoscope , Basic standards and general methods .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5847-1986 Dimensional chain--Methods of calculation
GB/T 5847-2004 Dimensional chain--Methods of calculation
GB/T 31568-2015 Standard test method for determination of crystallite size of ZrO2 coatings by Scherrer equation
GB/T 23413-2009 Determination of crystallite size and micro - strain of nano - Materials - X - ray diffraction line broadening method
GB/T 38532-2020 Microbeam analysis—Electron backscatter diffraction—Measurement of average grain size

未注明发布机构

JIS R 7651:2024 Measurement of lattice parameters and crystallite sizes of carbon materials

Professional Standard - Ferrous Metallurgy

YB/T 4290-2012 Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)

Military Standard of the People's Republic of China-General Armament Department

GJB/Z 20-1991 Dimension chain calculation book
GJB/Z 11-1990 Dimension chain calculation guidelines

IN-BIS

IS 4748-1968 Methods for estimating average grain size of metals
IS 10960 Pt.1-1984 Grain Sizes of Diamond or Cubic Boron Nitride Part 1 Name and Grain Size Distribution

Korean Agency for Technology and Standards (KATS)

KS D ISO 2624-2002(2022) Copper and copper alloys－Estimation of average grain size
KS D ISO 2624-2022 Copper and copper alloys－Estimation of average grain size
KS D 0202-2022 Methods for estimating the average grain size of wrought copper and copper alloy
KS A ISO 9276-2:2014 Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS A ISO 9276-2:2003 Representation of results of particle size analysis-Part 2:Calculation of average particle sizes/diameters and moments from particle size distributions
KS D 0209-1982 DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
KS D 0209-1982(1997) DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
KS B 3617-2012 Grain sizes of diamond or cubic boron nitride
KS D ISO 14250-2014 Steel－Metallographic characterization of duplex grian size and distributions
KS D 0305-2019 Methods for determining average grain size of magnesium alloy sheets
KS D 0305-2014 Methods for determining average grain size of magnesium alloy sheets

CZ-CSN

CSN 42 0464-1962 Methods for estimating the average grain size of non — ferrous metals
CSN 42 0462-1983 Metal testing. Methods for estimating the average grain size of steel and non-ferrous metals
CSN 42 0463-1984 Steel. Method for estimating the grain size of austenite on fractures

SCC

BS 7428:1991 Method for estimating the average grain size of copper and copper alloys
DANSK DS/EN ISO 2624:1995 Copper and copper alloys - Estimation of average grain size
NS-EN ISO 2624:1995 Copper and copper alloys — Estimation of average grain size (ISO 2624:1990)
DANSK DS/EN 16090:2019 Copper and copper alloys – Estimation of average grain size by ultrasound
NS-EN 16090:2011 Copper and copper alloys — Estimation of average grain size by ultrasound
NS-EN 16090:2019 Copper and copper alloys — Estimation of average grain size by ultrasound
DANSK DS/ISO 643:2020 Steels – Micrographic determination of the apparent grain size
BS EN ISO 643:2003 Steels. Micrographic determination of the apparent grain size
BS 4114 CI:1967 Slide rule for calculation of tolerances (inch units)
DIN EN 16090 E:2019 Draft Document - Copper and copper alloys - Estimation of average grain size by ultrasound; German and English version prEN 16090:2019
BS 4490:1969 Methods for the determination of the austenitic grain size of steel
DANSK DS/EN ISO 643:2020 Steels – Micrographic determination of the apparent grain size (ISO 643:2019)
NS-EN ISO 643:2003 Steels - Micrographic determination of the apparent grain size (ISO 643:2003)
NS-EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)

Danish Standards Foundation

DS/EN ISO 2624:1995 Copper and copper alloys - Estimation of average grain size
DS/EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound
DS/EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size

Spanish Association for Standardization (UNE)

UNE 37230:1987 ERRATUM LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
UNE 37230:1986 LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
UNE-EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound
UNE-EN 16090:2020 Copper and copper alloys - Estimation of average grain size by ultrasound
UNE-EN ISO 643:2004 Steels - Micrographic determination of the apparent grain size (ISO 643:2003)

Association Francaise de Normalisation

NF A51-130*NF EN 16090:2019 Copper and copper alloys - Estimation of average grain size by ultrasound
NF EN 16090:2019 Copper and copper alloys - Estimation of average grain size by ultrasound
NF X11-632-2:2001 Representation of results of particle size analysis - Part 2 : calculation of average particle sizes/diameters and moments from particle size distributions.
NF A04-102*NF EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size
NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.

