Medical optical fiber transmittance

Medical optical fiber transmittance, Total:386 items.

The international standard classification for "Medical optical fiber transmittance" includes: Medical equipment , Radiographic equipment , Reinforced plastics , Advanced ceramics , Glass in general , Alcohols. Ethers , Plastics in general , Coals , Fiber and cables , Radiographic films , Glass , Auxiliary materials and additives for plastics , Plastics , Optics and optical measurements .

The Chinese standard classification for "Medical optical fiber transmittance" includes: Medical optical instrument and endoscope , Medical radiographic equipment , Optical Measurement , Fibre reinforced composites , Special ceramics , Basic organic chemicals , Basic standards and general methods for synthetic resin and plastic , Coal analysis methods , Optical communication equipment , Basic standards and general methods for photosensitive material , Material and component for instrument and meter , Diesel locomotives .

国家药监局

YY/T 0758-2021 General requirements for medical laser fiber

Professional Standard - Medicine

YY/T 0094-2004 X-ray fluorescent screens for medical diagnosis
YY/T 0094-2013 X-ray fluorescent screens for medical diagnosis
YY/T 0758-2009 General requirements for therapeutic laser fiber

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3792-2020 Graphene film light transmittance test light transmittance instrument method

Taiwan Provincial Standard of the People's Republic of China

CNS 12368-1988 Method of Test for Fiber Optic Devices ( FOTP-44 Refractive Index Profile, Refracted Ray Method)
CNS 11789-1986 Method of Test for Fiber Optic Devices (FOTP-46 Spectral Attenuation Measurement for Long-Length, Graded-Index Optical Fibers)
CNS 12363-1988 Method of Test for Fiber Optic Devices ( FOTP-95 Optical Fibers and Cable Absolute Optical Power Test)
CNS 12373-1988 Method of Test for Fiber Optic Devices ( FOTP-58 Core Diameter Measurement of Graded-Index Optical Fibers )
CNS 12087-1987 Method of Test for Fiber Optic Devices (FOPT-55 Fluid Penetration Test for Filled Fiber Optic Cable)
CNS 11705-1986 Method of Test for Fiber Devices (FOTP-20 Change of Optical Transmittance)
CNS 11993-1987 Method of Test for Fiber Optic Devices (FOTP-50 Light-Launch Conditions for Long Length Graded-Index Optical Fiber Spectral Attenuation Measurement)

National Metrological Verification Regulations of the People's Republic of China

JJG 813-2013 Fiber Optical Power Meters
JJG 581-2016 Lasers for Medicine
JJG 813-1993 Optical Fiber Power Meter

Professional Standard - Building Materials

JC/T 782-2010 Test method for transmissivity of glass fibre reinforced plastics
JC/T 2020-2010 Test method for transmittance of translucent fine ceramics
JC/T 782-1987 Glass fiber reinforced plastics.Test method of the transmissivity

Group Standards of the People's Republic of China

T/CEMIA 012-2018 Ytterbium doped optical fiber for fiber laser
T/QGCML 4000-2024 Low infrared transmittance infrared cut filter
T/SXS 010-2023 Medical fine tube laser cutting machine
T/CSA 071-2022 Performance test method of flexible light source in optical medical equipment
T/SHDSGY 102-2022 High power fiber grating
T/CAME 29-2021 Thulium-doped fiber laser equipment

National Metrological Technical Specifications of the People's Republic of China

JJF 1225-2009 Calibration Specification for Transmittance Meter of Automobile

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40415-2021 Determination of light transmittance for the photovoltaic glass module used in building
GB/T 14571.4-2022 Test method of ethylene glycol for industrial use—Part 4：Determination of ultraviolet transmittance—Ultraviolet spectrophotometric method

未注明发布机构

JIS C 6184:2024 Test methods of fiber optic power meters
JIS T 1553:2023 Optics and optical instruments -- Medical endoscopes and endotherapy devices
ANSI/TIA/EIA-455-95-A-2000(2005) FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
ASTM RR-D20-1180 1993 D1003-Test Method for Haze and Luminous Transmittance of Transparent Plastics
AS/NZS 3200.2.8-1994 +/AMD 1:1999 Medical electrical equipment - Particular requirements for safety - Therapeutic X-ray generators
DIN EN ISO 13468-1 E:2019-04 Determination of total light transmittance of plastic transparent materials Part 1: Single beam meter (draft)
DIN EN 61315 E:2017-01 Calibration of fibre-optic power meters
CSA Z386-2020 Safe use of lasers in health care
DIN EN 170:1992 Ultraviolet protection filter = transmission requirements and recommended use
JIS T 2001:2024 Phototherapy apparatus for home use
DIN EN ISO 13468-2:2022 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument
ANSI/TIA-455-95-B-2019 FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
ANSI/TIA-455-20-B-2004(2013) FOTP-20 IEC 60793-1-46: Optical Fibres - Part 1-46: Measurement Methods and Test Procedures- Monitoring of Changes in Optical Transmittance
DIN EN ISO 13468-2 E:2021-04 Determination of total light transmittance of plastic transparent materials Part 2: Double beam instrument (draft)

Military Standard of the People's Republic of China-General Armament Department

GJB/Z 48.1-1993 Military optical fiber series spectrum optical fiber
GJB 10253-2021 High Power Fiber Laser Specifications

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14571.4-2008 glycol for industrial use - Determination of ultraviolet transmittance - Ultraviolet spectrophotometric method
GB/T 15972.46-2008 Specifications for optical fibre test methods - Part 46: Measurement methods and test procedures for transmission and optical characteristics - Monitoring of changes in optical tran
GB/T 2410-1980 Transparent plastics--Transmissivity and haze test
GB/T 2410-2008 Determination of the luminous transmittance and haze of transparent plastics
GB/T 2566-2010 Determination of transmittance for low rank coal
GB/T 2566-1995 Determination of transmittance for low rank coal
GB/T 24791.1-2009 Photography—Sensitometry of screen/film systems for medical X-radiography—Part 1:Determination of sensitometric curve shape,speed and average gradient
GB/T 7962.12-1987 Colourless optical glass test methods; Spectral internal transmittance

工业和信息化部

WJ/T 742-2014 Test method for transmittance of glue used in optical instruments
JC/T 2610-2021 UItraviolet quartz glass tube for fiber drawing curing
JC/T 2401-2017 Transparent electro-optic ceramics applied in electro-optic modulators

Professional Standard - Military and Civilian Products

WJ 2139-1993 Specification for Transmissive Low Light Resolution Panels
WJ 742-1994 Test method for transmittance of glue used in optical instruments

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34323-2017 Carbon black--Determination of light transmittance of water dispersion--Spectrophotometer method

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1612-2015 General technical specification for high power fiber laser cutting machine

Professional Standard - Agriculture

GB 2410-1980 Transparent plastics;Transmissivity and haze test

未注明发布机构

DIN EN ISO 13468-1 E:2019-04 Determination of total light transmittance of plastic transparent materials Part 1: Single beam meter (draft)
JIS T 1553:2023 Optics and optical instruments -- Medical endoscopes and endotherapy devices
ANSI/TIA-455-95-B-2019 FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
ANSI/TIA/EIA-455-95-A-2000(2005) FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
ANSI/TIA-455-20-B-2004(2013) FOTP-20 IEC 60793-1-46: Optical Fibres - Part 1-46: Measurement Methods and Test Procedures- Monitoring of Changes in Optical Transmittance
CSA Z386-2020 Safe use of lasers in health care
DIN EN ISO 13468-2 E:2021-04 Determination of total light transmittance of plastic transparent materials Part 2: Double beam instrument (draft)
AS/NZS 3200.2.8-1994 +/AMD 1:1999 Medical electrical equipment - Particular requirements for safety - Therapeutic X-ray generators
JIS C 6184:2024 Test methods of fiber optic power meters
DIN EN 170:1992 Ultraviolet protection filter = transmission requirements and recommended use
ASTM RR-D20-1180 1993 D1003-Test Method for Haze and Luminous Transmittance of Transparent Plastics
DIN EN 61315 E:2017-01 Calibration of fibre-optic power meters
DIN EN ISO 13468-2:2022 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument
JIS T 2001:2024 Phototherapy apparatus for home use

Professional Standard - Railway

TB/T 2214-1991 Determination Method for Light Transmittance of Hydraulic Transmission Oil

Professional Standard - Machinery

JB/T 9395.3-1999 Measuring method for transmittance of optical crystal
JB/T 9495.3-1999 Measuring method for transmittance of optical crystal

Professional Standard - Light Industry

QB/T 5855-2023 Test for light transmittance of colored glass

Professional Standard - Chemical Industry

HG/T 5077-2016 Optical functional films. Measuring method of the near infrared spectral transmittance

German Institute for Standardization

DIN 58141-2:2024-02 Measurement of fiber optic elements - Part 2: Determination of spectral transmittance of light guides / Note: Date of issue 2024-01-05*Intended as replacement for DIN 58141-2 (2012-09).
DIN 58141-2:2012-09 Measurement of fiber optic elements - Part 2: Determination of spectral transmittance of light guides; Text in German and English
DIN EN IEC 61315:2020-07 Calibration of fibre-optic power meters (IEC 61315:2019); German version EN IEC 61315:2019 / Note: DIN EN 61315 (2006-09) remains valid alongside this standard until 2022-05-03.
DIN EN ISO 13468-1:2019-10 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019); German version EN ISO 13468-1:2019
DIN VDE 0753-4:2009 Guideline for the safe use of medical products in dialysis treatment - Text in German and English
DIN EN ISO 13697:2006-08 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006); German version EN ISO 13697:2006
DIN EN ISO 13468-1:1997 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996); German version EN ISO 13468-1:1996
DIN EN ISO 13468-1:2019 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019)
DIN 58141-2:1989 Testing of fibre optic elements; determination of spectral transmittance of light guides
DIN EN ISO 13468-2:2022-04 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021); German version EN ISO 13468-2:2021
DIN ISO 14490-5:2007 Optics and optical instruments - Test methods for telescopic systems - Part 5: Test methods for transmittance (ISO 14490-5:2005)；English version of DIN ISO 14490-5:2007-06
DIN 4522-4:1993-04 Photographic lenses; method for measuring the spectral transmittance
DIN 58141-5:1993 Testing of fibre optic elements; determination of the rate of broken fibres of light and image conductors

RU-GOST R

GOST 18250-1980 Medical apparatus and devices. Fiber lightguides. Connecting dimensions
GOST R IEC 60793-1-46-2014 Optical fibres. Part 1-46. Measurement methods and test procedures. Monitoring of changes in optical transmittance
GOST R 59742-2021 Optics and photonics. Lasers and laser-related equipment. Optical elements for laser equipment. Test methods for specular reflectance and regular transmittance
GOST R ISO 5799-2006 Direct-exposing medical and dental radiographic film/process systems. Determination of ISO speed and ISO average gradient
GOST R ISO 9236-3-2009 Sensitometry of screen/film systems for medical radiography. Part 3. Determination of sensitometric curve shape, speed and average gradient for mammographiy
GOST R 55037-2012 Optics and optical instruments. Medical endoscopes and endotherapy devices. Particular requirements. Test methods
GOST R 53469-2009 Optics and optical instruments. Medical endoscopes and endotherapy devices. Part 1. General requirements
GOST R IEC 61262-6-1999 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 6. Determination of the contrast ratio and veiling glare index

SCC

NS-EN 379:1994 Spesifications for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance
DIN 58141-2 E:2012 Draft Document - Measurement of fiber optic elements - Part 2: Determination of spectral transmittance of light guides; Text in German and English
BS EN ISO 13468-2:2006 Plastics. Determination of the total luminous transmittance of transparent materials-Double-beam instrument
BS ISO 13468-2:1999 Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
CEI EN 60793-1-46:2004 Optical fibres Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
DANSK DS/EN 60793-1-46:2002 Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
DANSK DS/ISO 8600-5:2020 Optics and photonics – Medical endoscopes and endotherapy devices – Part 5: Determination of optical resolution of rigid endoscopes with optics
CSA Z386-2014(R2019) Safe use of lasers in health care
CAN/CSA Z386-1992 Laser Safety in Health Care Facilities
BS EN 61290-1-3:1998 Optical fibre amplifiers. Basic spectrum analyzers-Optical power meter
LIA Z136.3-2011 Safe Use of Lasers in Health Care Facilities
BS EN 61315:1997 Calibration of fibre optic power meters
DANSK DS/EN IEC 61315:2019 Calibration of fibre-optic power meters
DANSK DS/ISO 13468-1:2019 Plastics – Determination of the total luminous transmittance of transparent materials – Part 1: Single-beam instrument
LIA Z136.3-2005 Safe Use of Lasers in Health Care Facilities
CSA Z386-2008(R2013) Safe Use of Lasers in Health Care Facilities
LIA Z136.3-2018 Safe Use of Lasers in Health Care Facilities
AS/NZS 4173:1994 Guide to the safe use of lasers in health care
CEI EN 61315:2007 Calibration of fibre-optic power meters
DANSK DS/ISO 13468-2:2021 Plastics – Determination of the total luminous transmittance of transparent materials – Part 2: Double-beam instrument
CEI EN IEC 61315:2019 Calibration of fibre-optic power meters
DANSK DS/EN 61315:2006 Calibration of fibre-optic power meters
BS ISO 8600-1:2005 Optics and photonics. Medical endoscopes and endotherapy devices-General requirements
UNE-EN ISO 8599:1997 OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES. DETERMINATION OF THE SPECTRAL AND LUMINOUS TRANSMITTANCE. (ISO 8599:1994).
NS-EN ISO 8599:1996 Optics and optical instruments — Contact lenses — Determination of the spectral and luminous transmittance (ISO 8599:1994)
DANSK DS/EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
CAN/CSA-Z386-1992 Laser Safety in Health Care Facilities
BS PD IEC TR 62653:2020 Guideline for safe operation of medical equipment used for haemodialysis treatments
CSA Z386-2001 Laser Safety in Health Care Facilities
NS-EN ISO 13697:2006 Optics and photonics — Lasers and laser-related equipment — Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)
DANSK DS/IEC/TR 62653:2012 Guideline for safe operation of medical equipment used for haemodialysis treatments
DANSK DS/IEC TR 62653:2020 Guideline for safe operation of medical equipment used for haemodialysis treatments
DANSK DS/EN ISO 13468-1:2019 Plastics – Determination of the total luminous transmittance of transparent materials – Part 1: Single-beam instrument (ISO 13468-1:2019)
NS-EN ISO 13468-2:2021 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021)
AENOR UNE-EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999)
NS-EN ISO 13468-2:2006 Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument (ISO 13468-2:1999)
BS EN IEC 60794-1-31:2018 Optical fibre cables-Generic specification. Optical cable elements. Optical fibre ribbon
NS-EN ISO 13468-1:1996 Plastics — Determination of total luminous transmittance of transparent materials — Part 1: Single-beam instrument (ISO 13468-1:1996)
DANSK DS/EN ISO 13468-2:2021 Plastics – Determination of the total luminous transmittance of transparent materials – Part 2: Double-beam instrument (ISO 13468-2:2021)
AENOR UNE-EN ISO 13468-1:2020 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019)
NS-EN ISO 13468-1:2019 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019)
NS-EN ISO 9913-2:2000 Optics and optical instruments — Contact lenses — Part 2: Determination of oxygen permeability and transmissibility by the coulometric method (ISO 9913-2:2000)
CEI EN 61290-2-3:1999 Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for optical power parameters - Optical power meter
NS-EN ISO 9913-1:1998 Optics and optical instruments — Contact lenses — Part 1: Determination of oxygen permeability and transmissibility with the FATT method (ISO 9913-1:1996)
AENOR UNE-EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules. Part 1-4: Encapsulants. Measurement of optical transmittance and calculation of optical transmittance weighted by the solar spectrum, yellowness index and wavelength...

