libs experimental device diagram

libs experimental device diagram, Total:314 items.

The international standard classification for "libs experimental device diagram" includes: Installations and equipment for waste disposal and treatment , On-board equipment and instruments , Technical drawings in general , Electrical engineering in general , Graphical symbols , Agricultural machines and equipment in general , Alarm and warning systems , Tractive stock .

The Chinese standard classification for "libs experimental device diagram" includes: Laboratory instrument and vacuum instrument in general , Specifications for pollution control , Basic standards and general methods , Basic standards and general methods , Farming and foresting machinery and tools , Guard and alarm system , Diesel locomotives .

机械电子工业部

JB/T 5876.1-1991 Electric transmission device drawing system diagram and circuit diagram
JB/T 5876.3-1991 Electrical transmission drawings wiring diagrams and wiring tables
JB/T 5876.2-1991 Electric transmission device drawing and assembly drawing

Group Standards of the People's Republic of China

T/CIPR 074-2023 Experimental device for oil-pneumatic suspension system
T/QGCML 4506-2024 Electrical and Electronic Teaching Experimental Device
T/QGCML 336-2022 Alumina decomposition self-controlled heating and stirring experimental device
T/QGCML 2036-2023 Teaching laboratory ventilation device

未注明发布机构

DIN 1988-600 E:2020-11 Codes of practice for drinking water installations - Part 600: Drinking water installations in connection with fire fighting and fire protection installations; DVGW code of practice
DIN 12899-2:1990 Laboratory installations; emergency shower installations; eye showers, safety requirements, tests
DIN EN 14366 E:2002-04 Laboratory measurement of noise from waste water installations
DIN 1988-6 E:2000-11 Codes of practice for drinking water installations (TRWI) - Part 6: Fire fighting and fire protection installations; DVGW code of practice
DIN 1988-6:1988 Codes of practice for drinking water installations (TRWI) - Part 6: Fire fighting and fire protection installations; DVGW code of practice
DIN EN 71-5 E:2012-04 Safety of toys - Part 5: Chemical toys (sets) other than experimental sets

Professional Standard - Urban Construction

CJ/T 3075.2-1998 Laboratory of gas burning appliances_Test equipment and device

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16677-1996 Transfer equipment of alarm picture signal through cable
GB/T 32700-2016 General design specification for biological experiment facility in space
GB/T 4728.11-2022 Graphical symbols for electrical diagrams—Part 11：Architectural and topographical
GB/T 4728.11-2008 Graphical symbols for diagrams - Part 11: Architectural and topographical installation plans and diagrams
GB/T 4728.11-2000 Graphical symbols for diagrams--Part 11:Architectural and topographical installation plans and diagrams
GB/T 25400-2010 Trailed agricultural vehicles—Brakes and braking devices—Laboratory test method
GB/T 20063.5-2006 Graphical symbols for diagrams - Part 5: Measurement and control devices
GB/T 20063.13-2009 Graphical symbols for diagrams—Part 13:Devices for material processing
GB/T 41962-2022 Technical specification of storage devices for laboratory waste
GB/T 29800-2013 Wallmap of Highway Traffic Surveillance and Control System

Professional Standard - Chemical Industry

HG/T 21581-1995HK06 Flange pressure taking and throttling device installation manual

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40378-2021 Technical specification of treatment equipments for chemistry laboratory waste water

Professional Standard - Machinery

JB/T 12273-2015 Cathodic electrophoretic coating film preparation experimental device technical conditions

国家市场监督管理总局

RB/T 010-2019 General requirements for evaluation of laboratory animal barrier and isolator devices

Taiwan Provincial Standard of the People's Republic of China

CNS 12368-1988 Method of Test for Fiber Optic Devices ( FOTP-44 Refractive Index Profile, Refracted Ray Method)
CNS 13802-11-1997 Graphical symbols for diagrams (Architectural and topographical installation plans and diagrams)
CNS 12367-1988 Method of Test for Fiber Optic Devices ( FOTP-43 Output Near-Fiber Raiation Pattern Measuremnnt)
CNS 13802.11-1997 Graphical symbols for diagrams (Architectural and topographical installation plans and diagrams)

Henan Provincial Standard of the People's Republic of China

DB41/T 1494-2017 Atlas of Construction and Installation Standards of Lightning Protection Devices for Ancient Buildings

Professional Standard - Railway

TB/T 3098-2004 Manual for the carrying out of approval tests of railway motive power units

Professional Standard - Ocean

HY/T 0406-2024 The testing method of oscilating body wave energy devices in laboratory

Professional Standard - Construction Machinery

JJ 60-1987 Experimental method of actuation time of measuring unit of earth moving machines

SCC

DANSK DS/CEN/TS 17441:2020 Laboratory installations – Ventilation systems in laboratories
BS PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
SN-CEN/TS 17441:2020 Laboratory installations — Ventilation systems in laboratories
BS PD CEN/TR 16589:2013 Laboratory installations. Capture devices with articulated extract arm
DANSK DS/CEN/TR 16589:2013 Laboratory installations - Capture devices with articulated extract arm
SN-CEN/TR 16589:2013 Laboratory installations - Capture devices with articulated extract arm
UNE 100212:1990 FANS. EQUIPMENTS AND SETUPS FOR LABORATORY TESTING.
DANSK DS/EN 14366:2004 Laboratory measurement of noise from waste water installations
AENOR UNE-EN 14366:2005 Laboratory measurement of noise from waste water installations
NS-EN 14366:2004 Laboratory measurement of noise from waste water installations
AENOR UNE-EN 60617-8:1997 Graphic symbols for diagrams. Part 8: Measuring devices, lamps and signaling devices.
BS EN 1574:1996 EDI. Message. Bayplan/stowage plan occupied and empty locations (BAPLIE)
DANSK DS/EN 14366+A1:2019 Laboratory measurement of noise from waste water installations
DIN EN 14366/A1 E:2018 Draft Document - Laboratory measurement of noise from waste water installations; German and English version EN 14366:2004/prA1:2018
NS-EN 14366:2004+A1:2019 Laboratory measurement of noise from waste water installations
BS EN 60617-3:1996 Graphical symbols for diagrams-Conductors and connecting devices
DANSK DS/EN ISO 7519:1997 Technical drawings – Construction drawings – General principles of presentation for general arrangement and assembly drawings
BS 5665-4:1990 Safety of toys-Specification for experimental sets for chemistry and related activities
BS EN 60617-8:1996 Graphical symbols for diagrams-Measuring instruments, lamps and signalling devices
CEI 3-19:2005 Graphic signs for diagrams - Control and protection equipment and devices
DANSK DS/ISO 5696:1986 Trailed agricultural vehicles - Brakes and braking devices - Laboratory test method
AENOR UNE-EN 60617-3:1997 Graphic symbols for diagrams. Part 3: Conductors and connecting devices.
CEI 3-20:2005 Graphic signs for diagrams - Measuring instruments, lamps and signaling devices
DANSK DS/EN 60617-3:1998 Graphical symbols for diagrams - Part 3: Conductors and connecting devices
UNE-EN 60617-3:1997 GRAPHICAL SYMBOLS FOR DIAGRAMS. PART 3: CONDUCTORS AND CONNECTING DEVICES.
NS-EN ISO 7519:1996 Technical drawings - Construction drawings - General principles of presentation for general arrangement and assembly drawings (ISO 7519:1991)
UNE-EN 71-4:2010 Safety of toys - Part 4: Experimental sets for chemistry and related activities
NS-EN 71-4:2013 Safety of toys — Part 4: Experimental sets for chemistry and related activities

Association Francaise de Normalisation

XP X15-300*XP CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
XP CEN/TS 17441:2020 Laboratory installations - Laboratory ventilation systems
FD X08-040-2:2009 Graphic symbols and pictograms - Information and safety devices - Part 2: experimental visual safety signals
NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
FD X08-040-1:2008 Graphic symbols and pictograms - Information and safety devices - Part 1: approach to experimentation or validation of new visual health/safety signals
NF S31-907/IN1*NF EN 14366/IN1:2019 Laboratory measurement of noise from waste water installations
NF S31-907*NF EN 14366+A1:2019 Laboratory measurement of noise from waste water installations
NF S31-907:2005 Laboratory measurement of noise from waste water installations.
NF S51-216:2013 Safety of toys - Part 5: chemical toys (sets) other than experimental sets
NF F55-205:1997 Fixed railway installations - Graphic symbols for signaling diagrams
NF L07-181:1970 Symboles graphiques pour installations mécaniques
NF EN 14366+A1:2019 Mesurage en laboratoire du bruit émis par les installations d'évacuation des eaux usées
NF EN 14366/IN1:2019 Mesurage en laboratoire du bruit émis par les installations d'évacuation des eaux usées
NF ISO 16873:2012 Hydraulic transmissions - Pressure switches - Installation plans
FD X15-055*FD CEN/TR 16589:2014 Laboratory installations - Capture devices with articulated extract arm
NF EN 13274-2:2019 Respiratory protective devices - Test methods - Part 2: practical performance tests
NF ISO 15218:2003 Pneumatic transmissions - 3/2 solenoid valves - Installation plan
NF ISO 6264:2000 Hydraulic transmissions - Pressure limiters - Installation plan
NF X15-210:1996 Laboratory installations. Collective protection means. Classification according to containment capacity.
NF F55-204:1991 Fixed railway equipment. Drawings and diagrams for electrical signalling installings. Graphic symbols.
NF UTE C15-559:2006 Installations électriques à basse tension - Guide pratique - Installation d'Éclairage en Très Basse Tension
NF X15-211:2009 Installations de laboratoire - Sorbonnes à recirculation - Généralités, classification, prescriptions
NF ISO 4401:2005 Hydraulic transmissions - Four-port distributors - Installation plan
NF C03-203:1997 Graphical symbols for diagrams. Part 3 : conductors and connecting devices.
NF P02-202*NF EN ISO 7519:1997 Technical drawings. Construction drawings. General principles of presentation for general arrangement and assembly drawings.
NF S51-216:1993 Safety of toys. Part 5: chemical toys (sets) other than experimental sets

German Institute for Standardization

DIN CEN/TS 17441:2020-07 Laboratory installations - Ventilation systems in laboratories; German version CEN/TS 17441:2020
DIN EN 14366:2020-02 Laboratory measurement of noise from waste water installations; German version EN 14366:2004+A1:2019 / Note: To be replaced by DIN EN 14366-1 (2022-02).
DIN 12880:2007 Electrical laboratory devices - Heating ovens and incubators
DIN V 6868-57:2001 Image quality assurance in diagnostic X-ray departments - Part 57: Acceptance testing for image display devices
DIN 19051-2:1980 Tests for reprographic use; fundamental assembly of typographical characters for legibility tests and test chart for destination of resolving power
DIN EN 14366:2005 Laboratory measurement of noise from waste water installations; German version EN 14366:2004
PAS 1054-2005 Requirements and testing of digital mammographic X-ray equipment
DIN CEN/TR 16589:2014 Laboratory installations - Capture devices with articulated extract arm; German version CEN/TR 16589:2013
DIN EN 13274-2:2001 Respiratory protective devices - Methods of test - Part 2: Practical performance tests; German version EN 13274-2:2001
DIN 12980:2005 Laboratory furniture - Safety cabinets for handling cytotoxic substances
DIN ISO 7519:1992 Technical drawings; construction drawings; general principles of presentation for general arrangement and assembly drawings; identical with ISO 7519:1991
DIN 74000:1992 Hydraulic braking systems; dual circuit brake systems; symbols for brake circuits diagrams
DIN 4000-52:1986 Tabular layouts of article characteristics for mechanical closing devices
DIN EN 71-5:2013 Safety of toys - Part 5: Chemical toys (sets) other than experimental sets; German version EN 71-5:2013
DIN EN 71-5:2015 Safety of toys - Part 5: Chemical toys (sets) other than experimental sets; German version EN 71-5:2015
DIN 1988-600:2010 Codes of practice for drinking water installations - Part 600: Drinking water installations in connection with fire fighting and fire protection installations; DVGW code of practice
DIN 15708-1:2010 Electronic still picture - Quality check of digital RGB image data - Part 1: Output on printing devices
DIN 1988-6:2002 Codes of practice for drinking water installations (TRWI) - Part 6: Fire fighting and fire protection installations; DVGW code of practice
DIN EN 71-4:2021-03 Safety of toys - Part 4: Experimental sets for chemistry and related activities; German version EN 71-4:2020 / Note: DIN EN 71-4 (2013-05) remains valid alongside this standard until 2021-12-31.

European Committee for Standardization (CEN)

CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
PD CEN/TR 16589:2013 Laboratory installations - Capture devices with articulated extract arm
EN 14366:2004 Laboratory measurement of noise from waste water installations
EN 13274-2:2001 Respiratory protective devices - Methods of test - Part 2: Practical performance tests
prEN 16589-1-2021 Laboratory local exhaust devices - Part 1: Articulated extraction arm

Military Standards (MIL-STD)

DOD A-A-51211-1985 STAND, LABORATORY APPARATUS SUPPORT
DOD MIL-C-37106 VALID NOTICE 1-1989 CASE, MEDICAL LABORATORY EQUIPMENT SET
DOD MIL-C-37106-1974 CASE, MEDICAL LABORATORY EQUIPMENT SET
DOD A-A-54336-1991 CHART SET, ANATOMICAL
DOD A-A-53805-1989 ELECTRODE SET, ELECTROCARDIOGRAPH
DOD A-A-53474-1988 BEAD, GLASS, LABORATORY, (PLASTIC SPECTACLE FRAME WARMER)

American Society for Testing and Materials (ASTM)

ASTM E920-97(2003) Standard Specification for Commercially Packaged Laboratory Apparatus
ASTM E921-97(2003) Standard Specification for Export Packaged Laboratory Apparatus
ASTM E920-97(2013) Standard Specification for Commercially Packaged Laboratory Apparatus
ASTM E1325-02(2008) Standard Terminology Relating to Design of Experiments
ASTM E921-97(2010) Standard Specification for Export Packaged Laboratory Apparatus
ASTM E920-97(2008) Standard Specification for Commercially Packaged Laboratory Apparatus
ASTM E694-18 Standard Specification for Laboratory Glass Volumetric Apparatus
ASTM E1325-02 Standard Terminology Relating to Design of Experiments
ASTM C1060-23 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
ASTM E1222-90(2002) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
ASTM E1222-90(1996)e1 Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
ASTM G151-06 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM G151-00 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM G151-97 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM G151-09 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM E801-01 Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices

HU-MSZT

MNOSZ 6646-1952 Laboratory glass fixtures
MSZ 3534-1952 White tile laboratory pour device
MNOSZ 3535-1952 White tile laboratory ventilation unit
MSZ 6640-1972 Design requirements for laboratory fixtures
MSZ 6863/4-1984 Mechanical drawing of manned device
MNOSZ 6621-1956 Process requirements for laboratory sinks and accessories

RO-ASRO

STAS 11381/22-1988 Graphical svmhoJs for diagrams SWITCH GKAR AND CONTUOI.GKAR
STAS 5693-1971 Laboratory glassware ACETYLATION APPAUATUS
STAS 12120/4-1983 Electrical installations DIAGRAMS, CHARTS, TABLES Circuit diagrams
STAS 10909-1977 Laboratory glassware BURETTES FOR OR SAT APPARATUS
STAS 11381/24-1988 Graphical symbols for electric diagrams PROTECTIVE DEVICES
STAS SR ISO 7519:1996 Technical drawings. Construction drawings. General principles of presentation for general arrangement and assembly drawings
SR ISO 4172:1996 Technical drawings. Construction drawings. Drawings for the assembly of prefabricated structures
STAS 9134-1984 TAPE DIAGRAM FOR RECORDING APPARATUS
STAS 1590/10-1974 SEMICONDUCTOR DEVICES Graphical symbols
STAS 12120/6-1983 Electrical installations DIAGRAMS, CHARTS, TABLES Unit wiring diagrams and tables
STAS 12185-1984 Techni cal drawings DRAWINGS FOR LABORATORY GLASSWARE
STAS 12120/5-1983 Electrical installations DIAGRAMS, CHARTS, TABLES Preparation of interconnection diagrams and tables
STAS 11200/5273-1990 Graphical symbols. Graphical symbol: automatic change over unit
STAS 11200/5339-1989 Graphical symbols GRAPHICAL SYMBOL FOR EMMITING X RAY SOURCE ASSEMBLY
STAS 12120/1-1983 Electrical installationsDIAGRAMS, CHAHTS AND TABLES Definitions and clasification
STAS 12120/2-1988 Electrical Installations DIAGRAMS CHARTS AND TABLES Identification of items
STAS 11071/15-1985 Block diagrams kf hierarchy BLOCK DIAGREM OF HIERARCHY KF MEASURLNG LXSTRUMENTSFOR HARDNESS

American National Standards Institute （ANSI)

ANSI/ASSE 1035-2002 Laboratory Faucet Backflow Preventer
ANSI/ASHRAE 130-2016 Laboratory Methods of Testing Air Terminal Units
ANSI/ASSE 1035-2008 Performance Requirements for Laboratory Faucet Backflow Preventers
ANSI Y32.2.6-1950 Graphical symbols for heat-power apparatus
ANSI/AAMI EC11R-1991 Diagnostic Electrocardiographic Devices

SE-SIS

SIS SEN 24-1938 Graphic logo, illustration, banana device
SIS SS IEC 617-7:1986 Graphical symbols for diagrams — Switchgear, controlgear and protective devices
SIS SEN 04 05 20 Electroceramic, experimental qualitative, linear thermal expansion device
SIS SS 03 22 45-1987 Construction drawings - Representation on drawings for general arrangement and assembly

CZ-CSN

CSN 01 3450-1994 Drawings of sanitary instalations
CSN 01 3452-1983 Drawings of central heating instalatlons
CSN 01 3469-1989 Drawings of water works and water power works. Constructional part
CSN 73 0185-1967 Drawings of water works and water power works. Constructional part
CSN ON 73 0187-1966 Drawings of water works and water power works. Technological part.
CSN 01 3315-1979 Graphical symbols for electrical diagrams. Operating devices for electromechanical apparatus
CSN 73 0112-1966 Drawings of ventilating and air conditioning installations
CSN 01 3454-1983 Drawings of ventilatlons and air conditioning installations
CSN 34 5543-1972 Graphical symbols for electrical diagrams of railway signalling and interlocking devices

British Standards Institution (BSI)

BS EN 14366:2004+A1:2019 Laboratory measurement of noise from waste water installations
BS EN 143:2021 Respiratory protective devices. Particle filters. Requirements, testing, marking
BS EN 14366:2004 Laboratory measurement of noise from waste water installations
BS EN 143:2000(2006) Laboratory measurement of noise from waste water installations
BS EN 14375:2005 Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing
BS EN 14375:2003 Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing
BS EN 13274-2:2019 Respiratory protective devices - Methods of test - Practical performance tests
BS EN 13274-2:2001 Respiratory protective devices - Methods of test - Practical performance tests
BS EN 60872-1:1999 Maritime navigation and radiocommunication equipment and systems - Radarp lotting aids - Automatic radar plotting aids (ARPA) - Methods of testing and required test results
BS ISO 14617-5:2002 Graphical symbols for diagrams. Measurement and control devices
BS EN 60352-5:2008 Solderless connections — Part 5: Press-in connections — General requirements, test methods and practical guidance
BS ISO 14617-4:2002 Graphical symbols for diagrams. Actuators and related devices
BS EN 60352-2:2006 Solderless connections - Crimped connections - General requirements, test methods and practical guidance
BS EN 60352-2:2006+A1:2013 Solderless connections - Crimped connections - General requirements, test methods and practical guidance
BS EN ISO 7519:1997(1999) Technical drawings — Construction drawings — General principles of presentation for general arrangement and assembly drawings
BS EN 71-5:2013 Safety of toys. Chemical toys (sets) other than experimental sets
BS EN 71-5:2015 Safety of toys. Chemical toys (sets) other than experimental sets
BS ISO 8083:2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements
BS EN ISO 3449:2005 Earth-moving machinery - Falling object protective structures - Laboratory tests and performance requirements
BS EN ISO 3449:2008 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements
BS EN ISO 3449:2009 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements
BS EN 71-5:1993+A2:2009 Safety of toys - Part 5: Chemical toys (sets) other than experimental sets
BS EN ISO 3822-4:1997 Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Mounting and operating conditions for special appliances
BS EN 60617-3:1996(1998)*IEC 617-3:1996 Graphical symbols for diagrams — Part 3 : Conductors and connecting devices
BS EN ISO 10628:2001 Flow diagrams for process plants - General rules

AENOR

UNE-EN 14366:2005 Laboratory measurement of noise from waste water installations
UNE-EN ISO 7519:1997 TECHNICAL DRAWINGS. CONSTRUCTION DRAWINGS. GENERAL PRINCIPLES OF PRESENTATION FOR GENERAL ARRANGEMENT AND ASSEMBLY DRAWINGS (ISO 7519:1991).

International Organization for Standardization (ISO)

ISO 14617-4:2002 Graphical symbols for diagrams - Part 4: Actuators and related devices
ISO 16972:2010 Respiratory protective devices - Terms, definitions, graphical symbols and units of measurement
ISO 8083:1989 Machinery for forestry; falling-object protective structures; laboratory tests and performance requirements
ISO 8083:2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements
ISO 14617-13:2004 Graphical symbols for diagrams - Part 13: Devices for material processing
ISO 14617-5:2002 Graphical symbols for diagrams - Part 5: Measurement and control devices
ISO 5696:1984 Trailed agricultural vehicles; Brakes and braking devices; Laboratory test method
ISO 7519:1991 Technical drawings; construction drawings; general prinicples of presentation for general arrangement and assembly drawings
ISO 8124-11:2019 Safety of toys — Part 11: Chemical toys (sets) other than experimental sets

AT-ON

ONORM E 1007-1987 Graphical symbols for diagrams; symbols for switchgears, controlgears and protective devices

ES-UNE

UNE-EN 14366:2005+A1:2020 Laboratory measurement of noise from waste water installations

Lithuanian Standards Office

LST EN 14366-2005 Laboratory measurement of noise from waste water installations
LST EN ISO 7519:2001 Technical drawings - Construction drawings - General principles of presentation for general arrangement and assembly drawings (ISO 7519:1991)

Danish Standards Foundation

DS/EN 14366:2004 Laboratory measurement of noise from waste water installations
DS/EN ISO 7519:1997 Technical drawings - Construction drawings - General principles of presentation for general arrangement and assembly drawings
DS/ISO 5696:1986 Trailed agricultural vehicles. Brakes and braking devices. Laboratory test method
DS 5009.03:1984 Graphical symbols for diagrams. Part 3: Conductors and connecting devices

US-FCR

FCR FED H-08-9 CHAP 226-1979 ELECTROENCEPHALOGRAPHY LABORATORY
FCR FED H-08-4 VOL 3 SEC II 633.0-1988 WATER FLOW MEASURING DEVICE INSTALLATION DETAIL
FCR FED H-08-5 CHAP 226 TRANSMITTAL NO.79-1978 ELECTROENCEPHALOGRAPHY LABORATORY, TRANSMITTAL NO. 79

Defense Logistics Agency

DLA A-A-52034 A VALID NOTICE 2-2007 DRAFTING INSTRUMENT SETS AND DRAFTING INSTRUMENTS
DLA A-A-52034 A-1992 DRAFTING INSTRUMENT SETS AND DRAFTING INSTRUMENTS
DLA A-A-52034 A VALID NOTICE 1-2001 DRAFTING INSTRUMENT SETS AND DRAFTING INSTRUMENTS

Canadian General Standards Board （CGSB)

CGSB 72.28-M88-CAN/CGSB-1988 Setting Up and Maintaining Micrographic Units

Korean Agency for Technology and Standards (KATS)

KS X IEC 60617-8-2003(2008) Graphical symbols for diagrams－Part 8：Measuring instruments, lamps and signalling devices
KS B 0082-1996 Vacuum technology-Graphical symbols
KS A ISO 8545-2013 Technical drawings－Installations－Graphical symbols for automatic control
KS C 1224-1990 Ambulatory ECG Recording System (Holter System)
KS A ISO 8545:2013 Technical drawings－Installations－Graphical symbols for automatic control
KS A ISO 8545-2002(2012) Technical drawings－Installations－Graphical symbols for automatic control
KS R 1140-2001(2021) Standard reference test specimens for calibratinga laboratory light exposure apparatus
KS R 1140-2001(2016) Standard reference test specimens for calibratinga laboratory light exposure apparatus
KS F ISO 7519-2003(2018) Technical drawings－Construction drawings－General principles of presentation for general arrangement and assembly drawings
KS C 1224-1990(2010) Ambulatory ECG Recording System (Holter System)
KS F ISO 7519-2023 Technical drawings — Construction drawings — General principles of presentation for general arrangement and assembly drawings
KS B ISO 8083:2017 Machinery for forestry－Falling-object protective structures(FOPS)－Laboratory tests and performance requirements
KS B ISO 8083:2006 Machinery for forestry－Falling-object protective structures－Laboratory tests and performance requirements
KS B ISO 5696:2016 Trailed agricultural vehicles－Brakes and braking devices－Laboratory test method
KS B ISO 5696:2001 Trailed agricultural vehicles-Brakes and braking devices-Laboratory test method
KS C IEC 61240-2023 General principles for preparing block diagrams of surface mount devices for frequency control and selection of piezoelectric devices
KS C IEC 61240:2002 Piezoelectric devices－Preparation of outline drawings of surface－mounted devices(SMD) for frequency control and selection－General rules
KS B ISO 5696-2021 Trailed agricultural vehicles－Brakes and braking devices－Laboratory test method
KS X IEC 60617-3-2003(2008) Graphical symbols for diagrams－Part 3：Conductors and connecting devices
KS B ISO 5696-2016(2021) Trailed agricultural vehicles－Brakes and braking devices－Laboratory test method

RU-GOST R

GOST 23456-1979 Closed-circuit television systems. Methods for measuring and testing
GOST 2.752-1971 Unified system for design documentation. Graphic designations in diagrams. Telemechanic devices
GOST 2.744-1968 Unified system of design documentation. Graphic identifications in schemes. Electrical ignition devices
GOST 27719-1988 Earth-moving machinery. Fallingobject protective
GOST 2.763-1985 Unified system for design documentation. Graphic designations in electric diagrams. Devices of pulse-code modulation
GOST 29224-1991 Liquid-in-glass laboratory thermometers. Principles of design, construction and use
GOST 3.1107-1981 Unified system of technological documentation. Bases, clamps and installing arrangements. Symbolic representation

IT-UNI

UNI 7028-1972 Pictorial markings on ship's machinery plant diagrams
UNI 9511-P3-1989 Technical drawings. Equipment marking. Pictorial markings for automatic devices

GSO

GSO OIML R89:2005 ELECTROENCEPHALOGRAPHS — METROLOGICAL CHARACTERISTICS — METHODS AND EQUIPMENT FOR VERIFICATION
BH GSO ISO 7519:2016 Technical drawings -- Construction drawings -- General principles of presentation for general arrangement and assembly drawings
OS GSO ISO 7519:2013 Technical drawings -- Construction drawings -- General principles of presentation for general arrangement and assembly drawings
GSO ISO 2834-1:2015 Graphic technology -- Laboratory preparation of test prints -- Part 1: Paste inks
GSO ISO 3822-3:2013 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for in-line valves and appliances
GSO ISO 7519:2013 Technical drawings -- Construction drawings -- General principles of presentation for general arrangement and assembly drawings
OS GSO ISO 14617-11:2015 Graphical symbols for diagrams -- Part 11: Devices for heat transfer and heat engines
BH GSO ISO 14617-11:2017 Graphical symbols for diagrams -- Part 11: Devices for heat transfer and heat engines
GSO ISO 14617-11:2015 Graphical symbols for diagrams -- Part 11: Devices for heat transfer and heat engines
GSO EN 71-4:2024 Safety of toys - Part 4: Experimental sets for chemistry and related activities
BH GSO ISO 8124-10:2023 Safety of toys — Part 10: Experimental sets for chemistry and related activities
GSO ISO 8124-10:2022 Safety of toys — Part 10: Experimental sets for chemistry and related activities

PL-PKN

PN E01211-1990 Switching devices Graphical symbols
PN E01200-11-1992 Graphical symbols for diagrams Architectural and topographical installations plans and diagrams
PN E01227-1974 Thyris?or driye sysfems Graphical symbols
PN E01200-07-1992 Graphical symbols for diagrams. Switchgear, controlgear and protective devices
PN E01200-08-1992 Graphical symbols for diagrams Measuring instruments lamps and signalling devices
PN N01630-1989 Technical drawings. The principles of drawing for elements, assemblies and optical diagrams

DIN

DIN EN 14366:2020 Laboratory measurement of noise from waste water installations; German version EN 14366:2004+A1:2019

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 130-2016 Laboratory Methods of Testing Air Terminal Units
ASHRAE SE-99-7-1-1999 Floor-Supply Displacement Air-Conditioning: Laboratory Experiments
ASHRAE KC-03-4-4-2003 Development of a Stereoscopic Particle Image Velocimetry System for Full-Scale Room Airflow Studies@ Part II: Experimental Setup
ASHRAE CH-99-7-3-1999 Design Considerations of a Large Central Laboratory Exhaust

IEC - International Electrotechnical Commission

IEC 60617-8:1996 Graphical Symbols for Diagrams Part 8: Measuring Instruments@ Lamps and Signalling Devices (Edition 2.0)

KR-KS

KS B ISO 5696-2016 Trailed agricultural vehicles－Brakes and braking devices－Laboratory test method

SG-SPRING SG

SS 202 Pt.6-1992 Graphical Symbols For Electrical, Electronics And Telecommunications Diagrams Part 6 : Switchgear, Controlgear And Protective Devices
SS 608-2015 Code of practice for gas installation

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0100-723-2005 Erection of low-voltage installations - Requirements for special installations or locations - Part 723: Class-rooms with experimental equipment

Japanese Industrial Standards Committee (JISC)

JIS A 1424-1:1998 Method for laboratory tests on noise emission from appliances and equipments used in Water Supply Installations
JIS A 1424-1:2015 Method for laboratory tests on noise emission from appliances and equipments used in water supply installations
JIS C 6828:2004 End-face image analysis procedure for the calibration of optical fiber geometry test sets
JIS F 8011:1990 Graphical symbols for electrical apparatus (power) for marine engineering drawings
JIS T 1213:1984 Photic stimulators for electroencephalographs
JIS Z 8617-13:2008 Graphical symbols for diagrams -- Part 13: Devices for material processing
JIS C 0617-3:2011 Graphical symbols for diagrams -- Part 3: Conductors and connecting devices
JIS B 9525:1987 Monochrome test chart for group 4 facsimile apparatus
JIS Z 8617-5:2008 Graphical symbols for diagrams -- Part 5: Measurement and control devices
JIS A 1424-2:1998 Method for laboratory tests on noise emission from appliances and equipments used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps and mixing valves

FI-SFS

SFS 3208-1979 Motorized forklift. Icons for operating devices and controls
SFS B.2.19-1960 Display of mechanical drawings of transmission parts
SFS 5428-1988 Air conditioning device. Airflow and air supply. Laboratory aerodynamic testing and terminal unit air changes

IN-BIS

IS 5527-1969 Sugar factory laboratory layout diagram
IS 8000 Pt.4-1976 Shape and position tolerances on engineering drawings Part IV Examples of markings on drawings

YU-JUS

JUS N.R1.520-1988 Seml?ouductor devices. Preparat ion of draurings

CH-SNV

VSM 34166-1947 drawing. Shape and position tolerances. Practical examples of drawing records

NO-SN

NS 8342-1987 Construction drawings - Installations - Graphical symbols for automatic control

VN-TCVN

TCVN 6238-4-1997 Safety of toys.Experimental sets for chemistry and related activities

Standard Association of Australia （SAA）

AS 8124.4:2003(R2013) Experimental setup for toy safety chemistry and related activities

American Society of Mechanical Engineers (ASME)

ASME Y32.2.6-1950 Graphical symbols for heat-power apparatus

Indonesia Standards

SNI 10-0971-1989 Fire safety appliances in ships, Graphical symbols

National Electrical Manufacturers Association（NEMA)

NEMA ICS 19-2002 Diagrams, Device Designations and Symbols for Industrial Controls and Systems
NEMA EW 4-2009 Graphic Symbols for Arc Welding and Cutting Apparatus