Lithuanian Standards Office

LST EN 16090-2012 Copper and copper alloys - Estimation of average grain size by ultrasound
LST EN ISO 2624:2000 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990)
LST EN 17289-2-2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method

GSO

GSO ISO 2624:2015 Copper and copper alloys -- Estimation of average grain size
GSO ISO 14250:2014 Steel -- Metallographic characterization of duplex grain size and distributions
OS GSO ISO 14250:2014 Steel -- Metallographic characterization of duplex grain size and distributions
BH GSO ISO 14250:2016 Steel -- Metallographic characterization of duplex grain size and distributions
GSO ISO 8486-1:2013 Bonded abrasives -- Determination and designation of grain size distribution -- Part 1: Macrogrits F4 to F220

CEN - European Committee for Standardization

PREN 16090-2019 Copper and copper alloys - Estimation of average grain size by ultrasound
PREN 17289-2-2019 Characterization of bulk materials - Determination of a sizeweighted fine fraction and crystalline silica content - Part 2: Calculation method

German Institute for Standardization

DIN EN 16247-4:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
DIN EN 16090:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
DIN EN 15181/A1:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
DIN EN ISO 2624:1995-08 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990); German version EN ISO 2624:1995
DIN EN ISO 643:2020-06 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03); German version EN ISO 643:2020
DIN EN 16090 E:2019-03 Copper and copper alloys - Estimation of average grain size by ultrasound
DIN EN ISO 643:2023 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023

American Society for Testing and Materials (ASTM)

ASTM E930-99(2015) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-02(2023) Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM RR-E04-1005 1992 E0112-Standard Test Methods for Determining Average Grain Size

British Standards Institution (BSI)

BS EN 16090:2011 Copper and copper alloys. Estimation of average grain size by ultrasound
BS EN 16090:2019 Copper and copper alloys. Estimation of average grain size by ultrasound
BS EN ISO 643:2024 Steels — Micrographic determination of the apparent grain size
BS EN ISO 643:2020 Steels. Micrographic determination of the apparent grain size
19/30385570 DC BS EN 16090. Copper and copper alloys. Estimation of average grain size by ultrasound

HU-MSZT

MSZ 22510/1-1981 Grain size diamond or boron nitride. Specify and size distribution of coarse grains
MSZ 22510/2-1982 Grain size diamond or boron nitride. Coarse grain inspection of designation and particle size distribution
MSZ 6499-1970 Microscopic examination of defined grain sizes for copper and copper alloys

European Committee for Standardization (CEN)

EN 16090:2011 Copper and copper alloys - Estimation of average grain size by ultrasound
EN 17289-2:2020 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method
EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
prEN ISO 643 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023)

Indonesia Standards

SNI 13-4702-1998 Determination of grain size of coal by sieving equipment

Standard Association of Australia （SAA）

ISO 643:2024 Steels - Micrographic determination of the apparent grain size
AS G13:1968 The determination of the austenite grain size of steels comparison method

International Organization for Standardization (ISO)

ISO 643:2019/Amd 1:2020 Steels — Micrographic determination of the apparent grain size
ISO/DIS 643:2023 Steels — Micrographic determination of the apparent grain size

AT-ON

ONORM M 7515-1985 Calculation of dimensions ofchimneys; definitions, calculation procedure
OENORM EN 17289-2-2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method

RO-ASRO

STAS SR ISO 2624:1990 Copper and copper alloys. Estimation of average grain size

RU-GOST R

GOST 21073.0-1975 Non-ferrous metals. Determination of grain size. General requirements
GOST R ISO 14250-2013 Steel. Metallographic characterization of duplex grain size and distribution

US-FCR

FCR FED H-08-4 VOL 4-E-G-6-1988 GENERATOR SIZE CALCULATION SHEET

GM North America

GM GM9613P-1994 Zinc Phosphate Crystal Size Determination Using "Faxfilm" Replication

CH-SNV

SN EN 17289-2-2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method

IT-UNI

UNI EN 17289-2-2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method

Others: grain size,Grain and Grain Size,grain size,Grain size smaller than,Grain Size Particles,grain size grain size,Grain Size Phase Size,grain size grain size,grain size grain size,grain size grain size,size grain,grain size grain size,grain size grain size,Grain Grain Size,grain size grain size,Grain Size and Dimensions,grain size grain size,grain size grain size,grain size grain size