Korean Agency for Technology and Standards (KATS)

KS A 4445-1991(2016) X-ray tables and stands for medical use
KS C 6928-1995 Test methods of optical power meters for optical fiber
KS C 6928-2020 Test methods of optical power meters for optical fiber
KS C 6928-1995(2020) Test methods of optical power meters for optical fiber
KS B ISO 8599:2004 Optics and optical instruments-Contact lenses-Determination of the spectral and luminous transmittance
KS B ISO 8599-2014(2019) Optics and optical instruments — Contact lenses — Determination of the spectral and luminous transmittance
KS B ISO 8599:2014 Optics and optical instruments — Contact lenses — Determination of the spectral and luminous transmittance
KS B ISO 8599-2019 Optics and optical instruments — Contact lenses — Determination of the spectral and luminous transmittance
KS M ISO 13468-2-2022 Plastics－Determination of the total luminous transmittance of transparent materials－Part 2：Double-beam instrument
KS P ISO 9913-1-2014(2019) Optics and optical instruments — Contact lenses — Part 1: Determination of oxygen permeability and transmissibility with the polarographic method
KS M ISO 13468-2-2007(2017) Plastics－Determination of the total luminous transmittance of transparent materials－Part 2：Double-beam instrument
KS M ISO 13468-1-2022 Plastics－Determination of the total luminous transmittance of transparent materials－Part 1：Single beam instrument
KS M ISO 13468-2-2007(2022) Plastics－Determination of the total luminous transmittance of transparent materials－Part 2：Double-beam instrument
KS M ISO 13468-1-2007(2022) Plastics－Determination of the total luminous transmittance of transparent materials－Part 1：Single beam instrument
KS C IEC 61315:2020 Calibration of fiber-optic power meters
KS C IEC 61315:2014 Calibration of fiber-optic power meters
KS C IEC 61315:2009 Calibration of fiber-optic power meters
KS C 7514-1985 Spot light and flood light lamps
KS B ISO 8600-1:2016 Optics and optical instruments－Medical endoscopes and endoscopic accessories－Part 1：General requirements
KS C 7514-2014 Spot light and flood light lamps
KS B ISO 8600-1:2006 Optics and optical instruments-Medical endoscopes and endoscopic accessories-Part 1:General requirements
KS B 5426-2013(2018) Method for measuring spectral transmittance of a photographic lens
KS C IEC 60794-2-30:2006 Optical fibre cables－Part 2－30：Indoor cables－Family specification for optical fibre ribbon cables
KS C 7514-2003 Spot light and flood light lamps
KS V 8427-2004 Floodlighting incandescent lamps for marine use
KS B 5426-1988 Method for measuring spectral transmittance of a photographic lens
KS M ISO 22891:2020 Paper — Determination of transmittance by Paper — Determination of transmittance by
KS C IEC 60825-8-2013(2019) Safety of laser products ― Part 8: Guidelines for safe use of medical laser equipment
KS M ISO 22891:2014 Paper — Determination of transmittance by diffuse reflectance mesurement
KS C IEC 60825-8:2013 Safety of laser products ― Part 8: Guidelines for safe use of medical laser equipment
KS C IEC 60825-8:2002 Safety of laser products-Part 8:Guidelines for safe use of medical laser equipment
KS B 5426-2013 Method for measuring spectral transmittance of a photographic lens
KS V 8427-1985 Floodlighting incandescent lamps for marine use
KS B ISO 15368-2021 Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
KS P ISO 9913-1-2023 Optics and optical instruments — Contact lenses — Part 1: Determination of oxygen permeability and transmissibility with the polarographic method
KS P ISO 9913-2-2023 Optics and optical instruments — Contact lenses — Part 2: Determination of oxygen permeability and transmissibility by the coulometric method
KS B ISO 15368-2006(2016) Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
KS C IEC 61262-6:2003 Medical electrical equipment－Characteristics of electro-optical X-ray image intensifiers－Part 6：Determination of the contrast ratio and veiling glare index
KS B ISO 15368-2006(2021) Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements

British Standards Institution (BSI)

BS ISO 8600-5:2005 Optics and photonics - Medical endoscopes and endotherapy devices - Determination of optical resolution of rigid endoscopes with optics
BS ISO 8600-5:2020 Optics and photonics. Medical endoscopes and endotherapy devices. Determination of optical resolution of rigid endoscopes with optics
BS EN 60793-1-46:2002 Optical fibres - Measurement methods and test procedures - Monitoring of changes in optical transmittance
BS EN ISO 13468-1:2019 Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument
14/30293824 DC BS ISO 9050. Glass in building. Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
BS EN ISO 13468-2:1999 Plastics - Determination of the total luminous transmittance of transparent materials - Double-beam instrument
BS EN ISO 13468-2:2021 Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
BS IEC 60825-8:2000 Safety of laser products - Guidelines for the safe use of medical laser equipment
BS EN 61315:2006 Calibration of fibre-optic power meters
BS EN ISO 8599:1997 Optics and optical instruments — Contact lenses — Determination ofthe spectral and luminous transmittance
BS ISO 8600-6:2005 Optics and photonics - Medical endoscopes and endotherapy devices - Vocabulary
BS ISO 8478:2017 Optics and photonics. Camera lenses. Measurement of ISO spectral transmittance
BS EN ISO 13468-1:1997 Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument
BS EN IEC 61315:2019 Calibration of fibre-optic power meters
20/30349145 DC BS ISO 8600-5. Optics and photonics. Medical endoscopes and endotherapy devices. Part 5. Determination of optical resolution of rigid endoscopes with optics
BS EN ISO 9913-1:1998 Optics and optical instruments — Contact lenses — Part 1 : Determination ofoxygen permeability and transmissibility by the FATT method
BS ISO 26723:2020 Plastics. Determination of total luminous transmittance and reflectance
BS EN 61280-1-1:1998 Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable
20/30384001 DC BS ISO 13142. Optics and photonics. Lasers and laser-related equipment. Cavity ring-down method for high-reflectance and high-transmittance measurements
BS EN IEC 60869-1:2018 Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices. Generic specification
23/30469798 DC BS EN IEC 60793-1-46. Optical fibres - Part 1-46. Measurement methods and test procedures. Monitoring of changes in optical transmittance
PD IEC TR 62653:2020 Guideline for safe operation of medical equipment used for haemodialysis treatments
BS ISO 15368:2021 Optics and photonics. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
19/30368985 DC BS ISO 26723. Plastics. Determination of total luminous transmittance and reflectance
BS EN ISO 9913-2:2000 Optics and optical instruments - Contact lenses - Part 2: Determination of oxygen permeability and transmissibility by the coulometric method
BS EN 60794-2-42:2008 Optical fibre cables - Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres
BS EN 62220-1:2004 Medical electrical equipment. Characteristics of digital X-ray imaging devices. Determination of the detective quantum efficiency
BS EN 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules. Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
BS PD IEC/TR 62048:2014 Optical fibres. Reliability. Power law theory
20/30352222 DC BS ISO 15368. Optics and photonics. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements

International Organization for Standardization (ISO)

ISO 9050:1990 Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance, and related glazing factors
ISO 9050:2003 Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
ISO 8599:1994 Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance
ISO 13142:2021 Optics and photonics — Lasers and laser-related equipment — Cavity ring-down method for high-reflectance and high-transmittance measurements
ISO 26723:2020 Plastics — Determination of total luminous transmittance and reflectance
ISO 13468-1:2019 Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument
IEC/TR 62653:2012 Guidelines for the safe use of medical products in dialysis treatment
IEC TR 62653:2012 Guidelines for the safe use of medical products in dialysis treatment
IEC TR 62653:2012 Guidelines for the safe use of medical products in dialysis treatment
ISO/FDIS 23237:2023 Glass in building – Laminated solar photovoltaic glass for use in buildings – Light transmittance measurement method
ISO 23237:2023 Glass in building – Laminated solar photovoltaic glass for use in buildings – Light transmittance measurement method
IEC TR 62653:2012 Guidelines for the safe use of medical products in dialysis treatment
ISO/DIS 23237.2 Glass in building – laminated solar photovoltaic glass for use in buildings – light transmittance measurement method
ISO 13468-1:1996 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument
ISO 13468-2:1999 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument
ISO 8600-1:2005 Optics and photonics - Medical endoscopes and endotherapy devices - Part 1: General requirements

Association Francaise de Normalisation

NF C74-309:1973 ELECTROMEDICAL EQUIPMENT ACTINOLOGY APPARATUS
NF EN 60793-1-46:2002 Optical fibers - Part 1-46: measurement methods and test procedures - Control of variations in optical transmittance
NF S11-687:1997 Optics and optical instruments. Contact lenses. Determination of the spectral and luminous transmittance.
NF C93-840-1-46*NF EN 60793-1-46:2002 Optical fibres - Part 1-46 : measurement methods and test procedures - Monitoring of changes in optical transmittance
NF EN IEC 62667:2018 Medical electrical devices - Light ion beam medical devices - Performance characteristics
NF T51-065-1*NF EN ISO 13468-1:2019 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1 : single-beam instrument
NF C93-803*NF EN 61315:2006 Calibration of fibre-optic power meters
NF EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and transmittance of laser optical components
NF C93-803:1997 Calibration of fibre optic power meters.
NF C71-025*NF EN 60598-2-25:1995 Luminaires - Part 2 : particular requirements - Section 25 : luminaires for use in clinical areas of hospitals and health care buildings
NF EN ISO 13468-2:2021 Plastics - Determination of the total luminous flux transmittance of transparent materials - Part 2: double beam instrument
NF C74-226*NF EN 61262-6:1994 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 6 : determination of the contrast ratio and veiling glare index.
NF EN ISO 13468-1:2019 Plastics - Determination of the total luminous flux transmittance of transparent materials - Part 1: single beam instrument
NF T51-065-2*NF EN ISO 13468-2:2021 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2 : double-beam instrument
NF T51-065-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2 : double-beam instrument.
NF S10-049*NF ISO 15368:2021 Optics and photonics - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
NF ISO 15368:2021 Optics and photonics - Measurement of the reflection factor of flat surfaces and the transmittance of parallel plane elements
NF EN IEC 61315:2019 Calibration of power meters for fiber optic devices
NF EN 62788-1-4:2017 Procedures for measuring materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of solar-weighted photonic transmittance, yellowness index...
NF EN 62788-1-4/A1:2020 Procedures for measuring materials used in photovoltaic modules - Part 1-4: encapsulants - Measurement of optical transmittance and calculation of solar-weighted photonic transmittance, yellowness index...
NF S10-049:2003 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements.
NF EN 61290-2-3:1998 Optical fiber amplifiers - Basic specification - Part 2-3: test methods for optical power parameters. Optical power meter

Standard Association of Australia （SAA）

CD HEALTH-2006 31 Healthcare Standards on CD
AS/NZS 4173:2018 Safe use of lasers and intense light sources in health care
AS/NZS 4356.5:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the detective quantum efficiency
AS/NZS 3200.2.8:1994 Medical electrical equipment - Particular requirements for safety - Therapeutic X-ray generators

European Committee for Standardization (CEN)

prEN 410-1990 Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing characteristics
EN ISO 8599:1996 Optics and Optical Instruments - Contact Lenses - Determination of the Spectral and Luminous Transmittance ISO 8599 : 1994
EN ISO 13468-2:2021 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021)
EN ISO 13468-1:2019 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019)

Japanese Industrial Standards Committee (JISC)

JIS C 5934:1999 General rules of lenses for fiber optic transmission
JIS T 1553:2005 Optics and optical instruments -- Medical endoscopes and endotherapy devices
JIS C 5935:2005 Measurement methods of lenses for fiber optic transmission
JIS C 6186:2008 Calibration of fiber optic power meters
JIS C 6186:1999 Calibration of fiber optic power meters
JIS C 6186:2020 Calibration of fiber optic power meters
JIS Z 4831:2000 Protective devices against diagnostic medical X-radiation
JIS K 7361-1:1997 Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 1: Single beam instrument

Danish Standards Foundation

DS/EN 379:1994 Specification for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance
DS/EN 60793-1-46:2002 Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
DS/ISO 8600-5:2020 Optics and photonics – Medical endoscopes and endotherapy devices – Part 5: Determination of optical resolution of rigid endoscopes with optics
DS/EN ISO 13468-1:1997 Plastics - Determination of total luminous transmittance of transparent materials - Part 1: Single-beam instrument
DS/EN ISO 13468-2:2006 Plastics – Determination of the total luminous transmittance of transparent materials – Part 2: Double-beam instrument
DS/ISO 13468-2:2021 Plastics – Determination of the total luminous transmittance of transparent materials – Part 2: Double-beam instrument
DS/EN 61315:2006 Calibration of fibre-optic power meters
DS/EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
DS/EN ISO 13468-2:2021 Plastics – Determination of the total luminous transmittance of transparent materials – Part 2: Double-beam instrument (ISO 13468-2:2021)
DS/IEC/TR 62653:2012 Guideline for safe operation of medical equipment used for haemodialysis treatments

ZA-SANS

SANS 60793-1-46:2001 Optical fibres Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
SANS 61315:2006 Calibration of fibre-optic power meters

GSO

GSO ISO 9050:2007 Glass in building – Determination of light Transmittance , Solar direct transmittance , Total Solar Energy transmittance , Ultraviolet transmittance and related glazing factors
OS GSO ISO 9050:2007 Glass in building – Determination of light Transmittance , Solar direct transmittance , Total Solar Energy transmittance , Ultraviolet transmittance and related glazing factors
OS GSO IEC 60793-1-46:2007 Optical fibres – Part 1-46:Measurement methods and test procedures – Monitoring of changes in optical transmittance
BH GSO ISO 8600-5:2016 Optics and photonics - Medical endoscopes and endotherapy devices - Part 5: Determination of optical resolution of rigid endoscopes with optics
GSO IEC 60793-1-46:2007 Optical fibres – Part 1-46:Measurement methods and test procedures – Monitoring of changes in optical transmittance
BH GSO ISO 22466:2023 Traditional Chinese medicine — Laser acupoint devices
GSO ISO 22466:2023 Traditional Chinese medicine — Laser acupoint devices
BH GSO ISO 13468-2:2016 Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 2: Double-beam instrument
OS GSO ISO 13468-2:2014 Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 2: Double-beam instrument
GSO ISO 13142:2022 Optics and photonics — Lasers and laser-related equipment — Cavity ring-down method for high-reflectance and high-transmittance measurements
BH GSO ISO 13142:2023 Optics and photonics — Lasers and laser-related equipment — Cavity ring-down method for high-reflectance and high-transmittance measurements
GSO IEC 61315:2015 Calibration of fibre-optic power meters
OS GSO IEC 61315:2015 Calibration of fibre-optic power meters
BH GSO IEC 61315:2016 Calibration of fibre-optic power meters
BH GSO ISO 13697:2015 Optics and photonics - Lasers and laser-related equipment – Test methods for specular reflectance and regular transmittance of optical laser components
OS GSO ISO 13697:2014 Optics and photonics - Lasers and laser-related equipment – Test methods for specular reflectance and regular transmittance of optical laser components
OS GSO ASTM D1003:2014 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
BH GSO ISO 8600-6:2017 Optics and photonics -- Medical endoscopes and endotherapy devices -- Part 6: Vocabulary
OS GSO ISO 8600-6:2016 Optics and photonics -- Medical endoscopes and endotherapy devices -- Part 6: Vocabulary
OS GSO ISO 4851:2015 Personal eye-protectors -- Ultra-violet filters -- Utilisation and transmittance requirements
BH GSO ASTM D1003:2015 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
GSO ISO 8600-6:2016 Optics and photonics -- Medical endoscopes and endotherapy devices -- Part 6: Vocabulary
GSO IEC/TR 62653:2015 Guideline for safe operation of medical equipment used for haemodialysis treatments
GSO ISO 15368:2015 Optics and optical instruments -- Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
OS GSO ISO 15368:2015 Optics and optical instruments -- Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
GSO ASTM E1175:2021 Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance,and Absorptance of Materials Using a Large Diameter Integrating Sphere
BH GSO ASTM E1175:2022 Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance,and Absorptance of Materials Using a Large Diameter Integrating Sphere

TIA - Telecommunications Industry Association

TIA/EIA-455-95A-2000 FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
TIA-455-95-B-2019 FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
EIA-455-95-1986 FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables
TIA/EIA-455-20A-1994 FOTP-20A Measurement of Change in Optical Transmittance
TSB-143-2007 Fiber Optic Power Meters: Measurement and Application Issues
EIA/TIA-455-46A-1990 FOTP-46 Spectral Attenuation Measurement for Long-Length@ Graded-Index Optical Fibers
TIA/EIA-455-50B-1998 FOTP-50 Light Launch Conditions for Long-Length Graded-Index Optical Fiber Spectral Attenuation Measurements
455-50A-1987 FOTP-50 Light Launch Conditions for Long-Length Graded-Index Optical Fiber Spectral Attenuation Measurements
455-86-1983 FOTP-86 Fiber Optic Cable Jacket Shrinkage

American National Standards Institute （ANSI)

ANSI/TIA-455-95A-2000 Absolute Optical Power Test for Optical Fibers and Cables
ANSI/TIA/EIA 455-95A-2000 Absolute Optical Power Test for Optical Fibers and Cables
ANSI Z136.3-2011 Standard for Safe Use of Lasers in Health Care
ANSI/TIA/EIA 455-44B-1992 Fiber Optics - Refractive Index Profile, Refracted Ray Method
IEC/TR 62653:2020 RLV Guideline for safe operation of medical equipment used for haemodialysis treatments
ANSI/UL 1651-2008 Standard for Optical Fiber Cable
ANSI/TIA-455-86-A-2014 FOTP-86 Optical Fiber Cable Jacket Shrinkage

BSI

LIA Z136.3-2024 Safe Use of Lasers in Health Care

ES-UNE

UNE-EN 60793-1-46:2002 Optical fibres -- Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance (Endorsed by AENOR in July of 2002.)
UNE 40610:2020 Agrotextiles. Determination of transmittance: Direct and diffuse light
UNE-EN ISO 13468-2:2022 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021)
UNE-EN ISO 13468-1:2020 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019)
UNE-EN 60793-1-34:2006 Optical fibers -- Part 1-34: Measurement methods and test procedures - Fiber curl Optical fiber. Part 1-34: Measurement methods and test procedures. Fiber crimping (IEC 60793-1-34:2006) (Endorsed by AENOR in August of 2006.)
UNE-EN IEC 61315:2019 Calibration of fibre-optic power meters (Endorsed by Asociación Española de Normalización in July of 2019.)

American Society for Testing and Materials (ASTM)

ASTM E972-96(2021) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
ASTM D1003-11e1 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D1003-07 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM E387-84(1995)e1 Standard Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method
ASTM E387-04 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E971-11 Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
ASTM D1003-21 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM E387-04(2009) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM D1003-92 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D1003-11 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D1003-07e1 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM E1348-22 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E387-04(2022) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E387-04(2014) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method

VN-TCVN

TCVN 7737-2007 Glass in building.Method for determination of light transmittance, light reflectance, total solar energy transmittance and ultraviolet transmittance

NZ-SNZ

AS/NZS 4173:2004 Guide to the Safe Use of Lasers in Health Care

CENELEC - European Committee for Electrotechnical Standardization

EN 61315:1997 Calibration of Fibre Optic Power Meters
EN 61290-2-3:1998 Optical Fibre Amplifiers - Basic Specification Part 2-3: Test Methods for Optical Power Parameters Optical Power Meter

IT-UNI

UNI EN ISO 13468-2:2021 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument

International Electrotechnical Commission (IEC)

IEC 61315:2019 Calibration of fibre-optic power meters
IEC 61315:2019 RLV Calibration of fibre-optic power meters
IEC 60794-2-30:2008 Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables
IEC 61315:2005 Calibration of fibre optic power meters
IEC TR 62653:2020 RLV Guideline for safe operation of medical equipment used for haemodialysis treatments
IEC TR 62653:2020 Guideline for safe operation of medical equipment used for haemodialysis treatments
IEC TR 60825-8:1999 Safety of laser products - Part 8: Guidelines for the safe use of medical laser equipment
IEC TR 62048:2002 Optical fibres - Reliability - Power law theory
IEC TR 62048:2014 Optical fibres - Reliability - Power law theory
IEC TR 62048:2011 Optical fibres - Reliability - Power law theory

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 61315:2019 Calibration of fibre-optic power meters
EN 61315:2006 Calibration of Fibre Optic Power Meters

(U.S.) Telecommunications Industries Association

TIA TSB-143-2007 Fiber Optic Power Meters: Measurement and Application Issues
TIA-455-20-B-2004 FOTP-20 IEC 60793-1-46: Optical Fibres- Part 1- 46: Measurement Methods and Test Procedures- Monitoring of Changes in Optical Transmittance
TIA-455-20-B-2004(2013) FOTP-20 IEC 60793-1-46: Optical Fibres- Part 1- 46: Measurement Methods and Test Procedures- Monitoring of Changes in Optical Transmittance
TIA-455-86-A-2014 FOTP-86 Optical Fiber Cable Jacket Shrinkage

KR-KS

KS C IEC 61315-2020 Calibration of fiber-optic power meters
KS M ISO 22891-2020 Paper — Determination of transmittance by Paper — Determination of transmittance by
KS B 5426-2023 Method for measuring spectral transmittance of a photographic lenses

ES-AENOR

UNE 20-570-1989 Characteristics of X-ray tube focus for medical diagnosis

Lithuanian Standards Office

LST EN 60793-1-46-2003 Optical fibres. Part 1-46: Measurement methods and test procedures. Monitoring of changes in optical transmittance (IEC 60793-1-46:2001)
LST EN ISO 13468-2:2021 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021)
LST EN ISO 13468-1:2000 Plastics - Determination of total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996)
LST EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)
LST EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999)
LST EN 61315-2006 Calibration of fibre-optic power meters (IEC 61315:2005)

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0888-246-2002 Optical fibres - Part 1-46: Measurement methods and test procedures; Monitoring of changes in optical transmittance (IEC 60793-1-46:2001); German version EN 60793-1-46:2002

Association of German Mechanical Engineers

DVS 2243 Beiblatt 1-2007 Determination of transmittance of laser beam transparent joint partners during laser transmission welding of thermoplastics
DVS 2243 Beiblatt 1-2006 Determination of transmittance of laser beam transparent joint partners during laser transmission welding of thermoplastics

AT-ON

OENORM EN ISO 13468-2:2021 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021)

CZ-CSN

CSN 84 0010-1982 Modical optical radialors. Terminology and clo?initions
CSN 34 1720-1969 Medical X-ray stations

Canadian Standards Association (CSA)

CSA Z386-2014 Safe use of lasers in health care (Fourth Edition)

AENOR

UNE-EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999)
UNE-EN ISO 13697:2007 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)
UNE-EN ISO 13468-1:1997 PLASTICS. DETERMINATION OF THE TOTAL LUMINOUS TRANSMITANCE OF TRANSPARENT MATERIALS. PART 1: SINGLE-BEAM INSTRUMENT. (ISO 13468-1:1996).

International Telecommunication Union (ITU)

ITU-T G.651.1-2007 Characteristics of a 50/125 ?m multimode graded index optical fibre cable for the optical access network (Study Group 15)

BELST

STB 1640-2006 Road vehicles. Procedure for measuring of light transmittance of glass

Others: