self cyclic voltammetry

self cyclic voltammetry, Total:96 items.

The international standard classification for "self cyclic voltammetry" includes: Occupational safety. Industrial hygiene , Geology. Meteorology. Hydrology .

The Chinese standard classification for "self cyclic voltammetry" includes: Hygiene, safety and labor protection , Oceanographic instrumentation .

Professional Standard - Petroleum

SY/T 6561-2003 Safety rules for extracting oil through pouring natural gas
SY/T 6115-2012 Self-circulation Well-flushing Equipment

Group Standards of the People's Republic of China

T/NBFS 2-2022 Operation and management specifications for coin self-circulation system
T/QGCML 665-2023 Automatic circulation hot air dryer
T/CASME 1324-2024 Hydraulic power head for automatic workpiece cycle processing
T/CEMIA 034-2023 Test method of orbital energy for materials used in organic light emitting diode (OLED)display- -Cyclic voltammetry(CV)

Taiwan Provincial Standard of the People's Republic of China

CNS 12558-1989 Method of Test for Solar Water Heater System (Automatic Cycle)
CNS 12565-1989 Basic Environmental Testing Procedures Part 2: Tests, Test D _b : Damp Heat, Cycle (12+12-Hour Cycle)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23247-2009 Autonomous drifting profiler

未注明发布机构

AS 1926.3:2010(R2016) Swimming pool safety water circulation system

Professional Standard - Electricity

DL/T 1750-2017 Overhaul and maintenance regulations for horizontal natural circulation waste heat boiler of gas-steam combined cycle unit

Professional Standard - Nuclear Industry

EJ/T 20078-2014 Safety requirement of nuclear fuel cycle facilities

British Standards Institution (BSI)

BS EN ISO 4210-4:2023 Cycles. Safety requirements for bicycles - Braking test methods
BS EN ISO 4210-3:2023 Cycles. Safety requirements for bicycles. Common test methods
BS EN 15918:2011+A2:2017 Cycles. Cycle trailers. Safety requirements and test methods
BS EN 15194:2017+A1:2023 Cycles. Electrically power assisted cycles. EPAC Bicycles
BS EN 17404:2022 Cycles. Electrically power assisted cycles. EPAC Mountain bikes
BS EN ISO 4210-6:2023 Cycles. Safety requirements for bicycles. Frame and fork test methods
BS EN ISO 4210-9:2023 Cycles. Safety requirements for bicycles. Saddles and seat-post test methods
21/30442426 DC BS EN 15194 AMD1. Cycles. Electrically power assisted cycles. EPAC Bicycles
21/30393417 DC BS EN ISO 8098. Cycles. Safety requirements for bicycles for young children
19/30375863 DC BS EN 17404. Cycles. Electrically power assisted cycles. EPAC Mountain bikes
22/30445957 DC BS EN 15194:2017 AMD2. Cycles. Electrically power assisted cycles. EPAC Bicycles
BS EN ISO 4210-8:2023 Cycles. Safety requirements for bicycles. Pedal and drive system test methods
PD ISO/TS 4210-10:2020 Cycles. Safety requirements for bicycles. Safety requirements for electrically power assisted cycles (EPACs)
BS EN IEC 62892:2019 Extended thermal cycling of PV modules. Test procedure
BS PD IEC/TS 62782:2016 Photovoltaic (PV) modules. Cyclic (dynamic) mechanical load testing
PD IEC/TS 62782:2016 Photovoltaic (PV) modules. Cyclic (dynamic) mechanical load testing
BS EN ISO 11243:2023 Cycles. Luggage carriers for bicycles. Requirements and test methods
21/30393393 DC BS EN ISO 4210-5. Cycles. Safety requirements for bicycles. Part 5. Steering test methods
21/30393381 DC BS EN ISO 4210-3. Cycles. Safety requirements for bicycles. Part 3. Common test methods
21/30393389 DC BS EN ISO 4210-4. Cycles. Safety requirements for bicycles. Part 4. Braking test methods
22/30453277 DC BS EN 15496. Cycles. Requirements and test methods for cycle locks
19/30345956 DC BS ISO 4210-10. Cycles. Safety requirements for bicycles - Part 10. Safety requirements for electrically power assisted cycles (EPACs)
19/30407304 DC BS ISO 4210-10.2. Cycles. Safety requirements for bicycles - Part 10. Safety requirements for electrically power assisted cycles (EPACs)
22/30393665 DC BS EN ISO 11243.3. Cycles. Luggage carriers for bicycles. Requirements and test methods
21/30393409 DC BS EN ISO 4210-9. Cycles. Safety requirements for bicycles. Part 9. Saddles and seat-post test methods
21/30393397 DC BS EN ISO 4210-6. Cycles. Safety requirements for bicycles. Part 6. Frame and fork test methods
21/30393401 DC BS EN ISO 4210-7. Cycles. Safety requirements for bicycles. Part 7. Wheels and rims test methods

SCC

AENOR UNE-EN 15918+A1:2013 Cycles. Trailers for cycles. Safety requirements and test methods.
BS PD ISO/TS 4210-10:2020 Cycles. Safety requirements for bicycles-Safety requirements for electrically power assisted cycles (EPACs)
MIL MIL-F-51228-1967 FAN, VANEAXIAL, 300 CFM, 400 CYCLE, 416 VOLTS, 0.7 HP
CEI EN IEC 62892:2019 Extended thermal cycling of PV modules - Test procedure
DANSK DS/EN IEC 62892:2019 Extended thermal cycling of PV modules – Test procedure
VDI 4480 BLATT 3-1999 Throughput of automatic carousel storage
DANSK DS/IEC TS 62782:2016 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing
MIL MIL-PRF-32001-1997 FAN, CIRCULATING-HEAT DISTRIBUTION, SELF-POWERED
MIL MIL-S-24188-1965 SYNCHRONIZING CONTROL EQUIPMENT, 60 CYCLES, 450 VOLTS, NAVAL SHIPBOARD
AENOR UNE-EN ISO 11243:2017 Cycles. Bicycle luggage rack. Requirements and test methods. (ISO 11243:2016).
CAN/CSA-B45.7-1988 Chemical toilets, self-contained and recirculating, for camping vehicles
CAN/CSA-B214-2001(R2006) Installation Code for Hydronic Heating Systems
CAN/CSA-B214-2007 Installation Code for Hydronic Heating Systems
CAN 3-O302.1-M77-1977 Mesurage des Bois Ronds
DIN IEC /TS 62782:2017 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing (IEC/TS 62782:2016)
CSA B214-16:2016 Installation code for hydronic heating systems
AS 2243.9:1991 Safety in laboratories - Recirculating fume cabinets
CSA B45.7-1999 Self-Contained, Recirculating, Chemically Controlled Toilets for Use in Recreational Vehicles
DIN EN 62892 E:2018 Draft Document - Test procedure for extended thermal cycling of PV modules (IEC 82/1344/CDV:2017); German and English version prEN 62892:2017

International Organization for Standardization (ISO)

ISO/TS 4210-10:2020 Cycles — Safety requirements for bicycles — Part 10: Safety requirements for electrically power assisted cycles (EPACs)

American National Standards Institute （ANSI)

ANSI/ASTM E1171:2002 Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments

American Society for Testing and Materials (ASTM)

ASTM E1171-15(2019) Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ASTM E1171-15 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ASTM D8301-21 Standard Test Method for Determination of the Content of Nitroxide Radical (4-Hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl) in Butadiene, Styrene and Isoprene by Cyclic Voltammetry Method

KR-KS

KS R ISO 4210-3-2017 Cycles - Safety requirements for bicycles - Part 3: Common test methods
KS R ISO 4210-5-2017 Cycles - Safety requirements for bicycles - Part 5: Steering test methods
KS R ISO 4210-4-2017 Cycles - Safety requirements for bicycles - Part 4: Braking test methods
KS R ISO 4210-6-2017 Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods
KS R ISO 11243-2019 Cycles — Luggage carriers for bicycles — Requirements and test methods
KS R ISO 4210-7-2017 Cycles - Safety requirements for bicycles - Part 7: wheels and rims test methods
KS R ISO 4210-9-2017 Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods
KS R ISO 4210-1-2017 Cycles - Safety requirements for bicycles - Part 1: Terms and definitions
KS R ISO 4210-8-2017 Cycles - Safety requirements for bicycles - Part 8: Pedal and drive system test methods

ES-UNE

UNE-EN IEC 62892:2020 Extended thermal cycling of PV modules - Test procedure

Association Francaise de Normalisation

NF EN IEC 62892:2019 Extended thermal cycling of PV modules - Test procedure
NF EN 1870-5+A2:2012 Sécurité des machines pour le travail du bois - Machines à scie circulaire - Partie 5 : scies circulaires combinées à table et à coupe transversale ascendante
NF EN 1870-5/IN2:2012 Sécurité des machines pour le travail du bois - Machines à scie circulaire - Partie 5 : scies circulaires combinées à table et à coupe transversale ascendante

GOSTR

GOST R 58646-2019 Photovoltaic modules. Cyclic (dynamic) mechanical load testing

GSO

GSO IEC 62892:2021 Extended thermal cycling of PV modules - Test procedure
BH GSO IEC 62892:2022 Extended thermal cycling of PV modules - Test procedure
BH GSO IEC TS 62782:2022 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing
GSO IEC TS 62782:2021 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing

International Electrotechnical Commission (IEC)

IEC 62892:2019 Extended thermal cycling of PV modules - Test procedure
IEC TS 62782:2016 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing

Korean Agency for Technology and Standards (KATS)

KS R ISO 11243:2019 Cycles — Luggage carriers for bicycles — Requirements and test methods
KS B 8296-2015 Solar water heaters(Thermosiphon, Forced circulation, Evacuated-tube integrated type)
KS E 4089-2007 Closed－circuit oxygen self rescuers