Electrochemical workstation tests electrolyte conductivity
Electrochemical workstation tests electrolyte conductivity, Total:97 items.
The international standard classification for "Electrochemical workstation tests electrolyte conductivity" includes: Chemical laboratories. Laboratory equipment , Wind turbine systems and other alternative sources of energy , Analytical chemistry in general , Chemical analysis of metals , Adhesives , Thermoplastic materials .
The Chinese standard classification for "Electrochemical workstation tests electrolyte conductivity" includes: Chemical Measurement , Electrochemical, thermochemistry and optical profile type analyzer , New energy and others , Fuel oil , Technical management , Material composition analysis instrument and environment detection instrument in general , Nonmetallic materials used for aviation and aerospace , Basic standards and general methods for synthetic resin and plastic .
National Metrological Technical Specifications of the People's Republic of China
- JJF 1357-1990 O.T.N. for Primary Standard of Electrolytic Conductivity
- JJF 1910-2021 Calibration Specification for Electrochemical Workstations
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 12582-1990 Liquid hydrocarbons-Determination of electrical conductivity-Precision meter
- GB/T 42737-2023 Code for commissioning of electrochemical energy storage station
- GB/T 42716-2023 Guide for modeling of electrochemical energy storage power station
- GB/T 44111-2024 Code of maintenance test for electrochemical energy storage station
- GB/T 44133-2024 Technical guide for smart electrochemical energy storage station
- GB/T 43686-2024 Guide for post evaluation of electrochemical energy storage station
- GB/T 42318-2023 Guide for environmental impact assessment of electrochemical energy storage station
- GB/T 42314-2023 Guide for hazard sources identification of electrochemical energy storage station
- GB/T 44117-2024 Code of practice for model parameters testing of electrochemical energy storage station
- GB/T 20245.3-2013 Expression of performance of electrochemical analyzers—Part 3:Electrolytic conductivity
- GB/T 27503-2011 Test solutions of electrolytic conductivity analyzer - Preparation method of sodium chloride solutions
- GB/T 44134-2024 Planning guide for electrochemical energy storage station in power system
- GB/T 36548-2024 Test code for electrochemical energy storage station connected to power grid
- GB/T 42312-2023 Guide for production safety emergency response plan of electrochemical energy storage station
Professional Standard - Electron
- SJ/Z 9125.3-1987 Expression of performance of electrochemical analyzers-Part 3: Electrolytic conductivity
Group Standards of the People's Republic of China
- T/CEC 385-2020 DL/T860 engineering application information model of electrochemical energy storage power station
- T/CEC 786-2023 Coordinated measurement method of water vapor pH and conductivity in combined cycle power station
- T/CEC 680-2022 Guidelines for Technical Supervision of Electrochemical Energy Storage Power Stations
- T/CES 198-2023 Technical specification for testing of electrochemical energy storage power station
- T/XDHX 005-2023 Guidance of grid-connected dispatching acceptance for electrochemical energy storage power station
- T/CEC 679-2022 Technical guidelines for grid-connected safety evaluation of electrochemical energy storage power stations
- T/CEC 461-2021 Operating procedures for performance testing of lithium-ion batteries used in electrochemical energy storage power stations
- T/CES 170-2022 Technical specification for test of automatic generation control and automatic voltage control systems in electrochemical energy storage power station
- T/CES 171-2022 Test specification for monitoring and control system of electrochemical energy storage power station
- T/CEC 460-2021 Lithium-ion battery maintenance guidelines for electrochemical energy storage power stations
- T/CES 192-2023 Guidelines for energy efficiency evaluation of electrochemical energy storage power stations
- T/CES 199-2023 Technical guidelines for supervision of battery cabin for electrochemical energy storage power station
Professional Standard - Electricity
- DL/T 1816-2018 Coding guidelines for the identification system of electrochemical energy storage power stations
Professional Standard - Machinery
- JB/T 8278-1999 Test solutions of electric conductivity analyzers preparation method of sodium chloride solutions
国家能源局
- NB/T 42089-2016 Technical standard for power conversion of system eletrochemical energy storage station
- NB/T 42146-2018 Zinc bromine flow battery. Test methods of electrode、membrane and electrolyte
Professional Standard - Energy
- NB/T 42006-2013 Electrolyte for Vanadium Flow Battery-test Method
- NB/T 11225-2023 Test method for Zinc-nickle flow battery Electrolyte
Professional Standard - Aerospace
- QJ 1523-1988 Test Method for Resistivity of Conducting Resin
Professional Standard - Building Materials
- JC/T 2778-2023 Test method for conductivity of solid electrolyte for gas sensors
Anhui Provincial Standard of the People's Republic of China
- DB34/T 2579-2015 Methods for chemical analysis of copper electrolytes - Determination of chlorine content - Automatic potentiometric titration
Professional Standard - Chemical Industry
- HG/T 2905-1997 Plastics--phenolic resins--determination of electrical conductivity of resin extracts
CZ-CSN
- CSN 33 3220-1986 Electric-engineering rules. Common directions for electric substations
- CSN 83 0520 Cast.25-1976 Physico-chemical analysis of drinking water. Determination of specific eleetrolytical conductivity
- CSN 83 0530 Cast.10-1978 Chemical and physinal analysis of surface water. Determination oí specific alectrolytical conductiiiity
- CSN 34 3107-1970 Safety regulations for operations and work at fusion and solution elektrolysis
- CSN 03 8522-1988 Chemical methods for checking of electro baths. Acid copper plating bath
- CSN 03 8523-1988 Chemical methods for checking of elec-trolytic baths. Copper cyanide and brass plating baths
British Standards Institution (BSI)
- BS EN 60746-3:2002 Expression of performance of electrochemical analyzers - Electrolytic conductivity
- BS EN 60746-3:2002(2003) Expression of performance of electrochemical analyzers — Part 3 : Electrolytic conductivity
- BS 7755-3.4:1995 Soil quality. Chemical methods. Determination of the specific electrical conductivity
- BS ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics. Oxide-ion-conducting solid electrolytes
German Institute for Standardization
- DIN EN 60746-3:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity (IEC 60746-3:2002 + Corrigendum 2002); German version EN 60746-3:2002
- DIN EN 60746-3:2003-05 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity (IEC 60746-3:2002 + Corrigendum 2002); German version EN 60746-3:2002 / Note: DIN IEC 60746-3 (1988-01) remains valid alongside this standard until 2005-09-01.
- DIN 53779:1979 Determination of the electric conductivity and the specific resistance (resistivity) of aqueous extracts
SCC
- CEI EN 60746-3:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
- AENOR UNE-EN 60746-3:2004 Expression of performance of electrochemical analyzers — Part 3: Electrolytic conductivity
- DANSK DS/EN 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
- AWWA ACE99523 Chemical Detail of Electrolyzed Salt Brine Solutions
- BS 6438-3:1986 Electrochemical analyzers-Method for specifying performance of electrolytic conductivity analyzers
- VDI 3401 BLATT 3-1993 Electrochemical mold removal; treatment of electrolyte solutions, waste water and sludge
- BS 6068-2-2.35:1989 Water quality. Physical, chemical and biochemical methods-Method for the determination of electrical conductivity
- BS 2044:1953 Tests for resistivity of conductive and anti-static rubbers
International Electrotechnical Commission (IEC)
- IEC 60746-3:2002/COR1:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity; Corrigendum 1
- IEC 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
- IEC 60746-3:1985 Expression of performance of electrochemical analyzers - Part 3 : Electrolytic conductivity
Korean Agency for Technology and Standards (KATS)
- KS C IEC 60746-3-2019 Expression of performance of electrochemical analyzers — Part 3: Electrolytic conductivity
- KS C IEC 60746-3-2014(2019) Expression of performance of electrochemical analyzers — Part 3: Electrolytic conductivity
GSO
- BH GSO IEC 60746-3:2016 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
- OS GSO OIML R56:2008 Standard solutions reproducing the conductivity of electrolytes
- OS GSO IEC 60746-3:2015 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
- GSO IEC 60746-3:2015 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
European Committee for Electrotechnical Standardization(CENELEC)
- EN 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
Danish Standards Foundation
- DS/EN 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
- DS/EN 60746-3/Corr.1:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
AENOR
- UNE-EN 60746-3:2004 Expression of performance of electrochemical analyzers -- Part 3: Electrolytic conductivity
IN-BIS
- IS 13673 Pt.3-1993 Expression of Electrochemical Analyzer Performance Part 3 Electrolytic Conductivity
- IS 3025 Pt.14-1984 Methods of sampling and testing of water and wastewater (physics and chemistry) Part 14 Specific conductivity (Wheatstone bridge, conductivity cells)
RU-GOST R
- GOST 8.457-2000 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring specific conductivity of liguids
- GOST 8.457-1982 State system for ensuring the uniformity of measurements. State primary standards and state verification schedule for means of measuring specific conductivity of solutions of electrolytes within the range of 1kh10 in minus 4 degree to 1kh10 in 2 degree S
Association Francaise de Normalisation
- NF EN 60746-3:2004 Expression of the operating qualities of electrochemical analyzers - Part 3: electrolytic conductivity
- NF X20-379:1979 Gas analysis. Oxygen analysis. Electrochemical methods with liquid or gelled electrolyte.
- NF T90-111:1975 Water testing - Estimate of dissolved salt content from the determination of theoretical electrical conductivity
Lithuanian Standards Office
- LST EN 60746-3-2003 Expression of performance of electrochemical analyzers. Part 3: Electrolytic conductivity (IEC 60746-3:2002)
American Society for Testing and Materials (ASTM)
- ASTM E1698-95(2010) Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
- ASTM UOP678-04 Dissolved Molecular Oxygen in Liquid Hydrocarbons by Electrochemical Detection
- ASTM UOP678-88 Dissolved Molecular Oxygen in Liquid Hydrocarbons by Electrochemical Detection
- ASTM D4399-05 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
- ASTM G71-81(1998)e1 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
CL-INN
- INDITECNOR 62-8 Industrial water: testing, measurement of conductivity
PL-PKN
- PN Z04094 Arkusz 02-1974 Air purity protection Tests for carbon monoxide Determination of carbon monoxide in work station by conductometric method
TR-TSE
- TS 2570-1977 SODIUM PERBORATES FOR INDUSTRIAL USE DETERMINATION OF RATE OF SOLUTION CONDUCTIVITY METHOD
International Organization for Standardization (ISO)
- ISO 3123:1976 Sodium perborates for industrial use; Determination of rate of solution; Conductivity method
- ISO 2878:1987 Rubber, vulcanized; Antistatic and conductive products; Determination of electrical resistance
- ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for conductivity measurement of ion-conductive fine ceramics - Part 1: Oxide-ion-conducting solid electrolytes
Universal Oil Products Company (UOP)
- UOP 678-2004 DISSOLVED MOLECULAR OXYGEN IN LIQUID HYDROCARBONS BY ELECTROCHEMICAL DETECTION
CO-ICONTEC
- ICONTEC 3223-1991 Electronics. Method for measuring thermal conductivity of liquids
AT-ON
- ONORM S 5088-1991 Measurement and working conditions for the determination of soundpower of turbomachine sets in thermal power stations
BE-NBN
- NBN T 03-358-1981 Sodium perborates for industrial use - Determination of rate of solution - Conductivity method
American National Standards Institute (ANSI)
- ANSI/ASTM D4308:2013 Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter