ventilator initial pressure

ventilator initial pressure, Total:145 items.

The international standard classification for "ventilator initial pressure" includes: Anaesthetic, respiratory and reanimation equipment , Respiratory protective devices , Protection against dangerous goods .

The Chinese standard classification for "ventilator initial pressure" includes: Communication network technical system , Extracorporeal circulation, artificial organ and prosthesis device , Articles for labor protection , Marking, packaging, transport and storage in general .

Professional Standard - Post and Telecommunication

YD/T 1522.2-2006 Technical Requirements for Session Initiation Protocol Part 2:Applications about call control based on SIP

Professional Standard - Medicine

YY 91108-1999 Pneumatic breathing machines
YY 91041-1999 Electrically powered breathing machines
YY/T 0461-2003 Breathing tubes intended for use with aneasthetic apparatus and ventilators
YY 0461-2003 Breathing tubes intended for use with aneasthetic apparatus and ventilators

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 30864-2014 Respiratory protection―Powered air-purifying respirator
GB/T 22052-2008 Test method for vapor pressure - Temperature relationship and initial decompostition temperature of liquids by isoteniscope

Group Standards of the People's Republic of China

T/ZZB 2887-2022 Fire resistant vacuum pressure breathing valve for petrol storage tank
T/ZZB 2989-2022 Intelligent high pressure compressors for breathing air

未注明发布机构

DIN EN 12021 E:2012 Respiratory equipment - Compressed gases for breathing apparatus
DIN 14963 E:2021-01 Firefighting and fire protection - Portable positive pressure ventilators
DIN EN 12021 E:2012-06 Respiratory equipment - Compressed gases for breathing apparatus

SCC

AS/NZS 4456.17:1997 Masonry units and segmental pavers - Methods of test, Method 17: Determining initial rate of absorption (suction)
AS 1226.8:1984 Methods of sampling and testing clay building bricks, Method 8: Method for determining initial rate of absorption (suction)
BS 4558:1970 Specification for positive pressure, powered dust respirators
AS 1226.9:1980 Methods of sampling and testing burnt clay and shale building bricks, Method 9: Method for determination of initial rate of absorption (suction)
AENOR UNE-EN 12021:2014 Respiratory equipment - Compressed gases for breathing apparatus
NS-EN 12021:2014 Respiratory equipment — Compressed gases for breathing apparatus
MIL MIL-PRF-32195-2005 LARGE CAPACITY HIGH PRESSURE BREATHING AIR COMPRESSOR (HPBAC)
AS 3572.12:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 12: Determination of initial failure pressure and initial hoop strength of glass filament reinforced plastics pipes
DANSK DS/EN 12021:2014 Respiratory equipment - Compressed gases for breathing apparatus
AWWA ACE59925 Using Hydraulic Models for Initial Distribution System Evaluations
CAN 3-Z168.5-M78-1978 Ventilateurs pulmonaires
MIL MIL-PRF-7605G-2013 Regulator, Oxygen, Demand, Pressure Breathing, Type A-21
UNE-EN 12021:1999 RESPIRATORY PROTECTIVE DEVICES. COMPRESSED AIR FOR BREATHING APPARATUS.
DANSK DS/ISO 16900-12:2016 Respiratory protective devices – Methods of test and test equipment – Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures
MIL MIL-PRF-7605H-2020 Regulator, Oxygen, Demand, Pressure Breathing, Type A-21
NS-EN 12021:1998 Respiratory protective devices — Compressed air for breathing apparatus
BS 4552-1:1970 Fuel filters for compression-ignition engines. Determination of pressure differential/flow characteristics and initial particle retention
CAN/CSA-Z168.5.1-1997(R2001) Anaesthesia Ventilators
BS PD ISO/TS 16976-4:2019 Respiratory protective devices. Human factors-Work of breathing and breathing resistance: Physiologically based limits
CSA Z180.1-M1978-1978 Compressed Breathing Air
NS-EN 12342:1998+A1:2009 Breathing tubes intended for use with anaesthetic apparatus and ventilators
CAN/CSA-Z168.5.1-1997(C2001) Anesthesia ventilators
CAN/CSA Z168.5.1-1997(R2001) Anaesthesia Ventilators
UNE-EN 12342:1999 BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS
CAN/CSA-Z168.5.1-M87-1987 Anaesthesia Ventilators
UNE-EN 12342:1999+A1:2010 Breathing tubes intended for use with anaesthetic apparatus and ventilators
NS-EN 12342:1998 Breathing tubes intended for use with anaesthetic apparatus and ventilators
12/30262167 DC BS EN 12021. Respiratory protective devices. Compressed gases for breathing apparatus
CAN/CSA-Z168.5.3-1997(R2006) Neonatal Ventilators
CAN/CSA Z168.5.3-1997(R2001) Neonatal Ventilators

