Minimum weight

Minimum weight, Total:104 items.

The international standard classification for "Minimum weight" includes: Road vehicles in general , Small craft , Application of statistical methods .

The Chinese standard classification for "Minimum weight" includes: Basic standards and general methods , Devices for small vessel , Mathematics .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12540-2009 Measurement method of minimum turning diameter, minimum turning circle diameter and sway value of automobiles
GB/T 19315-2003 Small craft - Maximum load capacity
GB/T 12540-2009 Minimum turning circle diameter minimum turning clearance circle diameter and out value test method for motor vehicles

未注明发布机构

AS 1141.20.1:2000(R2019) Methods for sampling and testing aggregates - Average least dimension - Direct measurement (nominal size 10 mm and greater)
DIN 1305:1968 Mass, as weighed value, force, weight force, weight, load; concepts
AS 1141.20.1:2000/Amdt 1:2019 Methods for sampling and testing aggregates - Average least dimension - Direct measurement (nominal size 10 mm and greater)
DIN 18232-9 E:2015-12 Smoke and heat control systems - Part 9: Minimum values for power supplies according to DIN EN 12101-10 and control equipment according to ISO 21927-9
DIN 18232-9 E:2020-06 Smoke and heat control systems - Part 9: Minimum values for power supplies according to DIN EN 12101-10 and control equipment according to ISO 21927-9
DIN 18232-9 E:2021-05 Smoke and heat control systems - Part 9: Minimum values for power supplies according to DIN EN 12101-10 and control equipment according to ISO 21927-9
AS 1141.20.2:2000(R2014) Methods for sampling and testing aggregates - Average least dimension - Direct measurement (nominal sizes 5 mm and 7 mm)
DIN EN 10314 E:2013-11 Method for the derivation of minimum values of proof strength of steel at elevated temperatures

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 33260.4-2018 Capability of detection—Part 4:Methodology for comparing the minimum detectable value with a given value

CZ-CSN

CSN 02 4606-1977 Rolling bearings. Minimal value of baaic dynamic load rating and basic static load rating

IX-ICAO

ICAO 322-2014 Guidelines for the Implementation of GNSS Lateral Separation Minima based on VOR Separation Minima
ICAO 341-2015 Guidelines for the Implementation of Lateral Separation Minima
ICAO 334-2014 Guidelines for the Implementation of Lateral Separation Minima

SAE - SAE International

SAE AS8032-1995 AIRCRAFT GENERAL PURPOSE ELECTRICAL WIRE@ MINIMUM

NL-NEN

NEN 2517-1982 Radiographic testing of weids in steel - Minimum image quality values

Association Francaise de Normalisation

NF EN 60719:1994 Calculation of the minimum and maximum values of the average external dimensions of conductors and cables with circular copper cores and nominal voltage not more than 450/750 V
NF A03-035:2003 Method for the derivation of minimum values of proof strength of steel at elevated temperatures.
NF X06-048-4*NF ISO 11843-4:2004 Capability of detection - Part 4 : methodology for comparing the minimum detectable value with a given value.
NF A49-031:1979 Steel tubes. Bending radii. Recommended minimum values for unalloyed steel tubes.
NF A03-035*NF EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures

AT-ON

ONORM M 2060-1980 Pneumatic cy linders; minimum indications for technical documents

SCC

AWWA WQTC62384 Contaminant Minimum-Dose Threshold Concentrations for Water Quality Sensors
VDI 2310 BLATT 28-2008 Maximum emission values — Maximum emission values for cadmium to protect farm animals
DIN 18232-9 E:2021 Draft Document - Smoke and heat control systems - Part 9: Minimum values for power supplies according to DIN EN 12101-10 and control equipment according to ISO 21927-9
VDI 2310 BLATT 41-2012 Maximum emission values — Maximum emission values for selenium to protect farm animals and the food derived from them
NS-EN 10314:2002 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
DANSK DS/EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
NS-EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
UNE-EN 10314:2004 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
DANSK DS/ISO 11843-4:2004 Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value
AS 1170.2:1975 Rules for minimum design loads on structures (known as the SAA Loading Code) - Wind forces
VDI 2310 BLATT 27-1998 Maximum emission values — Maximum emission values for lead to protect farm animals
VDI 2310 BLATT 29-2000 Maximum emission values — Maximum emission values for thallium to protect farm animals
VDI 2310 BLATT 37-2015 Maximum emission values — Maximum emission values for molybdenum to protect farm animals and the food derived from them
VDI 2310 BLATT 39-2011 Maximum emission values — Maximum emission values for chromium to protect farm animals and the food derived from them
NS-EN ISO 14946:2021 Small craft – Maximum load capacity (ISO 14946:2021)

RO-ASRO

STAS 11200/146-1980 GRAPHICAL SYMBOL FOR ADJUSTMENT TO A MINIMUM
STAS 11200/142-1979 GRAPHICAL SYMBOL FOR ANTI RAIN-CLUTTER (POSITION OF MINIMUM)
STAS 11200/141-1979 Graphical symbols= GRAPHICAL SYMBOL FOR ANTI SEA-CLUTTER (POSITION OF' MINIMUM)

German Institute for Standardization

DIN 18232-9:2021-12 Smoke and heat control systems - Part 9: Minimum values for power supplies according to DIN EN 12101-10 and control equipment according to ISO 21927-9 / Note: DIN 18232-9 (2016-07) remains valid alongside this standard until 2023-06-30.
DIN EN 10314:2003 Method for the derivation of minimum values of proof strength of steel at elevated temperatures; German version EN 10314:2002
DIN EN 10314:2016-10 Method for the derivation of minimum values of proof strength of steel at elevated temperatures; German version EN 10314:2016
DIN 1305:1988-01 Mass, as weighed value, force, weight force, weight, load; concepts
DIN 1305:1988 Mass, as weighed value, force, weight force, weight, load; concepts
DIN 803:1977 Machine Tools; Feeds for Machine Tools; Nominal Values, Limiting Values, Transmission Ratios
DIN ISO 11843-4:2006 Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value (ISO 11843-4:2003; text in German, English)

Standard Association of Australia （SAA）

AS 1141.20.2:2000 Methods for sampling and testing aggregates - Average least dimension - Direct measurement (nominal sizes 5 mm and 7 mm)
AS 1141.20.1:2000 Methods for sampling and testing aggregates - Average least dimension - Direct measurement (nominal size 10 mm and greater)

RU-GOST R

GOST 21342.5-1987 Variable resistors. Methods of measuring minimal resistance, index of maximal attenuation and initial resistance jump
GOST ISO 11843-4-2005 Statistical methods. Capability of detection. Methodology for comparing the minimum detectable value with a given value

United States Navy

NAVY DOD-STD-2133 NOTICE 1-1988 CABLE ARRANGEMENT FOR MINIMUM STRAY MAGNETIC FIELD (METRIC)
NAVY DOD-STD-2134 VALID NOTICE 1-1989 STORAGE BATTERY ARRANGEMENT FOR MINIMUM STRAY MAGNETIC FIELD (METRIC)
NAVY DOD-STD-2134-1981 STORAGE BATTERY ARRANGEMENT FOR MINIMUM STRAY MAGNETIC FIELD (METRIC)

British Standards Institution (BSI)

BS ISO 11843-6:2013 Capability of detection. Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
BS ISO 11843-4:2003 Capability of detection - Methodology for comparing the minimum detectable value with a given value
BS EN 10314:2002 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
BS EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
BS ISO 11843-6:2019 Capability of detection. Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations

Korean Agency for Technology and Standards (KATS)

KS V ISO 14946-2005(2020) Small craft－Maximum load capacity
KS Q ISO 11843-4-2019 Capability of detection－Part 4：Methodology for comparing the minimum detectable value with a given value
KS V ISO 11592-2006(2021) Small craft less than 8 m length of hull－Determination of maximum propulsion power rating
KS V ISO 11592-2006(2016) Small craft less than 8 m length of hull－Determination of maximum propulsion power rating
KS Q ISO 11843-4-2009(2019) Capability of detection－Part 4：Methodology for comparing the minimum detectable value with a given value
KS E ISO 2325:2002 Coke－Size analysis(Nominal top size 20 mm or less)
KS V ISO 11592:2006 Small craft less than 8 m length of hull－Determination of maximum propulsion power rating
KS Q ISO 11843-4:2009 Capability of detection－Part 4：Methodology for comparing the minimum detectable value with a given value

