Particle size determination laboratory

Particle size determination laboratory, Total:164 items.

The international standard classification for "Particle size determination laboratory" includes: Laboratory medicine , Test conditions and procedures in general .

The Chinese standard classification for "Particle size determination laboratory" includes: Medical apparatus and devices in general , Fuel oil , Basic standards and general methods .

Group Standards of the People's Republic of China

T/BSPT 7-2024 Particulate technology—Guide for interlaboratory comparison— Particle size detection using dynamic light scattering analyzer
T/BSPT 8-2024 Particulate technology—Guide for interlaboratory comparison— Particle size detection using laser particle size analyzer
T/CSP 14-2024 Particulate technology—Guide for interlaboratory comparison— Particle size detection using dynamic light scattering analyzer
T/CSP 15-2024 Particulate technology—Guide for interlaboratory comparison— Particle size detection using laser particle size analyzer

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21452-2008 Petroleum products—Determination of particulate content of middle distillate fuels—Laboratory filtration method
GB/Z 43280-2023 Medical laboratories—Practical guidance for the estimation of measurement uncertainty
GB/T 27411-2012 Routine methods for evaluation and expression of measurement uncertainty in testing laboratory
SN/T 4562-2016 Guidance on measurement uncertainty for GMO testing laboratories

Professional Standard - Agriculture

CNAS-GL043-2020 Guidelines for the Evaluation of Uncertainty in Measurement of ELISA Tests in Veterinary Testing Laboratories

National Metrological Verification Regulations of the People's Republic of China

JJG 119-2018 Verification Regulation of Laboratory pH Meters
JJG 119-1984 Verification Regulation for Laboratory pH Meters

Czech Standards Institute (UNMZ)

CSN 72 1011-1980 Laboratory determination of apparent density of solid particles of soils
CSN 72 1015-1988 Laboratory determination of com- pactibility of soils
CSN 72 1018-1970 Laboratory determination of relative mature of cohesionless soils
CSN 72 1026-1992 Laboratory determination of the Shear Strength of soils by vane test
CSN 64 0213-1986 Testing of plastics. Determination of granularity
CSN 72 1025-1992 Laboratory determination of unconfined compressive strenght of cohesive soils
CSN 72 1019-1989 Laboratory determination of linear shrinkage of soils
CSN 72 1104-1955 Laboratory determination of water absorption in soil

American Society for Testing and Materials (ASTM)

ASTM D4016-08 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
ASTM C943-17 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM C943-10 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM RR-C05-1005 1978 Interlaboratory Study to Establish Precision Statements for ASTM C886, Scleroscope Hardness Testing of Fine-Grained Carbon and Graphite Materials
ASTM D5452-08 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM E691-21 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-22 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D5452-06 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D5452-23 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM RR-D02-1419 1998 D6217-Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D5452-05 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D6217-21 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM E691-20 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-19e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D969-85(2003) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D5452-12 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM E2653-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E691-18 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM F1903-98(2003) Standard Practice for Testing for Biological Responses to Particles In Vitro

Gosstandart of Russia

GOST 12536-1979 Soils. Methods of laboratory granulometric (grain-size) and microaggragate distribution
GOST 28622-1990 Soils. Laboratory method for determining of froth-heave degree
GOST R ISO 10142-2016 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of grain stability using a laboratory vibration mill
GOST 12536-2014 Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
GOST R 59540-2021 Soils. Standard test methods for degree of salinity content
GOST R 54274-2010 Aviation fuels. Determination of particulate contamination by laboratory filtration method
GOST R 54274-2010(2019) Aviation fuels. Determination of particulate contamination by laboratory filtration method
GOST 28622-2012 Soils. Laboratory method for determination of frost-heave degree
GOST 22733-1977 Soils. A laboratory method for determining maximum density
GOST 12248-1978 Soils. Laboratory methods for determination of shear strength
GOST 22733-2016 Soils. Laboratory method for determining of maximum density
GOST R 70413-2022 Medical laboratories. Practical guidance for the estimation of measurement uncertainty
GOST 12248-2010 Soils. Laboratory methods for determining the strength and strain characteristics

Standards Norway

NS 8012:1982 Geotechnical testing - Laboratory methods - Density of solid particles
NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles
NS 8005-1990 Geotechnical testing - Laboratory methods - Grain-size analysis of soil samples
SN-CEN ISO/TS 17892-4:2004 Geotechnical investigation and testing — Laboratory testing of soil — Part 4: Determination of particle size distribution (ISO/TS 17892-4:2004)
NS 8005:1990 Geotechnical testing — Laboratory methods — Grain-size analysis of soil samples
NS-EN ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016)
SN-CEN ISO/TS 17892-2:2004 Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of density of fine grained soil (ISO/TS 17892-2:2004)
NS 8011-1982 Geotechnical testing - Laboratory methods - Density
NS 8011:1982 Geotechnical testing - Laboratory methods - Density

British Standards Institution (BSI)

BS EN ISO 17892-4:2016 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle size distribution
BS EN ISO 17892-3:2015 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle density
BS PD ISO/TS 20914:2019 Medical laboratories. Practical guidance for the estimation of measurement uncertainty
PD ISO/TS 20914:2019 Medical laboratories. Practical guidance for the estimation of measurement uncertainty
BS ISO 16945:2014 Corrugating medium. Determination of the edge crush resistance after laboratory fluting

Ente Nazionale Italiano di Unificazione

UNI CEN ISO/TS 17892-4:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
UNI EN ISO 17892-3:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
UNI CEN ISO/TS 17892-2:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density of fine- grained soil
UNI ISO/TS 20914:2023 Medical laboratories - Practical guidance for the estimation of measurement uncertainty
UNI EN ISO 17892-4:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
UNI CEN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
UNI EN ISO 7263:2009 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
UNI EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
UNI 7800-1978 Protective coating for laboratory and nuclear installations. Waterproof strength measurement

International Organization for Standardization (ISO)

ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
ISO 10142:1996 Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill
ISO/TS 17892-2:2004 Geotechnical reconnaissance and testing - Laboratory soil testing - Part 2: Determination of the density of fine soil (First edition)
ISO/TS 17892-3:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
ISO/TS 17892-3:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
ISO/TS 17892-4:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO/TS 17892-4:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO/TS 17892-2:2004/Cor 1:2006 Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of density of fine-grained soil — Technical Corrigendum 1
ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method
ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting

GCC Standardization Organization

GSO ISO/TS 17892-4:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
GSO ISO/TS 17892-2:2014 Geotechnical investigation and testing -- Laboratory testing of soil -- Part 2: Determination of density of fine-grained soil
GSO ISO/TS 20914:2024 Medical laboratories — Practical guidance for the estimation of measurement uncertainty
GSO ISO/TS 17892-3:2014 Geotechnical investigation and testing - Laboratory testingof soil - Part 3: Determination of particle density - Pycnometer method
GSO ISO 10142:2013 Carbonaceous materials for use in the production of aluminium -- Calcined coke -- Determination of grain stability using a laboratory vibration mill

Spanish Association for Standardization (UNE)

UNE 51-115-1985 Laboratory filtration determination of particulates in aviation fuel
UNE-EN ISO 17892-3:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15)
UNE-EN ISO 17892-4:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016)
UNE 43-343-1985 Laboratory glass. Laboratory sintered filters. Porous scale classification and designation

Bureau of Philippine Standards

PNS ISO 17892-3:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
PNS ISO 17892-4:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution

German Institute for Standardization

DIN ISO/TS 17892-4:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO/TS 17892-4:2004); German version CEN ISO/TS 17892-4:2004
DIN EN ISO 17892-4:2017-04 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016); German version EN ISO 17892-4:2016
DIN EN ISO 17892-3 E:2014-10 Geotechnical Investigation and Laboratory Testing of Test Soils Part 3: Determination of Particle Density (Draft)
DIN EN ISO 17892-3:2016-07 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15); German version EN ISO 17892-3:2015
DIN ISO/TS 17892-2:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density of fine grained soil (ISO/TS 17892-2:2004); German version CEN ISO/TS 17892-2:2004
DIN 18125-1:1997-08 Laboratory tests for determination of soil density
DIN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density, Pycnometer method (ISO/TS 17892-3:2004); German version CEN ISO/TS 17892-3:2004
DIN EN ISO 17892-3 E:2014-08 Draft Document - Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO/DIS 17892-3:2014); German version prEN ISO 17892-3:2014
DIN EN ISO 17892-3 E:2014 Draft Document - Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO/DIS 17892-3:2014); German version prEN ISO 17892-3:2014
DIN 12876-3:2001 Electrical laboratory devices - Laboratory circulators and baths - Part 3: Determination of ratings of laboratory baths
DIN 12785:1977 Laboratory glassware; special purpose laboratory thermometers
DIN EN ISO 17892-4 E:2014 Draft Document - Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO/DIS 17892-4:2014); German version prEN ISO 17892-4:2014
DIN 12785:1977-04 Laboratory glassware; special purpose laboratory thermometers
DIN EN ISO 17892-4 E:2014-08 Laboratory examination of soils for geotechnical investigation and examination Part 4: Determination of particle size distribution (draft)
DIN EN ISO 3675:1999 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998); German version EN ISO 3675:1998

Danish Standards Foundation

DANSK DS/EN ISO 17892-3:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
DANSK DS/EN ISO 17892-4:2016 Geotechnical investigation and testing – Laboratory testing of soil – Part 4: Determination of particle size distribution (ISO 17892-4:2016)
DANSK DS/ISO/TS 20914:2019 Medical laboratories – Practical guidance for the estimation of measurement uncertainty
DS/CEN ISO/TS 17892-4:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO/TS 17892-4:2004)
DS/CEN ISO/TS 17892-2:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density of fine grained soil (ISO/TS 17892-2:2004)
DS/EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting

Society of Automotive Engineers (SAE)

SAE J1330_200003 Photometry Laboratory Accuracy Guidelines
SAE J1330_201409 Photometry Laboratory Accuracy Guidelines
SAE J1330_198208 Photometry Laboratory Accuracy Guidelines
SAE J1330_200712 Photometry Laboratory Accuracy Guidelines
SAE J1330-2014 Photometry Laboratory Accuracy Guidelines
SAE J1330-2000 Photometry Laboratory Accuracy Guidelines
SAE J1330-1982 Photometry Laboratory Accuracy Guidelines

Swedish Institute for Standards

SIS-CEN ISO/TS 17892-2:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density of fine-grained soil (ISO/TS 17892-2:2004)
SIS-CEN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method (ISO/TS 17892-3:2004)

Association Francaise de Normalisation

NF P94-512-4*NF EN ISO 17892-4:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 4 : Determination of particle size distribution
NF P94-512-3*NF EN ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3 : determination of particle density
NF EN ISO 17892-3:2015 Geotechnical reconnaissance and testing - Laboratory tests on soils - Part 3: determination of the density of solid particles
NF P94-411:2002 Rocks - Determination of the propagation speed of ultrasonic waves in the laboratory - Transparency method
XP ISO/TS 20914:2020 Medical biology laboratories - Practical recommendations for estimating measurement uncertainty

Argentine Institute of Standardization

IRAM 122-1959 Experimental method for determination of austenite grain size in steel

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 4195-2012 Soils.Laboratory methods for determination of density
TCVN 6897-2010 Corrugating medium.Determination of the flat crush resistance after laboratory fluting

Korean Agency for Technology and Standards (KATS)

KS M ISO 10142:2004 Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill
KS P ISO TS 20914-2022 Medical laboratories — Practical guidance for the estimation of measurement uncertainty
KS M ISO 15167:2003 Petroleum products－Determination of particulate content of middle distillate fuels－Laboratory filtration method
KS M ISO 10142-2019 Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill
KS M ISO 10142-2024 Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill

European Committee for Standardization (CEN)

EN ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution

Canadian Standards Association (CSA)

CSA ISO/TS 20914:2020 Medical laboratories — Practical guidance for the estimation of measurement uncertainty
CAN/CSA-ISO/TS 20914-2020 Medical laboratories - Practical guidance for the estimation of measurement uncertainty
CSA ISO TS 20914:2020 A practical guide to estimating measurement uncertainty in medical laboratories

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO/TS 20914:2024 Medical laboratories — Practical guidance for the estimation of measurement uncertainty
BH GSO ISO 10142:2016 Carbonaceous materials for use in the production of aluminium -- Calcined coke -- Determination of grain stability using a laboratory vibration mill
BH GSO ASTM D5452:2015 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

Bureau of Indian Standards

IS 18325-2023 Medical Laboratories Practical Guidance For The Estimation Of Measurement Uncertainty
IS 1448-190-2021 PETROLEUM PRODUCTS DETERMINATION OF PARTICULATE CONTENT OF MIDDLE DISTILLATE FUELS LABORATORY FILTRATION METHOD
IS 2720-36-1987 Methods of test for soils: Part 36 Laboratory determination of permeability of granular soils (Constant head)
IS 12634-1989 Rock joints—Direct shear strength—Laboratory determination methods

Yugoslav Association for Standardization

JUS B.E8.131-1991 Insulating glass units. Determination of dew point temperature, Laboratory test
JUS H.N8.224-1991 Fluting DETERMINATION OF RESISTANCE TO PRESSURE WITH A FLAT PLATE AFTER MAKING WAVES IN THE LABORATORY

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO/TS 17892-3:2014 Geotechnical investigation and testing - Laboratory testingof soil - Part 3: Determination of particle density - Pycnometer method
OS GSO ISO 10142:2013 Carbonaceous materials for use in the production of aluminium -- Calcined coke -- Determination of grain stability using a laboratory vibration mill

Standard Association of Australia （SAA）

SA TS ISO 20914:2021 Medical laboratories - Practical guidance for the estimation of measurement uncertainty

Cuban Institute of Standards and Metrology

NC 54-353-1986 Construction Materials and Products. Soils. Determination of Humidity in Laboratory

Magyar Szabványügyi Testület

MSZ 18000/7-1971 Laboratory testing of brown coal. Humidity detection
MSZ 18000/6-1971 Laboratory testing of brown coal. Density detection
MSZ 12000/19.lap-1968 Black mineral laboratory testing. temperature check
MSZ 12000/15.lap-1968 Black mineral laboratory testing. Hardness testing

CN-STDBOOK

图书 a-4383 Top-down uncertainty assessment of quality control technology in inspection and testing laboratories

American National Standards Institute （ANSI)

ANSI/ASTM E691:2013 PRACTICE FOR CONDUCTING AN INTERLABORATORY STUDY TO DETERMINE THE PRECISION OF A TEST METHOD
ANSI/ASTM E2653a:2009 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer than Six Participating Laboratories

National Standardisation Body (ASRO)

STAS SR EN ISO 7263:1996 Corrugating medium - Determination of the flat crush resistance after laboratory fluting