CZ-CSN

CSN 77 0863-1987 Determination of the initial adhesive force

WRC - Welding Research Council

BULLETIN 443-1999 EXTERNAL PRESSURE: EFFECT OF INITIAL IMPERFECTIONS AND TEMPERATURE LIMITS

GSO

GSO ISO 10651-4:2015 Lung ventilators -- Part 4: Particular requirements for operator-powered resuscitators
BH GSO ISO 2434:2017 Compressed non-breathing air for use in aircraft
BH GSO EN 12021:2022 Respiratory equipment - Compressed gases for breathing apparatus
GSO EN 12021:2021 Respiratory equipment - Compressed gases for breathing apparatus
GSO ISO 16900-12:2021 Respiratory protective devices — Methods of test and test equipment — Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures
BH GSO ISO 16900-12:2022 Respiratory protective devices — Methods of test and test equipment — Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures
GSO ISO 12713:2013 Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers
GSO ISO 2434:2015 Compressed non-breathing air for use in aircraft

American Welding Society (AWS)

WRC 443:1999 External Pressure: Effect Of Initial Imperfections And Temperature Limits

ESDU - Engineering Sciences Data Unit

ESDU 68048-1968 Straight pipes under internal pressure. Effect of initial non-circularity on maximum stress.
STRUCT 02.01.37 B-1974 Estimation of the initial buckling stress under uniaxial compression of a corrugated sandwich panel.
STRUCT 02.01.35 B-1974 Estimation of the initial buckling stress under uniaxial compression of a skin with Z-section stringers.
ESDU 87036 B-1996 Elastic stresses and deflections for square plates with small initial curvature under uniform pressure on the concave or convex face.
ESDU 69003 A-1970 The buckling of flat plates under non-uniform compression. Symmetric distributions due to initial or thermal stress.
STRUCT 02.01.36 B-1974 Estimation of the initial buckling stress under uniaxial compression of a skin with top hat section stringers.
ESDU 69019-1969 Elastic stresses and deflections for long rectangular plates with small initial curvature under uniformly distributed normal pressure on the concave face.
STRUCT 02.04.05 A-1973 Initial buckling of flat plates under compression@ bending and shear.
STRUCT 02.01.34 B-1974 Estimation of the initial buckling stress under uniaxial compression of a skin with integral unflanged stiffeners.

International Organization for Standardization (ISO)

ISO 5369:1987 Breathing machines for medical use — Lung ventilators
ISO 16900-12:2016 Respiratory protective devices - Methods of test and test equipment - Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures

ES-AENOR

UNE 74-151-1992 Acoustics. Pure tone air conduction threshold audiometry for hearing conservation purposes

BR-ABNT

ABNT EB-23-1951 Initial resistance Portland cement. Brazilian specifications
ABNT EB-2-1940 Portland cement with high initial resistance. Brazilian specifications

Korean Agency for Technology and Standards (KATS)

KS V 4000-2013 Breath air compressor for marine use
KS V 4000-2012 Breath air compressor for marine use
KS W ISO 2434-2009(2014) Compressed non-breathing air for use in aircraft

RU-GOST R

GOST 12806-1977 Marine steam turbine plants. Initial steam conditions
GOST 22988.1-1978 Gas caunters. Method of threshold voltage measurement

Danish Standards Foundation

DS/ISO 5369:1989 Breathing machines for medical use. Lung ventilators
DS/EN 12021:1999 Respiratory protective devices - Compressed air for breathing apparatus
DS/EN 12342+A1:2009 Breathing tubes intended for use with anaesthetic apparatus and ventilators

Underwriters Laboratories (UL)

UL 705 BULLETIN-2018 UL Standard for Safety Power Ventilators
UL 705 BULLETIN-2014 UL Standard for Safety Power Ventilators
UL 705 BULLETIN-2007 UL Standard for Safety Power Ventilators
UL 705 BULLETIN-2006 UL Standard for Safety Power Ventilators
UL 705 BULLETIN-2003 UL Standard for Safety Power Ventilators
UL 705 BULLETIN-2012 UL Standard for Safety Power Ventilators
UL 705-2017 UL Standard for Safety Power Ventilators (Seventh Edition)

ZA-SANS

VC 8072-2003 Compulsory specification for respirators
SANS 277:2004 Respiratory protective devices - Compressed air for breathing apparatus

United States Navy

NAVY MIL-PRF-32195-2005 LARGE CAPACITY HIGH PRESSURE BREATHING AIR COMPRESSOR (HPBAC)
NAVY A-A-59774-2005 BREATHING AIR COMPRESSOR (BAC), PORTABLE, DIESEL
NAVY BB-A-1034 B NOTICE 2-2001 COMPRESSED AIR, BREATHING [Use In Lieu Of: NAVY BB-A-001034]
NAVY BB-A-1034 B-1985 COMPRESSED AIR, BREATHING
NAVY BB-A-1034 B (1)-1995 COMPRESSED AIR, BREATHING

German Institute for Standardization

DIN EN 12021:2014-07 Respiratory equipment - Compressed gases for breathing apparatus; German version EN 12021:2014
DIN EN 12021:1999 Respiratory protective devices - Compressed air for breathing apparatus; German version EN 12021:1998
DIN 14963:2021 Firefighting and fire protection - Portable positive pressure ventilators
DIN 14963:2021-09 Firefighting and fire protection - Portable positive pressure ventilators

British Standards Institution (BSI)

BS ISO 16900-12:2016 Respiratory protective devices. Methods of test and test equipment. Determination of volume-averaged work of breathing and peak respiratory pressures
BS EN 12021:2014 Respiratory equipment. Compressed gases for breathing apparatus
BS EN 12021:1999 Respiratory protective devices - Compressed air for breathing apparatus
BS ISO 16976-4:2023 Respiratory protective devices. Human factors. Work of breathing and breathing resistance: physiologically based limits
BS 1881-208:1996(1998) Testing concrete — Part 208 : Recommendations for the determination of the initial surface absorption of concrete
BS EN 794-3:1998+A2:2009 Lung ventilators - Particular requirements for emergency and transport ventilators
BS EN 794-3+A2:1999 Lung ventilators. Particular requirements for emergency and transport ventilators
BS EN 137:1993 Specification for respiratory protective devices: self-contained open-circuit compressed air breathing apparatus
BS EN 269:1995 Respiratory protective devices - Specification for powered fresh air hose breathing apparatus incorporating a hood

AENOR

UNE-EN 12021:2014 Respiratory equipment - Compressed gases for breathing apparatus

International Telecommunication Union (ITU)

ITU-T Y.1531-2007 SIP-based call processing performance Study Group 12

PL-PKN

PN L01261-1991 Compressed non-breathing air for use in aircraft

European Committee for Standardization (CEN)

EN 12021:2014 Respiratory equipment - Compressed gases for breathing apparatus
EN 12021:1998 Respiratory Protective Devices - Compressed Air for Breathing Apparatus
EN 14529:2005 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only

Standard Association of Australia （SAA）

AS/NZS ISO 16900.12:2021 Respiratory protective devices — Methods of test and test equipment, Method 12: Determination of volume-averaged work of breathing and peak respiratory pressures

Association Francaise de Normalisation

NF ISO 16900-12:2016 Respiratory protective devices - Test methods and test equipment - Part 12: determination of work of breathing as a function of respiratory volume and determination of peak respiratory pressures
NF S76-006*NF EN 12021:2014 Respiratory equipment - Compressed gases for breathing apparatus
NF S76-020-12*NF ISO 16900-12:2016 Respiratory protective devices - Methods of test and test equipment - Part 12 : determination of volume-averaged work of breathing and peak respiratory pressures
NF G07-148:1981 Textiles. Tests for fabrics. Determination of tear strength under live froce. Initiated tear.
NF ISO 16976-4:2023 Respiratory protective devices - Human factors - Part 4: work of breathing and respiratory resistance: physiological limits
NF G07-146:1981 TEXTILES. TESTING WOVEN FABRICS. DETERMINATION OF TEAR STRENGTH ON DYNAMOMETER. INITIATED TEAR.
NF G07-149:1981 TEXTILES. TESTING WOVEN FABRICS. DETERMINATION OF TEAR STRENGTH UNDER LIVE FORCE. INITIATED TEAR. (LOW CAPACITY DROP HAMMER).
NF S76-056:2006 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only.
NF S95-117-5:2009 Inhalational anaesthesia systems - Part 5 : anaesthetic ventilators.

American Society for Testing and Materials (ASTM)

ASTM F3407-20 Standard Test Method for Respirator Fit Capability for Negative-Pressure Half-Facepiece Particulate Respirators
ASTM F3407-21 Standard Test Method for Respirator Fit Capability for Negative-Pressure Half-Facepiece Particulate Respirators
ASTM D2879-10 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM F1977-22 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM F1977-04(2017) Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System

Lithuanian Standards Office

LST EN 12021-2000 Respiratory protective devices - Compressed air for breathing apparatus
LST EN 12342-2000+A1-2010 Breathing tubes intended for use with anaesthetic apparatus and ventilators

IN-BIS

IS 11363-1985 Anesthesia equipment and breathing tubes for ventilators
IS 10796-1983 Lung ventilator specifications

SE-SIS

SIS SS 87 457 20-1989 Lung ventilators

NATO - North Atlantic Treaty Organization

STANAG 7106-2002 CHARACTERISTICS OF GASEOUS BREATHING OXYGEN@ LIQUID BREATHING OXYGEN AND SUPPLY PRESSURES AND HOSES (ED 1)

U.S. Air Force

AIR FORCE MIL-PRF-7605 G-2013 REGULATOR, OXYGEN, DEMAND, PRESSURE BREATHING, TYPE A-21

Society of Automotive Engineers (SAE)

SAE AS452B-2014 Oxygen Mask Assembly, Demand and Pressure Breathing, Crew
SAE AS452A-2003 Oxygen Mask Assembly, Demand and Pressure Breathing, Crew
SAE AS1194-1997 Regulator Oxygen Diluter Demand, Automatic Pressure Breathing

AASHTO - American Association of State Highway and Transportation Officials

TP6-1993 Standard Test Method for the Measurement of Initial Asphalt Adsorption and Desorption in the Presence of Moisture (Edition 1A)

North Atlantic Treaty Organization Standards Agency

STANAG 7106-2005 CHARACTERISTICS OF GASEOUS BREATHING OXYGEN, LIQUID BREATHING OXYGEN AND SUPPLY PRESSURES, HOSES AND REPLENISHMENT COUPLINGS

National Aeronautics and Space Administration (NASA)

NASA UFGS-23 82 23-2008 UNIT VENTILATORS
NASA UFGS-23 82 23.00 40-2008 UNIT VENTILATORS
NASA-TM-X-72843-1976 Effects of thickness on the aerodynamic characteristics of an initial low-speed family of airfoils for general aviation applications

US-FCR

FCR UFGS-23 82 23.00 40-2014 UNIT VENTILATORS

VDI - Verein Deutscher Ingenieure

VDI 2044-1966 Acceptance and performance tests on ventilators (VDI ventilator rule)

DIN

DIN EN 12342:1998 Breathing tubes intended for use with anaesthetic apparatus and ventilators

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI)

AHRI 840-1998 Unit Ventilators

American National Standards Institute （ANSI)

ANSI/ASTM F1977:2004 Test Method for Determining Initial Fractional Filtration Efficiency of a Vacuum Cleaner System

SAE - SAE International

SAE AS1194-1970 Regulator Oxygen@ Diluter Demand@ Automatic Pressure Breathing

(U.S.) Ford Automotive Standards

FORD WSS-M2C948-A-2014 OIL, ENGINE, INITIAL FILL SAE 5W-20 ***TO BE USED WITH FORD WSS-M99P1111-A***

Others: The initial pressure of the steam boiler