Danish Standards Foundation

DS/ISO 14946:2021 Small craft – Maximum load capacity
DS/ISO 11843-4:2004 Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value
DS/EN ISO 11592:2001 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating
DS/EN 10314:2003 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
DS/EN ISO 14946:2021 Small craft – Maximum load capacity (ISO 14946:2021)

National Aeronautics and Space Administration (NASA)

NASA-CR-2270-1973 Extended hydrodynamic theory of the peak and minimum pool boiling heat fluxes

VN-TCVN

TCVN 5224-2009 Coke.Size analyses (Nominal top size 20 mm or less)

Defense Logistics Agency

DLA GG-T-356 B VALID NOTICE 2-2009 Thermometer, Self Indicating, Liquid in Glass, Minimum, (Meteorological)
DLA DSCC-DWG-03022-2003 RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0603

European Committee for Standardization (CEN)

EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures

HU-MSZT

MNOSZ 2738-1952 Architectural glass maximum measurements

ESDU - Engineering Sciences Data Unit

ESDU 66008-1966 Design for minimum weight. Struts of uniform section. Minimum weights for various sections.

GSO

OS GSO ISO 11843-4:2010 Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value
GSO OIML D28:2009 CONVENTIONAL VALUE OF THE RESULT OF WEIGHING IN AIR
OS GSO OIML D28:2009 CONVENTIONAL VALUE OF THE RESULT OF WEIGHING IN AIR
GSO ISO 11843-6:2015 Capability of detection -- Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations

International Organization for Standardization (ISO)

ISO 2325:1986 Coke; Size analysis (Nominal top size 20 mm or less)
ISO 2325:1972 Title missing - Legacy paper document
ISO 11592:2001 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating
ISO 11843-4:2003 Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value

International Telecommunication Union (ITU)

ITU-R S.726-1 FRENCH-1993 Maximum permissible level of spurious emissions from very small aperture terminals (VSAT)
ITU-R S.726-1 SPANISH-1993 Maximum permissible level of spurious emissions from very small aperture terminals (VSAT)
ITU-R S.728-1 SPANISH-1995 MAXIMUM PERMISSIBLE LEVEL OF OFF-AXIS e.i.r.p. DENSITY FROM VERY SMALL APERTURE TERMINALS (VSATs)
ITU-R S.728-1 FRENCH-1995 MAXIMUM PERMISSIBLE LEVEL OF OFF-AXIS e.i.r.p. DENSITY FROM VERY SMALL APERTURE TERMINALS (VSATs)

Lithuanian Standards Office

LST EN 10314-2003 Method for the derivation of minimum values of proof strength of steel at elevated temperatures

VDI - Verein Deutscher Ingenieure

VDI 2310 Blatt 38-2007 Maximale Immissions-Werte - Maximale Immissions-Werte fuer Kupfer zum Schutz der landwirtschaftlichen Nutztiere un der von ihnen stammenden Lebensmittel
VDI 2310 Blatt 35-2008 Maximum immission values - Maximum arsenic intake values for the protection of livestock

ES-UNE

UNE-EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures

Japanese Industrial Standards Committee (JISC)

JIS F 1036:2003 Small craft less than 8 m length of hull -- Determination of maximum propulsion power rating

CEN - European Committee for Standardization

EN ISO 11592:2001 Small Craft Less Than 8 m Length of Hull - Determination of Maximum Propulsion Power Rating

ZA-SANS

SANS 11592:2008 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating
SANS 11843-4:2009 Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value

Association of German Mechanical Engineers

VDI 2310 Blatt 35-2009 Maximum immission values - Maximum arsenic intake values for the protection of livestock and foods derived from them
VDI 2310 Blatt 37-1998 Maximum immission values - Maximum molybdenum immission values for livestock

GOSTR

GOST R 50779.81-2018 Statistical methods. Double sampling plans by attributes with minimal sample sizes indexed by PRQ and CRQ values

Others: